Satellite M100 - can only read and write CDs.

Similar Questions

• "google chrome can not read and write in its data directory '... WHY?

  I used free Windows cleaning tool; theres now load problems. When I reboot works very little?

  [Moved from comments]

  Where did you get this "tool"?

  You have not provided enough information.

  HOW TO ASK A QUESTION:
  http://support.Microsoft.com/kb/555375

• Satellite M30X-165: Mat * a UJ - 831 S is not read and write any DVD

  Hello

  the next problem is sticky on the laptop Satellite M30X 165 with the burner Mat * a UJ - 831 S: it can read and write CDs, but is not able to write them to DVD or even read some of the ones I've burned and also read in the same drive. Even at the start of the DVD, it does not start from the recovery DVD, the player starts and slows down very quickly.
  Without doubt, it must be put at the service of repair or someone has other suggestions?

  Could you please tell me how long the repair takes (I know what it takes to install the desktop temporarily used).

  Thank you

  Post edited by: DerSeher
  Using burning software, it detects the DVD, but invite you to an "error of calibration power (037303).

  Hello

  If you cannot use recovery media, I guess that the drive is defective and must be replaced.

• Cannot read and write CD/DVD on Satellite Pro L40 - 17F

  I have problems with my laptop (model: Satellite Pro L40 - 17F Cel - M 540 1.83/1GB/120GB 15.4).
  I have problems with the dvd player. When I got the laptop I managed to install a few things but now - on a two weeks later, I can't read or write CDs or DVDs.

  I checked many solutions to fix but does not work. I uninstalled the driver and restarted my computer and it reinstalled the same as that which does not once again.

  Please help me!

  Hi mate,

  may I ask what fire you´ve applications installed on your machine? I ask for the following reason:

  Several installed burning applications may interfere each other, so could not stop the drive works properly.
  Please, try the following:
  Find somewhere a linux cd or something that you can start from, and then try to start and when the disc turns and starts him CD then you know that your problem is not hardware partners, it s more a problem located somewhere in your Windows operating system.

  If the player wouldn even turn or start the inserted media then you know that the reader has some hardware malfunction and must be replaced.
  I guess you still have a warranty on your machine, if yes, then contact the nearest authorized service provider in your country and tell them your problem.
  They are able to help you and solve this problem.

  Welcome them

• Brander DVW/RW can read and write DVD double layer dvd

  Hello

  I would like to know if brander DVD/RW can also read and write the DVD DL(dual layer) dvd.

  or I have to buy for that special brander!

  Johan

  What is a "brander DVD/RW?   Support double layer DVD depends on the material.   Try to identify the make and model of the car since the Device Manager and find its specifications.

• Read and write of series Basic can't read a second time

  Hi, I'm developing my own VI to write and read an iRobot Create.  I based my vi off the coast of the basic series example write and Read.vi I found (on LabView 8.0).  When I run my vi I am able to read information from the beginning to create, but I am unable to read a second time (after a write command).  The second reading should be the same as the first (I checked with the help of another program that is linked to the creation).  I am new to using LabVIEW and I was wondering if there is a common mistake made by trying to implement a series of read and write.

  Thank you.

  First of all, to debug your orders with a program such as Hyperterminal. If it works there, then it should work in LabVIEW. You may need to send a carriage return and newline (\r\n). Your code is not currently set up to do.

  Only do something when a button is basic programming LabVIEW. You can use a simple while loop with a façade that Boolean connected to an instruction box. If you have anything other than the basic version of LabVIEW, you should use the structure of the event. Look at the examples that come with LabVIEW.

• Using the same interface CAN read and write

  Hello.

  Can I use the same CAN interface to read and write?

  For example:

  I send you CAN frame using CAN1 to my MCU.

  IF MCU confirmed the order of receiver it immediately sends the echo return command and there different ID to send the command.

  I tried to use CAN1 output framework and then reconfigures CAN1 to frame in queue and retrieve the frame of the echo.

  But it seems that I was always missing. The 'framework of CAN' kept vi expire.

  When I used the separator on the outlet BOX in my configured MCU CAN1 for frame and CAN2 for chassis in and I managed to catch the echo framework.

  I think about 100 ms for the frame in response that will be sent after the order has been received. It takes longer for the NI PXI-8513 reconfigure? Can I still do it, or I have to use the separator?

  I wad jump to use an interface to read and write.

  Thank you

  Ok. I misread your notion of echo. I understand now. I'm sorry.  The code you posted seems reasonable.

  (1) did you notice on or off for the session?

  (2) what baud rate? You can add a parameter of baud rates for the property to be explicit node.

  (3) I don't remember the name of VI, but you can add a status of Comm Get after reading. This will give you some information about the bus - if errors were detected, etc. Which can be useful to help debug.

• I read and write English but my husband reads and writes in Russian. How can I activate the taskbar of the Russian language?

  My husband is from the Russia.  It reads and writes in Russian and I'm having a problem turning on the Russian keyboard.  I went many steps of the menu start, Control Panel, regional and language options, languages, details.  I added the Russian.  under the Russia, there is a symble of a keyboard than Russian (typewriter) Russia and the United States.  acorrdign at every stage, there should be a tab in the bar of tasks showing that I can switch bewteen eglish and Russian.  who does not come to the top.  I have check the tab bar of language and made sure all the boxes are ticked, but I still can't find the language bar. what I am doing wrong?

  I don't need a translator who is the other thing that I still find.  I need for my husband who bought the computer to be able to type in Russian, his mother tongue.

  Thank you for your time,

  Heather

  See if that helps you

  http://Office.Microsoft.com/en-GB/Outlook-help/switch-between-different-languages-by-using-the-language-bar-HA010362283.aspx

• Lsass.exe on Vista constantly reads and writes three times. How can I stop this please?

  After starting calm down.  Task Manager indicates that LASS. EXE continuously reads and writes.  It shows three readings and three written a couple of times per second.  The readings are still 204 bytes and the writing are always 132 bytes.  This action stops.

  I searched the web for answers and tried all the suggestions and nothing worked.

  Any ideas please?

  Hello

  I suggest you go through the link that talks about a similar problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/thread/03638144-f4da-4349-B246-a27ec3727e70

  You can also post your question to:

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity

• Whenever I insert a USB in my PC is not autoplay, I do not have available to all group policy, and I can't read or write CD/DVD

  Original title: "Autoplay, group policy and CD/DVD"

  Hello

  I have two questions actually worry,

  First of all, I have Windows Vista Home Premium Service Pack 1 installed on my PC

  My first problem is that whenver I insert a USB in my PC it doesn't autoplay and the option is not available at all even when I get clich the drive itself, I went Microsoft support and installed security update 950582 and still no hope. I also can't find the NoDriveAutoRun or NoDriveTypeAutoRun in the registry because I don't have the key explore in both policies.

  In addition, I have not available to all group policy.

  My second question is that I can't read or write CD/DVD even if I have the driver installed, I tried the DVD Microsoft repair but it shows that the repair failed.

  Thanks in advance and hope to receive a solution soon.

  SAS ING.

  Hi Sas Eng,

  There are a few solutions to the question of automatic playback on the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  And if the solutions provided for the DVD ROM Lorien did not help, as you say, it is probably a hardware fault.

  Try the steps are on the link and let me know if it helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• with third party applications, I can read and write on the external drive HFS + for windows?

  Hello

  I see with third party app I can read and write to external disk NTFS on the mac computer.

  then othrwise, then I can read and write on extern hardrive HFS + with application of third party windows computer.  So who are the best third-party applications to read and write HFS and if they are free of charge on the external drive?

  Thank you

  Johan

  Now that I understand your goal, check out http://www.ufsexplorer.com/rdr_hfsp.php but your YMMV.

• Satellite L670-112 - SSD slow read and write speed

  Hello.
  I put 120 GB SATA III SSD kingston (read and write above 500 MB/S), but when I run the sequential test I get 150 MB/S read and 107 MB/S in writing. I know SATA II limitation, so should not write and read nearly 300 MB/S?

  Yes, it should at least reach SATA II speeds (close to 270 MB/s).

  Most SSD's 4K sector drives you may need to realign the 512 to 4K sectors using a partition alignment tool (I think that WD have one available).

• How to read and write attributes using the API?

  I'm trying attributes of access (read and write) of the following:

  SequenceFile

  Sequence

  The sequence steps

  When you look at the documentation of the API, TestStand, the following functions are available:

  PropertyObject

  Properties

  Attributes (read-only)

  HasAttributes (read-only)

  Methods

  DisplayAttributesDialog

  I tried to use the SetValString and GetValString commands using the reference of the attributes, but it does not seem that the data is stored in the file.

  I can't find the following information in the TestStand API:

  1. Where the attributes are stored in a property object?
  
  
  2. How can we access through the API?

  No advice and no information is appreciated!

  You must increment the number of changes to the file after that editing the sequence editor (or UI) won't refresh or mark the file, as amended. Use sequenceFile.AsPropertyObjectFile (). IncChangeCount().

  SequenceFile attributes are stored in the SequenceFile.Data, not the object of SequenceFile object. You can change them in the Advanced tab of the properties of the file sequence dialog box.

  Hope this helps,

  -Doug

• Problem with digital I/o read and write in CVI

  I have a PXI with PXI 6225 Renault installed box. For some uses, I wired 4 lines of digital port 0

  for its 4 top lines so that the output digital on bottom lines can be read as a digital input on the top lines.

  In the CVI program I have set up two input and output of tasks as follows:

  Enter task:

  DAQmxCreateDIChan (digitalInputTask, "PXI1Slot5/port0 / line4:7","InputLines", DAQmx_Val_ChanForAllLines ");

  DAQmxCfgSampClkTiming (digitalInputTask, ' AI/SampleClock ", 4000, DAQmx_Val_Rising, DAQmx_Val_ContSamps, 2000" ");

  Output task:

  DAQmxCreateDOChan (digitalOutputTask, "PXI1Slot5/port0 / line0:3","OutputLines", DAQmx_Val_ChanForAllLines ");

  DAQmxCfgSampClkTiming(digitalOutputTask,"ai/SampleClock", 4000, DAQmx_Val_Rising,DAQmx_Val_ContSamps, 2000));

  DAQmxCfgOutputBuffer (digitalOutputTask, 2000);

  I also started a task of analog input to ensure that the analog "IA/SampleClock" sample clock is running, and I check

  as I interpret the correct analog data of my analog lines.

  Here's the problem:

  I write 2000 identical samples of zero for the 4 lines (port0/$line0... (3) with the following command:

  DAQmxWriteDigitalU32 (digitalOutputTask, 2000, 1, 10, DAQmx_Val_GroupByChannel, sampleArray, & writing, NULL);

  After a while, I try to read the 4 lines (port0/4... (7) using the:

  DAQmxReadDigitalU32 (digitalInputTask, 2000, 10, DAQmx_Val_GroupByChannel, scanArray, 2000, & read_num, NULL);

  but the values returned in scanArray are nil!

  If I replace the digitalInputTask by digitalOutputTask in the above function call, I get the good samples rewritten

  (do not know how the 4 lines below that are configured in output mode can be read back! could it be just read buffer?)

  I don't know that the hardware configuration is correct, because when I try to emulate this feature in Labview, it works.

  (I use an output data acquisition assistant to write down the 4 lines of port 0, using a digital wave of entry, then)

  top reading 4 lines with the help of one Assistant DAQ to enter a digital waveform VI.

  In another test, I have 4 lines below in CVI, put on stop my CVI program, start a simple Labview VI to read from

  upper 4 lines and I can see the values I just write in CVI).

  Any idea what could be causing DAQmxReadDigitalU32 to read only zeros in CVI?

  I compared my settings in CVI with parameters DAQ assistant in Labview and tried to make them identical, but nothing helped.

  Thank you

  Try to use these examples to see if you can read and write in CVI

• Impossible to find the field read and write VI in labview 2009

  where is the field point to read and write VI in labview 2009

  According to the version of LV, BT pallets can be sensitive to the context. Try to create a project and add a fieldpoint target to the project.  Right-click on the target of FP in your project and select new > vi.  Now FP functions should appear