Satellite A660 - display seems to come out of the 'calibration '.

Similar Questions

• Display will not come out of sleep mode

  I have a HP Pavilion p7-1410 Office running 64-bit Windows 8. Power management is in its default configuration.  When I try to wake the computer after being in standby mode, the computer comes out but the screen remains black.  I know with certainty that the computer itself is awake, that I can remote access to its hard drive.  But nothing of what I do wake up on the screen.  The only option that works for me is a hard-reset.  Someone knows how to fix this?

  The problem disappeared after the update of the system for Windows 8.1

• I have the iphone 6, since yesterday it does not open a lot of apps, they look just as they open you and then it comes out of the application itself, and I need information in my apps so I can just remove them and reinstall

  I have the iphone 6, since yesterday it does not open a lot of apps, they look just as they open you and then it comes out of the application itself, and I need information in my apps so I can just remove them and reinstall

  Have what troubleshooting you done?  Surely you have tried something before posting here, Yes?

  Hold power and home until is buttons restarts.

• A fix will come out for the problems with the new OS update?

  A fix will come out for the problems... the beach ball twirling, which began with the new update for the OS?

  Writing an effective question of communities of Apple Support

• When I print, the printer sounds like its printing but nothing comes out on the page. What should do?

  I just installed an hp F4480 printer, my roommate gave me.  My OS is Windows XP.  When I try and print or copy something the printer looks like it's printing and the paper passes by like it is printing but nothing comes out on the page.  Perhaps is out of ink, I guess, but I don't know how to say and I don't want to spend $50 to get a new non-refundable ink cartridge to see.  I did a print test page and the only thing that came out was a light that said the Page of Test printer Windows XP Blue cap but nothing else was on the page.

  It's really a problem of HP, not a Windows problem, and you should look for the HP Support help site.

  However...

  One of the lights on the printer are flashing?  There are 2 'estimated ink level lights' on the front panel.  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01673672&tmp_track_link=ot_faqs/top_issues/en_us/c01673672/loc:3 & cc = us & dlc = en & lang = en & lc = en & product = 3742086

  Genuine HP ink cartridges are installed?  The cartridges have been completed?  How long did it that the printer is correctly printed?

  When you installed the printer, you have installed the "HP Toolbox" application (or you simply download and install the basic printer driver)?  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=3742086#N44

• Satellite A660 - display problems, very dark display

  Hello

  I'm at the end of help please.

  I have a Toshiba Satellite A660 PSAW3A-07P00R.

  recently, it has been very, very dark display on the screen, almost impossible to see.
  I tried the following the problem solved.

  1. set the brightness to the MAX in the operating system, power management, etc.
  2 reset the BIOS to default settings.
  3. set the brightness to the MAX on the laptop brightness settings.
  4. check the external display via a VGA cable. tested ok.
  5. I bought a new LED 16 "screen but the new screen has the same problems. If I understand correctly, LED screens (1 data cable video on the bottom of the screen to connect to the motherboard) have the "inverter" built into the display, so appears not to be a problem of map display, brightness or graphics. I would be fair to assume that this is related to the data cable from the screen? If Yes, is a piece that can come from Toshiba? or something easily fixable?

  is there something easy, I missed, or something I have not tried?
  has anyone else experienced this problem and solved?

  Thank you in advance.

  > I would be fair to assume that this is related to the data cable from the screen? If Yes, is a piece that can come from Toshiba? or something easily fixable?

  As much as I know there is no FL inverter then, or you can override the display or the cable (LCD/FL)
  LVDS cable) with a new one and the test shows again.
  I found a compatible: K000103140 LVDS CABLE

• IPhone charging question (connector dock that comes out from the right)

  

  So this my iphone, the dock connector is not going to bottom. Glue always from the right.

  Yes, I tried to clean it... my phone seems to die at between 20 and 30%... and when I try rebooting it shows me its out of the battery.

  Please tell me exactly the problem and solution if anyone can cause I have no apple store here where I live

  And I have been ripped off before by a mechanic, emphasizing the fact that it is a problem of simple battery.

  Should I change the dock connector, or is it a software problem? I tried to sync with iTunes...

  Does not help. I don't have ebay either help me with fixing kits.

  He came to the point where I can't trust anything less 40%... help please.

  Have you tried to find an Apple authorized Service provider?

  Find an Apple authorized service provider

  Have you tried using a different USB cable and check the pins on the docking port?

• Toshiba satellite L755-S5170 how to recover out of the box state

  How to get out of the box state. I know that it will not be that difficult, I had products HP which makes this task easier!

  Moved to windows

  Hello

  Regarding your question, it is out of our reach and you can contact your computer manufacturer.

  Thank you.

• Satellite A500-1GK - when it comes out in Greece?

  I was wondering if anyone knows what A500-1GK released in Greece. I am interested in buying a laptop with core i7 processor, but at the moment there are no available model of Toshiba. I was ready to buy something from another company, but I would certainly prefer to buy a computer toshiba laptop.

  I'd appreciate it if someone could give me some information about this model :)

  To pick up the info available by Satellite A500, models of laptops in Greece visit http://se.computers.toshiba-europe.com/innovation/gr/series/???-Satellite-A500/1069914/

  Laptops vary by country of specific products so check or the other Greece from Toshiba or check with your dealer to find out which models are available in the market.

• Re: Satellite P300D-h-13 - when comes out the new Ati for Vista drivers?

  When can we expect to release new drivers for mobilitiy 3650 GPU for Vista 32 bit?
  On last official Toshiba web are 7.08 last year.

  I'm afraid that nobody here can provide the answer to this.
  Who knows what are the Toshiba projects and if the driver update is available or not.

  You have gambling problems?

• Satellite A660-17 t - PC Health Monitor shows the problem with the battery

  I have an A660-17 t I've had since November 2010, I used a good amount, but not always on the battery, I believe that the battery has between 10 and 20 on this charge/discharge cycles.

  I have updated the BIOS to v1.80 when I got the laptop, everything seemed to go well. Recently, in the last 2-3 weeks health monitoring software reports that the battery is in poor health, showing that the capacity is reduced to 40% of the original capacity. I do not believe this like when I work on battery I get several hours of use.

  I have today updated BIOS v1.90, although there is no changelog that I can find, he says just "enhanced features" or similar.

  Is this really a faulty battery, or it is somehow that the software correctly reads the value of the capacity of the battery due to a change in Windows or another change in the system? I don't see how a battery can work for the same amount of time it has always done and actually have a fault.

  Any thoughts? Should I return it to the retailer and report an outage, or is it worth the wait to see if a future update of operating system or driver solves this problem?

  Thoughts welcome!

  Hey,.

  > I do not think this as when I work on battery I get several hours of use.
  This means that you have the same time remaining on battery as before you saw the error of the integrity PC monitor?

  In this case, it seems that the battery is ok and it's maybe s simply the wrong tool of Toshiba information. Then I recommend to reinstall PC Health Monitor, which you can download from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads

• test page prints fine when I send a page color to print any color comes out and the black looks like

  I have a gateway GX 7022E Prod. D945GBI CPU Intel pent D 32-bit PRINTER HP photosmart 7960 OS Windows XP 32 bit

  No error message last week that I could not print in color my documents or on the Web or my camera... If I hit a test in my printer the roadmap page came out perfect with dark black text and 3 color bars, which were veiny any deep color. To the printer directly, it seems to work... From my computer to the printer it does not print in color but is printed in black & white... I spent hours with all the tools of diagnosis HP WITHOUT HELP I downloaded the new drivers, NO HELP

  Anyone can come up with a fix for me. ;. I forgot to mention that I'm a fool

  Thank you very much

  Gary

  Gary Braverman

  First thing you should check is the print settings in the driver.  You must ensure that the driver know that you want to print in color and black and white only.

  To check/change the settings of your printer driver:

  1. From the desktop, click the Start button.
  2. Click on Control Panel.
  3. Find printers and fax machines.
  4. Once your in the folder printers and faxes, find your printer.
  5. Right click on your printer.
  6. Click on Preferences.

  Now you should be in the area to check the layout and paper/quality settings.  Make sure it is set to print in color.  Don't forget to look through the advanced options.  Make sure that it is located and let me know what happens.

• Windows7 windows show open on the taskbar, but seem to be out of the screen-how can I get the focus?

  New Windows 7 and Firefox - icon in the taskbar, but will not display the window on the screen. When I put the cursor on the icon the little windows show which is open. It seems that the windows display is somewhere off the coast on the right side of the screen. Don't have a clue as to how it happened. How can I get the windows on the desktop where I can see? Thanks for all the tips that will help you.

  In Windows 7, pressing/holding the windows key and right arrow key FINALLY made the window reappear to me! Deleting the localstore.rdf did NOT work for me, unfortunately.

• Satellite A660: Can I use HDD recovery after the C formattg

  My A660 comes with windows 7.
  I intend to install Win 7 Pro.
  I was wondering if I format the C drive leaving 2 partitions (restore) system I'll still be able to use miladi autimatic restoration? - or the start setting will get too erased after the format of C:.

  According to me, the info partionds and start-up of recovery are all in the system folder and I will not format that?

  Thank you guys

  Hello

  As I know, that you won't be able to use HARD drive recovery option after installing other Windows operating systems
  HARD drive recovery would be only available with Toshiba preinstalled image.
  The new facility would change the master boot record and boot model will be modified. I guess the recovery of HARD drive option is not available in the menu new.
  So create a disk recovery first before you install any other OS!

• Satellite A660-O7R 3D - tasks Greens/smear on the screen

  I've updated all the drivers and software to enable the 3D vision following the instructions on the support pages. Recently, I noticed when using windows media center, corel winDVD and starcraft 2 that there is a lot of green spots scattered around the screen. It's worse in media center, watching TV or if I'm in the menu there is green/purple smears that are all along the contours of background graphics.

  in this move with the video, they are all along the outlines of people or objects while this mode TV, I'm in the menu of windows media center, and then they lie along the edges of those moving graphics. They seem to be frozen if I disable all animations. I tried reinstalling the drivers nvidia on the support pages, but it made it worse that the green spots began to appear on the wallpaper, and in microsoft office programs as well.

  So I ended up doing a system to a restore point a full month back... it worked fine for an hour after that, but the same places and tasks began to appear again. the problem that I've seen so far is seen gradual rather than sudden. all 3 software I mentioned earlier are the only programs I have what 3D support and also used very often

  Please can someone help? I love this machine, really looking forward to having to go back to the shop

  Hello

  > So I ended up doing a system to a restore point a full month back... it worked fine for an hour after that, but the same places and tasks began to appear again.

  So he looks at it s more linked to the software with respect to the hardware problem, but of course, it could be related to the graphics card as well. So nothing is impossible, you know

  Have you noticed that only by using the 3D feature?

  If yes then the graphics card driver can cause this and as you say the use of the driver of nvidia page is worse then perhaps it s driver problem

  But to be honest I didn t found similar problems in the forum so it's really hard to tell what could cause this.