Satellite A300-1NO: Synaptics touchpad vs mouse Genius

Similar Questions

• Satellite A300-1NO - Power Saver crashes

  Hello

  I get a fatal error when starting electric saver application, code 0 x 2

  I have a Satellite A300 1NO with Windows XP. When the energy saver tries to start it gives this error code and accidents. This happens with the installer to start too.

  Assuming that the cause is the lack of files required by power saver. What can we then these files?
  ProgFiles/Toshiba and its subfolders are intact. I deleted some files from windows dir, who seemed unused, and needles. for example. directories and temporary files. And I think, that it is possible that some useful files have been deleted accidentally.

  So, it is possible that the cause is missing some files in windows? Otherwise, I have no idea of what was happening here exactly...

  Post edited by: Emoryy

  Hello

  I ve page no idea why your Power Saver crashes but before install you any what Toshiba you tools should updated Win XP to the current state, and then you need to install the common Modules of the European of Toshiba.

  Common modules is an essential component of Windows systems.
  He will perform the other original programming from TOSHIBA to work properly.

  So uninstall the old Power Saver, clean the registry and operating system with a free tool (i.e. CCleaner), install common Modules, and Power Saver.

  Good bye

• Need remote control for Satellite A300 1NO

  Hello world!

  I would like to buy a remote control for my satellite A300 1NO, but I have found no information on this tool.

  Most important, it's a remote controls exist for computers laptop toshiba?

  Thank you!
  PG

  Hello

  I started a similar thread about remote control on Satellite A300:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=37732

  If your laptop can be used with the remote control, you should get in touch with an authorized service provider. They sell all spare parts Toshiba and give you more information on this feature. :)

• Satellite A300-1NO - webcam does not work, but the LED lights

  Hello!

  I have a laptop Satellite A300-1NO, with Win 7 installed. My problem is that my webcam does not work always, when I want to use it. Sometimes, it works perfectly in Skype, WLM etc... but sometimes I see a white or a black screen with a 'loading circle' in there. Blue is the LED light, I can see it in Device Manager too, but there is no picture, just 'loading '. I tried to uninstall the driver and then reinstall it, I installed the new "camera Assistant for Toshiba", without success.

  Is there any solution for this?

  > Is there any solution for this?
  I put t think there is solution for this. If I understand you right there is a problem with software pre-installed. It is not easy to say why this is happening.

  I have Satellite A300 too and use it with Win7 32 bit. Webcam works fine all the time.

  One more thing: have you noticed this problem in the first moments after installing Win7 or later?
  Have you installed something that may be the reason for this?

• How can satellite A300-1NO - I record sounds?

  Hello. I have a Satellite A300 1NO machine, but I don't know how to put my sound card, because I want to record all the sounds that play my sound card. For example, listen to internet radio, and record a track of her.

  I cannot set my microphone to record it and can't see any more. WaveOut or something else... How could I solve this problem? I have the 6.0.1.5599 of its driver.

  Hello

  If you want to record the sound that plays the sound card, you need another program. So it is not possible to record sound only with the audio driver.

  There are many programs that can do this. I have good experiences with no. 23 Recorder. Use Google to find out. Its freeware and easy to use.
  In addition, there are some programs that streams internet radio, and save as. But I n t use such a program, but Google can help you find one.

  Welcome them

• Satellite A300-1NO - wakes up to the top of the standby mode

  Hi all!
  I have a Satellite A300 1NO with Win XP pro.
  The problem is that the laptop wakes up from sleep mode automatically after about 5 minutes.

  I tried unplugging all the cables (LAN, usb, etc.) but the power plug, but it's the same result.
  So what can cause this? What should I try?

  Thank you.

  You must disable Wake up on LAN function in the BIOS and Windows.
  Check the BIOS for this option!

  You can disable this feature in Windows if you right click on the network adapter > properties > advanced > wake on LAN

  I hope it works for you.

• Satellite A300-20 b - Touchpad does not work after BIOS update

  I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

  I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

  Does anyone have the same problem?

  Hey Buddy,

  Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
  Also, try to load the default settings in the BIOS.

  What happens if you connect an external mouse to the laptop? It work?

  I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

• Satellite Pro P100 - Synaptics touchpad problem with Win 7

  Satellite Pro P100 with Synaptics Touchpad, was now running Vista, Win 7 64 bit.
  The original driver had an option "disable when the external pointing device connected.

  I installed a Synaptics Synaptics_v14_0_3_C_XP64_Vista64_Win7 driver - 64_Signed_default.exe that does not have this check box.

  It works fine except that sometimes the Microsoft Mouse becomes works all the seconds that she or the touchpad to fight everyone. I have to disable the touchpad.
  So the next time I turn. If I do so without a mouse, I can't use the touchpad until I plug the mouse, turn it back on, then disconnect the mouse.

  Thank you

  Hello

  Try to install the Synaptics drivers and Alps touchpad page pilot European Toshiba.
  Choose the touchpad Win 7 drivers out for a satellite L500 series.

  By the way; the touchpad can be enabled and disabled by using the FN + F9 button combination. It is not necessary to have all the options if FN + F9 works very well.

• Satellite L955 - 10K - Synaptics Touchpad Driver is not working properly

  Hello, ASRR here.

  I had a problem with my driver for the Synaptics touchpad yesterday. I'm very used to use the "gestures" to work with my touchpad and the gestures did not work properly (in fact at all) for a while. Scrolling with two fingers, three fingers touch and others (in fact all the gestures) no longer work.

  The cursor moves, and works fine but not gestures.

  When I go to mouse option in the Control Panel, a window appears indicating that the PC is "Unable to connect to the Synaptics Pointing Device Driver." and asks me if I want to uninstall.

  I have tried to uninstall, and then go on to Toshiba support page and download a driver that has been adapted for my model, operating system, etc..

  When I implemented the driver I downloaded and restart the PC, the same window appears when I try to go in mouse options in Control Panel and gestures don't work.

  An interesting thing I noticed though, is the fact that when I back the driver (in the settings to properties then Hardware) gestures do FINE. However, as he always asks you to restart the computer for Rolling back the driver will take place, when I restart it, it defines the Microsoft 2006 touchpad driver. who does not understand the gestures that I need.

  I tried several times to fix it, but I can't. I went the UEFI firmware set up and tried to restore default but without success.

  I really don't know what to do. Could someone please help?

  My Toshiba model is a Satellite L-955-10 K with a 64-bit processor and system of operating Windows 8 initially installed.

  Any help would be greatly appreciated. Thank you

  > I went the UEFI firmware set up and tried to restore default but without success.
  How to understand this? Have you tried to put your laptop to factory settings?
  To be honest I don't understand what the problem is here. I also thought that the new driver installation can help but obviously it didn't help much.

  I don't know if this is an option for you, but you can set laptop to factory again and I hope that everything will work properly again. Before doing this test also to roll back OS to an earlier time using System Restore option.

  One last thing: it has nothing to do with your touchpad problem, but I recommend you create a recovery (recovery backup image) using pre-installed recovery media creator media.

• Update BIOS on Satellite A300 disabled the touchpad in WinXP

  Hey

  I just installed XP on my A300, the installation went well, until I updated the BIOS to to 1.7. After that, the touchpad is irrespeonsive, which means that it is displayed in the Device Manager, but does not.

  I tried the Fn + F9 key and after a long driver Hunt, I decided to re - install Windows XP, to locate where the problem was.

  I also tried resetting the BIOS by default, but once again, without a bit of luck.

  The touchpad still does not work.

  Is there a possibility to downgrade the BIOS?

  Hello Johan

  Can you please tell me what Satellite A300 you exactly (A300-xxx)?
  What model is your laptop?
  Almost all cell phones of the A300 are WXP supported and I can not imagine that the update of the BIOS can kill touchpad. It's very strange.

• Satellite A300-1NO - built in microphone has its Sun

  Hello everyone.

  I noticed that my microphone is very low volume. When I voice chat, people barely hear what I speak. I got the Realtek HD Audio Manager, downloaded the audio driver on the Toshiba site. All set to 100%, amp microphone is only 20 dB 30 dB is too noisy. I checked also Assistant of webcam. I don't know what to do.

  When I use the external microphone, it's OK. But the microphone is calm and flat, dim.

  Hello!

  I m not a Satellite A300 owner but it seems that you only need to update the audio driver. Here is the Toshiba document I founded on the site of Toshiba about this:
  http://APS2.toshiba-tro.de/KB0/TSB8A02FH0000R01.htm

  The driver can be downloaded here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite A300-1NO - Realtek in Windows 7 sound card problem

  Hey guys!

  I have a laptop A300 1NO and trouble with realtek audio I installed Windows 7 (x 86, 32-bit) driver.
  When I had Vista, I had 3 options to define how I want to record sounds. There was a microphone, microphone on the front and a "third option" which recorded the voices directly from the map its (perhaps waveout) and not by the microphones.

  Now, I can not find the 'third option' (record sound directly from sound card) just two microphone options. I can see the devices deactivated and disconnected too, but it still does not show me the 'third option' :(

  The freshly installed Win7 recognized my sound card and I got sound on that but he wasn't any icon 'realtek' in the control panel to change the preferences, as in Control Panel of Vista. I uninstalled it from the Device Manager, after that I install 6.0.1.5559 version (I've used it with vista x 86, 32-bit) but still the same problem...

  I don't really know what to do...

  Hello

  To be honest that I understand really what you would expect from an OS that is not released or not on the market yet...

  It takes a few weeks or months more until the official drivers will be available for Windows 7. It s the same as on Vista and XP. After the liberation, most of the drivers have been released.

  You can try some beta drivers for Windows 7 from the Toshiba page we.
  But that's all you can do at the moment.

• Satellite A300-1NO - Player cards and SD memory card problem

  Hello!

  There are a few problems with the card reader built into my A300 1NO. If I put an SD (SD or SDHC) inside, he wants to recognize the cards as the XD memory cards. In Device Manager window is therefore a "Ricoh xD-Picture Card Disk Device" listed here, with a yellow exclamation point, and the card is not at all as by car.
  With Memory Sticks, there is no problem, the player manages them almost without problem.

  I tried reinstalling the drivers by running the installation program "Ricoh Card Reader", which is downloadable from the toshiba site, but it did not help.

  So what's next?

  Hello!

  Did you remove the old driver before installing a more recent?
  And you can format the SD card using the Toshiba SD memory?

  Normally, the card reader must be able to read SD and SDHC cards too. Have you tried the cards from different manufacturers?
  I use the SanDisk Extreme III cards, and don t have problem with these cards.

  Good bye

• Satellite A100 PSAAR: Synaptics touchpad not working not not on Vista Ultimate x 64

  I decided to upgrade my XP 32 bit Vista x 64 Ultimate on my PSAAR A100.
  Operating system works perfectly except one thing - touchpad, which work perfectly under XP, is not answer at all under Vista x 64 (with SP1 of course).

  Worse, it's that my touchpad (Synaptics) is listed in as a work Device Manager correctly. Hmm - I don't remember. Meet your possible suggestions - I tried to reinstall, I tried to use the A200 drivers (since Toshiba does not support drivers for Vista x 64 for line A100) and even had the newer drivers from the Synaptics site. Update Vista even me has new drivers - cool, I admit, but it still does not work, even if Windows does not seem to "know" about any help would be very appreciated :) it...

  PS (optional problem) I also have 2 unknown according to Device Manager devices - since I have no idea what they are, and because I don't think I'm missing something - I simply gave up on top of those - at least for now ;)

  Of course, nobody here the solution for you. :(

  Problem is that this model of laptop is not supported for Vista 64-bit. I don't really know what you can try. Maybe install driver designed for A300?

  I don't really know. You can use an external mouse with success?

• Satellite A300 - problem of touchpad and keyboard

  Hello I have a problem.

  The first time I start the computer, the touch pad and the keyboard Don t run, and I need to connect a usb mouse to restart the computer. And in the second time, the keyboard and the touchpad to work correctly.

  I have a Toshiba A300 and I have Windows 7 Ultimate 32 bit
  This who could I do to fix this?
  My English is very bad, but I hope you understand me and that you can help me.

  Greetings!

  According to your message, you have to restart the laptop in order to get the keyboard and the touchpad works properly.
  There may be something wrong with the drivers for the keyboard and the touchpad
  As a first idea I would recommend to update the operating system.
  This means that you should check if a new installation of the OS could solve this problem.

  Keyboard driver is part of the Windows OS, so I think this should be verified.