Satellite A300-146 - CD/DVD read and write the question
I have Toshiba Satellite A300-146, model No.: PSAJ0E, 1 GB of RAM, Intel Dual core 1.87 processor, chipset Mobile Intel (r) 965 family
I use the windows7 RC version.
My DVD burner does not work correctly.
(* 1) not read 700 mb CD and don't read do not more DVDs.*
A few months ago he read sony DVD, read all CD and dint read some local DVD. Now, it is not read sony DVD and and all the CD that I used. But reads the local DVD...
(* 2) a few times it can write DVD but most of the time this is not not writing DVD Nero 7 display of 100%, but the DVD is not written anything.*
I use Vista drivers for my Window 7 operating system...
3. should I install windows 7 drivers... ?
4. are there specific drivers for DVD player. ?
Experts or those who have recovered from the same problem. Please help me.
Thanks in advance.
Hello
Maybe your CD/DVD drive becomes faulty... What do you think?
But before you think to a new disk, you must remove the server - and lowerfilters in the registry. You can follow the workaround from Microsoft:
http://support.Microsoft.com/kb/314060
Also, make sure that the CD/DVD drive lens is clean. You can use a microfibre cloth to clean. This rag doesn't scratch the lens.
Check this box!
Finally and above all, there is no special driver for CD/DVD drive. It s a part of t Windows and can be updated.
Tags: Toshiba
Similar Questions
-
Satellite L670-112 - SSD slow read and write speed
Hello.
I put 120 GB SATA III SSD kingston (read and write above 500 MB/S), but when I run the sequential test I get 150 MB/S read and 107 MB/S in writing. I know SATA II limitation, so should not write and read nearly 300 MB/S?Yes, it should at least reach SATA II speeds (close to 270 MB/s).
Most SSD's 4K sector drives you may need to realign the 512 to 4K sectors using a partition alignment tool (I think that WD have one available).
-
Read and write the empty file - InputStream
Hi all
I have a problem with the playback of a file.
This is my code:
I create my file and put my datas:
try { String filePath = "file:///store/home/user/locations.txt"; FileConnection filecon =(FileConnection)Connector.open(filePath,Connector. READ_WRITE); // Always check whether the file or directory exists. // Create the file if it doesn't exist. if(!filecon.exists()) { filecon.create(); } OutputStream out = filecon.openOutputStream(); out.write(data.getBytes()); filecon.close(); } catch(IOException ioe) { Dialog.alert(ioe + ""); }
Then I want to read my data but my inputStream is empty and I don't understand why...
String filePath = "file:///store/home/user/locations.txt"; FileConnection filecon = (FileConnection)Connector.open(filePath,Connector. READ_WRITE); // Always check whether the file or directory exists. // Create the file if it doesn't exist. if(!filecon.exists()) { filecon.create(); } InputStream in = filecon.openInputStream(); InputStreamReader reader = new InputStreamReader(in); StringBuffer sb = new StringBuffer(); final char[] buf = new char[1024]; int len; while ((len = reader.read(buf)) > 0) { sb.append(buf, 0, len); } data = sb.toString();
Thanks for your help...
Welcome to the forum.
Can't see anything obviously wrong.
I suggest for now you change to use the SD card instead of the store and run in the Simulator with the SD card simulated as a directory. You can browse the Windows directory and if, in fact, the file is created as expected.
-
Brander DVW/RW can read and write DVD double layer dvd
Hello
I would like to know if brander DVD/RW can also read and write the DVD DL(dual layer) dvd.
or I have to buy for that special brander!
Johan
What is a "brander DVD/RW? Support double layer DVD depends on the material. Try to identify the make and model of the car since the Device Manager and find its specifications.
-
read and write performance vm information top 10
Hello
I wonder if it is possible to have some information about reading and write the totals of the IOPS / s and latency? The only one i have now in Explorer 'storage '. "VM performance top 10" is average information and tip of the Ops / s and latencies. I need information of reading and writing of the virtual machines instead of the totals.
Thanks in advance.
GER.
EDIT: I noticed that the discussion is started in the wrong forum. I use VoP server explore FREE
Hello
Unfortunately, the free tool there is no distinction between read and write IOPS / s or latency. They are grouped in a single total.
-Brad
-
Read and write data to the content repository.
Hi all
We use the content repository to store a document and images on the web server in the Center.
So we have created/setup a repository of content on the web center.
Please proivde me some might document page to get an idea of how I can read and write the date
content repository.
You are most welocme to provide some idea /suggestion.
Thank you
Arun.You are using webcenter spaces or you create a custom application webcenter?
When you create a custom application webcenter, you can make use of the workflow Documents. Jdeveloper resources catalog, you will find a few flows of Documents job that will allow you to add some components to manage documents in a folder structure.
You must first create a connection to your content from your application server. This can be done in the Application resources, right-click on the connection and in the context menu, select "content repository". Them you must filll in connection to your content server details. Make sure you have selected "Set as primary connection for document service" because otherwise the document taskflows you deposit on your page will not find a connection.Once you have added the connection, you will also find a datacontrol to the content repository. In this way, you can use the datacontrol place the taskflow and you can create several custom tables.
I'm not sure but I think the datacontrol also include surgery to create the document but I'm not sure...And if not enough, you can always do use the webservices provided by content server. In Jdeveloper you can easily create a datacontrol from Web services by providing the wsdl file. UCM provides for services so that you can import the wsdl into your application and you can easily create your own forms checkin, tables...
Here is some information on how to integrate services document:
http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e10148/jpsdg_doc_lib.htmand here are some others:
http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e10148/jpsdg_content.htm#BABCCFJH
http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e10149/documents.htm#WCSUG2635
http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e12405/wcadm_documents.htm#WCADM205Published by: Yannick Ongena on Oct 8, 2010 08:23
-
Satellite M30X-165: Mat * a UJ - 831 S is not read and write any DVD
Hello
the next problem is sticky on the laptop Satellite M30X 165 with the burner Mat * a UJ - 831 S: it can read and write CDs, but is not able to write them to DVD or even read some of the ones I've burned and also read in the same drive. Even at the start of the DVD, it does not start from the recovery DVD, the player starts and slows down very quickly.
Without doubt, it must be put at the service of repair or someone has other suggestions?Could you please tell me how long the repair takes (I know what it takes to install the desktop temporarily used).
Thank you
Post edited by: DerSeher
Using burning software, it detects the DVD, but invite you to an "error of calibration power (037303).Hello
If you cannot use recovery media, I guess that the drive is defective and must be replaced.
-
Satellite M100 - can only read and write CDs.
Hello
I use a Satellite M100 Version PSMA0L-18203E on windows xp sp3. My DVD writer model is HL-DT-ST DVDRAM GMA-4082N.The problem is an am able to read and write Cd but when I insert a blank dvd, it displays "Please insert a disk in the drive" so that I am able to use Recovery DVD ROM from Toshiba with no problems. Please help me.
Hello
As wrote Al - Ex what program you use to burn discs? I have good experience with Nero and CD Burner XP. Can you test with one of them, please?
In addition, you must also use high quality media. I have good experience with the types of DVD-R Verbatim and TDK.
What DVD's that you have? -
Satellite A300-1ME does not read that DVD only reads CD - R
HY,
My Satellite A300 - 1st Don t read CD - R and CD - RW worse or unburned, it only read´s DVD´s.
Please can you give me a helping hand for this problem.Thank you
Hello
First of all, you should check if are some registry issues.
Go to the register a remove the Upperfilters and Lowerfilters completely from the following registry key values:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
Then restart the device and check if you could read the CD.
I had a lot of problems with different discs (CDs and DVDs) as well
I could solve the problem. the problem is that my CD/DVD drive is not compatible with some CD and DVD from different manufacturersFinally, I bought some TDK CD - R and my CD/DVD player has been able to manage these disks
I think you should check the different discs from different manufacturers too!Last but not least check if there is an update of the firmware of CD/DVD for you, CD/DVD player.
To do this, you should visit checking page European driver Toshiba details more details.
You will find the info if the firmware has been published for you CD/DVD drive.Welcome them
-
My DVD/CD RW drive will not respond to CDs of any type, void, audio or data. It whirs for a few seconds and then more nothing. No AutoPlay (even if she is selected and in the registry as a value of 1), and if I try to click on the drive, the old hourglass stand forever and if I click on new does not, unless I have the disc, it erases then back to normal.
The drive works fine for DVD reading and writing. I tried to little nearly every thread relating to problems of CD, and I ran out of hair out! I uninstalled it, unplugged, repluged, rebooted, reinstalled, you name it! PC has updated the driver when I try to update. I did all the advice regedit I saw and still nothing! Anyone? Please?
Hello
You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.A CD/DVD cleaner might help.
CD have a tolerance + - and your can read/write on the edge outside these discs
tolerances. They may be delivered, but it is generally more economical to replace the disk.Several good info here:
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014===========================================
This troubleshooting could not help if there is alignment and/or wear issues however it
a shot.Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
How to install Windows XP on Satellite A300-146?
Hi all
I need to know how can I install Windows XP on to my Toshiba Satellite A300-146 since I have windows vista with Arabic and this very bad.
I heard in the laptop we have a SATA hard drive and the problems of British Colombia, who has not read the material.Also, I want to know how I can change vista from Arabic to English interface?
How can configure LAN?
Just a question;
Did you go through this forum and simple threads on this topic before you posted this new topic?There is a lot of discussion on the installation of Win XP on laptops with SATA controller!
The procedure is always the same on most portable models!You have 2 options; fade you assign compatible in the BIOS SATA mode and would not need to install the SATA drivers or you let the SATA AHCI mode and would include the SATA drivers using an external floppy drive you would have built a new disk Win XP using nLite software.
PS: SATA drivers are part of the Intel Storage Manager!
-
Satellite A300-146 - cannot play games with graphics
I have Toshiba Satellite A300-146, model No.: PSAJ0E, 1 GB of RAM, Intel Dual core 1.87 processor, chipset Mobile Intel (r) 965 family.
I can play some games like hitman silent of assasin on fullscreen and with graphics.
But the problem is that a game could not open correctly IE after you open the game, he becomes 16-bit or not graphicsless. I tried these games = need for speed - pursuit and need for speed - undercover, the same problem occurs. I tried in windows XP and Vista.
We all know Roadrash. I played this game in computer III pentium no value correctly... but I can not play in my laptop...
Please help me to recover from this problem with the graphics.
Sul
Hello!
Check the system requirements for the game. Satellite A300 is not a high-end gaming laptop and maybe some new games couldn't work on this laptop.
Maybe you need to reinstall your laptop with the Toshiba recovery disc. I put t have another idea so try and post your result.
Good bye
-
Re: Satellite A300-15 b Model_No: PSAJ4E and windows XP
Hi guys,.
I bought Toshiba Satellite A300-15 b model_No: PSAJ4E and I am trying to install windows XP. but when the installation message comes out says no hard drive found. I know that this question that I have to use the disk driver hard for allows me to do this.
My Question is, I need hard disk drivers to support SATA in windows xp?
Note: I have read in this forum that I can do it in the BIOS Setup, but I don't need this response.
Thank you very much in advance...
Hello
Do the same thing as Niko for his Satellite Pro.
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=35787
I think that the chipset for laptops is the same - Intel® PM965 + Intel® ICH8M. You need load the files in the folder Ich8M_32 bits.Good luck!
-
Satellite A300-146 - Original (vista) recovery is necessary
Dear brothers,
I lost the original recovery for my labtop Toshiba Satellite A300-146 (formatted) and now windows doesn't work.
I need the recovery CD if anyone with, please.
Hello!
If you have lost the recovery disk you can directly order a new to Toshiba:
https://backupmedia.Toshiba.EU/landing.aspxGood bye
-
In Satellite A300-1MX SDHC card reader?
Hello world
I bought a Toshiba Satellite A300-1MX in October 2008 and now I wanted to buy a SDHC card, but I was wondering if my laptop would support this 'new' - ish card. The reason why I want a SDHC is because it comes in large volumes.
If you know if my laptop can read SDHC cards?
Thank you very much
Sincerely,
Alex
The Satellite Satellite A300-1MX card reader supports these cards:
SD card: 8MB - 2 GB
SDHC card: 4GB - 16 GB
XD picture card: 16 MB to 2 GB
Memory stick: 8MB - 256 MB
Memory Stick Pro: 256 MB to 4 GB
MultiMediaCard: 8MB - 2 GB
miniSD (with adapter): 32 MB - 2 GB
microSD (with adapter): 512 MB - 4 GB
Memory Stick Pro Duo (with adapter): 256 MB to 4 GB
As you can see that the SDHC is supported
Maybe you are looking for
-
I am trying to add a gmail account to Thunderbird that already hosts several gmail accounts. No matter what I do, I can't recognize the password in Thunderbird. I admit, I was wrong a few times, but I got the right one, and it was typed in perfectly
-
Hi, this is Lee. I had the very serious problem. I'm currently building the real-time data recorder. But I found that there is a leak memory while I wrote the TDMS files. Let me explain further. Please watch for my project, I downloaded. There are ta
-
I bought my laptop in july.it was working perfectly until I decided to upgrade to windows 8 a few weeks back. and I have problems since. Once I've upgraded to windows 8, I started getting some beeps at startup, in no particular model or the number of
-
Active Directory - join the domain for multiple devices
Hi all I need your expertise to advice me how join domain for multiple devices. Currently my organization have more than 10,000 computers are made up of Windows XP, 7, 8 and 10. We will deploy new Active Directory server in the data center. Currently
-
How can I fix "windows exception int divide by zero.
I uninstalled the game, then bought - same problem. This bx keeps coming back