Satellite C660 - 1 d 7 - Wireless disconnects when not plugged in

Similar Questions

• Windows maintains a disconnect when not touched for 2 minutes

  Windows maintains a disconnect when not touched for 2 minutes

  Include adjustments of the screen saver turns on after only two minutes?  See control Panel\All Control Panel Items\Personalization\Screen Eve.  Otherwise have a look at some other similar settings in Options to control Panel\All Control Panel Items\Power

• Satellite P750 - Wireless disconnects when wake the portable computer from the 'standby mode '.

  Hey

  Today, my Toshiba Satellite P750 (running Windows 7) has been disconnected from my wireless network when I wake from sleep mode. When I close the lid of my laptop, it goes automatically into mode 'sleep', and when I open it, I put my user password and use it as usual. However for some reason any today, it does not work.

  When I wake up, it recognizes my wireless network is available, however, cannot connect to it. When I solve the problem, it indicates that there is a problem with my router and I should turn it off, wait at least 10 seconds and then turn it back on. I tried this and it works fine, but my laptop has never done that (in the few weeks I got it) and I wouldn't constantly reset my router to use Internet. In addition, I have another laptop at home that works very well.

  Should be really this issue be resolved quickly as I have exams this week.

  See you soon

  Hello

  Maybe there is a problem affecting the IP automatically once the laptop has been in sleep mode. It could also be another reason for it but it of always difficult to say which could affect wireless networking

  I think you should try to update the Wlan driver.

  Don't know exactly what you have but here the card Wlan, you can find all the latest WLan drivers available for Toshiba laptops:
  http://APS2.toshiba-tro.de/WLAN/

  Uninstall the old drivers first, after new reboot install new drivers downloaded for the wireless network card that is built in Notepad.

• Satellite C660 - 115 WLan connection only works when the power cable is connected

  Hello

  A few weeks ago, I bought a Satellite C660-115. I want to surf the internet anywhere in my house without any son/cables.
  On the first day, I had this problem: when I disconnect _power_ cable, the wireless connection will stop working.

  The Web page on my screen will always be there, but a new page loading is a problem.
  It is sometimes useful to recharge (by pressing F5), - sometimes not. It is always useful to "ip address of repair", but not for long.

  The only solution is to atach regardless of how much power the battery has still the power cord.
  When I do, it is no problem whith the connection at all.
  I went back to the store where I bought it, they related to their own wireless network and they have had the same problem after a few minutes. In the shop too attach the power cable solved the problem.

  So the problem must be in my lap top, not in my network (modem or almost).

  Doesn't this all seem familiar, and if so, how can I solve this?

  I hope that my English is understandable, I live in Holland.
  Thanks in advance!

  Here is the solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59177

  Change options for saving for the Wlan in Windows 7 power management

• Satellite C660 - WIFI connection lost after disconnecting the AC adapter / CC

  I have a Toshiba Satellite C660/C660D.

  I always connect to the Internet via the wireless connection. However, the laptop must be connected to the power supply. As soon as I unplug the connection drops.

  Any help / advice would be much appeciated.

  Hey Buddy,

  Please read this article. Normally it should help you:
  [Wireless LAN connection disconnects when the AC adapter is removed. | http://APS2.Toshiba-tro.de/KB0/TSB12033H0001R01.htm]

• Satellite C660 - the mouse pointer stops working when you start program

  Some features:
  Toshiba Satellite C660-1r1
  Windows 7 sp1
  Avast Antivirus (free version)

  Problem:
  When I start a program (for example. Sonos controller) on my laptop my mouse pointer stops working. It does not happen with all programs! When I go into Device Manager, my synaptic touchpad and my hid mouse is working also. When I press ctrl - alt - del, the pointer can move again, but when I come back it stops again. I have a work around is not a solution

  When I disconnect my windows account and log in again, it will solve the problem. When I start a program again the pointer will freeze up again.
  I did a complete system of virusscan and a pre start virusscan and my laptop is virus-free.
  I uninstalled the mouse and in drivers reinstalled synaptics them but that has not worked. I added a new account windows but that did not work.
  By pressing the keycombo FN + F9 has no effect.
  I am somehow at the end of my ideas...

  Can anyone help!

  When I start a program (for example. Sonos controller) on my laptop my mouse pointer stops working. It does not happen with all programs!

  This problem happens using the touchpad only or have you noticed the freezing of cursor using the external USB mouse too?

  What is the notebooks touchpad works properly without loading and using this 3rd party software?
  For example, work the touchpad with Microsoft office (Word, Excel, etc.) or navigation in internet by using IE or Chrome?

  My guess is that the pre-installed 3rd application part could affect the functionality of the touchpad.

• Satellite C660 - no internet access via WLAN when powered by the battery.

  Hi guys,.

  Just bought a Toshiba Satellite C660 and went through the installation process and everything seemed simple and easy. However, this changed when I tried to use the laptop wireless. As long as I fed it with the AC adapter, all right. When I remove the adapter I lose the internet connection for about 3-5 minutes before it reconnects for about 1 min. Then, he constantly repeats the cycle.

  I have a strong signal that shows as "Connected" to my wireless network in the network and sharing Center, but get the message "no internet access. I have another laptop and PS3 connected to my network wireless without any problem. I disabled them both where they do not interfere with the signal, but that made no difference. Therefore, I am sure that's not the router, the modem, or the wireless signal.

  I checked to see if my WLAN adapter needs an update to the driver, but it shows that I have already installed the latest drivers. I tried to change the power settings for the adapter wireless of "Maximum Performance" all this without success.

  In addition, it works fine on battery if plugged directly on the wireless router.

  Can anyone offer advice on how to fix it, before I return it to the store?

  Thank you

  Jason

  Please take a look in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59879

  There is a similar discussion on this theme.
  So to change the power management settings and the installation of the new driver Wlan has solved this problem.

• Satellite C660-1ME - sometimes more often hangs when connecting to internet

  Hi, my laptop is Satellite C660-1ME

  It blocks sometimes more often while connecting to the internet, and several times when I m working in eclipse IDE.

  The shot is so that everything is locked, same mouse doesn't have a movement and Ctrl + Alt + Delete does nothing and finally I have to hold the power button until it has adjusted or pull the power cable on.

  Everyone this experience or know where is the problem?

  Hello

  The description of your problem is too general and it is not easy to understand what exactly you do.
  Connection of internet statement is not easy to understand. Who knows what kind of connection use you page your visiting or whatever you usually do.

  Have you noticed this problem on the first day?
  Are you using the original OS that you got with your laptop?

  Where to start our discussion?

• Satellite C660 - 1LTD Strange grinding / vibrating noise when I watch videos

  Hello

  I'm new and I have a laptop series Satellite C660-1LD.

  Sometimes when I watch videos, there is a short sound of a noise and the best way to describe a vibration, grinding noise. The noises are not persistent, they come in short explosions.

  Sorry for the wrong description.

  Please can someone help?

  I'll be happy to give you any information you might need.

  > Grinding not strange all sounds far more

  Thanks for your comments and good to know that solve you the problem.

• Wireless network connection disconnects when you plug in the charger and the error message "no connection available or limited connectivity.

  Original title: wireless computer does not work when plugged in and load, why?

  have a laptop Windows 7 who had originally installed XP. I have not changed anything inside her, but suddenly one day any time, I have the unit plugged my Ethernet and wireless turns off. As soon as I unplug it, the computer note immediately that there is a wireless card and connects.

  
  

  The computer has never done this until two weeks ago. It works just fine when unplugged, but still once, as soon as I plug it in it disconnects and States they has "No connection available" or "limited connectivity". I started seriously annoyed because it's my main laptop and I must wait for it to load in order to do something with him for an extended period of time.
  The device information:

  > Ze2000 HP (Pavilion series)
  > Original OS: Windows XP Home Edition
  > RAM: 512 MB
  > 100 GB hard drive
  > AMD Turion 64 Mobile Technology ML-34
  ___________________________________________________________________________________________________
  I can provide information. No errors appear in the error log or event viewer and I made backups and reset 3 times in recent weeks.

  Hello

  I appreciate your efforts to solve the problem.

  This problem may occur corrupt or incompatible drivers, missing updates or because of incorrect network connection settings.

  Are you having the same problem when you use the configuration of a network connection?

  I suggest you to check if there is no wireless or mobile network\devices which can interfere with the wireless network and remove if there is.

  Method 1:
  I suggest you to download and install the latest network driver on the manufacturer's Web site and check if it helps.

  Check out the link:
  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=442888&TaskID=135

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 3:
  If the problem persists, I suggest you to check that your device is allowed to the computer.

  a. click on start and type Device Manager in the box start the search .

  b. open the Device Manager and expand network adapter.

  c. right-click on the network driver and click Properties.

  d. click the power management tab.

  e. uncheck all options.

  f. click OKand then click OK again.

  See the article and check if that helps.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-Internet

  
  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

   

• Satellite C660 - key FN and wireless network detection no longer works

  Hi people,

  As a result of a virus, I put my computer to its factory settings.

  I have however lost the use of the function fn (end?) of the keyboard since and therefore cannot control the lighting of the screen and so on via the F keys any longer.

  Also, my computer can not detect wireless networks more. I did all the required updates and checked the State of the wireless card, but still nothing.

  Any ideas?

  See you soon!

  Hello

  May I ask what system you have installed on this laptop?
  Is - this Windows 7?

  If you are using Windows 7, you need to install Toshiba Value added Package and Support Toshiba Flash Cards for utility work affects FN.

  I m nit course on the WLan driver because different C660-xxx supports various wireless network cards. Perhaps you could provide the name of the complete model of the C660-xxx
  This would facilitate the search for the Wlan driver.

• Satellite C660-26z - Intel graphics driver update is not possible

  I have a Satellite C660-26z. I try to use Trimble/google sketchup (3d modeling program) but keep an error message "Bug splat."

  Google suggested that I up date my permit, when I try to update from Intel, I get an error message telling me it was modified by the Assembly of the computer and communicate with them.

  My driver is Intel(r) HD Graphics Version = 8.15.10.2189
  The program works fine on my other computer 5.

  Any suggestions?

  Hello

  We know that you can not use drivers provided by graphics card manufacturers. Not for laptops. Display drivers are changed by laptop manufacturers to provide the balance between performance and protection of the equipment.

  What you can try is to check if Toshiba offers a newer driver for new models of portable computers.
  Please check on the Toshiba download page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
  If you can find new display drivers for:
  Satellite L775 (PSK6DE)
  Satellite R700 (PT314E)
  Satellite Pro U630 (PSK01E)

  Please post comments.

• Satellite C660-108 - Windows XP Home Edition does not install

  I try to install Windows XP Home Edition on a Toshiba Satellite C660-108, without success.

  I changed the BIOS disk in "Compatibility" mode (what is the same thing as "Legacy IDE"?) by following the instructions on a Yahoo Answers question on the same issue.

  What has improved the situation, in what I now get an error message a few minutes after installing XP said "Starting Windows" instead of immediately after. The error message is the same that I have already received and is as follows:

  "A problem has been detected and windows has shut down to prevent damage to your computer...". "Technical information: * STOP: 0x0000007B (0xF78D663C, 0xC0000034, 0x00000000, 0x00000000).

  Thanks in advance for any help,

  Luke

  PS - I'm a mac user and do not have much experience in the use of Windows laptops, so I need instructions spelled out clearly enough if possible.

  The error could be related to drive HARD and the setting in the BIOS of the controller...
  Probably, you need to install Win XP using SATA AHCI mode and to add the driver SATA as described here:

  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm
  http://APS2.toshiba-tro.de/KB0/SPD4603LT0000R01.htm

  I found a similar description in the MS forum:
  http://answers.Microsoft.com/en-us/w...4b511ed?auth=1

• Satellite C660-1JH: problem of USB device - software not installed

  Having had several attempts trying to install different software, Microsoft Fixit program has scanned and found that my PC has loopholes with USB points.

  The screen read: "the software device driver is not properly installed. Please consult the manufacturer of your device to help get this device installed.

  It also sets out the following...
  'Intel(r) ICH9 Family USB Universal Host Controller 2936.
  'Intel(r) ICH9 Family USB Universal Host Controller 2939.
  'Intel(r) ICH9 Family USB Universal Host Controller 293C.

  No idea how I can fix this please?

  Computer is Toshiba Satellite C660-1JH.
  Operating system is Windows 7, 64-bit.

  Hello

  Try removing the USB ports and hubs from Device Manager.
  Restart the device and wait Windows OS has reinstalled all USB controllers once more.

  If this is insufficient, the chipset driver update because driver chipset controls the USB controller.

  Here you another thread on chipset driver;
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=249306

• DeskJet 3520 disconnects when not used for a while

  The printer goes offline when not in use. WiFi is BT HomeHub3. Manager hub has no reference to the Mac filtering, which is the error message on the wireless network test result.

  Printer does not keep the wireless connection.

  http://support.HP.com/us-en/document/c02817031

  Step 6 to set the static IP address.

  You will need to read the manual of your router and learn more about it to check the beginning and end DHCP IP for the router.