Satellite A500 - HARD drive recovery option is no longer available at the F8 Menu

Similar Questions

• Satellite U400 - cannot find HARD drive recovery option

  I'm doing a full recovery from the computer by using the HARD drive recovery procedure, but the problem that I can not find the entrance (to fix your computer) when I press F8 after you restart the computer.

  My laptop is: Toshiba Satellite U400-144
  Model: PSU40E - 03P00WAR

  Kindly advice what to do.

  Hello

  Normally, you can start the drive HARD recovery function if you press the F8 key to go into the advanced boot menu. After that, select Repair my computer and in the next window, you can choose the option of Toshiba HARD drive recovery.

  By the way: which OS you have installed right now? HARD drive recovery is possible on a preinstalled OS to Toshiba!

• How to start on Satellite A660 HARD drive recovery?

  I recently bought by Satellite A660 and the laptop has been infected with can of virus will start any program even couldn't do any disk recovery. So I try to read the FAQS and guidance that I tried to do the hard drive's default factory setting.

  I follow the directions "Press 0 & combination Power button" at the start of the hard disk to recover the system.

  Make a hard drive recovery system still ask for disks. Therefore, in this case there is no solution. Please let me know how I can do hard drive recovery system.

  Thank you

  Can you please tell me what model of laptop you have exactly (A660-xxx)?
  What is this Europe or US model?
  > Making the hard drive recovery system still ask for disks.
  I put t understand it. Can please explain you a little better?

• Duplex option is no longer available after the Mac 10.8.3 driver update

  After an automatic update of the software which included an update of the HP printer driver, the print duplex option is no longer available (i.e. it is grayed) when you print my Officejet Pro K550.  This has happened on a BONE earlier too, wher ethe duplex option disappeared after an update of the driver.  The option was agin available when I went up to 10.8 but the new update he removed again.  Any advice would be appreciated.

  Hello

  Let us ensure that the duplexer is always enabled in the driver.  If you can open Sys Prefs, go to print, Scan, double-click the printer in the left window, click Ontario right driver tab and make sure that the check mark is in the option HP two-sided printing Acessory.

• Cannot retrieve Satellite L300 using HARD drive recovery option

  Hello

  I'm trying to restore to factory settings but have no luck.

  I tried pressing F8 when the toshiba logo comes back, it goes to the screen of boot in advance and I select computer repair and it boots to windows. I don't get the recovery options.
  I also tried pressing zero when switching on the laptop just rings home.

  What im I doing wrong?

  It is a vista running L300-149

  As I see all you do is right.
  Turn on your laptop and press F8 several times and you will enter the Advanced startup options

  The first option should be repair your computer and after two or three steps, you should see The System Recovery Options , and last option there Toshiba recovery.

  Have you used this recovery options in the past or you are trying to use it for the first time?

• Satellite A500 - HARD drive will not show up in BIOS

  Hello

  My A500 worked very well the last few days and now it has just stopped so I tried to reinstall windows, and it says something about not being HARD drive not in the BIOS so I checked the BIOS and its not there, but in the windows 7 install disk sound.
  I have run chkdsk and there is nothing wrong with that, I also put in my other laptop and it appears as a thin hard drive.

  Any suggestions that I am out of ideas

  Thank you

  By default the BIOS settings and try to install the OS. Does work or not?
  One last thing: when you start Notepad and press F12 to enter the boot menu, figure disk in the list?

• "Recovery to replace key" option is no longer available on the Web site

  So I decided to turn on notification of two factors for my Apple devices. From my iPad 2 is always on iOS6 (for reasons of productivity), he asks me a key to recovery. Instructions on the Apple site send me appleID page, where I can probably replace my lost key. The cool thing is that the option is no longer on the page! When I click on "Edit" in the Security section, I don't see any mention of the recovery of such key.

  Anyone else having this problem?

  Hello

  Read and follow the steps described in the following articles:

  If you cannot connect with two-step verification using your Apple ☞ https://support.apple.com/en-us/HT202649 ID

  Frequently asked questions about the audit in two steps for Apple ID ☞ https://support.apple.com/en-us/HT204152

• Portege won't go in HARD drive recovery

  Hello
  I have a laptop Portege that I want to get back to the default settings after news of windows 7 has been installed on the system. I did it in the past of the system while now the key 0 down however now I see when I do it is the label of "HARD Drive Recovery Mode" down left and then the operating system loads normally.

  No idea what is the problem here? How can I force the recovery process?
  (I don't see the recovery partition in Windows.)
  Thank you
  Erez.

  Hello

  HARD drive recovery option is available when the laptop to factory settings.
  >... after a new of windows 7 has been installed on the system.
  If you have installed your own Windows version HARD drive recovery option is no longer available.
  In this case, you can install original recovery image using recovery media (DVD).
  You have created the media according to the instructions described in the user s manuals document?

• Satellite L650-11F - how to access HARD drive recovery?

  Hello!

  I have a Toshiba Satellite L650-11F.

  The other day I had a huge massive Goner virus (lol) and the computer is turned off. Whenever I tried to turn it on, it started to load Windows, and then restart. I tried to start Windows in safe mode but the same thing happened, just keep restarting. I tried to repair Windows (by pressing f8 and etc.) and without success, he kept restarting.

  So I tried to put it because it came from fabric and when I press 0 or F1 happears just 2 options: choose an opperating system to start or press tab to select a tool: Windows 7 tools: Windows memory diagnostic

  Can you help me please? Is there another way I can access the hidden hard drive recovery partition? Please :(

  Hi dakova,.

  Ist it Toshiba's original OS is still installed? I ask this question because it of necessary for the recovery of HARD drive. If you have installed another OS, you can access t HARD drive recovery option.
  In addition, recovery of HARD drive option is available if you press the F8 key before Windows starts. In the advanced boot menu, select fix my computer. The exact procedure is described here:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  Alternative, you can take the Toshiba recovery disc. This will also restore the original settings. :)

• HARD drive recovery - Satellite P300-1GQ

  Is it possible to perform software factory default recovery or recovery of State out-of-box for my laptop Satellite P300-1GQ?

  I ve used Toshiba HDD Recovery Tool and it only formatted the C partition leaving unchanged D partition. Vista works well, that all data on the D partition. I could just format the partition D, but the problem, is that the titled HDD recovery folder is stored on the D partition. Back in 2009 when I bought my laptop, I created the HDD Recovery DVD s by following the instructions. I could use and format the entire hard drive, but the information that I got from tech support in my country told me that the new record of recovery disc HARD would not be created.

  I want to just wipe the drive and do a fresh install with new file recovery HARD drive on the drive D partition, in short: right now. Is it possible or not?

  > Is it possible to perform software factory default recovery or recovery of State out-of-box for my laptop Satellite P300-1GQ?

  It is possible:
  In doing a recovery of HARD drive or using the recovery disk

  As far as I know using the recovery disk disk HARD integer could be formatted and create return to the same State as at the first day of the purchase, it would mean that the folder of HARD disk recovery and HARD drive recovery option should be available even if you use the recovery disk!

• Satellite L655 - recover Toshiba Recovery option

  Hello

  I have a Toshiba Satellite L655 with Windows Home Premium 64-bit. I recently had problems with my operating system. Unfortunately, I didn't know about HARD drive recovery option, so I just reinstalled an OS with Windows 7 installation CD (I have a).

  Now I know about HARD drive recovery and I would get my system to it's State of origin "Toshiba", but there is nothing "Toshiba HDD recovery" more in the recovery menu (F8 at startup)

  I still have the folder HDDRecovery on my drive D:\ with od 7.5 GB data. But how can I get it back? What should I install to have the "Toshiba Recovery" point back again in the recovery environment?

  Thank you
  Ivan

  Hey Buddy,

  The Toshiba HDD Recovery feature is available on the preinstalled operating system. If you have installed another version he s not available anymore.

  So in your case, you have the Toshiba Recovery disk to restore to factory settings. Did you create the Toshiba Recovery disk before installing Windows 7?
  Usually this can be done with the box settings because the Toshiba recovery media creator is preinstalled. This means that you need some blank discs to create the recovery disk.

  If you don t have the recovery disc, you can order a new by clicking here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Re: HARD drive recovery does not work

  Dear Toshiba

  my laptop in brick and now I got

  during the restoration that he bricked once again and now it is not a choice of the repair of your computer in the F8 boot more

  How can I start the hard drive recovery now?

  If the option is not available then HARD drive recovery option is screwed to the top.
  You have created recovery DVD Toshiba recommendation?
  If Yes use this disk for the installation of the OS.

• F8 - HARD drive recovery procedure, cannot open a session

  Im trying to start the HARD drive retrieve using this tutorial:

  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  and uptill now ive never been able to take the selection of keyboard layout that my hard drive is not proeprly work but finally ive today managed to cross twice in a row, but instead of a log on screen as the tutorialshows, I get a box with a red and white circle X, he says something in sense of I need to log in before I can use this feature and communicate with my administration system Press ok to restart. So, how can I do so im automatically logged until I reached this point is there anything I can do in the bios I can access only no problems without it crashing.

  Thnx, Ross

  All the HARD drive recovery procedure has nothing to do with the BIOS.

  Your story is quite confusing and I don t understand this with red and white circle X.
  I made repeated several times and have never seen anything like it.
  I can imagine that recovery image is missing, and as a result, you get this message.

  Can you please tell me on which stage you have problems? Maybe you can take a picture?

  Just click NEXT in step 2.
  To step 3 remember your username is just a (the same as the Windows logon). If you use the password put it there but otherwise just leave it blank and click NEXT.

• Satellite A500-1CO - HARD drive recovery problem

  I have a PC laptop toshiba Satellite A500-1CO.
  Previously, when I wanted to again pour Windows
  Recovery program HARD drive that I used

  But now I delete d:\HDDRecovery folder and when I run the HARD drive recovery program a mistake with this article shows you:

  Folder HDDRECOVERY not found in d: \.

  Excuse me for my bad English

  Hello

  > But now when I run my program of recovery of HARD drive
  > An error with this article shows:
  > Folder HDDRECOVERY not found in d: \.

  Have you checked if the folder in hard drive recovery leaves the local d? Perhaps, you have removed before...

• Re: No HARD drive recovery on Satellite S995D-S5374 area

  I can't do a recovery disc, it says that there is no HDD Recovery area.

  The situation was like that, I wanted to decrease the size of the C drive. I did it with a program and then windows could not start and went to do so more and more.

  I used a different windows installation disc 8. I used the reset option. And the computer started as if it was just a box, the only difference was that my files were intact and also my account on win8. Although scores are one in trouble.

  Now, it looks like this:

  https://fbcdn-sphotos-a-a.akamaihd.NET/hphotos-AK-AsH4/485244_553699437987988_1572844514_n.jpg
  https://fbcdn-sphotos-g-a.akamaihd.NET/hphotos-AK-AsH3/537768_553699434654655_840557981_n.jpg

  I can not access the half of my hard disk space. There is recovery partition as you can see, but I can not burn a recovery disk...

  I tried to do what he says here (opening the HARD drive recovery process), but it failed. I get the screen where it says
  my pc need to be repaired and nothing was found or can not be found to achieve this.

  Yes, guyes, * please help *. I want my rear disc space and if it is possible to make a recovery disk. As I can access the recovery partition in my computer, can't do a drive recovery here?

  p.s. in disk management, when I right click on the partition "Data", it is said that 'Help' and nothing more.

  p.p.s. I Satellite S995D-S5374. And there was no disk recovery with it when I bought it.

  In recent years, Toshiba doesn't offer recovery discs with new models of laptops with recovery media must be created by the owner of the laptop. It is clearly described in the document s user manuals.

  Recovery media can be created if the laptop has only factory settings. As I see that you have changed the structure of the partitions and that was the big mistake. Of course you can do, but at the first recovery media must be created.

  Please read the last post on http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=140985

  Sorry, but now you cannot create recovery media or start HARD recovery disk image installation.
  If you want to have the recovery disk and use it to recovery image installation, you need to order a new drive for https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.