Satellite A30: Lasts 30 minutes just to load XP

I just installed xp pro sp1 on my a30 but not from toshiba drives, as soon as it was installed it takes 30 minutes just to load xp before signing

I put the new bios update V1.80 but still no joy and changed the start of devices but still no joy

PLEASE HELP SOMEONE

Hello

It's not easy to say why it happens. Maybe a virus, treated them melts strange procedure or there is something wrong with the hardware.
Usually after installation from the recovery CD the OS and the unit should work properly. Try it.
However if you install the original Windows if you install Toshiba stuff in the right order. Please see the page of the Toshiba driver for installation instructions.

Tags: Toshiba

Similar Questions

  • Satellite A30: After 30 minutes standby lights

    Hello
    I have problem with my Satellite A30, I often play games online and my computer should stay on when I am not home... The problem is that the BIOS allows the computer to be on 30 minutes after the last mouse or the last key on the keyboard. Please help I can't quit working just because a game off.

    Needing help

    Hello

    The Toshiba power saver must be preinstalled on the device.
    This utility controls sleep mode.
    Please open the Toshiba power saver and choose profile of power mode is used if the AC adapter is plugged. (full power)?
    Then, go to details. In the properties of full power, you will find the tab called "power saving mode".
    Here, you must change the standby system controller forever.

  • Question about Satellite A30-power adapter

    Hello

    I own a laptop Satellite A30 and my charger just died. I have looked on the internet to buy a new one, but can not find the same model of the same brand (delta ADP-90FB REV electronics. (E) and having trouble finding something on the site Web of Toshiba.
    I found some Chargers compatible with laptops Satellite A30 on another site, but they are quite expensive (about £55). Another less expensive option?

    Thank you

    Thomas

    Hello

    Believe me: it s better to use than stuff unnamed original equipment. On the one hand, you win money and if your machine is broken due to a power adapter that gives your machine
    a wrong voltage or whatever.

    I had a great experience with my tecra 8100 a few years ago:

    My old AC was broken, so I bought one in a store, which has been declared as "corresponds to 100% and blablabla".

    Cost: $ 37

    After a while my machine freezes sometimes and for a day-> no boot.
    Then I gave my machine to fix after they have made their diagnosis, they asked, what sort of AC, I used. Heh? They explained to me, I used the AC adapter was not a constant voltage,
    If some capacitors smd-says 'goodbye '.

    You can save money, but give you him another side, believe me.

    Welcome them

  • No sound on Satellite A30 921

    Hi M8

    I have PC Toshiba laptop Satellite A30 921.
    I just installed Windows XP Professional and all microsoft updates.
    I downloaded the latest Sound driver and update the bios of Toshiba Web site for this laptop.

    I updated the bios and installed its Audio driver for "Realtek AC97". I'm speaker icon on my taskbar.

    But for some reason, I don't get sound from the speaker or headphones, when I start up windows or CD of music game or file.

    I check the volume and the installation program. I lost completely.

    Please could you help me solve this problem.

    Much thanks

    I have to ask you something.
    Have you got the sound before you reinstall the operating system?

    What about the State of the sound card in Device Manager? Are there any yellow exclamation marks?

    You say you checked the volume and the installation program. Did you also check the volume control on the side of the laptop?

  • Satellite A30: Error number (11122) cannot load the bitmap with recovery CD

    I have a Toshiba A30 I want to reformat with the recovery disk. I get that day then I get an error that reads:

    The error number (11122) cannot load the bitmap file. Height max = 100

    The hard drive has now been deleted and I can't sent this message to reformat.

    Can someone help me on this please.

    Hello

    Satellite A30 is quite old and I wonder what report you something like this after so long. I put t know exactly what is happening, but it will be interesting to know a few things:

    Have you noticed a similar problem before?
    Are you using the original disk or some copy?
    Is there a problem with the HARD drive?

    Please do a little bit more about these things.

  • Satellite A30 921 stops after 10 minutes

    I am the owner of a Satellite A30 921, but it stops after 10 minutes.
    I tried to change the settings for toshiba power management, but they will not work any ideas?

    The laptop turns off automatically without display of error messages?
    This can be caused by an overheating problem!

    How old is your laptop and you clean the cooling fans in the past?
    If this isn't the case, I recommend you this doing.

    To clean the fans, you can use the jet of compressed air that can be bought in most computer stores.
    The problem is that dust and debris inside of the laptop prevents cooling modules works properly, and so the temperature increases to a higher level. This leads to the farm automatically from the bottom.

    In my opinion, fans of cleaning might help with this problem.
    Good bye

  • Satellite A30-213 - stops after loading Internet pages

    My satellite A30 213 stops almost everytime, when I enter a website with a lot of uploadings. The machine rotates in about a minute or two and closed its doors. I know that my RAM is only 256 KB. Is that why and in this case, what can I do about it?

    Best regards
    Janne

    Hello

    It is not easy to give a correct answer, but the fact is that 256 MB of RAM for using Windows XP Home edition is really not much. I do not know what A30 you have exactly, but some of them can be upgraded up to 2 GB of RAM.

    RAM modules are not more expensive and I recommend you to upgrade to 1 GB minimum. After this the laptop will have a lot more resources and will go much faster.

  • Satellite A30 - 203 - didn't turn, just flashing lights

    My Satellite A30-203 does not illuminate. When I press the power button / nothing happens, but if I remove the power then when I press the power button all the lights other thanthe lights HD lights up and the power lights going outs and less than half a second after the rest of the lights will turn off.

    Is this what can I do with it?

    Hey,.

    In my opinion, there is nothing that you can do it sounds like a bad material work because Windows installation doesn t affect the startup procedure until Windows starts so you have a hardware problem.

    What you can try is the following:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=21

    If it doesn t work you need professional help from technicians of laptop I think
    ?

  • Satellite A30: Error BSOD during Vista installation

    Hello
    I tried to install Windows Vista on my Toshiba laptop (Satellite A30).
    After booting from the CD to install, in 1 minute, I get the following blue screen error message.

    "The BIOS in this system is not fully ACPI-compatible. Please concat your
    system for an updated BIOS to update vendor. Technical information: * STOP: 0x000000A5
    (0 x 0, 00000011 00000007, 0xFFD0D010, 0x0100000E) »

    I searched in Google and Microsoft Sites on this problem and I found that the problem of ACPI and it may be one of this thing:
    --------------------------
    (0 x 000000011, parameter 2, parameter3, parameter4):

    The system cannot enter ACPI mode. There are several reasons for this, including:
    The system cannot initialize the AML interpreter.
    The system does not find the descriptive table of the root system.
    The system cannot allocate a critical driver.
    The system cannot load the descriptive table of the root system.
    The system cannot load device descriptor blocks.
    The system cannot connect to an interrupt vector.
    The SCI_EN (System control interrupt enable request) cannot be set (see 0x00000001).
    The of ACPI Table checksum is incorrect.
    ACPI is a hierarchical organization of tables, each relying on the other to define the full functionality of the system and each device in the system. ACPI starts by looking for the Description of the root system table, which points to the next table, which points to the next table, and so on. Usually, the error 0 x 000000011 occurs because as these tables is damaged or missing.
    -----------------------

    The BIOS has date of May 2004.
    BIOS type: Phoenix
    BIOS date: July 22, 2004
    BIOS ID: Phoenix NoteBIOS 4.0 release 6.0
    BIOS OEM: V1.80
    Chipset: Rev. Intel 3580 2

    It's the last BIOS availabel to the Toshiba support site.

    Is there a way to update ACPI in the bios or disable this error?

    Any help would be appreciated to greately.

    Thank you
    Algurashi

    Hello

    are you sure that you have installed the good bios from this machine? It could be, this bad bios downloaded you´ve, then the system does not work because of a bad bios.

    Just do the following: display the model number of your machine and I will guide you towards the good bios version, maybe we can solve your problem.

    See you soon

  • Re: Fan is constantly running on Satellite A30

    Whenever I start my Satellite A30 the fan starts to operate in an audible manner. However, HD is about 32 to 35 ° C, according to speedfan. In addition, from time to time, the fan speeds up and gets really loud.

    In addition, sometimes the laptop just closed without any warning. I shall now put the end of the book a one bar so that air can still pass by the pc, and I feel it helps.

    I would like to stop the fan always running and to reduce its noise.

    My RAM expansion may be the reason?

    To make the A30 run better and be able to install WinXP SP3 I upgraded from 256 MB to 2.0 GB of RAM which is the maximum size of RAM according to the manual. I used the site Web of Kingston to select and buy the CPU, so I guess I bought good extensions.

    If the extension of RAM were the reason for the fan always market that would mean that if the A30 Gets the full load of RAM it's overheating. Right?

    Are there people here on the forum who had the same problem with a noisy laptop after upgrading the RAM?

    TIA
    FT

    Satellite A30 is old enough for laptop and, in my view, there may be a big problem cold air and cooling rack is full of dust. Laptop cannot be properly cooled. I opened several old notebooks and it was amazing to see how the dust was inside. I really wonder how the laptop worked

    Laptop last I opened was friends Satellite A100 (not so old as yours) and I've been irritated how fan worked on this laptop. He was so strong and ON / OFF sporadically. After cleaning it computer laptop was extremely calm and fan has worked almost constantly, but at the low level silent.

    The same was on my old satellite 1900. It was full of dust.

    Upgrade RAM or any other reason can be the reason for more power and performance. Performance notebook more runs faster and produce more heat. The critical threshold is reached laptop after suddenly OFF.

  • Satellite A30 shuts down / blocks

    Hello
    I have a Toshiba Satellite A30 for about 2 years with no problems. Until today...

    I was chatting on MSN Messenger, but had to put my missing status and left the computer for about an hour.

    When I came back to it, the screen was all what it was when I left, but there was no control of the mouse, no whirring HARD drive away, not nothing. In fact, it seemed that he had closed the partitally without turning off the screen.

    The only way I could reboot had to turn off the power. I disconnected the battery, reconnected everything and tried to reload. I don't even have as much as Logo of Toshiba screen, click on the HARD drive, * which is normal for this machine * and off.

    I thought that maybe it was an overheating issue, then I left for half an hour and go home. This time it restarts, but the display was all out of sync. was on 800 x 600 when its usually on the following resolution. (Don't remember who he is). I ran dxdiag and he told me that there is no present display driver, as I had reloaded using the last well known record. It was not a problem, I reinstalled drivers, restarted without any problem.

    Everything was fine for 2 h with the laptop, so at this point, I don't think it was a heat issue. I went through the net, when hung just computer still once, I lost all control of the mouse, even if the optical lights on it were always activate when moved, and he seemed to stop again.

    Well, I left for 10 minutes, he came back and tried again, it started ok, but as soon as I tried to access anything, he hung up again, forcing me to press the power button to shut down.

    Sorry for the lengthy post, but can anyone shed light on this point, I use my laptop on a daily basis, and there are things about it, as I need to access.

    I hope someone can help

    Thank you

    Fruitini

    Hello

    It is very interesting because it can happen to anyone. I really put t know which can block the laptop. On this way, we can only speculate and it is really not easy to say why this happens to concrete.

    I put t know how is your unit configured and that these (process) applications run in the background, but you can try to stop all the unnecessary stuff and see what is happening in this case. Check the Device Manager and make sure that everything is properly recognized. After that create a system restore point and in this way you can restore the system to an earlier time if something goes wrong.

    If you do not find what happens I recommend you back up the data and do the recovery procedure. On this way the unit will be own pre-installed and things like this can happen. As you know sometimes happen oddities and there is no logical explanation.

    Good luck!

  • Satellite A30-514: problem of USB after you installed Windows XP SP2!

    I have a satellite A30-514. I clead the HARD drive, reinstall the software from the recovery CD I got with the PC.
    After that, I launched Windows updates and installed SP2.

    But now my USB only recognizes the mouse and nothing else, when I try to connect a device told me that there was an error on the data and the installation cannot last. I tried reinstalling the driver from chipset from the CD, but nothing happened.

    Hello
    Service Pack 2 does not have hardware redetection of embedded devices. I have the same problem on my S5200 and I just refresh the Device Manager, and after that, it was all right. So, try this one.

  • With Satellite A30 power problems

    Hello

    Over the last four years, I have been using a Satellite A30 with XP Pro... had no problems whats so ever until that last months... I started to notice the battery life becomes lower before (prob because of the decrease in battery life) but also when he is on the grid it will charge the battery to 100% but instead of power are removed from the sector It starts to drain the battery even when the sector is connected.

    Another problem is that I have to keep or stop the laptop goes into hibernation mode so it can recognize it is powered from the battery to load... even in this case, it may take several attempts for the laptop to begin to charge the battery...

    These problems started start after warranty, and was released in additional insurance coverage

    Any information or help gladly appreciate it that I fight to get assignments done University

    Thank you

    Ben

    Hi mate,

    had a similar problem with an other friend A30. After sending the machine to an ASP (certified partner), they told us that the internal charger was defective and they have offered to swap the motherboard.
    But given that the motherboard was really expensive for him he sold the machine on Ebay and bought and Satellite A200 which is a machine really well.

    I guess that the motherboard is gone...

    That's all

    See you soon

  • Satellite A30 won't boot to the top

    My computer does not start at the top. Yesterday, I had the blue screen but then restarted and everything was OK. Woke up this morning to the computer does not start. I have a Toshiba Satellite A30. I got the Toshiba screen, then the black screen to choose 'Start normally', 'last good settings', 'safe mode', "safe mode with network" etc.

    I chose normal startup, then I get the Windows XP screen with the blue bar. When that has been loaded, he went back to the initial screen for Toshiba and then continues to repeat. I also tried safe mode, but that charge or the other.

    What should I do? I don't want to erase the hard drive because there a lot of important data (family photos, work) etc. Please help me

    Thank you!

    You can remove the HARD 2.5 laptop drive and you can connect it via USB to another PC. Then you may be able to save any important files.
    After this procedure the plug back in the HARD drive and boot from the recovery CD to reinstall the OS.

  • Updated the BIOS on Satellite A30

    Hello

    I'm about to update the BIOS on my computer Toshiba Satellite A30 laptop (Service Pack 3).
    I downloaded the BIOS updated and decided to update the BIOS from Windows such as recommended on the Toshiba site.

    On the site he mentions before the BIOS upgrade, please ensure the following:

    Laptop BIOS update:

    Before upgrading the BIOS level, please do the following:
    -Portable is in stand-alone mode.
    -Laptop is plugged into the mains.
    -Laptop computer must be in boot mode and not recovery mode.
    -Remove all PC cards.

    1 Windows based BIOS update:
    1 extract the zip file containing the BIOS upgrade to a temporary folder.
    2. ensure that all open files are saved and all applications are closed.
    3 run the *.exe extracted to the temporary folder. Follow the instructions on the screen.
    4. the BIOS update will be done automatically.
    5. after a few minutes, the computer will restart automatically.

    I'm not sure of what he means by laptop computer must be in boot mode and not recovery mode

    What is the startup mode and how to fix my laptop in this mode?
    Can't I just run the file downloaded from my office?

    Thank you;

    As mentioned by Garrett; You must download the package from the BIOS, then unzip it and then you can run the exe file.
    Usually it s no matter where the package was decompressed!

Maybe you are looking for