On Windows 7 Satellite L300 Vista drivers works

Similar Questions

• Satellite L300 - external screen works fine until the Windows login

  Hello world

  I am trying to use an external display with my Toshiba Satellite L300 and it works up until I have to Log in Windows (or in Ubuntu just had the same problem).

  At this point, the laptop does not seem to recognize the external display more and jump using the internal screen again.

  It might be relevant: I'm using dual boot Win XP and Ubuntu Hardy.
  The problem occurs in both systems.

  Someone knows how to fix this?

  user111

  Maybe the resolution is set too high?

  Try a lower resolution and an update of the BIOS.

• HDD Recovery Fail on Satellite L300 Vista

  I'm arrogant and not install virus protection software and eventually get drowned in the spyware rather than go through the hassle of trying to remove each of them so that they slow down the computer to a halt, I decided to restore the factory State.

  It seems easy, but now after the first part (a command window with a percentage) he told me that he had no HARD drive recovery.
  What can I do now that I can't use my computer, I don't have a Vista disc because Toshiba has asserted that I could recover from the hard drive I could use XP if there is no quick fix I have a drive for this, but how easy is it to find and install all the drivers, incidentally It's a Satellite L300.

  I have no idea why the recovery partition does not work that way, while the guys do you recommend I do?

  Thanks, man.

  > It seems easy, but now after the first part (a command window with a percentage) he told me that he had no HARD drive recovery. What can I do now that I can't use my computer, I don't have a Vista disc

  Have you tried to start the HARD drive recovery?
  Simply press the F8 key after laptop powered upwards and choose fix my computer.

  Usually, this will help you start the recovery disk again.

  If this is not possible then you will not be able to recover the laptop without the Toshiba recovery disc.
  He really stupid situation if you didn't create the recovery disk before this problem happened :(

  Well, your last chance would be this site:
  https://backupmedia.Toshiba.EU/landing.aspx

  Here you can order a new Toshiba Vista recovery disk

  Good bye

• Re: Satellite L300 PSLB8: drivers XP need

  Hello

  I bought a Satellite L300 - PSLB8 system unit.
  I installed Windows XP - SP3 top cause I don't like vista.

  Now, I'm looking for the grafic-chipset and the audio chipset or drivers to install the good.
  My Grafic propertie possibility are only 800 X 600 and 1024 X 768.

  -> Other devices Device Manager reports:
  "? video controller.
  "? video controller VGA compatible ".
  "? device modem on high definition audio bus ".
  "? audio device on high definition audio bus ".

  Cant't find drivers for Win - XP.
  It seems that Toshiba encourages only Vista on this laptop
  Help, please!

  Thank you very much
  Cappo

  > Can t find drivers for Win - XP. It seems that Toshiba encourages only Vista on this laptop

  It seems that Toshiba provides drivers for both Windows operating systems and it seems you didn't look good enough, or these drivers

  I found all the XP drivers on the European driver Toshiba page.

  Good bye

• Satellite L300 - Vista downgrade to XP

  Hello

  I bought a Toshiba Satellite L300. I have some programs that do not work under Vista. Can I Downgrade Vista to Windows XP?
  And how can I do?
  Thank you

  Try to set the AHCI in the BIOS mode comatible.
  Then you wouldn't need the SATA driver.

  But usually the Intel Storage Manager should help you too...

  In any case, try to change the settings in the BIOS...

• Re: Satellite L300: Vista demands the keys to the series after update

  I should come to you today because I have a problem with my Toshiba Satellite L300 and I don't know who to go to?

  The problem is:
  I do the update for my laptop last night (January 29, 2010) and now my surprise, my computer asks me to activate my WINDOWS VISTA HOME PREMIUM... thing that I don't understand. Because I have my laptop since November 11, 2008 and I have never had such a problem.

  Hello

  It's really strange since the Toshiba, preinstalled operating system (any OS there is) is already activated and you need t to enter the serial key.
  I m not sure why, but I think that Member States updates affected activation and, therefore, this pop up message.

  In your case, I just only advice;
  I recommend to recover the laptop again, you can use HARD drive recovery option which allows you to reinstall the operating system without the use of any recovery disks

  After the installation of the new operating system, try to update the new Win Vista

  Welcome them

• Satellite L300 - Vista asks me for a key

  I recently bought a Satellite L300-1CU with Windows Vista already installed.

  When I start the programs that they ask me to enter a key, when I entered the 25-character key found on the Windows sticker at the bottom of the computor as computor says it's the wrong key.

  I'm doing something wrong? If not, where can I get the right key of.

  I doubt that Vista asks for a key. I think you mean Microsoft Office, right?

  Well, the button on the underside is for Vista preinstalled, NO Office but normally you can see from the thumbnail (Windows Vista product key)

  On Toshiba laptops there s only one Office pre-installed trial version and if you want the version complete, you must pay for it.

• Satellite L300 - wireless not working do not at all

  Hello world

  IM new here and my name is Jodie. My husband and I bought new computers laptop a few weeks ago, Satellite L300.

  On my husband a wireless just stopped working, the switch is on but no lights appear. I tried FN and F8 says the Wireless does not work. I checked in the device under netwrok Manager cards to see if he said the same thing as mine and the wireless adapter is missing? It's the Atheros AR5007EG wireless Netwrok adapter.

  Can anyone help? Cannot believe what has happened and they are only 2 weeks :(

  Thank you guys
  Jodie

  Hi Jodie!

  Have you tried to update the driver for wireless network? On the Toshiba WLAN portal, you can find the most recent version that should work on your laptop:
  http://APS2.toshiba-tro.de/WLAN/

  I'm not sure, but you should look in the BIOS. Perhaps there is an option if wireless LAN where you can enable or disable WLAN.
  Check it!

  In addition, I recommend also updated the BIOS, and if nothing can help launch you the Toshiba recovery disc. You will receive the factory settings where everything should work fine.

  Good bye

• Error messages when you try to retrieve satellite L300 Vista

  I have a Satellite L300, which keeps freezing upwards so when I tried to do a recovery I got an error message 10 D 045 fa12 and when I tried to completely erase the disk, I got an error of the FFE 20 045D

  This unit was sent to toshiba for repair and technicians said there was nothing wrong with the unit, but my research tells me there is probably a fault requiring the replacement of the HARD drive - so now that my warranty just expired do - what I do? Can I still take the unit for repair since the issue of original warranty has never properly addressed? or is there a way I can fix the error?

  If the warranty has expired, this can be a problem now, but I wonder why you did not react immediately when you saw that there is a problem.
  On this forum, you can find several threads with the same problem and if you have time try to read this that people writing here.

  I can imagine there is problem with HARD drive, the HARD drive can be replaced but you can do it alone.
  It's really not a big deal.

• Satellite A500 - some drivers works only on Windows 7

  I have a new (Dec. 2009) Satellite A500-12W (PSAM3E-00Y00FN5) I updated to Vista 64 bit for Windows 7 64 bit.
  To ensure that I have the latest drivers, I tried to update all the recommended drivers for this model with Windows 7 64 bit to nordic.computers.toshiba - Europe.com.

  However, the Intel chipset utility, nor the ATI display driver managed.

  During the installation of the Intel chipset utility, I get an error message indicating that my system does not meet the minimum requirements. Instead, I was able to install an update from the Download Center INF utility of Intels for my game of chips (Mobile Intel GM45 Express chipset). So my question is, what are the minimum requirements for this Intel chipset utility, or is it not the right one for my laptop?

  The ATI display driver installed itself, however, I get 2 error messages when starting upwards in my event log:
  Source: Atikmdag, event ID 52236, CPLIB general - invalid parameter.
  Source: Atikmdag, event ID 43029, DAL - display is not enabled.

  How can I fix?

  Hello

  First of all, you must update the BIOS!
  There is a new BIOS for the Satellite A500 PSAM3E. This time it s 1.50 - winner

  After the BIOS has been updated, you must use the Chip Set Utility downloaded from the Toshiba European driver page it s a v 9.1.1.1019.

  The latest ATI display driver is 8.634.1.

  Please note that all packages must be unpacked first!
  Don t try to run all the drivers when the package is compressed!

  In addition, you could update the driver in Device Manager.
  Go to Device Manager, mark the device and choose Update driver.
  The first option will update automatically the driver!

  If this will not succeed, you can use the second option that lets your for pointing the driver files downloaded from the Toshiba page.

• Satellite L300 - Vista Home, business and home?

  I have a laptop L300 crashed & I was unable to use the 'restore the computer', so I had someone help me.
  They loaded Vista Business on it (there was Vista home initially).
  The ' reader seems to be affected as I had itunes on it & its still there more HARD drive partition section.

  Anyone know if I should try & use computer restore it works again with the original settings. a professional vista now written on the original vista?

  Let me know if I need to provide more information.

  > Is - anyone know if I should try & use computer restore it works again with the original settings. a professional vista now written on the original vista?

  I assume you mean on the restoration of windows own system that would set the OS to the previous time point
  No, you will not be able to use the original settings.

  If you want to use the laptop with the factory settings, you will need to use the Toshiba recovery disc!
  The recovery disk would be to format the whole HARD drive and would all set to the same State as on the first day of purchase.

  Good bye

• Satellite L300: Vista complains that I don't have a genuine license

  Hello

  I recently installed a new hard drive in my laptop Toshiba L300 the previous died.

  I tried using the recovery disk and it ended fine,.
  However when Vista loads to the top it complains that I do not have a genuine license and wil allows me not, log.

  It allows only the possibility to buy a license.

  Has anyone encountered this before? and can provide me with any assistance.

  Thank you.

  Hello

  Dull strange thing. Did you really use the Toshiba Recovery disk?
  I mean the image of Toshiba on the Toshiba Recovery disk is already enabled and you need t to enter the serial key to activate the Vista operating system.

  You should also know that the serial key which is placed at the bottom of the device will not work with a genuine version of Microsoft Vista.
  This is an OEM key that belongs to tot eh Vista preinstalled Toshiba!

• Satellite L300 - Vista - Touchpad and USB mouse does not.

  Hello

  Well well after hours of trying allsorts, I post here...

  Been given the laptop for repair as the touchpad no longer. No problem "I thought", simply plug a mouse usb to help me get around and re - install the touchpad... what a joke.

  On the right, the USB mouse is recognized as a hid device and work, according to the Manager of devices, but not when you move it... nothing...
  The Touchpad is listed as a Synaptics ps/2 touchpad and signals a Code 10 in section mouse device as well as listed as a hid and fully functional usb mouse Manager.

  Right... I have...
  Listed all devices, even the hidden nonpresent (devmgr_show_nonpresent_devices) and removed everything only account of any mouse, keyboards, etc...
  uninstalled the software synaptics via the program Panel.
  Restarted the laptop, and it starts with the touchpad is ranked again code 10 with the version of windows drivers.
  Drivers up to date using two different files of Toshiba for the touchpad, still Code 10
  Still, the USB mouse does not either.

  Someone enlighten me please on a fix for this...

  Hello

  Really strange what s my friend because normally a touchpad driver update should solve the problem.

  In any case, have you ever tried to use the Toshiba Recovery disk? Maybe it s just a software problem and a few important Windows files are destroyed or don t work properly. Reinstall Windows using the recovery disk Toshiba takes only a few minutes and there are already all the drivers and tools integrated. With these parameters (factory settings), the touchpad should work properly, and if not the touchpad or the motherboard needs to be replaced maybe.

  Good bye

• Satellite L300 suddenly stopped working - new motherboard needed

  My L300 Sat suddenly stopped working the other day.

  It kept freezing, then nothing. So I kill disked the HARD drive and tried to re - install Windows (XP).
  During the installation, he threw a message that some internal components had been installed incorrectly and has to be reinstalled.
  I was told to remove the memory cards and reposition the.

  It does not work. I thought that maybe the HARD drive was damaged, so I set up a new and started to reinstall Windows.
  Once again, same message. One of my colleagues at work suggested that the motherboard was probably U/S.

  So I've been trawling .net to find a replacement. Laptop computer out of warranty! I am told that some other mothers numbered series will work with this laptop. I really want to get a motherboard to find sound never go to work! My unit has a number of SPS to: V000138330.
  I am one with an SPS of offered: V000138390.

  Any ideas? This one will work?
  And if this is the case, it will give me the feature I used to enjoy?
  Sorry for the long history of sobbing.

  All the advice accepted with gratitude.

  ANDY-N

  Hello Andy

  Sorry, but can you tell us more about your laptop? What model do you have exactly (L300-xxx)?
  You have the European model?
  At your warranty valid for laptop?
  Maybe I've misunderstood something, but why you want to swap motherboard if the warranty is probably still valid?

• I can't log into Windows on Satellite L300-1BW

  When I try to log on my L300-1bw I get the user name appear but when I enter the password (for the administrator) password is not accepted.
  (The username and password have been defined when the laptop was first pulled up and it was closed and restarted several times satisfactorily).
  I was able to create the recovery disks, but now when I insert in the drive and turn the unit the disc turns but nothing happens.

  Any advice would help

  > User name and password have been set when the laptop was first pulled up and it was closed and restarted several times in a satisfactory manner
  It's strange.
  As far as I know that Windows Vista was preinstalled on a new laptop but the user account and a password shouldn't be standing!

  Have you tried Notepad recovery using the HDD recovery procedure?
  Check it;
  Turn on the laptop and immediately press the F8 key.
  A start menu should appear, then you should choose the first option called fix my computer.
  Finally a new window should open, and you should choose Toshiba recovery.

  Please check this box.