Satellite A660-158 want covers do not

Similar Questions

• Satellite A660-158 - vision 3D support?

  Is supported in Toshiba Satellite A660-158 nvidia 3d vision?
  CPU - Intel Core i3 2130 Arrandale (330M)
  RAM - 3072? B DDR3
  -nVidia GeForce GT 330 M graphics card

  Help, please!

  Hello

  3D is supported, but only on an external monitor that supports 3D, but not on the internal display.

  More information on Satellite A660 you can find on the product page:
  http://EU.computers.Toshiba-Europe.com

• Satellite A660-158 - cannot start Windows

  Toshiba Satellite A660-158

  I bought a laptop Toshiba Satellite A660-158. It has served me less than a week. I think it's the broken hard drive.

  My problem:
  Once I start the computer, it started and has worked for a while, but suddenly, there was an error reading that I didn't have the time. Computer has been restarted. And does not load... Until the boot mode does not reach. But the initial test (with logo) succeeded. Takes a long time and finally gives an error:
  -----
  Cannot start Windows. Maybe it was because of the recent small difference is the hardware or software configuration. To fix this error:
  1. Insert your Windows installation disc, restart the computer (the complete transmission wasn't)
  2. choose the language settings, and then click Next.
  3. Select "repair your computer".
  If this disk is missing, contact your system administrator or computer manufacturer (he turned and said to wear to the DEPOT, but I do not have this feature).

  Status: 0xc000000e

  Details: Unable to start menu, since the required device is inaccessible.
  -----
  Please help me! Idon't know what make me)
  Please write to E-Mail: [email protected]

  Post edited by: HunterS7777777

  Hey,.

  And why do you think the hard drive is faulty?
  Have you ever tried the repair your computer option? Usually with this option you can restore factory in a few minutes.

  Also if you have the Toshiba recovery disc you can also restore the factory of this disc. Just boot from it and follow the instructions on the screen. You need to do a few clicks only, installation with all the drivers and tools happen automatically.

  If you have any other questions, please let us know! :)

• Feature Satellite A660-158 and FN key

  Model Satellite A660-158. Where find me the utility for the Fn key?
  I did find this utility in the drivers. That I posted the Fn buttons, I push.

  Grateful in advance.

  What you need is Toshiba Value added Package. This package contains several tools and one of them is Flash Cards.

  Install the latest version and I hope it works well.

  By the way: you as laptop preinstalled. What did you do with the original installation?

• Satellite A660 - 11 M - USB devices not recognized

  Hello
  I recently bought a new Satellite A660 - 11 M, and none of the USB ports seem to work. Ive tried plugging in all: 3 different mice, USB keys, ipod but nothing seems to register. It does not even say that the device does not work, when I plug it, nothing happens
  Thank you

  Hello

  Pretty easy to solve if it is Os/driver related issue. Reinstall/Update utility chipset of the [Page Driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] or go to Device Manager, click on, controllers bus USB, to uninstall, then restart the laptop then

• Satellite A660 DVD/CD drive does not detect disks

  Hello

  I have a Toshiba Satellite A660 with a CARPET * A BD - CMB UJ141ES DVD/CD-ROM. It is around the age of 18 months and recently I noticed that it does not recognize the CD/DVD. He made a few noises once inserted but then stops spinning and nothing happens or changes in my computer.

  Please note that there seems to be no apparent problem with the reader:
  -It is present in my computer
  -The device works correctly in Device Manager

  I already tried things:
  -Run Microsoft FixIt and troubleshooting of CD-ROM/DVD - both said that he could not recognize media
  -Remove the upper filter in the registry according to the many suggestions (this lower filters)
  -Update driver

  I don't know what else to do. Please help because it's frustrating for a relatively new laptop which is never left my office (don't expect much damaged parts).

  See you soon

  Hello

  Try to clean the lens of laser disks using a cotton ball and alcohol tip.
  Dilute with gentleness and precaution
  I know that in many cases, this simple workaround solution helped.

• Satellite A660 3rd party WLAN does not work

  Hello

  I had a problem with my WLAN adapter so I used to replace.
  Currently, I have installed card Broadcom Dell Wireless 1397.
  It has been defined by Device Manager and drivers have been installed.
  But it is impossible to turn on the WLAN.
  When I click the buttons activate WLAN, it just back to the OFF position.
  I also use Windows 10.

  Thanks in advance!

  Hello

  I own Satellite A660 - 16 M. Initially, it was equipped with Broadcom BCM4318 WLAN card. I decided to replace it with an Intel Centrino N-6230 dual band with 3.1 Bluetooth card. Replacement process was fairly easy, the problem was to make the new card working group. I use Windows 10 as an upgrade to Windows 7 Home. As you can imagine that the utility flash cards stopped working after the upgrade of the system, but Windows 10 has managed to cope with BCM4318 since the original drivers and Windows 7 registry entries have been always working in the background. The WLAN button above the keyboard worked, was so orange the LED in the front of the laptop.

  Situation changed completely with the new Intel Centrino 6230 N WLAN card. Despite he properly recognized by device with all the necessary drivers automatically responsible manager, I was unable to have the WLAN button and the LED orange work which is to turn on the radio (the card WLAN itself, its possibilities of wifi). The weird part is that the Bluetooth worked without any problems.

  The solution was to put a small piece of electrical tape on the 20 PIN of the new WLAN card to prevent WLAN DISABLE State presented to the motherboard. So RADIO WLAN is always on, so Windows 10 own wifi tools were able to switch on the WIFI network and... I see now all (2.4 GHz and 5 GHz) wireless networks. Of course the WLAN button and the orange LED still haven't work (it seems that it is somehow hardcoded to support only the original BCM4318) but I don't love about it. The most important is that I'm now a lot more capable wireless network inside my laptop card.

  I hope that the solution above works in your case, 8stack. Watch the attached files to see what she looked like, as in my case.

  Best

• Satellite A660-15t - display driver does not

  Hi all

  I have a SATELLITE A660-15t LOAN while my A660 11 M is being repaired, this morning 3 times I got a message that says - Display driver Nvidia Windows Kernel mode driver, version 258.97 don't work longer and was recovered successfully. This is the driver downloaded on the Toshiba site and it is quite disturbing since it is one loan and other machine my a660 had another serious problem with the same graphics chip (GT330M) is what can I do?

  Thank you very much

  Passman S

  I noticed the same problem on my Satellite P500 with the same NVIDIA graphics card. But after that the driver puts everything works well again.

  To be honest I don't know why this happen and always happens when I m using internet explorer or the browser chrome. When this happens to you?

  If you can continue your work after recovering from the pilot, according to me, there is no reason to panic

• Re: Satellite A660 - FN + F1 - F9 does not work after hibernate

  This problem often occurs when my A660 went from hibernation mode, and sometimes in normal situation
  It can only be fixed by a reboot of the system, I checked the application of Flash cards and it's work and I still can use it instead of the FN key
  also in this case I can always use FN or FN + 3 and 4 to increase or reduce the noise but is not workig at all with the function keys 1-9, until the system is restarted

  Hello

  In button start-> all programs-> Toshiba, you will find the Support of Flash memory card utility.
  You can restart this Flash Card Support utility if the question would never happen again.

  Perhaps you also need to reinstall this utility Support Flash Cards order to check if it would help to solve this problem,

• Satellite A660 BIOS update link does not work

  Hey, I got a message today (on Toshiba tempro) that the BIOS update is available.
  Unfortunately, the link does not work.

  I hope someone reads this part of the administration of technical assistance.

  Hello

  For PSAW3E:
  http://support.toshiba-tro.de/Tedd-files2/0/BIOS-20100920154827.zip

  Run as admin.

• Satellite A660-149 illumination buttons will not work.

  Hello
  Until today, I had no problem with this great machine. But now, on random, the lighting buttons are simply not. I managed to make it to the light, and when I start the machine upward, they seem to work. However, when he enters the office, they are brilliant, but does does not (except for the volume buttons). I also noticed that I can't turn off my touch pad, which is a bit annoying.
  It is possible that I have to move these buttons somehow, but I don't know how...

  Please open Toshiba Assist and OPTIMIZE option, below HardwareSetup tool. Check if the settings button is enabled or disabled.

  In the worst case, you can reinstall VAP and everything should be OK again.

• Satellite A300D-158 illumination button does not work on Vista

  Buttons light Toshiba does not work under Vista.

  I installed added package versions available in Toshiba support page, but Toshiba Assist do not see the list of function buttons where I can change the feature keys.

  When this value added package is uninstalled all buttons works with WMP, but during the installation - do not.
  Illumination power button is not working do not by the press.

  This means support to toshiba button does not work properly with vista.

  I don't have these problems with XP

  Hello

  As far as I know, you can enable and disable the lighting in the BIOS.
  Go to BIOS and check if you can activate it.

  By the way; you said that buttons don t work with Vista.
  Have you tested this with Vista OS preinstalled Toshiba?

  You should do this!

• Satellite A660-10W screen saver does not display

  Nice day.

  My screen saver, power saver, screen dimmer, etc. will come not on the same when I change the wait time, etc. and save the settings.
  I have a Magic Jack hooked up all the time to one of the USB ports - could it be the cause does not activate the Saver screen or could it be something in the McAfee Anit-virus, anti-spyware system cause?

  Thank you in advance.

  Hello

  Usually the screen saver appears if you would not touch the keyboard, the touchpad or mouse for awhile.

  I didn t know the magicJack but I googled a bit and it seems that this device that plugs into a USB port provides a standard phone jack RJ-11 in which any standard phone can be connected.
  This might be the reason, but that's just a guess

  But check the screen saver timeout settings:
  This will change the timeout of screensaver for all users
  -Open the Local Group Policy Editor (type gpedit.msc in the search)
  -In the left pane, click on to expand user, administrative templates, control panel and customization
  -In the right pane, right-click on the screen saver time-out and click on change
  -Select enabled
  -In the Options, select or how many seconds must elapse in order to launch the screensaver
  -Click OK and close the editor.
  -Restart the device and check if this work.

• Satellite A660 - Touchpad does not

  I have a Satellite A660-16Z and touchpad work not at all even if it is enabled with F9.
  I have to use a mouse external usb.

  I tried several times to uninstall and reinstall the touchpad driver from toshiba site without success.
  Initially, after the purchase, I remember the touchpad works, but I used an external mouse anyway.

  From this point on, I upgraded the bios to 2.00 more W7 updates and service pack 1.

  Any ideas appreciated.

  Hello

  The touchpad works if the USB mouse is disconnected?
  As far as I know there is an option that disables the touchpad automatically if the USB mouse is connected.
  You can find this option in: Control Panel-> mouse-> Pointing device

  Select this check box.

• Satellite A660 (PSAW3E) - FN keys not working not

  Hello
  I reinstalled my windows 7 64 bit on my laptop Satellite A660 and downloaded most, if not all the drivers on the official site of Toshiba UK.

  Although I do not use the FN keys, keep it bugs me knowing that they do not work.

  So... when I press the fn and none of my keys f1 - f9, they do not do anything, no card flash or anything like that.

  But the touch buttons to the upper work (the eco (I think), wireless, media, pause/start, light, decrease volume and increase volume) when I press them they sound and everything, but no flash cards is (not sure but I think that there is no flash cards for those) However when I press the power button on top of the mouse everything works including the flash ECAD

  The normal keys F1 - F12 function

  Tried to uninstall the pack of value-added and install again (after rebooting my laptop)
  Tried to restart flash cards too
  None of the above worked.

  Sorry for my English, not my language to the House :)

  Thanks for reading,
  If you need more information do not hesitate to ask.

  Hello

  Have you installed the Flash Cards Support utility?