Satellite A300 restarts when I connect AC adapter / CC

Similar Questions

• Satellite A300 - restarts when I plug it into a power outlet

  Hi guys this seems to be the place to ask this question,
  My laptop is Satellite A300

  When I connect the adapter it restarts all of a sudden, if I stay on the battery, it is fine if I am running Windows and plug power will be locked up and restart. It starts so that plugged either, unless it is in safe mode. With the power of the battery (with power adapter) machine works without any problem.

  The problem (reboot) occurs when I connect to the AC adapter. I have change the power supply and tested. Remove the battery and tested. In addition, reformat and reinstall Vista and BIOS update.

  But the problem is still there, please can someone help me?

  Thank you!

  Hi icebunny,.

  Do you use an original Toshiba AC/DC adapter or a 3rd party one? This would explain why the computer restarts. Probably he doesn't use the correct specifications for voltage or intensity thus restarting the laptop.
  Did you check the characteristics of the AC/DC adapter? The lower side of your laptop, you can check which adapter AC/DC (e.g. 19V 4, 3 a) is necessary.

  Can you charge the battery when the laptop is turned off?

  At the moment I think that it s mainboard malfunction and that would mean that he must replace :(

• Satellite A300 restart when it is plugged power

  Hi all
  I see some of these problems arise in the forums and I was wondering if anyone has a solid answer as to if this is fixable or is the laptop useless now.

  Satellite A300
  No error log display software errors.
  Error recovery reports an unexpected shutdown.
  Recovered the system using that a disc of recovery on the 3rd test and the problem persists.

  Although battery-operated system is functioning properly, but the battery life is simply not long enough that the laptop is my main computer.

  The laptop is now outside its warranty period and if I can not understand that I might as well use it as a doorstop and buy something else.

  Thanks in advance for your time

  Your mobile phone is turned off, you remove the battery, connect the power adapter and switch it on. What happen next?

• Satellite A300 - 12K unable to connect to the ADSL wireless modem

  My Satellite A300 - 12K suddenly cannot connect to a dsl wireless modem... There are no changes made to the parameters of
  However it connects to a modem that is not encrypted.

  Any idea what the parameters might have changed?

  Hello

  Why you n t reset the modem and check the settings?
  Configure encryption of the modem settings and encryption settings of the WLan card.
  Check if you are using the right key and change it if necessary.

  Sorry but there is no magic answer for you question, we must check everything and if necessary you must reconfigure everything!

• Satellite A300 stops when the power adapter is connected

  Hello!

  Yesterday, I bought a new Satellite A300. I plugged it in, worked some time with her and then I decided to stop it while it was plugged.
  The computer has stopped working, but in a few seconds, he started alone.

  I tried to do it while it was disconnected and there is no problem, but when it is plugged the problem persists.
  I would be happy if someone can help me!

  Thank you very much!

  I would try a BIOS update. You can download it here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Satellite A300 stops when the power adapter cable

  Hi people

  When I connect the power cable for my toshiba satellite a300, it stops immediately. I can use it on battery normally without any problems.
  When I boot in safe mode, it works fine without any problems with the AC adapter plugged into the laptop.
  Operating system is Windows Vista
  What is the reason? What can I do to fix this?

  Thank you

  Can you use it for laptop with AC power only when the battery is removed?
  If so, boot up your laptop and when the operating system is loaded to put battery inside, wait a few minutes and disconnect the power supply.
  Plug it in again and let us know if the same thing will happen again.

• Satellite A300 restarts randomly when it is plugged in power chords

  I know it has been on many topics and forums before but-

  Satellite A300 Toshiba registered repairman after only another technician claimed the question was the motherboard.

  So a new hard drive had to be replaced (it was old age) by registered repairer.

  Graphics card died - map is part of the motherboard = motherboard replaced.

  Supposed to win - phone to make sure everything is well = "there still the issue."

  QUESTION = RANDOM COMPUTER RESTARTS WHEN THE POWER CORD IS PLUGGED

  Don't forget not that the shop has been informed of the initial question
  1. phone call.
  2. by myself (wife) when I dropped the camera repair
  3. in the drop by my husband via phone
  4. by myself at diagnosis
  5 once again by my man when diagnostics
  6. by my man when he discussed the hard drive with 2 people at the store options
  7. after replacing hard drive
  8. by myself when new montherboard was "mandatory".
  9. my man at the same point

  So you can imagine today is both 10th, 11th and 12th, the store has been said that they do not listen

  I got to say REGISTERED REPAIRER WHAT TOSHIBA to TROUBLE THE PROBLEM!

  NOW for my NEXT question.

  On all THE forums I have read about it, I always come back to the same answer - replace NEC/CATHERINE Proadlizer

  However, in looking at the published images and instructions I now get the image that this is part of the motherboard also. This is why I wonder how actually to our brand new motherboard installed days ago!

  If the capacitor is part of the motherboard I think which was replaced why this question is STILL being implemented?

  If not where is it located?

  At our graphics card on the old Board REALLY dead?
  Or was this like the last technician and as demonstrated - surprisingly not listening?

  All related information (and directions to give the tech) would be greatly appreciated.

  Hello

  I'm really sorry to hear that you have such problems after Exchange of motherboard and I really don't understand why service is not properly check and test the features of the laptop.
  To discuss these issues is quite complicated because we can only speculate what may be the problem and no one can say with certainty why this happens.

  In my opinion all you can do is to do some tests and try to do a rational conclusion, but in the end service should solve the problem.

  Just a few questions about described:
  Everything is OK is when you use the power supply battery?
  How it works with power supply current when the battery is removed?
  Start the machine and enter the BIOS settings. Leave it for a while and check if computer laptop turns off again?
  What operating system do you use? Are you using the original OS that you got with the A300 or clean install of the OS?

• Satellite A300 - restart of the equipment when installing Win7

  Hello

  I have laptop Satellite A300-24Z, and I try to install windows 7 on it, the installation of the computer restart or get the bottom blue screen (not BSOD) and stuck.
  It s is usually spent on extraction of the files step.
  Help, please

  PS
  It s not a hard drive, I have already replace without a bit of luck

  Hello

  You can install another system of Windows Vista or XP for example or you have the same problems the other systems?

  However, to check if the default BIOS allows you to install Windows 7
  In addition, try to set the SATA mode in compatible mode or AHCI.

• Satellite A300 - restarts if I plug charger

  Hi all

  I'm on Toshiba Satellite A300 (psag0n/00w00u). Today, I installed Vista home edition. Now, I am facing strange problem that is my lappy restarts automatically as I plug in charger. This problem started suddenly previously installed OS (Vista ultimate), but at this time there I didn't notice if this only happens when I plug in charger. It seems to be a hardware error.

  Can you please help?

  Thanks in advance,
  Fox

  Hi remy,.

  In my opinion this has nothing to do with the Vista installation restart your laptop if you plug in a charger.

  To me, it looks like a hardware problem and your laptop should be checked by a technician of the laptop. Maybe the motherboard needs to be replaced or something else.
  By the way: you use the original from Toshiba AC adapter or another?

  If you use the original Toshiba adapter, contact the service provider authorized in your country. If not try again with an original Toshiba adapter.

• Satellite A300-1J1 fails to connect WIFI

  I have a Satellite A300 1J1, purchased in September which I use in college.
  At home I have Virgin Broadband and my laptop is easily connected to it.
  When I get home I can not connect to broadband home.
  I put in all the correct passwords (it uses 3com) but my phone just crash log.
  It is not the home network, because my brothers laptop computer running smoothly at home. The problem is my laptop.

  I could buy a separate connect package and a dongle, but it seems stupid when I should be able to connect automatically.

  Can someone tell me what I could do to please which is not too difficult technically?

  Hello

  You should first check if your wireless network card has been recognized and properly installed.
  I noticed that in very rare cases the WLan driver was not installed correctly and there was a yellow exclamation point next to the WLan card.

  The WLan driver correctly installed is essential to connect the laptop wireless.

  Welcome them

• Satellite A300 - give up WIFI connection

  I recently bought a Satellite A300, but unfortunately it keeps down the internet WIFI connection while surfing the net.
  It's only recently, in the last 2 weeks and I did not install new software that can do this.

  I have a connection by wireless modem netgear aged 12 months which is connected to my main computer (wireless).
  I use a secure connection which needs a wep key and is compatible with Windows Vista.

  I also use this connection for my laptop from a different manufacture that I have no problem with. I also have Wifi on Wii and Xbox so I was wondering if there could be interference. Xbox Cup connection also.
  I have only 2 related both objects and they are not even in the same place or even near each other...

  When I diagnose the problem it says weak signal, but the intensity of the signal on the computer shows excellent.
  If I plug the ethernet cable then everything works fine.

  Very puzzled as to why this happens, having run checks virus on computers and nothing.
  Uninstalling the connectivity doctor, still no joy.
  All that it suggest that there is problem ISP but given that I can connect to my other laptop and desktop PC and no problems so do not know if it is...

  Can someone help, I'm not very technical and am now very mentally drained

  Thank you

  Hello!

  First of all, you must update your WLAN driver. You can find it on the Toshiba site:
  http://APS2.toshiba-tro.de/WLAN/

  He recommended to disable some options that could have an impact on the energy-saving WLAN functionality.
  In your case I would deactivate the energy saving WLAN and maybe this document option is useful for you
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  Good bye

• Satellite A300 PSAG8E - unable to connect to the internet

  Hello.

  I have Toshiba Satellite A300 PSAG8E (product for Tuerkiye) laptop.
  My vista ultimate operating system.
  I can't connect to the internet.

  I have the new format recently.
  What should I?

  Hello

  If you use the WiFi network you should check if the wireless network adapter is enabled!
  You can activate using the FN + F8 key combination and, in addition, you should switch WLan antenna on IT (the WLan led should be flashing).

  Finally, configure the settings (SSID right, encryption, etc.) and connect to the router.

  All that s.

• Satellite A300 BSOD when installing Windows XP

  Bought a new Satellite A300 that ships with Vista and a load of other rubbish.
  Set the BIOS to boot from the installation CD of Windows XP, but just after loading the drivers and files and just before
  from Windows XP installs, crash with blue screen advising me:

  A problem has been detected and windows has shut down to prevent damage to your computer,
  blah, blah. In other words blue screen of death that ends with this message - STOP: 0xF78D2524, 0 x 00000000, 0 x 00000000

  Now, I've had quite a few machines over the years, but never something like that before you encounter when you try to
  install an operating system.

  Any advice appreciated, otherwise unit will have to go back to the seller.

  Thank you

  Joe

  Access the BIOS-> SATA mode choose and is compatible-> save the changes and exit the BIOS.
  Then try to reinstall Win XP with SP2.

• Laptop freezes when I connect AC adapter / CC

  Hello. I have a Dell Latitude E7440. The laptop starts with the office end while its connected to the power adapter. It starts very well in a stack on the desktop and works normally. But the problem occurs when I connect to the AC adapter when the laptop is turned on, it freezes, for example when sound on the desk and I connect to the AC adapter, it freezes and does not respond. When I unplug the AC adapter, it takes over and works normally again. When I connect to the AC adapter again it hangs and when I disconnect, it resumes its normal operation. The third time that I connect to the adapter, it does not freeze. What could be the problem? Any help is appreciated please.

  Hi Dwaine David,

  Please write to us.

  When the issue started? Is there any hardware or software changes made recently?

  Please update the BIOS if not yet done so, to support.euro.dell.com and respect for any change,

  If possible, please try another card as well.

  Please provide us with your system tag #, email address and your name via message private.

  Concerning

• Users randomly requested to restart when they connect

  See 5.1.2.  Non-persistent pool with active persona.  Randomly, users will be asked to restart the virtual machine when they connect.  We tried several versions of the agent, no difference.  Only happens not each time or each user.  I can keep connect power about 20 times... get 20 different VMs (clones all connected) and maybe see invites him to restart once or twice.  This * seems * was related to the persona somehow, since it is the only pool that we have with the character and the only pool with this problem.  Anyone else seeing this?

  Thank you all!

  JCkelsey,

  This may help: http://communities.vmware.com/thread/435615?start=0&tstart=0

  We have our distributed vm on 3 servers.  All with different processors.  We'll know if it worked in the morning.