Satellite A60-174: system32\drivers\isapnp.sys error

Hello
After several nights and using Recovery CD e try my Satellite A60 will not work. Even though I cleaned it and cables everything is new.
I got this error: system32\drivers\isapnp.sys

I installed the HDD in another laptop and works very well. If I bring the disk for Satellite A60 I still get this error.

OR Toshi stays to the debugger DLL when I try to install another version of win XP Pro.

I think that the RAM or something in the motherboard is broken. Can I change the RAM from the motherboard?
It would help if I add little ram additional RAM slot?
(I use only the RAM stock because it is on the motherboard.
any idea what may be this system32\drivers\isapnp.sys.

It is said to start the laptop with Win XP cd original and try with a R.
Well, this back do NOT work in this laptop.
I can't come to the screen of Windows XP. The laptop will break the instalation before that!

Konstantin

Hello

See this Microsoft Knowledge base article:
http://support.Microsoft.com/?kbid=315311

I also read that if the new facility does not resolve the isapnp.sys question then maybe it is a failure of module memory.
Try to remove the module and test it with another.

Check this similar subject announcement:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=11602&MessageID=52873

Tags: Toshiba

Similar Questions

  • xp\system32\drivers\isapnp.sys Windows 7 Code

    original title: windows xp\system32\drivers\isapnp.sys

    I have Windows XP and it won't start.  I do not have the recovery disk and I get this error message system32\drivers\isapnp.sys and I get code 7.  What can I do about it?

    Hello

    This problem may occur if the Isapnp.sys file is damaged or is not present in the path that specifies the error message. You need Windows XP installation CD to replace this file. Refer to the article below for the procedure.

    You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup
    http://support.Microsoft.com/kb/315311

    I hope this helps.

  • multi (0) disk (0) rdisk (0) partition (2) \WINDOWS\system32\DRIVERS\isapnp.sys

    My laptop does not start correctly.

    In a normal boot, the screen flashes the dell logo then turns off.

    It will start using the f12 key for a menu that gives the following options: drive HARD internal, CD/DVD/CD-RW drive, configuration of the BIOS, Diagnostics

    OR to the Windows Advanced Options Menu:

    If I select Safe mode it tries to start then stalls on which seems to be to halfway through the config/sys.  The last element that appears is:

    multi (0) disk (0) rdisk (0) partition (2) \WINDOWS\system32\DRIVERS\isapnp.sys

    I can hear the fan, ect always on and the screen is black with half of it filled with data as above and the but no activity.

    OK, when I run the "diagnosis" in the dell boot menu, it passes all the tests.  At the end a popup appears: "Dell Diagnostic Utility Partition boot" "Press any key to continue."  When I press on it all disappears them text and I get the blue screen.

    I'm online on my desktop now if I can respond immediately.  Thanks in advance for any help

    Maybe one day the "ask a question " of forums XP dialog box will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

    Please provide additional information on your system:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a CD/DVD drive work?

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    This symptom often means that your system is of a malicious software.

    If you choose to start safe mode, and the last thing you see on the screen looks like this:

    multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\system32\DRIVERS\isapnp.sys

    If your system hangs in Mode safe on the isapnp.sys file, you will need to search for a driver of zero-byte length file in the following folder:

    c:\Windows\System32\Drivers

    Of course, you have to boot the system on something in order to access the hard drive to find the suspicious file and get rid of it.

    If you have any installation CD bootable XP real where you start in the XP Recovery Console, or you are not sure what type of bootable CD, you have, make a CD of bootable XP or Hiren Boot CD Recovery Console and do not forget.

    There is no XP media needed to make a Hiren Boot CD or a bootable XP Recovery Console.  Then you can access the folder and check to see if there is such a suspicious file and take action.

    Once you're booted to the CD of your choice, navigate to the following folder (assuming that XP is installed on your C volume):

    c:\Windows\System32\Drivers

    Looking for a file that ends with an extension .sys and zero bytes in length.  The file can also have a curious name because she may have been generated at random.

    If you are in the XP Recovery Console, issue the following command in the c:\windows\system32\drivers folder:

    dir *.sys

    Files Scrolls one screen at a time.  Look at the list of files with .sys extensions and their lengths.  You don't need to worry about directories...  If you see a file with a .sys extension which is zero byte, it is suspect.

    If you use the Mini Mode XP a Hiren s boot CD (which works as Office XP), just navigate to the folder of the my computer desktop icon and locates the suspect files.

    You really want to delete the suspicious file once you get running and you run some scans for malware, but if you are not sure what is the suspicious file, or if it might be necessary, just rename the suspicious file for now, in case you are not sure.

    For example, if you find zigxrtml.sys folder had a length of zero byte, rename it:

    Rename zigxrtml.sys zigxrtml.bad

    Renaming or removing the suspicious file to get the system running is not resolved the problem.  It is the symptom of the problem.

    The problem is your system is infected by malicious software and you should always follow up with a few scans to remove infections.

    Once your system is running, followed with MBAM and SAS to be sure that the affliction has really been removed.

    Reduce the risk of malware by running some scans.

    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.

    Do, or do not. There is no test.

    I decided to implement the points for a new puppy instead of a pony!

  • BSOD, c:\windows\system32\drivers\mrxdav.sys error?

    I am a veterinary technician, not a computer tech, so I'm out of my depth on this and need help, because these computers are essential for the work I do.

    I work with two laptops, Dell Latitude D600 (I know, I know - they're old.) New ones have been approved as soon as budget free of the order).  Specifications are the following:

    1.60 Ghz processor; 27 GB hard drive; 599 Mhz, 256 MB of RAM, running Windows XP Pro w/Service Pk 3

    We use one of the cell phones as our main unit and the other is our backup.  About 3 weeks, our main unit suddenly came with the BSOD on boot-up top, with the following error message:

    C:\windows\system32\drivers\mrxdav.sys

    The driver unloaded without cancelling pending operations.

    We had not added anything to the extent of the software or hardware is concerned and had not changed anything except for the addition of new text files through an application that we run.  A opted for our backup laptop and who ran very well for the last few weeks, but now we get the same BSOD and error on this unit as well.  I was able to get the machine backup at startup and function normally after about 100 restarts the other day, and he ran all day with no problems once that it loaded everything.

    How do we get this straightened out? We do not have a computer scientist - just a couple of people who know a little more to turn on a computer/turn off.  I ran a clean-up/management application (I-Obit AdvancedCare) for cleaning the registry errors, etc., but that has not solved the problem.

    The error message indicates an infection, but because you have scanned, it is more likely that the portable master knows hardware problems and/or the operating system is corrupt. If you are Imaging for the second laptop, that explains why you see the same questions about this. Best free now part of budget money.

    http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

    Start with the RAM and then make the hard drive.

    If good test material, back up your data if necessary and do a clean install of Windows.

    MS - MVP - Elephant Boy computers - don't panic!

  • Satellite A100 - c:\windows\system32\drivers\sptd.sys blue screen error

    Hello

    Hoping someone can help with this.

    I have a Toshiba A100 with Windows XP Media Center Edition 2005.

    When I try to start my computer, I get a message saying that windows did not start successfully.
    I gives me the options of:
    Safe mode
    Safe mode with networking
    Safe mode with command prompt
    Last good known Configuration
    Start Windows normally

    None of these options works. When I try Safe Mode, I get the following message:

    multi (0) disk (0) rdisk (0) partition\Windows\system32. .. .etc

    This message is repeated over and over again very fast, each time with a different .sys file at the end. Then I get this message:

    Press ESC to stop loading c:\windows\system32\drivers\sptd.sys...
    If I press ESC, I get the following blue screen:

    A problem has been detected and Windows has shut down to prevent damage to your computer.
    The problem seems to be caused by the following file: c:\windows\system32\drivers\sptd.sys
    The driver mistakenly marked a part of his image pagable instead of nonpagable.

    I don't know what except using the product recovery CD and fitness in shape, but I can't afford to lose some of the data on my computer, and this would erase everything.

    Has anyone had experience with this? Any advice?

    It would be much appreciated.

    Hello

    Seems the OS or the partition where the operating system has been installed, is corrupted.
    I don't know why this happened, but there are different reasons for this

    In any case, I think that you have no choice as to reinstall the OS using the recovery disk.

    You want to get access to the data on the HARD drive?
    Well, you could remove the laptop HARD drive and it could connect as an external USB device to another computer. Then, you should try to copy the data to another HARD disk.

    Who could help

  • system32\DRIVERS\pci.sys missing or corrupt file error but windows xp is already preloaded on computer when purchased

    missing or corrupt file error system32\DRIVERS\pci.sys keeps appearing. I had a problem with google chrome and then stop everything. This error appeared. It tells me to use the cr rom boot but xp was already loaded on the sony vaio that we bought a few years ago. I don't know what to do next because I don't want to lose the pictures and music, we have on the hard drive. Any help would be appreciated

    If your data is not backed up, then at some point that the data will be lost.

    Your Sony are delivered with a hidden restore partition or recovery disks, but I do not think that the Sony recovery allows to repair an installation of win, only pure install.

    You must remove the drive and it slave on another PC in order to retrieve the data, or take it to a decent repair shop for them to do it for you

  • Error message on my Vista computer: missing or damaged file: C:/windows/system32/drivers/ATAPI.sys. (Status: OXC0000098). NO RECOVERY DISK! (lost).

    Missing or damaged file: C:/windows/system32/drivers/ATAPI.sys. (Status: OXC0000098). NO RECOVERY DISK! (lost). How can I recover my system, if possible? It does not even start.

    Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

    If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  The Startup Repair tool can repair atapt.sys.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

    If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

    If this does not work, try to start in safe mode (click on the F8 key during startup and go into safe mode with network - or using the prompt from the disk, if necessary, several times).  Then we will check some of your system files:

    Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator (skip thiis step if you use the disk)...

    Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  In a best-case scenario, he'll fix Atapi.sys.

    While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

    If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / event viewer - type eventvwr and enter, if do it from the command prompt).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

    I hope this helps.  Post back the results of the analysis and attempts to repair if these do not work.

    Good luck! Lorien - a - MCSE/MCSA/network + / A +.

  • Error - EPPkt.sys and c:\windows\system32\drivers\afw.sys not found and fix crashes in Windows XP Pro computer.

    Original title: during repair XP Pro from the disk installation, everything crashes.

    I am writing this plea on my desktop, pc Win 7 it. The pc is older and elsewhere in the House.

    Due to the white/white space in Add/Remove Programs, after checking the extent of possible for viruses, corruption Reg, etc., the advice of consensus was to reinstall the Windows, using the disc (this XP Pro was on the HARD drive when I got the pc - new to 2009 - and I did the back-up recommended/controlled , and that's what I was doing Rcounter Set up, around 1700 BST.

    Everything seemed to go OK, but black screen of Windows is now the small hourglass circulating and 'Please wait '.  The HARD drive is flickering, but it's been more than 3 hours!

    My second pc was rotten, and I had to reinstall or repair XP Home [disk] a few times. It is only 35 GB, compared to more than 100 on the pc in question - but I've never met before delay.

    Installation messages were as follows:

    EPPkt.sys and c:\windows\system32\drivers\afw.sys not found.  I checked this point, and it should not have caused any problems. It has also sought a labeled disc 'Machine Virtual Network Services', which no doubt, since I did not, was never necessary.

    I'll leave it on - but...

    Help, please!

    Well, I had to bow to the inevitable. Please accept this response as a ' I've been there - it could happen to you. "

    I spoke to BT [they provide my broadband] and the helpful guy asked me to look at the installation and reinstall in a different place. It's OK, but [, BUT] some of the drivers have been zapped in eternity. PCI, sounds, videos. The guy thought BT that these had been modified or replaced since the beginning, whereas they were not available. The XP Prof is on the pc when I got it, but I assumed that the pilots were on the backup disk, I did. No, they were not. And how to go online to search for them if we could not put in place the ethernet connection?
    So, I bought Win - 7 it 32-bit full ed. [be too afraid to try an upgrade].

    It could have been a response in the migration of these from other drivers, but I guess it was time to go.

    As I can't afford to buy new COREL, MS Word, etc, I have installed free VMWare player as a host for my older progs in a virtual environment.

    Another thing came out of this: although what remained of XP has been saved by 7 as WINDOWS.old, I am very happy that I had a HDD eternal with ntfs to preserve my files and installable 3rd party progs.

    I hope this might help someone - thanks for the info.

  • error system32\drivers\fastfat.sys when you try to start windows xp

    I've upgraded to a new laptop with windows 7 and had to get some files off my old Acer laptop which has windows XP is installed. It won't start windows now and I get a "windows is not start because the following file is missing or damaged:

    System32\Drivers\Fastfat.sys
    I don't have the original Windows disc as it was an OEM laptop, I have not either the recovery discs. Can anyone help?

    If you can remove the drive of your laptop then this adapter you can connect it to your computer as an external USB drive: http://www.newegg.com/Product/Product.aspx?Item=N82E16812156102

    J W Stuart: http://www.pagestart.com

  • Windows Boot Manager error file:\windows\system32\drivers\ksecdd.sys

    Please can you help with the problem mentioned above, on 15/08/2010, my mother downloaded vista was last updated. While playing freecell or solitaire yesterday (16/08/2010) its system crashed, I did a check of memory and there are no problems reported, so did a restart and it crashed again, he suggested a Startup Repair I did, but Vista could not solve the problem. The Windows Boot Manager screen is the next...

    File:\windows\system32\drivers\ksecdd.sys

    Status: 0xc0000221

    Pease help you because she really expects me to solve this problem during the night...

    OK I'm studying for my M.C.D.S.T for the moment, but it takes time to go through it all.

    Hello

    You do not have CD on C: - to replace a disc it just type C: and press enter
    CD, it's how you maneuver around a player, once you're on it. Saute in X: you would
    It just type X: and press ENTER.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Windows didn't start because System32\Drivers\Ntfs.sys is missing

    Windows did not start because System32\Drivers\Ntfs.sys is missing or damaged.

    In fact, I tried the Installation Windows XP Home with the Recovery DVD - ROM product.

    After formatting it says: out of dvd, then press ctrl_alt_del

    Then appears the error with a missing or damaged file. (infact in German, because I install in German)

    Hello

    I studied a bit in the web and the question could be a malfunction of the memory module. I recommend checking out the RAM modules.

  • Satellite A60-174: USB does not work

    Hello I do not know if this message correctly this time... and I first apologise for my bad English speaking please.

    I just bought a second hand Satellite A60-174 (without installation CD). It has been completely formatted and installed again before the sale, but bad (some drivers were missing).

    I now have a problem of USB ports. Do not connect devices such as a mouse or even a 'simple' external HARD drive, but to connect to another external HARD, a multimedia disc: TVIX 3000 and a tablet/hub USB (powered by USB labtop) ventilation.
    I tried an update for the drivers of USB ports, whenever I am asked to give a CD, no update via windows update (when I configured correctly update windows in system properties).

    I see in the control panel:
    -PCI to USB host controller standard scope
    -OpenHCD... two USB host controller standard

    But after executing "Myconfig.com" gives the results
    -ATI techn... Inc.: OHCI USB Controller #1 and #2
    -ATI Tech... Inc.: EHCI USB controller
    -ATI Tech... Inc.: SMBus

    Why this difference?

    Don't you think that it is the motherboard driver? If so is it possible to update it without having to format and reinstall everything?

    In the list of drivers for the A60 (PSA60E) it is controller EHCI driver, or driver of motherboard.

    Thanks a lot for the other answers youy

    PS Some useful information:
    Operating system XP Pro SP3
    BIOS version 1.70
    SMBios version 2.3 (?)
    Chipset North bridge ATI Radeon 7000IGP
    Bridge South ATI IXP 200

    Post edited by: anne34

    Hello!

    Do you have the yellow marks in Device Manager?

    On the Toshiba site is the order of installation, drivers must be installed in step by step. I think that the display driver contains the driver for the motherboard. If you need to install these drivers.

    And Yes, the information in the Device Manager and myconfig.com are the same.

    I think that there are one or more missing driver. To verify the installation if instructions you have installed all the drivers.

    Good bye

  • Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

    I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

    Windows could not start because the following file is missing or damaged;

    System32\Drivers\Ntfs.sys

    You can try to repair this file by starting Windows Setup using the original Setup CD

    Select 'r' in the first screen to start repair.

    Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

    1: C:\WINDOWS

    Which Windows installation you want to connect?

    (to cancel, press enter)

    What do I put here?

    You must first start on doing something so USB drive a bootable Hiren.

    Here's how:

    I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

    It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

    You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

    You can easily copy your personal data (documents, pictures, music) to an external drive.

    A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
    http://www.hirensbootcd.org/download/    (look to the bottom of the page).

    Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

    Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

    Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

    http://Rufus.AKEO.IE/

    I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

    Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

    Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

    When RUFUS is finished, it will say "DONE" at the bottom.

    Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

    When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

    Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

    A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

    Sometimes that works, then you can also click on start, run and in the type box:

    cmd

    Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

    CHKDSK c: /r

    This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.

  • Cannot create the C:\WINDOWS\system32\drivers\drive.sys file

    Cannot create the file 'C:\WINDOWS\system32\drivers\drive.sys '. The process cannot access the file because it is being used by another process.

    I get this error message all the time on my desk. No matter what I do, internet research, watch videos, listen to music, work offline, it does not apply to just be online. I really want to know how to solve this problem, I searched everywhere I could, and I can't find again no anwer. Please reply and if you want more information, then I'll be happy to provide.
    Thanks for your time.

    Hello

    I suggest you to follow these steps and check if that helps:

    Method 1:
    Start the computer in safe mode and check if the same problem occurs:
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Method 2:
    Try to perform the clean boot and check if it helps:
    http://support.Microsoft.com/kb/929135

    NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

    It will be useful.

  • Vista saying, missing/corrupted, \windows\system32\drivers\oduzt.sys

    Hey guys, I have more solutions for the time and thought that I have turned to a group instead of address on mine.

    When the problem started?

    This morning, so a few hours there.

    What have you tried to fix it?

    Restore Vista CD

    What is the error message (all)?

    Says, the file: \Windows\System32\Drivers\oduzt.sys
    Situation: 0xc0000225
    Info: Windows could not load a critical system driver is missing or corrupt

    I've never heard of this file...

    What was the last thing you did before the problem started?

    Tried to delete/remove virus and malware
    Malwarebytes
    used, Microsoft's malicious remover<-- from="" microsoft="">
    the Microsoft file was the last thing I used before that happened.
    literally on reboot has happened.

    What are your system specs?
    Vista sp1 home
    Laptop Gateway
    Guessing 32bits
    Model no: MA7
    Model mt6840
    I'll tell you more if I could pull up? I can access the recovery cd cmd there at - it a command that will show?

    Do you have a screenshot?
    a little... haha taken with a camera...

    Also I was wondering... is there a way I can run a partition to say windows XP and take all the files off your computer and save them.

    then if it comes down to it, I can just empty the computer and install vista?

    Hello

    You can back up your data is to put the drive in another computer as a 2nd car or
    in an external USB enclosure. Both methods would allow you to save the data in removable
    readers of media such as CD, DVD or USB.

    Sounds like malware: (see message using startup so you can't run Safe Mode).

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be more difficult to detect as the
    cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    New Vista and Windows 7 version
    http://OneCare.live.com/site/en-us/Center/whatsnew.htm

    Original version
    http://OneCare.live.com/site/en-us/default.htm

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Maybe you are looking for

  • Need driver GeForce Go 7300 on Satellite A200 - 19L

    Hi allI use a laptop with Vista Home Premium 32-bit in German language! Then I install a Vista Ultimate 32-bit in English, but the screen resolution is not good... Taking place from 1280 x 800 1024 x 768 size. And the shortcut key Fn is also disable,

  • Satellite L650D-120 - impossible to install various OS

    Hello I am trying to install Windows XP Professional SP3 and Linux Ubuntu 10.10, but these systems do not recognize my laptop HARD drive or same installation process suddenly crashes before that. The only information that I could find sources online,

  • Prince of Persia-The two Thrones does not work when press ctrl to force detection

    Whenever I run POP: the two kingdoms It's the game begins Press Ctrl to Force detect Application And after that, the option to start the game is not clickable

  • Can I fix CRYPTSVC just manually. DLL?

    Windows Vista Home Premium SP2 - McAfee running from the first day. I had a problem for a while where some Windows updates work, but not all. I ran SFC and found the following: "... Cannot repair the military record [l:24 {12}] "cryptsvc.dll" Microso

  • Email signature changing blackBerry Smartphones

    I have a Blackberry 8330 through Sprint.  I have trouble to change my signature to e-mail when I responded with my Blackberry or compose an email from my Blackberry.  I would appreciate help do.  Thank you! Terri Sadecki First time user