Satellite C50 - B - 14 d cut

Similar Questions

• Satellite C50 - B - 14 K - Bios problem

  Hi guys,.
  I have the satellite C50 - B - 14 K
  all I wanted is to get into the BIOS, I tyed anthing. F12, hang in there and turn back on, f2, all F but nothing
  all I want to do is change the usb boot priority

  Ty guys

  Hello, try this... Press and hold down the F2 key and then turn on computer.
  BIOS configuration utility will load.
  Set the date in the field 'system '.
  Set the time in the field 'system '.
  Press F10 and "confirm the message" will be displayed.
  Press the Enter key.
  The configuration of the BIOS will end and the computer will begin.
  I hope this helps for you to put in the bios.

• Windows 10, nvidia 930 m Satellite C50-C022 opengl error

  I bought this Toshiba - Satellite-C50-C022 with 10 64-bit windows. I can't update the drivers nvidia for the newest version. When I do all the appz I use which uses opengl, the screen goes black. I have to stay with the default drivers 347.52 with what he came. This isn't a problem with appz using direct3d as 3dmax. The problem is with opengl and new drivers nvidia on this laptop.

  Black window in lightwave
  
  Black window in modo
  

  I even downloaded the new driver from toshiba website tcm0007400h and its still does not not with opengl.
  http://www.MyToshiba.com.au/support/...download?OS=33
  

  I tried editing the registry and also disable powermizer as shown in this video
  https://www.YouTube.com/watch?v=Zt00C-HXFbA
  

  Anyone have the same problems with this laptop to win win 7, 8 or 10? Is it possible to downgrade to win 7, 8?

  I think that I will never buy an another Toshiba laptop again. My friend warned me not to do, but I just wanted to try this brand. Very poor updates and support.

• Only the C partition on the new Satellite C50-B-14Z

  Hello

  I'm not an experienced user, but I'll do my best to explain the problem.

  I bought Toshiba Satellite C50-B-14Z with 8.1 installed Windows, and when starting the system, I noticed that there is only one partition of hard drive, the C partition. When you enter the disk management, I see there are 4 basic partitions already (500 GB disk):

  -Recovery - 1 GB
  -EFI system - 100 MB
  -Recovery - 10.97 GB
  -C (boot, page file, crash dump, primary partition) - 453,57 GB

  They are all primary partitions, and I read on the forums that you can have only 4 those primary, so I can't add one more to the D partition, I would like to have.
  Possibility that I offered in "actions" is to create a virtual hard drive, but I guess that is not the same thing.
  I also read that you can create new partition if you have "unallocated" space (partition), but all 4 before indicated are those primary and not affected.

  Then, the next opportunity that I read on is to do a right-click on C and "reduce volume", and then create new partition from the rest of the space (if I understand it is good), but then I read in Windows Help:
  "When you shrink a partition, all regular files are automatically transferred to the disk to create the new unallocated space. There is no need to reformat the drive to shrink the partition. » ... "If the partition is a raw partition (that is, a lack of a file system) that contains data (for example, a database file)", reducing the partition may destroy the data. ""

  Normally, I have never tested a large part with the C partition, and now I don't know if I would destroy some system files while doing this "shrinkage" and I don't have the CD installation for the system, so I can't fix it if I ruin something.

  Please advise...

  Posted by just
  

  [So the next opportunity I haven't read is to do a right-click on C and "reduce volume", and then create new partition from the rest of the space (if I understand it right), FONTS] [/ COLOR]

  Yes, this is the right way to have more than one partition. You can define what capacity should partition C and any free space can be "convert" to the D partition.

  One last thing: don't forget to create a recovery (DVD or USB) media. It is very important to have recovery image back-up.

• Satellite C50 - update Windows questions

  Hello

  I bought a Satellite C50 windows 8 year last for my partner (who has the patience of a gnat and click on everything and nothing), when windows updates were installed on a month ago, she lost the office link, she kept flashing on and outside. She managed to access the Internet through internet Explorer tab (only for the bingo & ebay lol).

  An other recent windows update took forever to load then a failure to configure changes return messages that froze the laptop.

  Yesterday, I managed to return to the default value, all settings, after all personal preferences, I went to update the page to change the settings to apply updates before installing, and he said he had to be updated before choosing the updates!

  I'm back there again and I was wondering if there was a specific update that is causing all this trouble. Although my bank balance is looking better, I'll throw this lappy in the bin and just buy another!

  Help, please. Thanks :)

  Hello

  In general, I agree with the view of s IronMan.
  The point is that you can always set the computer laptop initial configuration using the recovery procedure.

  After this procedure the system windows will install updates from Microsoft.
  This may take some time and the unit must be restarted several times during this procedure.

  A system update will install before other updates have been installed.
  Therefore, this process could take a little longer.

  In addition, you will need to update to the latest system 8.1 Win the old Win 8.
  This can be done after have installed all updates to Win 8.
  The Win 8.1 update should be done as recommended by Toshiba.

  The complete step by step instruction can be found here:
  http://www.Toshiba.EU/innovation/generic/windows8_1-message/

  You will be also informed about updates of Toshiba Toshiba service station preinstalled.
  In this case, it will be very easy to get the latest version of the driver.

  I hope this helps a little

• Vodafone Huawei 3 G Dongle will not work on Satellite C50 and Win8

  Recently bought this laptop running Windows 8.
  No matter what I try, I can't do this USB 3 G Huawei Vodafone dongle to be recognized by this Toshiba laptop.

  This dongle works in all our other laptops and laptops and tablets from other brands with Windows 7 or Windows 8 is certainly not something to do with the dongle the software, he moved, drivers or the operating system.

  At a time where it is plugged into the port USB, he opens the window asking what we want to do, telling me that the port and USB controller works, but that's all that.

  When you open the Vodafone software to connect to the 3G option Connect is grayed out and no device is indicated. In other words, it is not to recognize the modem for a reason any.

  As he is OK anywhere else, it must be something to do with this Toshiba laptop.

  Any suggestions / help would be greatly appreciated.
  We have loaded other versions of the Vodafone software and it made no difference. It must be a hardware conflict problem.

  It seems that the device does not recognize the USB dongle.
  Did you test all USB ports?

  As much as I know Satellite C50-A-xxx supports 1 USB 3.0 port and 2 USB 2.0 ports
  Check all three ports.

  You can also delete all the USB controllers and hubs in Device Manager and restart the laptop. After restarting again the unit should automatically recognize the USB ports.
  Also try to disable the sleep & Charge USB in the BIOS (if available).

• Satellite C50-B00N - Internet browsers do not correctly load graphics

  Hello

  I recently bought a Toshiba Satellite C50-B00N Intel Core i5 500 GB laptop with model o. PSCLUA-00N007 to web development and design purposes.

  I was faced with poor graphic of loading in all browsers - Firefox, Chrome, Internet explorer. Some of the images and graphics on the Web site do not properly load, and they also seem to be really slow.

  Appreciate your help to solve this problem.

  Thank you
  ANU.

  Hi Anu

  It is not easy to say what the problem is here. You posted in the networking and internet category, so I have to ask if you're sure the problem described is in connection any with internet connectivity to 100%?
  Did you do some basic tests like difference between WLAN and LAN or test of connection of your device to different networks?

  For two months, I have Satellite S50 - B originally preinstalled with Win8.1 and it works perfectly. I use it at home and in my office.

• Upgrade memory of satellite C50-A-157

  I am looking for the upgrade of memory and I need some advice. Please let me know if any of below works on my laptop?

  https://www.Amazon.co.UK/Corsair-CMS...ct_top?ie=UTF8

  https://www.Amazon.co.UK/HyperX-IMPA.../DP/B00KQCOV5C

  My laptop: Satellite C50-A-157

  Aloha,
  the revenge of CMSX16GX3M2A1600C10 Corsair 16 GB (2x8GB) DDR3 1600 Mhz CL10 passionate Notebook Memory Kit is probably compatible with your laptop if you have 2 slots for memory. Http://www.toshiba.co.uk/discontinue...ite-c50-a-157/ says here onley supports up to 16 GB. Kingston memory is a low voltage RAM is not compatible with your laptop. DDR3L - what means that which is low voltage

• Satellite C50-A-1CK double characters appear when you type

  All the
  I have a new Satellite C50-A-1CK which is perfect for my needs, EXCEPT that I get continually double characters appearing on the screen as you type which is:
  A. VERY frustrating
  (B) waste a lot of time because I have to keep correcting words to remove duplicate characters.

  Please someone know of a fix for this? It can affect any key on the keyboard, and no matter if I type slow or fast, press firmly or as light as possible.

  To check for updates to the firmware, but none is available.

  Thanks in advance!

  From my experience, that the problems of characters double have been solved by BIOS updated.
  That's why I recommend you update the BIOS (if possible)

• Satellite C50 - A - the upgrade to win little 8.1 win7

  Hello

  I was wondering, I have the Windows 8.1, upgrade of the media that I had for my Toshiba Satellite C50 - A computer. Upgrade to 8.1 Windows and got the upgrade DVD, came with the laptop. So I do it just insert the DVD, click on Set up, or do I need to go back to factory settings, then insert the DVD and as a blind it student, will need sighted assistance.

  Any help, advice, tips of people made this before. I have a 1 TB USB drive Toshiba external hard, so have saved all that and added a number of things today, but saved the rest of my stuff, docs, College work, emails, my settings for RSS feeds, contacts for outlook 2010, programs, music, TV, movies, bookmarks, etc, so all advice.

  Going to do it tomorrow. make a programming course and the Professor uses windows 8.1, and need to develop windows blinds and windows phone apps.

  Marvin from Adelaide, Australia.

  The exact specification of your model is unknown to me, but I assume that you got your machine with recovery disc Win8.1 so if you want to use Win8.1, you must start your computer with the recovery disc and make clean OS install.

  I don't know if you got your machine with Win7 preinstalled initially. If so create recovery media (DVD or USB) using pre-installed recovery disc creator Toshiba before you start the installation of Win8.1.
  This created recovery media, you can use if you want to have the machine with Win7 again.

• Installation of recovery on Satellite C50-A-1Jn

  My son has a Satellite C50-A-1john and was doing a restore of the partition of drive hard, but stopped at halfway.

  When it tries to start, it receives the message "no boot device - please reboot."

  He did not create a floppy disk to restore his laptop, but I found where I can order one from Toshiba. Before I spend £30, I want to know if it will restore his laptop.

  Recovery image installation can not be interrupted. Now, the laptop is confused and unbootable. Problem is that interrupted recovery installation cannot continue, cannot be started from the beginning and also not ended correctly.

  What you need to do now is to get the installation of recovery disc and start the installation again.

  After doing this you will have factory again and everything works OK.
  Biggest mistake has been that media recovery is not created in the past.

• Satellite C50-A569 - activation key Windows 8.1 problem

  I reinstall my windows 8.1 which came preinstalled on my Toshiba laptop. It will ask you an activation code for windows after installation. My Windows 8 come pre-activated, and I can't find my activation code. You can get me my activation code.
  
  
  
  Here is some information on my laptop:
  
  
  
  
  
  Satellite C50-A569
  
  
  
  Product code: PSCGNV - 00Y001AR
  
  
  
  Serial number: 2E161369S
  
  
  
  She was purchased by the Qatar.
  
  
  
  
  
  I hope you will reply quickly.
  
  
  
  Thank you.
  

  Hello

  According to specifications specification , you got your laptop with the preinstalled version of Win8.1.
  With other words, your laptop has been pre-installed with original recovery image designed for this model of laptop. Preinstalled recovery image should not be enabled.

  Recovery image is also saved on the HARD drive and it is possible for you to create bootable recovery media (backup recovery) that you can use for the installation of original recovery image.
  > I'll reinstall my windows 8.1 which came preinstalled on my Toshiba laptop.
  If I understand you right you try to use your laptop with the original recovery image again. Is this good?

  I really don't know what's the problem here, but after the first start, connect your laptop to the Internet and complete the installation. Preinstalled Windows must be activated automatically.

• Satellite C50 - secure boot not configured correctly build 9600

  Hello

  Recently bought a refurbished nine Toshiba Satellite C50 8.1 of windows operating system. Was very happy with it but found the message 'not properly configured SecureBoot 9600 building "watermark in the lower right corner of my office. '.

  Decided to search the Internet for a resolution and after being gone on 3 Troubleshooting sites, discovered on the necessary BIOS configuration, but he warned that it was for experienced users who know their stuff on the technical aspects of computers. While I am computer literate, I'm not someone who likes to mess with the advanced options. Then, I came across a reliable computer blog that had a detailed post on SecureBoot.

  (Link to the blog post and specfic):
  www.techrepublic.com/blog/Windows-and-Office/deal-with-the-secureboot-isn't-configured-correctly-watermark-in-windows-81/)

  I thought that that would solve my problem, and I have to admit that he helped, telling me to use windows powershell as a precaution before using the BIOS Setup. I was glad I did as it came in saying that I have a policy of SecureBoot of the present failure on my laptop which case I have to request technical support for a specific system solution that would generally be an update of the firmware.

  I tried to call, but the line was busy and estimated it might be easier to post this question on a forum.

  If anyone has an answer please help as I would like to really activate SecureBoot if possible, I believe that computers must be set up with the best possible security options and makes me feel comfortable in knowing that it is implemented safely.

  Someone commented on the blog and posted this solution:

  The fix for the registry to remove the watermark is as follows.
  1. start the registry with the Admin (C:\Windows\regedit) rights Editor
  2. navigate to the following location
  -> HKEY_LOCAL_MACHINE-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------system.
  3. here, the two values "ConsentPromptBehaviorAdmin ' and 'EnableLUA 'the value' 0'.

  You can also try to activate the boot option secure in the BIOS (in which case it is not already selected)
  To enter the BIOS, press F2 during the turn on/off the device.

  Also recommend that you check this page from Microsoft:
  http://Windows.Microsoft.com/en-us/Windows-8/secure-boot-watermark

• Bluetooth settings went on my Satellite C50-A-19U

  Hi you all,.

  the bluetooth settings in the Windows settings on my laptop Toshiba Satellite C50-A-19U have completely disappeared. I can't connect to one of my bluetooth devices more. I have installed drivers (News), has been in contact with Microsoft forum (answers.microsoft.com...), nothing brought the parameters so far.

  Everyone recognizes this problem or knows how to solve? Or what information you need to help me with this problem?

  Your help and your suggestions are welcome, thanks in advance!

  Friend, DUT Twente!

  Guess what? Try reinstalling the packet filter for the Atheros BT driver and the driver of the system Toshiba.

  The laptop was equipped with Wlan / BT Atheros WB335 module.
  For BT work (running Win 8 / 8.1) you must install the software items mentioned:

  • Packet filter for the Atheros BT driver
  • Toshiba system driver.

• Re: Satellite C50-A-1FW - update CPU i7-3612QM

  I would like to know if the motherboard (chipset-socket) to a Satellite C50-A-1FW supports an i7-3612QM?

  Hello

  Satellite C50-A-1FW motherboard support Intel HM70 Express Mobile Chipset.
  Take a look at this page-> PRODUCTS COMPATIBLE Intel
  http://Ark.Intel.com/products/67419/Intel-bd82hm70-PCH

  You will find processors supported.

  But beware: processor upgrade is not supported by the laptop manufacturer. Although the chipset would support the new processor, the BIOS may not support this CPU.

  In this forum, you can find many discussions on upgrading processors. In each thread, you will find information that these updates is always risky, and no one knows if it will finally work.