Satellite C50D does not (black screen)

Hello

I have a problem with a Satellite C50D-A-133 which does not (rest on the black screen).
I tried the reset procedure and I replaced the RAM without success.

Has anyone had this problem?

Thank you in advance.

PS: for information, if someone reads Toshiba does not have this message, the french support site (redirects to the homepage when you enter the serial number or by selecting the model in the list).

By reset procedure do you mean remove the battery and by pressing and holding the long power 30 dry?
It is the common procedure in case the laptop doesn't wake up no more.
But of course this will help in case of a hardware problem.

It would also be possible that corrupted BIOS CMOS data prevents the machine to start. This can happen in case of module of the BIOS EPROM, but this should be verified by the authorized service provider

As you can see, it's really not very easy to say what could be wrong here

Tags: Toshiba

Similar Questions

  • Windows does not, black screen

    My loptop does not load windows its all Blacks some 1 help me

    Original title: error windows 7

    My loptop does not load windows its all Blacks some 1 help me

    Hello

    Do you get a splash screen at startup (Logo of the manufacturer of the motherboard or computer, etc.) or it still not completely black power on?

    If there is absolutely nothing on the screen to power on, contact the manufacturer if under warranty.

    If it is not under warranty, contact a good computer repair workshop, local and reputable.

    If you get something on the screen to explain what it is.

    See you soon.

  • Desktop does not - black screen with the cursor and access to Task Manager

    Well, I played recent MMO and to do this, I had to update my sound drivers and graphics. I managed to finish my first uninstall all the old drivers-flawless and it worked perfectly thereafter with no video issues (that I had before the uninstall, but nothing harmful to the system). Eventually however, I started to get some pop ups Windows 2008 C++ REDIS saying that atieclxx.exe had asked to be terminated in an unusual way. No problem, I close the error message and everything always works as it should. No random crashes.

    My problem is that wermgr.exe (I am fairly certain that this is the title, but I did not work right now), began leaving me with a black screen and the cursor when I connect. In most cases, I can open the Task Manager by pressing Ctrl + Alt + Delete, however, it sometimes won't start, and when I start to kill unnecessary tasks, they take some time to die. I know that black screens are often a defective start of explorer.exe, which manages office and file, browsers so I use the Task Manager to run it and it dies or continues to do nothing without making the office. Whenever this happens, wermgr.exe was running (Windows error handler). When I kill this task, which often has duplicates, I can finally get explorer.exe to load. I have the same problem with safe mode, except that the display shows the version of windows and the details in each corner until explorer.exe load finally. I've also had freezing issues long whenever Werfault.exe jump upward and the only thing that those fixed has been disable Werfault.exe in the services menu.
    It is clear to me that the windows error reporting programs consume a lot of the capacity of the CPU of my computer and they are probably the source of the biggest problems I'm having. I should stop start, or they are just neutral, awakened by a bigger problem?
    On a smaller note, C++ error is probably due to me not having is not the correct edition of the redistributable C++ installed, or perhaps too many distributions. The last edition, I have installed is 10.0.40219 of the x 86 and x 64 redistributable and runtimes (2010). Are the oldest, I installed some updates ATL and 5 2005 Redistributable (2 x 64 versions). Atieclxx.exe is the program having the pop-ups demand 'unusual termination. " The version of my ATI Radeon drivers are included in Version 2012.1116.1515.27190 of the AMD VISION Engine Control Center.
    Now, finally, I think it's useless, I'll give you my specs:
    OS: Windows 7 Home Premium, 64-bit
    Processor: AMD Athlon TF-20, 1.60 GHz
    RAM: 3.00 GB
    Model: Acer Aspire 5534
    BIOS: InsydeH2O V1.12
    Graphics card: ATI Radeon HD 3200, using aticfx64.dll and aticfx32.dll
    I do not believe that a reinstallation is necessary, because I got my computer in good enough condition that I can write this message and use it as usual, however, it's a nuisance to do, because it requires waiting a few minutes while the wermgr.exe process is stopped by the Task Manager.

    HiJack This help "fix selected", I removed the SmartShopper and BHO entry no name, as well as a few more suspicious looking files and those to the left of the old installs (windowblinds). I also deleted all entries in ΓΈ16 because I didn't need them and didn't like their operation. Then, I deleted two mistakes of R3, who looked extremely suspicious.

    IT'S FIXED NOW!
    I restarted and connected to be greeted with my office. The second csrss.exe is still underway, and atieclxx.exe works well as well. Although they appear to be the cause of the problem, because I am intimately familiar with the process of my computer, it is also clear that many of the comes from problems of registry and the programs that I have only half managed to uninstall. I hope this helps people to the problem in the future, and if my problem recur soon, I will return to this article with more information.
    As a final note, I was extremely impressed with HiJack this, because I used it for the first time in order to solve this problem. He kindly explained to me why he alerted me and what kind of problems listed that would cause a lot of things helped me to decide what to remove. Now I know why divert this is recommended everywhere on the internet as a diagnostic tool.
    To not appear as an advertising bot, but it's the tool that solved my problem for this, I have it suggests. in any case, good luck and I hope you can fix this problem yourself. With the help of google, an open mind and careful decision making, it is possible to solve anything. I do not recommend using a shotgun to do so ;)
  • Satellite A300D-15B webcam does not - black screen

    Hi, I would appreciate the help. I have a new L300D-15 ter and we have problems with the webcam. It's less than a week. We use MSN a lot and noticed that sometimes the webcam has become black while on a video call - when I say black you could see us like shadows of contour. Once we waved our hands on the webcam and it seemed to come back to life, but othertimes we had to stop the video call and re - call to retrieve the image of the webcam.

    We phoned to Toshiba and reinstalled the driver but it seems to have done worse. When we opened the independent software for the cam us are visible for a second and then black. We tried on MSN it happened once but we could clearly be seen after a few seconds, and he remained on for the duration of our short call. This has happened on and off on the power supply.

    Some ideas would be appreciated.

    Have you tried looking at its properties?

    There are options here, you can activate night mode so you can see yourself when you use your camera.

    hope this will help... :)

  • Satellite C50D does not level Windows 10.

    Everything is ready to go, but when I click on 'Continue', I get the points going along in a circle, until I stop, yesterday, it was 3 hours. I bought this computer 21/11/14 & have had no end of problems, but cannot get any satisfaction in the shop I bought it from. I came back from their share yesterday & was upgraded to Windows 10 would probably support it.
    Thank you very much VivM.

    >... told me to upgrade to Windows 10 would probably support it.
    Help with what exactly?

  • Satellite C660 does not start on disc or USB

    My Toshiba Satellite C660-DSC0QE app, BIOS version 1.80, will not start Windows more - it just goes to the dreaded black screen with white cursor.

    I tried a system Win 7 recovery disk, a USB with software from Kaspersky on her recovery and even a full Win 7 installation disc, and it does not start at one of them.

    The boot order is set correctly, (optical drive or USB port) devices are read, but their initialization never actually in them - there is an obscure error message, or it acts like they weren't there at all.

    The obvious answer to these forums seems to be disable secure boot mode and then switch the to the CSM UEFI boot mode. Easier said than done - the menu options don't exist at all in my BIOS/CMOS screens.

    Finally, I see no way in the instructions to get a BIOS update occur without being already in Windows on the PC - http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm I'm assuming that the BIOS version 2.00 would have these options.

    Any help gratefully accepted!

    Hello

    I assumed that you have a white blinking cursor in the upper left corner.
    Is this correct?

    These symptoms appear where the system can not find a boot device (HARD drive) or memory problems (RAM module).

    First of all, you said that you have UEFI / CSM boot mode in the BIOS settings.
    So I m asking you what parameters of start mode appear in BIOS exactly?
    Find you these settings in the right area?
    Usually, you should have an area (tab) called security in the BIOS.
    In most cases, you will find a safe boot option, but the Satellite C660 does not support this option because it s too old.
    But the startup mode (UEFI /CSM) should be available in the BIOS. Check the settings in the BIOS of the system area

    Anyway, as I said above; It could also be a memory problem, so I recommend you to check if the memory is OK.

  • Satellite C650 does not start with android phone on

    Hello

    I have a smallproblem. My Satellite C650 does not start when my android phone is plugged into the USB port. It sticks to the Toshiba start screen. I checked the boot order and the hard drive is the first on the list, so it isn't that. Any advice will be welcome.

    Thank you very much
    Ian

    Cool. Thanks for the comments.

  • Satellite A300D does not illuminate

    Toshiba Satellite A300D does not illuminate

    The battery light is red when it is plugged in with the light of the white plug

    When I press the power button it lights up two other fires, and one that looks like a sheet a4 fact paper.it a vibration when turning it on also.

    Any help would be greatly appreciated

    Disconnect the power adapter and remove the battery.
    Leave the laptop unplugged and then hold down power button / stop along 30 sec.
    Then reconnect the two parts and check how the unit works.

    In which case nothing would be visible on the screen, try replacing the RAM modules. Perhaps one of the modules is the troublemaker
    Otherwise if the RAM modules are OK, the problem could be linked to the motherboard.

  • Satellite L850 - 17 k - black screen with blue dots

    Satellite L850 - 17 k black screen with blue dots see photo
    It is THE video card, can't find it.

    See photos

    If you see the same on internal and external display LCD, I presume that the video card is faulty.

  • Re: Satellite L675-10 t black screen after disassembly problem

    Hi all

    I recently had some problems with my L675-10T overheating, even when I was with a big fan of cooling for the games.

    I realized that the problem resulted from blocked exhaust and dust and it is why, after reading and watching the many tutorials, I opened my laptop computer successfully and all cleaned up.

    The temperature dropped to 20 c and I was happy.

    The next night, however, took my laptop and headed for the living room, and it will stop.
    Black screen and nothing passed. So I ran to the internet and found this solution, it worked btw.

    1. turn off your computer
    2. unplug all wires (including energy)
    3. disconnect the battery from the bottom of the computer.
    4 re - connect the power cable. (the battery should not be in the computer)
    5. turn power on. The screen works. Choose start windows normally. (if you get this screen)

    The thing is, the same thing happened to me this morning as well.
    Twice in 2 days and im a little worried I did something wrong during Assembly of the laptop or something. Any ideas? Or do I keep accountant with the above solution?
    Looks like a mess of power upwards of sorts.

    Thank you in advance.

    Hello

    I assume that this question has not happened before you have disassembled the laptop. Right?
    To be honest this similar issue happened to me to. The portable light not (black screen) after I'm entered in the mode 'sleep'. However, this happened only once

    It s hard to tell why this happened to you it of not impossible that you have damaged something for disassembled the procedure.

    However, the fact is that the warranty is not valid more because you opened the laptop. That is why any approach (especially parts replacement) to solve this problem would cost money.
    So ultimately it s your decision: a technician visit to downtown to see the pieces of equipment or keep your stay with the workaround mentioned above.

  • Satellite A110 - does not start

    Satellite A110 does not start on power, but the HD load no start fan display running, but in a few seconds it stops.

    Help, please

    Hi jinskywalker,

    No display?
    No beeping?
    Nothing?

    In this case, you should read this article:
    [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  • Satellite P300 does not start immediately

    Hello

    My Satellite P300 does not start immediately. I have to press the button start ca. 20 or 30 times.

    No results?

    Hello

    I have the Satellite Pro P300 in front of me. I use it almost 4 weeks now and I press the Start button, very gently and keep it down to the second or two and laptop starts fine everytime I want to start it.

    Do not press the button quickly several times but slowly and keep it down for a second or two.

  • Satellite L655 does not load

    Hello

    My satellite L655 does not load, BUT it works fine when I charge the battery of my second toshiba laptop
    also does not open when I plug just the charger without the battery (led power 3min.from-no at all)

    charger works fine
    battery works very well
    tested on my other toshiba

    It works when I plug a charged battery ready.

    Any guys help?

    > It doesn't work when I plug a charged battery ready.

    It seems that there is a problem with electronic control gear.
    I mean that the laptop does not work even if plugged into the sector.
    It is certainly a problem given that all laptops would work without battery connected but connected to the power outlet.

    So I think there is a problem with the electronics which is part of the main map.

  • Satellite A660 does not remember passwords

    Please help me!

    My new Satellite A660 does not remember passwords that I ask him to remember (via these majiggers checkbox in the info boxes) and some sites tell me that my time is incorrect when it seems correct system!

    I can't use "Remember me" when I connect to facebook, it tells me that I have to be logged in to see this page, but if I do not remember me I can connect fine...

    If I type my e-mail and ask the site if in memory, it can't remember!

    I use Google Chrome
    Running win7 home premium 64 bit
    with a processor intel i7-2630qm
    6 GB of ram
    INVIDIA GeForce 540 m
    Intel HD graphics family

    In addition, the a660s do not have the same characteristics?
    Thanks for your time.

    Hello

    Using google chrome?
    Change to Firefox or IE and check if the same question would be available using other internet browsers.

    I guess that it s a matter of Google Chrome.

  • Satellite M50 does not supply power to the top

    Hello

    My laptop Satellite M50 does not supply power to the top. The laptop itself is working fine, but I can't use it as the battery is discharged. I checked the cable ca and it seems ok. The laptop has a fuse internal which I need to check? If this is not the case, what should I do?

    Thank you.

    Hello

    If I understand you correctly you cannot use laptop with AC power only. Am I right about that?
    Switching between the block of AC power or the battery, do the power of electronic cards and there is not a switch so that you can check.

    When you connect your laptop to the power Jack is the power LED ON?

Maybe you are looking for