Satellite A60: How to fix on the mouse?

Hello

My onboard mouse decided to malfunction. With my previous Pro the way has been from the top by the keyboard... with my A60 pro I suspect it is the same road, but I see no right to get in.... any ideas?

+ I also want to upgrade my memory board which I think is A slot. The slot under computer B, that I already did!

Thanks and good luck

[Edited by: admin 3 May 05 19:18]

Hello

you know that you lose your warranty if you open and disassemble the laptop!

Only the HARD drive replacement, cards WIFI and so on are userupgradable!

I think it is the best way to communicate with a Service partner.
A list with all Service partners can be found at http://eu.computers.toshiba-europe.com

Sammy

Tags: Toshiba

Similar Questions

  • Satellite A60 - how to fix a female connector on the motherboard?

    I have a Satellite A60 which is since 2005. About 6 months ago the CPU fan started running all the time and recently, the computer began to fade.

    Thinking that it is ongoing overheating, I decided to completely disassemble the computer, clean it thoroughly, remove the old thermal paste and install one DIMM memory more important.

    Well, everything goes like clockwork, until I tried to put the connector of the power on switch in the plug. It wasn't easy so I put gently a little more pressure on the connector using tweezers. At this time, the socket broke apart from the motherboard.

    I don't have the tools for a welding job, but could a competent technician successfully reattach or is there a new mobo in my future.

    Thanks for the tips!

    Dan

    Hello

    To be honest also don t know how to solve this problem, because I m not a technician for laptop and I believe that you will not find the technicians of laptop here because it s only a user to user forum.

    Regarding this issue, please contact an authorized service provider. Talk to the technicians and buy a cup of coffee. I'm sure they'll help you ;)

    Welcome them

  • How can I disable the mouse pad when you use a mouse plug-and-play?

    How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

    Hello

    Check with support of the manufacturer system, documentation online or forums that there is probably
    Shortcut keys that enable and disable the touchpad functions.

    Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
    and some come with a utility that loads in the Notification area next to the clock in the bottom right.

    ==========================================

    If necessary: (make sure that you have restarted at least once, if the above did not work)

    Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
    Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
    on the TouchPad and UNINSTALL.

    Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

    This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

    The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    Then go to the system manufacturer's website and get the latest touchpad drivers.

    Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • How can I activate the mouse 4000 magnifying glass

    How can I disable the mouse 4000 magnifying glass? Dog was lying on the keyboard and access the loupe. So, maybe there need help turning off the Magnifier on the Comfort Keyboard 4000?

    To get out the magnifying glass, press the Windows logo key + Esc

  • Satellite U500-1E0 - how to turn off the mouse "by clicking on" noise

    Please can someone tell me how to turn off the little "click" the mouse buttons do when they're depressed?

    Thank you.

    Hello

    What rattling noise do you hear?
    The rattling noise which is made by touchpad?
    Is - this mechanical noise or sound comes from the speakers?

  • Satellite U400 - how to return to the format of partition with HDD Recovery

    Hello

    I bought a new notebook Satellite U400 with Vista Home preinstaled thereon.
    I went through the initial configuration and once it was done, I realized that making the partitions of HARD drive does not fit my needs.

    So I resised the partition of 'Vista' (acctually I shrunk it) and made the largest partition of 'Data'.
    I did not do anything with the hidden partition.

    Unfortunately, when I did this procedure I formatted the 'Data' partition.
    Now, when I want to make the backup with TOSHIBA Recovery Disc Creator DVD I got the error message saying that it is not possible because I formatted the 'Data' partition.

    Is there a suggestion how to fix this error?
    The system's fine, the only thing is that I'm not able to save and restore the operating system.

    Thanks Vecerka

    It wasn't good buddy. If you deleted the partition of HARD drive recovery, then you would not be able to restore it!

    Now, you need a new DVD of recovery!
    You can order using this Toshiba page:

    https://backupmedia.Toshiba.EU/landing.aspx

    It s a BACKUP TOSHIBA EUROPE MEDIA ONLINE STORE

  • Satellite A60-218 - where to download the recovery disk?

    I have a Toshiba Satellite S60. It's a work computer and it's actually not mine but as I work with and I want it to be faster.

    Someone on the formatted past with an installation of Windows XP from F@kE and all the drivers disc was lost. Not only the wireless card but also a sound card and graphics.
    After much research I found the audio driver. The main problem is that is not a genuine copy of windows, and it is very slow because of Troy, etc..

    I think that the best way to fix it is to recover to factory settings (all the CDs are lost). Only I couldn't find in the website of the S60 satellite. Will there be a recovery iso image for download?

    Can someone help me? I'm really desperate...

    Hello

    First of all the S60 satellite does not for me and I think you mean Satellite A60.

    Well, as you said the best way to fix this is a Toshiba Recovery disk because it contains a picture of the factory settings. This means that the operating system (Windows) with all drivers and Toshiba tools installed. Thus, you will save time compared to a disc of Microsoft.

    The recovery disc can t be downloaded, but you can ask an authorized service provider. Maybe they can order a new one for you.

  • Satellite A60-106: Question about updating the BIOS and the BIOS Flash

    Fact the BIOS Flash update the BIOS or that requires a different file. I've updated a Satellite A60 BIOS to 1.9 but am not sure if cela flashed the BIOS as well.

    If this isn't the case, where I could get a file to Flash BIOS for satellite A60-106?

    Hello

    Sorry, but you question is a bit confusing.
    The update of the BIOS flashing the ROM module I put t know which version is installed before upgrading the BIOS, but if after the upgrade, a new version of the BIOS appears then the procedure was a success.

    The good BIOS and how to upgrade the BIOS information you will find on the page of Toshiba.

  • How to safely clean the mouse buttons? (Acer Aspire V3)

    My mother spilled coffee on his laptop Aspire V3, and now the mouse buttons do not work.  The touchscreen always moves the cursor, but the buttons do not respond.  How can I fix/clean these buttons safely?

    Only by removing the entire unit, until you are able to see if there are still coffee in the notebook. You can be sure that everything is dry now. It was enough to break something, especially a bad sign.

  • How can I disable the mouse pad? I prefer to use a mouse.

    The cushion is a nuisance especially when I try to type, perhps I catch it with my wrists, I don't know. I prefer to use a mouse.

    The 'quick and dirty' would be to cover the trackpad with something thick enough no pickup "taps" or "gestures". A card cut to tight should be thick enough, but I use a three thicknesses of sheet glued together and cut to tight in the trackpad to open (a corner cut so I can remove it when I have to use the trackpad). I did back in 2008 with an Acer laptop and now do it with my Asus EeePC 900 netbook; If I don't have the mouse with me (or the battery is dead - mouse USB wireless) I just remove the "cap" cardboard if I can use the trackpad.

    In addition, check with a Windows 7 support forum to find out how to disable this "device". This isn't really a problem of Firefox support.

  • Satellite L100: How do I reinstall the Office OneNote

    On my Satellite L100 is preinstalled OneNote. It also contains parts of the office, as the packages of Auditor spelling and language for Outlook Express.
    I just uninstall the Office OneNote and now I can't reinstall it. It is not on the recovery disc and the Toshiba - Europe.com can't take it anymore.

    How to get back the language and the spell checker?

    Hello

    Unfortunately, the OneNote is a part on the image of Toshiba which is placed on the Toshiba Recovery CD. It of not possible to reinstall simple applications without installing the entire recovery image.

  • Satellite A60: Unable to connect to the internet via a modem - no dial-up

    In my Satellite A60, WinXP Home, when I try to connect to the Internet via the modem of Toshiba, I get error 6: handle not valid, and after a few attempts, I get error 50: all devices connected / request not supported.

    Device Manager / network / card Asynchronous RAS displays an error (black exclamation point on a yellow background).
    The driver is asyncmac.sys = MS Access Remote network serial driver.

    I have:
    -tried to uninstall the RAS asynchronous card, but no luck, didn't say it may be necessary to start
    -modem uninstalled / reinstalled
    -update of Windows XP through windows update
    -update of the bios / modem / network drivers from Toshiba

    No luck, the RAS asynchronous card error is still there.

    Any suggestion?
    Thank you
    Alessio - Italy

    I think that this problem is Windows XP and map Asynchronous RAS, not the modem.
    The modem correctly composed the number, negotiates the user and the password, and then I get error 6 and 50.
    On the internet I found this tip for uninstalling and reinstalling the RAS asynchronous card:
    http://forums.practicallynetworked.com/showthread.php?t=6781
    I followed the instructions and run RArepair.exe.
    It uninstalls and reinstalls the map Asynchronous RAS, but RAS is still in error (the yellow field in the Device Manager).

  • Satellite L450 - how do you start the recovery from the HARD disk?

    Hello world

    I just joined the forum and already I need help.

    I have 2 questions (10) I'm an ODP, and I volunteer for a local blind group who all have laptops and rewrite the textbooks in braille users. Now a desire to know how start recovery from the HARD disk drive and what you should do disks for this.

    and (2) another received a laptop computer Toshiba A 100 and it does not start as soon as the Toshiba screen appears it lacks a password, we tried all kinds of passwords, tails of start and a new record of program but it does not start. Can anyone help please.

    Ken

    For instructions how to recover a Toshiba laptop with verification of HARD drive recovery procedure please this document > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

    The Satellite A100, I presume that you need BIOS password. Unfortunately, there is nothing you can do about it. Accredited maintainer Toshiba can remove the password for you.

  • Re: Satellite A300 - how can I make the webcam work on Win7

    Hello everyone.

    I had Win Vista installed on this Satellite A300 and it worked well.
    I had no problem at all.

    Then I moved to Win7 and now I'm going through the test of the work of webcam.
    I tried to install all types of drivers, even those for A500, but it would be of no use.

    So, how can I make the webcam work on my A300?

    I've tried everything, even the installation of Ubuntu on this laptop and still it wouldn't work. If this is your interest, I'm under Win7 in Spanish, x 32, Home Edition.

    I really need your help here, please, I beg you, I spent 5 days ago almost try ANYTHING!
    And yet, I get the message after each installation/reboot of the: "the camara web esta disabled o ha Fall.» "Por favor, it check las web camara su configs", which would result in something like "the webcam is disabled or it has failed. Please check the configuration of your webcam. I've been browsing the forum for related issues, but I have not found any solution :(

    Thanks in advance,

    Ozma.

    Hello

    Seems the webcam software has not been installed correctly.
    That Win 7 OS do you use? 32-bit or 64-bit?

    Here you can find Chicony webcam driver for Win 7 64 bit
    http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091026100013.zip

    and here you can find Chicony webcam driver for Win 7 32 bit
    http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091023184836.zip

    Good luck

  • Satellite C660: How to turn off the zoom of the touchpad on/off function

    My Satellite C660 zooms pages Web etc. in & on the touchpad mouse.
    I tried to get used to but its been a year & I had to buy a wireless mouse that I can get along with it.

    Can I turn off this feature so the Mouse touchpad don't zoom in & out everything more & just did normal move the pointer of the mouse & tap to click functions?

    Hello

    I think you are talking about the pinch to zoom.
    Yes, this can be disabled.
    Go to control panel-> mouse-> device settings (I think its last tab, it could be called Advanced too)
    Here click the Advanced Settings button
    Here, you should see all the available options. I guess that option should be available here.

Maybe you are looking for

  • Why wouldn't I be able to hear my calls

    iPhone 5 and I am unable to hear from people who call me talk.  They can hear me very well.  If I plug my earbuds I hear them then. What is the problem

  • Dynamically change the color of the text substring

    Hello! I'm working on a simple serial terminal and I would like to change the color of each line depending on whether the message is sent or received. I have an indicator of string in which I add all messages, sent or received. My problem is that whe

  • PXI does not recognize PXI-6515

  • Interrupt code 0 x 00000050 after update

    Have restarted the laptop on 10 times - no change. Have tried to start in all modes in the boot advanced options options. Still get the same blue screen that says: "a problem has been detected and Windows has shut down to prevent damage to your compu

  • Intereaction of Asic with Nand memory

    Hi all I'm new to this forum. I will start my display by basic heading. Interation of ASIC with nand. I'm working e.mmc device Hi has a knowledge base on this subject. How can I get more information about it. How to create a topic in this form. Pleas