Satellite A300 - connection Internet Super slow.

Just bought this laptop... really disappointed.

I used loads of drive recovery times and always slow speed of internet in WiFi and after a minute or two, it will disconnect and connect.

My game is normal, internet speed around 480 MB/s and my office of parents also normal (both are wireless). But the only laptop toshiba 2.3 KB/s... WTF!

Need help bad here, I have reinstalled the charges of pro/wireless intel driver time and still not good and reinstall loads the OS of the time and nada!

Laptop model - PSAG0A - 06M00Q

Hello

First of all, you should test the speed of WLan connected only with the laptop to the internet. If other computers are connected then this might affect performance too.

Then go to Device Manager and select WLan card properties.
On the Advanced tab, you can modify and change some options that might improve the speed of WLan!

Welcome them

Tags: Toshiba

Similar Questions

  • Satellite A300-1IH: Internet Explorer opens advertising in itself

    Hello

    I speak very good English, but I need your help.
    If you can, please respond in Italian, in the contrary case, it's the same thing in English!

    I bought my new satellite a300 1ih (W.VISTA) about a week before, but I have a problem: when I use Internet Explorer and Mozilla same, FIrerfox, it uses to open advertising web pages by itself.

    I have banned the pop up and I selctioned Protection-> high for everything.

    Then I looked online for a solution and found out that a lot of people have the same problem. What can I do?

    Please help me :( Sorry for the English

    In case I would recommend allowing a pop-up blocker.

    In IE-> tools-> Internet Options-> privacy-> turn the popup blocker

    Secondly I advise to use anti-virus software and Trojan and scan your entire operating system.

    Good bye

  • Re: Satellite L300-PSLB8E works super slow on Windows XP

    I have a Satellite L300-PSLB8E. It came with Vista Home Premium. After I did my recovery DVD, I did a SATA drivers downloaded from the Toshiba site. I did the F6 thing but kept getting always a bluescreen when the installation program got the 'starting Windows' I passed the SATA AHCI in BIOS compatibility and then managed to install XP without the SATA drive. What is strange, it's the sound LAGS and disk access is super slow. I ran a speed test program and he showed that the performance of the HARD disk are only 5% of the performance in Vista. I actually tested it on another laptop the same which was decommissioned and it had the same problem. Any advice? What is the AHCI Mode?

    > I had the SATA AHCI in BIOS compatibility and then managed to install XP without SATA drive

    This is the reason why your L300 runs slowly using Win XP.
    You have set the SATA in compatibility mode and now the HARD drive is not able to use the SATA performance.

    Your laptop would be faster using mode SATA and SATA drivers.

  • Satellite C660-1LD is super slow

    Hello

    I'm having a problem with my Toshiba Satellite C660 - 1LD PSC0QE

    Let me share the problem.

    So I have to use without the battery, most of the time when sudden power failure happens my laptop turns off also. Then I have problems starting upwards just on the black screen. I tried to change the memory in different locations, a disk check HARD and troubleshooting. The last thing I did was to reformat the HARD drive and tried to reinstall windows. Here are my observations:

    -My SATA in the bios configuration is DCIS, so windows tells me that it cannot detect any partition bootable windows installation is not possible to any partition of my HARD drive, but if I move the SATA configuration BIOS compatibility and windows continues to be installed on any partition that I want.

    I thought all right but, when windows are complete its installation suddenly an error pops up

    Now I don't know what to do. It's so frustrating. Then I accidentally inserted the recovery media and the laptop start booting from the disk and install windows and restore it to the factory with its bundled software setting.

    Now, here's the problem. It's so slow. Even the andbootup of starting Windows isso slow it would take 30 minutes just to start. the mouse cursor reacts accordingly except when you open a program or by clicking on the right button takes 10 minutes. Everything is so slow. Now I don't really know what to do.

    Now I am trying to reinstall all drivers and utilities with the latest versions. But I do not get a positive response. Is it a hardware failure? Is it because the SATA setting in bios was put on compatibility, although the default is ACHI?

    I still have to reformat? Help please.

    My advice to you is to use the recovery image only. By default the BIOS settings and install the OS by using recovery media. Recovery image contains all the necessary drivers, tools and utilities, so you'll have perfect configuration OS.
    What you need is small optimization of BONE.

    Take some time and read http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947
    It's old NET, but the principle is the same on the new machines too. As a small test remove application preinstalled antivirus and check if startup is faster.

    Please send comments.

  • WRT150N wireless - download speed of connection is super slow when I move away from the router.

    I have a suggested internet high speed through Comcast, and my wired computer is get 6 download MBS. My wireless laptop is close when I'm a few feet from the router, but decreases significantly when I move out of the room - up to 200-300 KPS.

    I can't even watch a movie from netflix on the floor without stopping and buffering several times in a 1/2 hour show.

    Long-story-short: I expect too much on this Wireless N technology, or is there something wrong with my router, connection, configuration, etc. ?

    The strenth of signal on my laptop shows excellent quality for good, but the speed is terrible.

    Any suggestions / advice?

    JL

    It could be due to the wireless settings are on your router has its default value, which is the reason why you might be faced with the problem. I think you need to change some settings in your router...

    Connection to the router configuration page and then click on the tab below the Strip Radio Standard - 20 MHz and the Standard 11 - 2, 462 GHz channel change and wireless... Wireless SSID broadcast should be enabled and then click on save settings...

    Then click on the "Advance wireless settings" sub-tab and below change the tag to 75 interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...

    Now let's see if you can locate your wireless network and try to connect...

  • Super slow when connecting

    I have windows 7 and my connection is super slow. All is well until what once I typed my password. It takes well over an hour for my icons on the desktop to appear, and I couldn't wait long enough to open the start menu.

    I'm sure that that my a problem related to Windows Explorer as all of a sudden, this problem started when Windows Explorer crashed and I had to reboot. Safe mode works quite well.

    Edit: the startup list with msconfig.exe in safemode made my working computer in normal mode.

    Hello!

    You can check the programs that start with Windows and turn off those unnecessary.

    1. start the Task Manager (press CTRL + SHIFT + ESC), go to the Startup tab, click right in the name column and in the menu shown tick 'Command line '. In the list, right-click on the programs you want to run at startup, and then click on disable.

    2. start msconfig.exe, Startup tab and disable unwanted programs.

    3. you can also look into the registry and delete the entries for the programs:

    Start-> regedit.exe

    Look under hkey_current_user\\software\\microsoft\\windows\\currentversion\\run

    and

    under

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

    and delete the entries you want.

    4. After doing the steps above & reboot, start the Task Manager and look in the performance tab how high the CPU activity remains in standby mode; If the CPU activity is high, you can look in the processes tab to find the process that is using the most CPU.

    5 make an antivirus scan.

  • Satellite A300 PSAG8E - unable to connect to the internet

    Hello.

    I have Toshiba Satellite A300 PSAG8E (product for Tuerkiye) laptop.
    My vista ultimate operating system.
    I can't connect to the internet.

    I have the new format recently.
    What should I?

    Hello

    If you use the WiFi network you should check if the wireless network adapter is enabled!
    You can activate using the FN + F8 key combination and, in addition, you should switch WLan antenna on IT (the WLan led should be flashing).

    Finally, configure the settings (SSID right, encryption, etc.) and connect to the router.

    All that s.

  • Satellite A300-1MC is slow using Win XP

    I recently spent 400 odd quid on this laptop.
    Hated Vista and installed XP Pro.

    However, I find when I get my screen 'connect' on XP, my office rises and it takes 10 years before you can start applications like Firefox, etc (hourglass, etc.). In fact its probably the same speed as my old Satellite 1900 d (which is 8 years old). But once it loads its fast 'enough' fast but not lightning.

    I've defragged after countless updates of windows and it seems to be faster. But still very disappointed. Any thoughts?
    Virus scanner is Mcafee Total internet

    I also played with 'start-up' thru MSCONFIG and got rid of things I don't need, but always without success.

    The A300 is really that slow? I don't have any normal office and questionable applications 2003 as mentioned above McAfee

    Any advice on the deactivation of some files that I need that is the Toshiba system that could possibly slow down?

    Hello

    I wonder how you installed Win XP?
    Did you change the SATA mode on compatible? Yes?

    Well, then this is the reason why the laptop is ruining more slowly than expected!

    If you want to get full implementation of HARD drive, then the SATA mode must be set to AHCI and you must install Win XP using SATA drivers!

    I recommend this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=39465

    Jimi post Nice link to the Intel Matrix Storage Manager which contains the SATA

  • Satellite A300 - give up WIFI connection

    I recently bought a Satellite A300, but unfortunately it keeps down the internet WIFI connection while surfing the net.
    It's only recently, in the last 2 weeks and I did not install new software that can do this.

    I have a connection by wireless modem netgear aged 12 months which is connected to my main computer (wireless).
    I use a secure connection which needs a wep key and is compatible with Windows Vista.

    I also use this connection for my laptop from a different manufacture that I have no problem with. I also have Wifi on Wii and Xbox so I was wondering if there could be interference. Xbox Cup connection also.
    I have only 2 related both objects and they are not even in the same place or even near each other...

    When I diagnose the problem it says weak signal, but the intensity of the signal on the computer shows excellent.
    If I plug the ethernet cable then everything works fine.

    Very puzzled as to why this happens, having run checks virus on computers and nothing.
    Uninstalling the connectivity doctor, still no joy.
    All that it suggest that there is problem ISP but given that I can connect to my other laptop and desktop PC and no problems so do not know if it is...

    Can someone help, I'm not very technical and am now very mentally drained

    Thank you

    Hello!

    First of all, you must update your WLAN driver. You can find it on the Toshiba site:
    http://APS2.toshiba-tro.de/WLAN/

    He recommended to disable some options that could have an impact on the energy-saving WLAN functionality.
    In your case I would deactivate the energy saving WLAN and maybe this document option is useful for you
    http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

    Good bye

  • WLan connected but receives no package - Satellite A300

    Hey my model is Satellite A300, which I went down to XP. After not using my laptop for two weeks, my wireless is dead and will not work.

    Problems:
    1. it used to automatically detect IP and DNS and gateway and all that, but no more

    2 so I put in place manually and that it is connected now - but still, it doesn't receive all packets, even if it sends packets.

    It's painful sssssssssssssooooooo... Help, please.

    Oh, by the way

    -Correct encryption
    -Good wireless driver
    Œuvres-LAN
    -J' tried to format my computer - that didn't work
    -Use all the drivers of Toshiba Europe, Australia, and Intel Web sites
    -Can connect to the network but not the Internet.
    -test of ping with my manual Gateway - 4 received, 4 sent, none lost

    Thank in advance for your help!

    Reset you the router? Unplug the power connector on the router, wait 10 minutes and then plug it. Maybe it still works.

    Check the settings in the router and windows. All devices must use the same standards.
    Search on the Toshiba site, if you have the newest BIOS and check if the TCP/IP settings are on automatically and in the router.
    Try turning off the router MAC address filter.

  • Satellite L750 - droping internet connection Wi - Fi

    I bought a laptop toshiba Satellite L750 yesterday, I've updated all the drivers, but nothing change still a hub connection fall super media Virgin (netgear router).

    Its right in the same room but the other room drop-down from 5 to 1 and sometimes I internet.maybe to lose someone had the same problem and give me some advice on how to fix it.

    Thank you

    > Whole in the same room but in other room to drop down from 5 to 1 and sometimes I lose internet.

    It looks like WiFi signal isn't strong enough and this is the reason why interrupt the WiFi connection.

    As Feliks mentioned; It might be possible that wireless network card does not receive enough power while running on battery then change the WLan settings in Win 7 power option for maximum performance of energy saving

  • Slow wireless speeds on Satellite A300

    I had a Satellite A300-1mc for Christmas and everything is ok with him except speed downlaod are very slow grace wireless, I removed mcafee, downloaded the latest drivers and speeds are still slow I even reinstalled the Intel (R) Wifi link 5100 AGN
    My laptop is downlaod speed about 10 maybe 20 kb/s while your desktop running through the same router gets speeds of 100 KB/sand, the laptop connected via lan gets 250 kb / s

    If anyone has any ideas help would be much apreciated

    Hello

    Everything is possible. Many people have the same problem, but in most of the comments, the problem is for Toshiba laptop.
    Thank you for your report.

  • Satellite A300 - cannot access the Internet more

    I would like to re - open this thread because I am facing a similar problem.
    I have a Toshiba Satellite A300 and I installed Windwos 7 two months ago. Yesterday, his suddenly, my laptop could not access the internet more, but the wireless lan connection worked well.
    Until this malfunction appeared in the list of active connection, there was only one entrance, my network classified as "Home network" but now, instead, there are two entry, it is my network classified as "Home network", the other is a 'unidntified network', classified as 'Public network '.

    I am sure that the problem is in my laptop and not in the adsl router because:
    1 - other people to join my network wireless with normal internet access.
    2. the problem always occurs with other networks currently used by third parties to connect to the internet.
    3 - the problem always with cable connection

    Windows reports no error.

    Thanks in advance for any assistance.
    Andrea

    Hello Andrea,

    To me it seems that you don't have an Internet connection so you always connected to the router but if you can access Internet t. You should look in the router configuration to see if it s is connected correctly.

    Try also updating the firmware on your router and disable security features to test this situation.

    Last but not least, you should try too update the wireless adapter driver. It can be downloaded on the official page of Toshiba. :)

  • Satellite Pro L500 - wireless connection is very slow and unstable

    Hello

    I bought a Satellite Pro L500 a couple of weeks (Windows 7 and Realtek 8191SE). I have no problem connecting to public networks, but I can't use it at my place, where I have a broadband cable connection.
    The strange thing is that, in the same room, I have no problem with my old A105 Satellite (Windows XP).

    It is also very strange the fact that, even if the signal is good, sometimes excellent, the connection is very slow and unstable (it disconnects when I try to browse the Internet).

    I have already tried:

    -Update the Realtek drivers.
    -Disconnect the firewall;
    -Modification of the properties of the Realtek card.

    Maybe it's a problem with the software or, on the contrary, with the material?

    Thank you!
    Poncet

    Hi Patrick,

    If you can connect to public networks correctly, I think that this problem is related to your router at home. So I would recommend updating the firmware on your router. You can get it on the page of manufactured goods.

    Also try to disable WLAN encryption and MAC address filtering.

    By the way: you can access the Internet at home via a cable connection?

  • The Internet-related problems with the Satellite A300-177

    Hi - I was wondering if anyone can help?
    I just got a Satellite A300-177, however when I connect it to the internet (I tried broadband wireless and mobile) images and low resolution is pixelated. I think that sometimes happens, but there is usually an option on a laptop to remedy (to do with disabling the option of your laptop, save images low resolution to run faster) however this particular model does not seem to have this option (as tested by our technician COMPUTER)!

    Please can someone tell me if they have the same problem before I return it because I like really this laptop apart from that!
    Thank you!

    This part of the operating system or Internet Explorer option? This option does not for me because I never noticed anything like that.
    I also believe that the COMPUTER technician knows the difference between the responsibility of Toshiba and Microsoft. If this option is part of the operating system or THE Toshiba has nothing to do with this and you should check the Microsoft Knowledge base to see if there is a report thereon or similar problems.

    If you find more on this topic please let us know.

Maybe you are looking for

  • Purchase on the receipt that I did not buy

    Hey there, I was going through my email today and noticed that I have an invoice from July 8, 2016 for three applications, which I bought. In the past, I bought Grand Theft Auto: San Andreas, but I have never bought Death Rally or Red Ball, so I don'

  • I use an IEEE-488 GPIB connection to a keithley 2400

    I use an IEEE-488 GPIB connection to a keithley 2400. I get an error - 111 an error header seperator and a header not defined-113. I need to know how to fix this problem and install this keithley with a probe workstation. I'm new to labview and uses

  • HP EliteBook 2760p: security for the Client software HP will not install on Windows 10 Version 1511

    I got the HP Client Security software installed and running under microsoft Windows 10. It will install is no longer under Windows Version 1511 10. - Or nearby - 17 November Microsoft has released an update to Windows 10 Version 1511.The Windows Upda

  • Pavilion dv6t-2000 - cannot recover from the recovery partition

    Hey there. I'm trying to restore my laptop with Win 7 settings, but I can't seem to restore from my recovery partition. I tried the F8, F11 key and on the ways to office with no luck. In some of them, recovery option is grayed out, but using the reco

  • ImageToArray for color image?

    I'm using Labview 8.2 and NO vision There is an example OR called imagetoarray that uses the ImagtoArray.vi function; in the example, the source image is a monochrome bmp image, and the only value resulting for each pixel, I suppose, must be the inte