Satellite U505 - S2960 - drive external Supermulti cannot burn

Similar Questions

• Bluetooth for Satellite U505-S2960 module

  Hello

  I have Toshiba Satellite U505-S2960, but not brings Bluetooth. I want to buy an internal module, I need to know which reference module is compatible

  Thank you

  Hey Buddy,

  Do you need an internal Bluetooth module or an external Bluetooth dongle is also an option? Latter would be less expensive and installation is easier too.

  I founded an interesting offer on Amazon for $ 12:
  [IOGear USB 2.1 Bluetooth Micro adapter GBU421 | http://www.amazon.com/IOGear-Bluetooth-Micro-Adapter-GBU421/dp/B0018O9JIG/ref=sr_1_2?ie=UTF8&s=electronics&qid=1277451921&sr = 8-2]

• Satellite A200-1If - drive external HARD after a while is "unknown device".

  Hello!

  I have such a problem: I work with my external case alu Toshiba 3.5 HDD 500 GB and after awhile of copy of the files in the laptop it disappears and appears this luckily device recognized.
  Can it be caused by not enough power in the USB port?

  THX for any help or the workaround

  Hello

  Yes, this may be caused by the fact, there is not enough power provided by the USB port. first of all, note that external USB hard drives 3.5 inches are generally designed to be used with systems of office due to their higher power needs (this is also the reason that many need an external power supply of their own). my suggestion would be to buy a 2.5 inch drive external hard USB is designed to be used with laptops. Another reason that the hard drive may disappear when copying files, is that there may be a problem with the connection of the USB cable between the laptop and the external HARD drive. I suggest to check that both ends are connected properly and not put any pressure on the cables and keep them stable.

  I hope this helps you with your question

• Satellite A660 - optical driver turns off when burning DVD

  I have a problem with the optical drive of energy saving options that disables the drive while burning.

  I tried all the suggestions mentioned here [http://forums.toshiba.com/t5/Satellite-Laptops-A-Series/Optical-drive-automatically-turns-off-due-to-power-saver/td-p/223654], but it does not help.

  I start at the burn in Ashampoo Burning Studio free, and he seems to be good until the end. When it starts the process of lead-out the popup of the optical signals Drive Power drive is turned off. It's funny because it is still running at the speed of combustion and it will not stop. The reader becomes unresponsive, even I can't the DVD out. Even, that it disappears from the list of devices.

  The only way I thought so far to stop the car and release the DVD is in the shutdown/Hibernate the computer.

  Once the dive starts working again the STRANGE Fn-tab functionality started working and I can turn it on/Off/ejection at will.

  All the burned DVD - s are not valid, and so far I have not managed to burn a single functional DVD.

  I have a Toshiba Satellite A660 - PSAW3E with Win7 Enterprise 64-bit.

  Is there a way to fix this? Remove the optical drive power management?

  Hello

  To be honest I have never heard of this issue, but it appears that the optical drive power management is part of the power of Toshiba configuration utility.
  Part of the Toshiba value added package configuration done Toshiba power utility.

  What you can try, for testing purposes, to remove the Toshiba added value of the system package, restart your computer and try to burn DVDs again to see if the same problem will occur again.

  Toshiba value added package contains several tools such as utility cards flash FN so after his withdrawal, you will not be able to use the FN keys. In any case, after that trial, you can download and install Toshiba value added package again.

  I mean, I know what kind of conflict is there, but maybe you should consider it.

• PC crashed files saved as. The files on drive external hard, cannot open or convert them.

  I have seem this asked before. I have PC crashed and before I got it, I backed up my files to an external drive HP, these files have been saved as. WIIM files, I down load ZIP 7-11 that opens these, but I can't seem to move them to records or anywhere else on the computer. I have a few music files, I need to move, etc., I created folders to move these files, but when I drag them, the records say that they are in the folder, but you don't see them... Please help

  Hello

  Do you have an error message when you try to move the folders?

  You cannot move files that has the. Extension WIM (Windows Image Format) . You should check the settings within the program Zip from 7-11 and see if it helps.

  WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information helps

• Satellite L670D Simple Drive external HARD drive question

  OS Windows 7 Home. Preload by Toshiba.

  Have a Toshiba simpledrive 1 T. When plugged into the USB hardrive are rewritten with shortcuts. Hard drive in Explorer properties shows data from correct volume on the disk, but I don't have access to the drive. Shortcuts anywhere.

  Disk formatted with laptop and work very well, but can not eject. Whenever I want to eject the disc, it is being used by another program. Cannot find the program using Xdrive. Once the X drive is off and then turn it back on shortcuts will be displayed again. Do not have the same problem with Xdrive on my PC - OS Win 7 Pro - works fine.

  I've updated to Toshiba laptop drivers, Bios etc. Also updated Windows still no go. It must be a problem with laptop, but I seem to not be able to solve it.

  Help will be appreciated.

  Hello

  Hmm, try connecting the HARD drive to the computer before booting the operating system Win.
  Also, check if the software Xdrive isn't blocked by any other security software (antivirus, firewall tool, etc.).
  I also recommend checking the power management of the Win 7 on your laptop. Check if the USP ports are not configured to save energy.

• Satellite U505-SP2017L - driver SATA to install Windows XP

  I need to install Win XP Professional and remove the top home Windows 7 because I can not connect to my domain, but hey tried with several SATA and nothing that another solution would be,

  Thank you

  Hello

  What SATA drivers have you tried exactly?
  Normally, you can download the storage on the Intel Web site manager. Check this box!

  Alternative, go into the BIOS and choose disk HARD Compatible AHCI mode. Then, you don't need an additional driver.

• Satellite A80-129: Mat * a DVD - RAM UJ-830 s cannot burn DVDs

  MODEL: SA80-129
  DVD RAM TYPE MAST * A DVD-RAM UJ-830 S
  SYSTEM: WINXP
  SOFTWARE: NERO

  (1) DVDRAM CAN READ CD AND DVD EASILY, IT Burns CD WELL, BUT cannot burn DVDs, IT SHOWS: G:\ IS NOT ACCESSIBLE INCORRECT FUNCTION, UNTIL IT WORKS WELL. the blank dvd is not a problem, before I used even type a blank dvd to burn.
  (2) even allow the recoding in the properties, the properties shows the Virgin dvd 0bytes.

  all PROMTLY ANSWER would BE MUCH APPRECIATED.

  It doesn't sound good.
  I had a similar problem of combustion and the end of the story, I replaced the drive ;(
  However, try to remove the drive from Device Manager, and then again to restart the operating system should recognize the device again.
  Then you could check if it able to burn the DVD s s.
  I think you should also try burning different DVD media.

  I have visited many work sites and the reader, and especially the calibration lens malfunction could be responsible for burning problems.
  This could be a worst case and in this case, the replacement is necessary.

• Cannot burn DVDs on my Satellite C660

  I just bought a new complete Satellite C660 and I cannot burn DVDs.

  Tried to burn with the recovery media creator, Nero, IMGBurn and all fails at around 75%.
  When I tried to burn the recovery CD as I was asked that they have failed because of a problem STARTING...

  You can create DVDs from recovery use preinstalled Toshiba recovery media creator. Please test using DVD-R media.

  Have you tried using different media of high quality as TDK or Verbatim?

  Sorry, but this startup message said nothing to me. I've never seen something like this, even if I created several on several laptops Toshiba recovery disks.

• Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://support.Microsoft.com/kb/943104

  It will be useful.

• Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

  I just burn a CD with no problem at all.  Using the same type of CD, brand new, I tried to burn another CD and got this error message:

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

  I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message.  No idea why my CD-writer has decided to stop working for me?

  Hi Cierrajade,

  1. you have any third-party DVD burning software installed on the computer?

  Method 1

  You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

  For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  Method 2

  If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Method 3

  If the previous step fails, check if you can burn CDs using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Buning CD error: "Windows Media Player cannot burn the files. ... Install the latest device driver"

  original title: when I try to burn a cd, I get the following message

  When I try to burn a cd, I get the following message: "Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. "I just burn a cd of two days using a blank of the same pack then, what's the problem?  I installed itunes.  Could be the problem?

  Hi AnnaMiller,

  You can try reducing the burn speed to see if that solves the problem.

  1 open Windows Media Player

  2. click on the burn tab

  3. click on the burn icon options (windows with the box on the right)

  4. Select burn more options...

  5. click on the burn tab

  6. in the general section, change the burn speed.

  7. click on apply

  8. click on OK

  
  

  If this does not resolve the problem, make sure you have the latest drivers for your DVD drive. You can locate the drivers on the Technical Support Web site of the manufacturer of your computer.

  1. download the driver from the manufacturer's website and save it to your desktop so that it is easy to locate.

  2. click on Start

  3. right click on computer

  4. Select Manage

  5. Select Device Manager

  6. develop CD-ROM/DVD-ROM readers

  7. right click on your device

  8. Select Properties

  9. Select the driver tab

  10. click on set to update driver

  11. Select Browse my computer for driver software

  12. click on Browse > Desktop > and then select the file that you saved

  13. click OK

  14. click Next

  
  

  You can also run the Media Player troubleshooting utility to reset the media player to its default settings.

  1. click on Start

  2. click on Control Panel

  3. Select Troubleshooting

  4. Select programs

  5. Select the Windows Media Player settings

  6. click Next

  7. Select apply this hotfix

  8. follow the remaining instructions.

• Cannot pair phone NOKIA N78 / Satellite U505 Service detection failed

  After you run the wizard of BT, it detects the phone, but when the pairing is requested a * _ {color: #ff0000} error "failure of detection of Service {color} _ *" is always displayed.

  Pair phone to other devices such as headphones and a laptop ACER Vista successfully.

  Toshiba satellite environment is as follows:

  Satellite U505, installed the software factory, running 64-bit Windows 7 Home Premium, battery BT reports itself as version 7.00

  Ideas, sought after and some forums suggest to raise the security level, unsuccessfully, that and all the stuff in my bag (she holds a certain number).

  So my Iphone wife´s is all also detected but unable to pair as well. Suggestions please

  :-(

  Strange. I have European Satellite U500 and I can connect my LG phone successfully.

  Phone is detected automatically and the phone asked me to confirm the PIN. The PIN was shown on the screen of the computer laptop too. These two numbers are the same. I confirmed the PIN on the phone and the devices are automatically connected.
  After it, I've transferred all saved photos from the phone to the Satellite U500.

  I put t really understand what you're doing wrong. Open the help file for battery Toshiba BT if it pleases you and check if you can find help there.

• Satellite A300 - cannot burn DVDs dual layer

  Hi, I bought my laptop 10 months ago.

  Since then I ve been burning a disc or two every now and then, no intense use of the driver.

  Last week I tried to burn a DVD double layer, my driver seems not to be able to burn a. I used BurnXP free burning software that supports double layer and when he finished the first layer of the program collapsed in response, I have tried 2-3 disk, none worked.
  Then I tried the latest version of Nero, everything seemed smooth (it burned down two layers) up until the finished burning process and then I got an error message that the procedure has failed.

  I have tried different brands of disc 'TDK' 'Philips' "In extenso" or something. None worked.
  I tried a Philips disc on my desktop drive and it it burned very well.
  -Should I head to Toshiba service?
  -Are there a driver/firmware to fix my problem?

  PS: I tried to update firmware but can't find a firmware for my drive.
  I have the ' matsita DVD-RAM uj-850 s and I used the right type of DVD discs--
  Type in advance.

  > So I tried the latest version of Nero, everything seemed smooth (it burned down two layers) up until the finished burning process and then I got an error message that the procedure has failed.
  You have received this message, but have you checked the DVD DL after that?
  Perhaps the data has been burned correctly?

  I got a lot of time, the message that the burning procedure was not successful, but I then tested the disc and it was legible.

  AFAIK that should the user manual contains also some info on drive tested and compatible.
  Maybe you should use the DVD DL recommended in this user's manual.

  But of course this could be also a material IRREGULAR deadlines.
  In this case, you must request the ASP for the test and check!

• cannot disconnect usb hard drive external, impossible to use "remove" to eject from my hard drive

  I have windows 7 using a new drive external hard usb. I am unable to use "remove" to eject my hard druve it says windows can not stop your device generic volume beak a program always uses this even tho I did open or running. If I pull the unit I have at high risk to mess up the data on the external hard drive.

  WolfgangSlany,

  I suggest you run the Hotflix from the link and if it helps.

  http://support.Microsoft.com/kb/931619/en-us