Satellite A300 - Vista will not load successfully

Similar Questions

• Satellite A300 - Vista does not load, the computer does not start

  Satellite A300
  Model number: PSAGCA-02W010

  Vista won't load; have you tried to start repair; System Restore and boot in safe mode, none of them work. I get the error "error 0 x 80070570: the file or directory is corrupted and unreadable."

  I don't know what I did with my recovery CD; or if I even got one with my purchase (from Harvey Norman).

  Please tell us what can be done.

  Hello

  What you can try is to install Vista using disk HARD recovery option.
  How it works, you can read on http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  If it works all the data saved on the C partition will be deleted but the data saved on the D partition will always be there.

• Satellite A300 Vista - will not start cd/DVD with backup

  Hello world

  I have a big problem with Toshiba a300. Windows Vista is not starts.

  Watch only the menu with 2 options: first "fix the system" - when I choose this option 10 seconds later I see messeage: click OK to turn off the computer.
  When I choose the second option in my laptop restart every time.

  I tried after turning on the computer, press F8, but all the option in this menu do NOT fix the problem.
  I have no CV/DVD to my computer.
  After the first time I don't burn DVD with backup.

  I have really now how can I install system with recovery patriction. What softwere I need and how do I do it?

  Thanks for help

  Hello

  Sat A300 and other new models of laptops are equipped with HARD drive recovery option. This HARD drive recovery should allow you to recover the laptop without the use of all disks.
  In order to start the procedure for HARD drive recovery, you need to press F8. Then choose the first option called fix my computer. Then new window pops up and there you have to choose Toshiba HDD recovery. All that s.

  But if this procedure don't work (no matter why) then you will need to use the Toshiba recovery disc. If you n t create a floppy disk for recovery of a hand and the laptop will not start, then you will have to buy a drive for recovery of this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Vista will not load?

  Vista will not load on my laptop I want to put Windows 7 on it just nee do the upgrade or I have to do the full install?

  Install Windows 7 to try to resolve a problem of Vista is never a good idea. You must fix the problem Vista and then upgrade; or download a full version of Windows 7 and install it.  Try to upgrade a non-working Vista system will likely cause bad results.

  "Tony1429" wrote in the new message: * e-mail address is removed from the privacy... *

  Vista will not load on my laptop I want to put Windows 7 on it just nee do the upgrade or I have to do the full install?

• Vista will not load after complete reinstallation

  It is a dell laptop inspiron 1720. system was ok before. lost password admin and not a lot of data on mahine. said best is to just do a clean reinstall. Vista will not start after re-installation complete. hard drive formatted and loaded into the partition c: System just hangs up on the black screen with bar across the bottom. using the software included with the purchase. He never asks for product key when loading. No repair or available safe mode. I used the software that came with the device. Help, please.

  Hello

  If the dell recovery software will not properly work, you will need to contact dell

  It's their recovery process

  Here's how their recovery process is supposed to work

  with the disk

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  with their recovery partition

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  Dell support

  http://support.Dell.com/

  Dell Support Forums

  http://en.community.Dell.com/support-forums/default.aspx

• Satellite A300-288 does not load the operating system

  Hello everyone.

  Today I turned on my laptop A300 and does not load the operating system. In other words, Toshiba logo appears, the message "Press F2 to enter SETUP", but not in continuity with the boot. Yesterday it worked and did not update the BIOS or something else.

  Someone has an idea? I deleted a both SDRAM and vice versa, to check that the problem wasn't RAM, but no. There is no beep. LED touch 'NumLock' and other, power on and off when I have impulses, so the keyboard responding but by pressing F2 or F12 does nothing.

  Thank you very much for your help.

  Start your laptop with F8 and test if you can start the operating system in safe mode.

• Satellite L300 laptop will not load Windows

  I have a model of Satellite L300 number PSLB0A - 00L 022 running windows Vista.

  The problem is that it does not load Windows. It starts ok and I can access the boot manager and the Setup utility and that's it. It stops just loading.
  After studying the problem, I ran a car aptitude test and the result was the error code 0 x 70. After looking at the code I m under the impression that I need to erase the disc. I have no problem with that.

  My question is - if I run the windows Recovery Wizard will be it solve my problem? I will have to re install vista at all? All advice is appreciated!

  Hello Jane and welcome in the Toshiba forum

  After reading your ad, I must say that the best solution and easier for you is to reinstall the operating system via original Toshiba recovery DVD. This DVD contains the operating system, all necessary drivers, specific Toshiba and utility tools. After recovery image installation you will get state out-of-box and clean the preinstalled operating system.

  Yes, this should solve your problem. Please note: when you do it all saved data will be deleted.

  You have some important data saved on your laptop?
  Do not use this disc reinstall Vista and everything should be ok again.

• Satellite P500-12F will not load the drivers of track pad!

  Hi, I just got a DVD driver for this lappy and is a self intall of all drivers that are missing or that need to update, when ran I was told of the Skate track had disappeared, and started to load, but it will not I tried a load of strength in vain Hat too, the track pad did not work since getting this second hand could the block be disconnected from the motherboard?
  This would make the driver not loading please?

  Any help would be really appreciated.
  Thank you, Wayne...

  Hello Wayne

  In front of me, I have Satellite P500 and I use it almost 10 months now without a single update. What I'm updating are important updates from Microsoft. More than that and so far I didn't notice a single hardware or software problem.
  After reading your ad m a little confused.

  As far as I know Toshiba doesn't offer any DVD for that laptop, not any kind of pilot DVD so please be so kind and tell me which DVD driver is and who has created and offered this DVD.

  original is Win7 64 bit OS (original image of recovery Toshiba) preinstalled on this P500?

• Windows vista will not load or run.

  on startup, I get a repar recovery option. I hit that and nothing happens but a blue screen. I don't have to restar windows wndowsdisk. what I can do. cant it be started

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you are finished,

  See you soon.

  Mick Murphy - Microsoft partner

• Vista will not load and continually reboots, recovery disk does not start.

  I have a Dell with vista on it. Recently, it has automatically installed an update and now it does not load Windows at all. It goes to the screen where I have the opportunity to "start in safe mode" "safe mode with command promt", "last known good configuration" etc. and none of these work options (all start loading them upwards and then the computer restarts just itself).

  I tried to put in the cd of installation for vista, but it won't start. I changed the options in the BIOS so that it starts from the CD first, but then it just goes to another blue screen that says: there was some sort of system faliure, and the only option is to restart the computer.

  I also tried to connect an external dvd player to see if he was not playing the disc because of a defect in material, but the same thing happens.

  I also tried out the RAM and it put it back again (a single website suggested I try this).

  Nothing seems to work! And now, I am out of options and have no idea what to try next - help!

  http://support.Dell.com/

  If it does not start where install Recovery DVD from Dell, you will need to contact Dell at the above address.
  As you say, you have changed the boot on the appropriate drive order and still nothing

  It would seem that you have a deeper problem that just a straight reinstall the problem.

  See you soon. Mick Murphy - Microsoft partner

• Satellite A300 PSAG8E does not load

  I have a Toshiba Satalite A300 PSAG8E, which does not load.
  I was given a few days ago by a person stating that he is not working or light - vague details.

  At the reception that he turned on, asked to start windows normally or not, then started absolutely perfect, it powered by the charger, no problem.

  I let him on during some time different tasks.
  I came to him a few days later to find that he had himself set to off.

  I enabled again, how he asked to start windows normally or not. I started normally, and it came on the property.
  Since then I could not to power it on the sector.

  Why not load it now?

  Hi mate

  > Since I could not to power it on the sector.
  > Why didn't he care now?

  I m a bit but confused. What's wrong now? You are not able to feed the device or battery is not charging?

  If you are not able to turn on the unit, then you should try this:
  -Disconnect the battery and AC adapter
  -wait a while (2-3 hours)
  -connect the two parties to laptop and check again

  If your battery does not load:
  Try to update the BIOS and set its default value
  If that does not help, then the battery should be checked
  If the new battery does not solve the problem, then the motherboard must be checked and replaced if necessary.

• Vista will not load, it freezes.

  Original title: Vista does not

  My laptop under vista family premium crashes during the windows loading and just stay there (the screen with the windows logo and mobile bar), I tried to get into the setup by pressing F2, starting in safe mode, but just, it lists some actions and stop for a while before going to the configuration again screen. Have been impossible to get more to do a restore of the system, or anything else. Help!

  Hello

  Method 1: Do startup repair using the suggestions from the following link.

  Refer to 'How to use Startup Repair " contained in article

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 2: Try to run the system restore by using the system recovery options.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  I hope this helps!

• Satellite A135: Vista will not start after replacing HARD drive using the recovery disk

  Toshiba Satellite A135-s7403 HARD drive failed, I have replaced the 80 GB with a WD Scorpio blue 250 GB hitachi. When I try to restore with recovery disk came with the laptop, it passes through two discs 1 and 2 and starts with the start-up of windows for the first time and then runs to the greenish with the spinner blue screen please wait... thne black screens for a second or 2 and then back to spinner, please wait and then it appears the box "installation of windows could not configure windows to run on hardware. This computer' only option is to click OK.

  Where to click ok, you get an another msg that says "windows could not complete the installation, install reinstall windows. I tried like 50 times now. Startup Repair indicates the root = failure cause while the installation program is underway. I know that my drive are good, as I adjusted used then about a month when I upgraded the memory because the original memory 512 MB was not enough o well running vista.

  Hello
  To be honest I n don't know what the problem is there but can you get the original installation disc of Microsoft and try to install the OS, just to see if the OS installation will complete successfully?

• Satellite Pro U500 will not load

  Hi all

  I have a little used old U500 of 2 years, and I am puzzled.

  A few weeks ago I noticed my light on and it would not charge battery charge.
  I didn't watch the charger light on the transformer - which was lit, so ended up paying £20 for a battery note that it would not yet of course load wasn't a bad battery.

  On the plug-in transformer/charger light showed green so I guess then it must be a faulty Jack inside my machine because there was able to get out the transformer plug / the green light is on.

  Today I disassembled the machine and I have replaced the plug connector on the motherboard - no problem, it starts and it is not yet taken on a charge. I have spent £30 on this piece of cr@p so far, should I now buy a new cable from charger etc?

  I have a faulty plug/transformer - despite the green light showing that is powered or is there anything else I can try?

  The charge or power on my laptop light is lighting up.

  Help, please!

  see you soon
  Craig

  Hello

  I would be really surprised if someone here would be able to tell what's wrong with the laptop, I doubt that this is possible without test equipment and execution of some hardware diagnostic tests.

  > Have I not a defective/transformer Plug - despite the green light showing that is powered or is there anything else I can try?

  I don t think that the power adapter is faulty. As I understand you, the laptop features and you can use it plugged in. This means the AC adapter to power the laptop and this means that the adapter is ok.
  In General, you should be able to use the laptop, even if the battery is removed. So in my opinion, it seems like that the question must be related to electronic on motherboard problems because the new battery does not solve this problem of load

  By the way: it's your BIOS up-to-date? Would be interesting to check this

• Satellite L40: Vista will not open the docs Word XP

  I have a new L40 and were transferred from the old XP docs. The new L40 won't open word documents. Can anyone help?

  DaveM

  Perhaps you need to install Office on your new Satellite L40, initially ;)