Satellite A500 - some drivers works only on Windows 7

Similar Questions

• 3.o Ralink bluetooth drivers works only on windows 8

  My bluetooth motorola 3.0 does not work in windows 8, it was installed in my laptop TX hp2018. I tried all the drivers available, but they did not work in compatibility mode for windows 7 also. Windows community demonstrated that it is compatible with windows 8.

  Hi Ashutosh,

  HP has not released drivers Ralink Motorola Bluetooth 3.0 for Windows8. According to HP, you will need to wait until Windows 8 compatible drivers for Ralink Motorola Bluetooth 3.0 are available.

  You can check the link HP forums at the address below for reference: http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking-e-g-Windows-8/Ralink-Motorola-Bluetooth-3-0-HS-Driver-not-compatible-with/td-p/2157795

  As a work around you, try to follow the advice given by Sankara SubramanianGiri published on May 12.2013. Consult the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/ralinkmotorola-BC8-Bluetooth-30-HS-adapter-not/2353f021-3756-49D4-8654-a8e409a13b17?page=1&TM=1376540074991

  It will be useful.

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• Satellite A500-19W - where can I find Windows 7 32-bit drivers?

  I had a Satellite A500-19w. I want to install Windows 7 32 bit, but I can't find any driver.
  Please help me find the drivers.

  Hello

  I checked the Toshiba website, but unfortunately, it seems that there is no driver for Windows 7 32 bit, only for Windows 7 64-bit.

  But have you tried the 32 bit drivers for Vista? Normally, most of them should work.
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check it!

• On Windows 7 Satellite L300 Vista drivers works

  I'm guessing that the answer is 'yes', but all the Vista drivers work on Windows 7 (clean install) - for example I speak for the silent acoustic version 2.02.01 & 2.02.03 for Satelitte L300?

  Not all do the job, but most of them ;)
  I worked m not a L300 owner but tried to install some other Vista on Windows 7 and not all drivers
  But I guess you will have to test it yourself.

• Satellite A500-1GL - alternative operating system to Windows 7?

  If someone managed to use a different operating system of Windows on this laptop? I have a dual boot with Windows XP and 7 (I have a few games that won't play on Windows 7).

  I realize that there may be some problems with some drivers, but as long as I have enough material to work to play the games doesn't bother me if some bits do not work!

  In general, you can install any system you want, but the problem is drivers. I have a500 also and wanted to run Windows xp but cannot find any drivers for it. It was about 7 mounts there and maybe they are already out :), did not check.
  You can get the drivers on the sites of sellers and but some Toshiba utilities do not work. One more thing, he takes the sata drivers to install Win Xp or choose compatibility mode in the Bios...

• Touchscreen driver works only under Windows 8

  Install Windows 8 on HP Touchsmart 520 is really a nightmare. Usually, the display driver installation procedure and Voltron Touchscreen product error 9998 drivers. Oddly, I managed to somehow work around this by using a different display driver (some beta-version of Intel), but it was buggy. Since the reinstallation of Win 8 I can't to install more touch screen driver. Given that the Touchsmart series sells on its touchscreen capabilities and given the fact that HP relies on the Microsoft OS is not only slightly irritating that HP has so far not been able to provide drivers of devices that work well with Win 8 Release Preview. What solution do you offer me? Wait? Back to Win 7?

  The pilot (Nextwindow Voltron Touchscreen) updates automatically after the installation of Win 8 RTM when you only run Windows Update routine. At least in my case it did, and it works fine.

  HP Touchsmart 520, win 8 RTM x 64 Pro (Volume, active key by the KMS server; in the case that sounds Chinese to you: ask Uncle Google; this German page has all the information you need: http://www.boerse.bz/hard-software/microsoft/windows-8/1168581-windows-8-rtm-final-build-9200-informationen-und-diskussion.html).

• Satellite A500 - how to reinstall the original Windows 7?

  Hello

  I bought the Toshiba Satellite A500-19U and Windows 7. I tried to create a new partition, then I've done assets so he hid, after restarting the laptop, I had a black screen and massage (bootmgr is missing)

  So I installed another copy of Windows 7 just to connect to my computer. Then after the copy of Windows 7 installation I made inactive D if it appeared there is file recovery. So my question is: as long as I have this file I want to reinstall the original Windows 7 I have in the drive hard, but how?

  When I press F and repair, then it does not give the last option of HARD drive recovery! Why and I have the recovery file?

  Please help me

  Hello

  I guess you didn't read the manual user, first of all. I m right? ;)

  Well, normally HARD drive recovery you can start if you go into the advanced boot menu (F8) and select Repair my computer. After that, you can choose the option of HARD drive recovery.

  But I guess that this isn't possible anymore because you have installed another copy of Windows 7. If this menu isn't available anymore.

  The only option to restore factory settings using the Toshiba recovery disc. Did you create it? This can be through with preinstalled creative drive recovery Toshiba but if you didn t create it, it s too late now, too.

  The only option now is to order a new drive Toshiba Recovery directly. So take a look in your user manual.

• Satellite Pro 4200 drivers and utilities for Windows 2000

  Hello

  Recently, I decided to upgrade the OS on my satellite pro 4200 to Windows 2000, it was previously under Windows 98.

  After the installation of Win 2000, many components are missing or not working not properly (display, missing utilities, etc.). I couldn't find the Win 2000 drivers in your download section.

  Could you please help me?... is there any service pack with all the win 2000 drivers and utilities of this model? Where can I download from?

  Thank you very much

  Hello

  Littco said, all the drivers are on the Web site.
  In addition, check if you can install a driver that was designed for ie Win NT or Win Xp. sometimes, these drivers work on W2k operating system.

  Good bye

• Folio 9470 m: Broadband Mobile (un2430) works only with Windows 10 on Folio 9470 m

  I had 10 Windows installed on my HP Folio 9470 m since October last year (Insider program).

  One thing I've never been able to get to work is the mobile device to broadband (un2430). It simply says "Radio off". All attempts to re - install the driver (which shows that 'work'), toggle the device etc. etc. just leads to the same result, that "Radio is off".

  I Googled it a couple of times and found that other users have the same problem. Also his colleagues of mine with the same model also has the same problem. It works very well under Windows 8.1.

  Does anyone have a work around?

  I was really disappointed when W10 has been released as HP not updated the drivers page W10 drivers:

  http://h20566.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5271102

  How can I know when / if HP released W10 pilots, including support for mobile broadband, for the HP Folio 9470 m?

  Not that HP has released some drivers for the Folio 9470 m and 10 Windows, I decided to do an installation from scratch and using these drivers. Unfortunately there is no driver for the un2430 and I still couldn't run.

  But then I found this solution of colleagues HP user jamie76 and it actually worked!

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Sierra-Wireless-WWAN-module/m-p/5242367

  I thank this guy from the bottom of my heart, and if you have a Folio 9470 m, this is how make you the WWAN work in Windows 10:

  1. Uninstall HP un2430 Sierra Wireless Drivers in the Control Panel - programs and features. If you have an it.

  2. restart your machine.

  3. stop and try again.

  4. start install hp un2430 Sierra Wireless Driver sp63218 go 8460p Windows 8.1hp support and drivers. Approximately 77MB in size.

  5 restart.

  6. Finally, as additional installation, sp63221 approximately 115 MB. Sierra Wireless Driver. Hp support and drivers of a CURRENT laptop called OS Windows 8.1 turn G1 EliteBook.

  7. the cellular signal should appear in the taskbar.

• Intel Wimax 5350 works only with windows 7/t400

  As someone who uses the Server 2008 on my desktop, when I received my t400 a few days ago I hesitated at the idea of using vista.  so I decided to download and install windows 7 64-bit (Vista 32 bit... I did an install own good... I think).  I haven't heard of anyone having problems with the drivers wireless in windows 7 and, indeed, intel States on their site that windows 7 will automatically install the drivers for the card 5350 wireless.

  Unfortunately, during the installation of windows 7 was complete the drivers were not installed and I don't have access to the internet.  I therefore had to take my Office Wireless usb adapter, then plug it to access the internet.  Windows Update has not fixed the problem.  so I installed the visa of intel 64-bit drivers and windows told me that my wimax device has been recognized, the drivers have been installed, etc.

  except the wireless card still does not work!  He is currently under listening network cards as area network/2 connection cable unplugged/intel wimax link 5350.  I do not understand... should not it listed as being a wireless network connect as is my usb adapter?

  I think that the problem might be that in Device Manager, I don't have a driver for the controller network, serial port pci or pci simple communications controller.

  It is quite frustrating and I really regret not putting more thought in this installation of windows 7.

  Thanks for the help

  I have a T400 with 5350 Intel and Windows 7 x 64, I downloaded and installed the

  Intel PRO / Wireless and WiFi Link drivers only for Windows Vista * (3298 KB) and the

  Intel® utility connection WiMAX PROSet/Wireless for Windows Vista * 64-bit (9206KB) from the Web site below.

  http://Downloadcenter.Intel.com

  Furthermore, my "Intel(r) WiFi Link 5350' and ' Intel WiMAX Link 5350" listed in the "Network adapters" category, I have not any category 'Wireless Network Connect' at all. "

  I hope this helps!

• SENTINEL HASP KEYS 3.25 WORKS ONLY WITH WINDOWS 7

  I lived several of these posts here about the hasp and windows keys 7 and I tried many suggested fixes, but nothing works. I installed the software using Windows XP Mode in Virtual PC, I've updated, uninstalled drivers, reinstalled with and without the hasp key inserted. I use the Sigmanest V4, Mastercam9, and Mastercam10 software. All three of these programs worked fine with Windows XP service Pack 3. I did everything that I mentioned above and some of which you try to run the software in compatibility mode. Nothing I try works, Sigmanest software seems like it is recognizing the hasp key because it will be open, but it will not open in demo mode. The two programs Mastercam do not even recognize the hasp key. They open up and say that there is no present hasp key, then close. After years that Windows 7 has been out someone got a solution for this. Maybe they have, but I can't?

  Hello Chad,

  Thanks for posting your query on Microsoft Community forum.

  According to the description of your problem, it seems that you are trying to install the drivers for the Sentinel 3.25 HASP key. I checked the official site, it shows drivers for Windows, but did not mention the version of Windows.

  Here is the link: http://sentinelcustomer.safenet-inc.com/sentineldownloads/?s=&c=End+User&p=HASP+HL&o=Windows&t=Runtime+%26+Device+Driver&l=all#.

  I also checked this device and software Center of Microsoft Compatibility, and I couldn't find any information out there in that regard. So I suggest you to contact technical support SENITEL for troubleshooting further because they are the best people who can say that this device is compatible with Windows 7 or not.

  Hope this information is useful. Do get back to us after contacting them and please update your question on the forum.

  Thank you.

• NETGEAR PTV1000 works only with Windows 8

  I have a new laptop of Windows 8 and I am trying to connect Netgear Push 2 TV adapter (PTV1000) with my active WIDI computer Dell laptop. My laptop detects the card, but when I try to connect I get a message "this device is not compatible with WIDI on Windows 8'. I tried to use the compatibility mode in windows, but it did not work. Please advice if I need to download some drivers from Netgear, or Microsoft and install them to solve my problem.

  Edit:

  NETGEAR Push2TV and Windows 8 - is that someone can give detailed instructions to reinstall the drivers Windows 7 WIDI?

  I used the utility Intel to update the drivers. What the utility does not, it's "downgrade" to Windows 7 driver WIDI. It's a critical process and I don't want to dirty windows drivers. My question is who is the link of the driver Windows & WIDI? If I install the driver Windows 7 WIDI will automatically uninstalling the driver Windows 8 WIDI? What are the sequence of steps to perform. NETGEAR refused to support and was told that PTV1000 is not supported with Windows 8. I think that if technology is not backward compatible then this is the Netgear and poor technology should be more responsible by providing a detailed solution for their product for 8 64-bit Windows.

  What has worked for me, is to install the Intel® PROSet/Wireless WiMAX Connection Utility for Windows 8!  After that, it worked like a charm!

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=21997

• DeskJet 722C works only with Windows 7

  OK, so I applied the DJ_Patch as described. (See http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Deskjet-710-720-810-820-100-Series-prin... ) I have Windows 7, 64-bit and a HP Deskjet 722 C printer.  Tried to print the test page, but received the error from the printer.  Tried to add a printer, you are looking for the 722C, but it is not on the list, even tried to do Windows Update to search for my printer.   Tried to restart, which did not work or the other.  Still get error printer.  I appreciate any other suggestions.  BTW, the printer is connected via a USB to parallel port cable.

  My HP Deskjet 722C now works!  I spent several hours trying different things only to find out it was the cable use to connect the printer to our new computer.  He is there not a lot of info on the package of cable but if you watched closely he said it worked only with Win XP, me and Vista.  Who would have thought that the cable wasn't working with some BONE... me!  Once we went and bought a new cable ($40, Ouch!), we were running a few minutes.  I don't know that a cheaper cable is available online.

  I wanted to post this in the hope of saving someone money, time and frustration on the other.

• HP DV6768se Mini Remote works only on Windows 7!

  Just like the title says, my mini remote control won't work for nothing, I have windows 7 ultimate. I have the ENE CIR Receiver driver installed (41645) and with this driver, the only thing that works is the button to switch to the external display. I tried to change the battery twice (was a 2 Pack of brand new) still nothing. I even tried to change a new driver ENE CIR driver (44983) which is supposed to be for windows 7.but with this driver even not that external display button will work. This remote was working find on windows vista (but everything still sucked him )

  For your model, all you need to do is to install Quick Launch Button software, CIR driver comes into it.

  Uninstall the current ENE CIR driver, and install software QLB, Win7 Upgrade guide, here, your laptop is in level 2.