Windows maintains a disconnect when not touched for 2 minutes

Similar Questions

• DeskJet 3520 disconnects when not used for a while

  The printer goes offline when not in use. WiFi is BT HomeHub3. Manager hub has no reference to the Mac filtering, which is the error message on the wireless network test result.

  Printer does not keep the wireless connection.

  http://support.HP.com/us-en/document/c02817031

  Step 6 to set the static IP address.

  You will need to read the manual of your router and learn more about it to check the beginning and end DHCP IP for the router.

• Windows 7 Pro will be not updated for Windows: fails with the error code 1 (0 x 000000000000001), which is a problem of language pack, version __Pro DON 'T SUPPORT SEVERAL LANGUAGES '.

  Windows colleagues for support.

  My windows install/windows update is broken; There will not be security critical update, installers fail with the error

  code 1, indicating a problem with language packs; I use widows 7 pro for software development.

  Several lanagues packs are not part of windows 7. should I upgrade to ultimate for your problem?

  More sophisticated repair attempt, SFC/scannow indicates corruption, but cannot fix it.

  Hand, install the update package out of work.

  Your opinion is welcome. I have

  Hey Hey Hey Doc K whadu say?

  I solved my problem;

  the problem was owner and permission on my programs, all users, the program data and my programs (86).

  As I type this i / m re - run SFC/verify only and a big pile of sucessfully some updates installed.

  What have I done? I took possession of the special directories above from "TrustedInstaller".

  Even when owned by TrustedInstaller, it does not have permissions. Some places I found rejection specific to the owner of the network.

  -What happened? Do you have a trusted Installer get stuck Mid-install?

  I took possession of SYSTEM, and made sure the CREATOR had every right, as in the SYSTEM and

  USER, AUTHENTICATED USER. I was perhaps too broad.

  I took possession, and then all of the repressed, updates windows are presented themselves to install,.

  and I expect /VERIFYNOW SFC before as I mark this as running.

  I'm fairly certain VS2008 and VS2010 now repair and install.

  Hmmm... always to see funny error message in SFC...

  We need a tool to give an overview of a directory tree ownership and permissions.

  dB

  Hey Hey Hey Doc K whadu say?

• Windows 7 = high latencies no = not ready for players online?

  The true is that these two changes will not work with windows7 I encounter the same problems of lag that I had until I got disabling the nagle algorithm and tcpackfrenquency resulted as expected in Windows 7, so that "online players", we live a latency high with this OS (windows 7 rc1) in games like World of Warcraft (12 million users) , Aion (8 million testers), Vanguard: Saga of Heroes and EverQuest II. So my question is this, how can it improve our time of latency levels that we are able to do so in windows vista and XP afer applying patches.

  Could someone tell me, why windows7 is not ready for the games online "mmorpg"?

  I tried every single problem I found online and still nothing... I have the latency of 400-500 on average, before with XP I had the average of 100-150 Ms.  Something wrong with Windows 7!

  Don't get issues with BF2 online under Win7 64 bit. Looks like some of your material my have problems with Win7. You have the latest drivers for everything? If you can't find the drivers Win7 using Vista.

  Given that most of us is online games with Win7 without problems, it seems that the problem is on your side.

• Windows Update download but does not install for XP Pro SP3 - receives the 800704dd error Code

  Reinstalled Windows Update agent, wups2.dll recorded, tried to use Microsoft Fixez_ the (claimed he fixed), but none of this seems to help install updates for over a year now.  Here is a copy of the last part of my WindowsUpdate.log.  Any help would be most appreciated.

  -----------
  2012-05-10 13:01:10:357 4804 12e8 COMAPI - ServiceId = {7971f918-a847-4430-9279-4a52d1efe18d}
  2012-05-10 13:01:10:357 4804 12e8 COMAPI - AuthorizationCabPath = C:\WINDOWS\SoftwareDistribution\AuthCabs\muauth.cab
  2012-05-10 13:01:10:373 1108 1770 Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
  2012-05-10 13:01:10:373 1108 c4c Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
  2012-05-10 13:01:10:389 1108 c4c Misc validation signature for C:\WINDOWS\SoftwareDistribution\AuthCabs\Downloaded\7971f918-a847-4430-9279-4a52d1efe18d.auth.cab.temp\muauth.cab:
  2012-05-10 13:01:10:404 1108 c4c Misc Microsoft signed: Yes
  2012-05-10 13:01:10:498 3084 ACC Misc = logging initialized (build: 7.4.7600.226, tz:-0500) =.
  2012-05-10 13:01:10:514 3084 ACC Misc = process: C:\WINDOWS\system32\wuauclt.exe
  2012-05-10 13:01:10:514 3084 ACC Misc = Module: C:\WINDOWS\system32\wuaueng.dll
  2012-05-10 13:01:10:498 3084 ACC DtaStor update service properties: registered with AU service is {7971F918-A847-4430-9279-4A52D1EFE18D}
  2012-05-10 13:01:10:576 4804 12e8 COMAPI - added service, URL = http://update.microsoft.com/microsoftupdate/
  2012-05-10 13:01:10:576 4804 12e8 COMAPI - COMAPI: IUpdateServiceManager::RegisterServiceWithAU -.
  2012-05-10 13:01:10:576 4804 12e8 COMAPI - ServiceId = {7971f918-a847-4430-9279-4a52d1efe18d}
  2012-05-10 13:01:10:576 1108 c48 Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
  2012-05-10 13:01:10:607 4804 12e8 Misc = logging initialized (build: 7.4.7600.226, tz:-0500) =.
  2012-05-10 13:01:10:607 4804 12e8 Misc = process: C:\Program may Explorer\iexplore.exe
  2012-05-10 13:01:10:607 4804 12e8 Misc = Module: C:\WINDOWS\system32\muweb.dll
  2012-05-10 13:01:10:607 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-05-10 13:01:10:732 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:10:795 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-05-10 13:01:10:810 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:10:857 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wuident.cab:
  2012-05-10 13:01:10:889 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:10:951 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wuident.cab:
  2012-05-10 13:01:10:951 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:11:154 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wsus3setup.cab:
  2012-05-10 13:01:11:170 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:11:264 4804 12e8 Setup * configuration: check if it is necessary to update *.
  2012-05-10 13:01:11:264 4804 12e8 Setup * Inf file: C:\WINDOWS\SoftwareDistribution\WebSetup\wsus3setup.inf
  2012-05-10 13:01:11:295 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\wuweb.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:295 4804 12e8 Setup * IsUpdateRequired = No
  2012-05-10 13:01:11:295 4804 12e8 Misc = logging initialized (build: 7.4.7600.226, tz:-0500) =.
  2012-05-10 13:01:11:310 4804 12e8 Misc = process: C:\Program may Explorer\iexplore.exe
  2012-05-10 13:01:11:310 4804 12e8 Misc = Module: C:\WINDOWS\system32\wuweb.dll
  2012-05-10 13:01:11:295 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-05-10 13:01:11:310 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:11:342 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-05-10 13:01:11:342 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:11:373 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wuident.cab:
  2012-05-10 13:01:11:373 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:11:435 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wuident.cab:
  2012-05-10 13:01:11:451 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:11:451 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wsus3setup.cab:
  2012-05-10 13:01:11:467 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:11:529 4804 12e8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\WebSetup\wsus3setup.cab:
  2012-05-10 13:01:11:529 4804 12e8 Misc Microsoft signed: Yes
  2012-05-10 13:01:11:545 4804 12e8 Setup * configuration: check if it is necessary to update *.
  2012-05-10 13:01:11:545 4804 12e8 Setup * Inf file: C:\WINDOWS\SoftwareDistribution\WebSetup\wsus3setup.inf
  2012-05-10 13:01:11:701 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\cdm.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:701 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\wuapi.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:764 4804 12e8 updated configuration NOT required for the C:\WINDOWS\system32\wuapi.dll.mui: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:764 4804 12e8 configuration NOT required for C:\WINDOWS\system32\wuauclt.exe update: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:764 4804 12e8 updated configuration NOT required for the C:\WINDOWS\system32\wuaucpl.cpl: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:826 4804 12e8 updated configuration NOT required for the C:\WINDOWS\system32\wuaucpl.cpl.mui: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:826 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\wuaueng.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:889 4804 12e8 updated configuration NOT required for the C:\WINDOWS\system32\wuaueng.dll.mui: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:889 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\wucltui.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:935 4804 12e8 updated configuration NOT required for the C:\WINDOWS\system32\wucltui.dll.mui: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:11:935 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\wups.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:12:014 4804 12e8 configuration NOT required for the C:\WINDOWS\system32\wups2.dll update: target = 7.4.7600.226, required version 7.4.7600.226 = version
  2012-05-10 13:01:12:014 4804 12e8 Setup * IsUpdateRequired = No
  2012-05-10 13:01:12:217 1108 1770 Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
  2012-05-10 13:01:12:232 1108 c4c Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
  2012-05-10 13:01:56:217 1108 c48 Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
  2012-05-10 13:01:56:217 1108 1770 Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0
  2012-05-10 13:02:39:218 1108 1770 Service WARNING: GetUserTokenFromSessionId failed with error 800704dd for the session 0

  Problem has been resolved.  The permissions on the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\Notify\SensLogn had to be reset.  This enabled the settings of this key be restored and Windows Update works now.  I suspect that this problem occurred initially because of a crash of an Acronis image training program that was causing problems.

  Thanks for your reply.

• My "windows update" says he can not search for new updates-error code 80070002. Help, please. Thank you!

  I already tried ideas to stop the Windows Update Service, removal of temporary files to update and restart the Windows update service.

  Hello

  Have you made changes on the computer before this problem?
  Follow these methods mentioned below and check.

  Method 1:
  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:
  a. Click Start, type services.msc without the quotes and press ENTER.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in startup type, select Enable.
  e. Click Start under the service status.
  f. click OK.
  Repeat steps c through f for the following services:
  Background Intelligent Transfer Service
  Cryptographic services
  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.
  Method 2:
  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus software. Check out the following link.
  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Method 3:
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
  Method 4:
  I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem persists. Read the following article.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  See also:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions
  It will be useful.

• Peripheral PnP USB - muted, is unplug sound when not touched, "device not recognized" or a malfunction, etc...

  Here is an exhaustive list I hope what happens (it's the Microsoft forums, so I think you guys are going to read a lot of information):

  • The sound on my PnP USB audio device cancels randomly without any reason. It is not to be touched at all, and often happens when I'm even not listen to all the sounds.
  • Before he died, it emits a blur in the helmet noise as it is to be disconnected or the cord is cut or something. I have to unplug it and plug it back several times to make it work.
  • It has been for several months, working properly, this month started anything, for about a week.
  • I can't use my headset because it is loose. I had the USB key to solve this problem, because it's too expensive get taking fixed. I did not buy the device at first hand, I got it from a family member who took my laptop in for repair and the guy he recommended and we sold two of these jacks.
  • When it goes off during a game, I can't sound to return. Sometimes I can fix it on a game (as Portal 2, for example) by going to options and change the type of sound (or any) what's called it headphones to speakers, then back to the helmet. However, the game freezes often when the sound goes off and I have to remove the usb key, and in this case the game should also be repeated. In addition, everything has sound options like that.
  • This happens randomly, but it tends to happen every five minutes or every few seconds, and coincidentally it almost always happens during a loading on a video game screen.
  • It is not always give me a warning sound, especially on the games. He's just quiet.
  • Device Manager does not display a point of exclamation or question marks next to any audio device and the key USB pnp is indicated correctly. In the options of the sound in the Control Panel, there is of the sound bars next to the USB key that indicates that his is read, but it is not in playback mode. The USB pnp is listed as default device, so don't tell me to do. The microphones are turned off as well.
  • It does the same thing in all my usb ports.
  • The driver is up-to-date and meant for Windows 7.
  • I do not install the Windows updates. Updates are bad.
  • Box for what he calls a "USB stereo Audio Adapter external" StarTech.com, or "ICUSBAUDIO". It came with a disc that I used to install the driver, and I went on their website to get one for Windows 7 specifically and installed.
  • I use a computer laptop 64 bit Windows 7. In Device Manager, there are three things listed under sound: Realtek High Definition Audio Intel (r) display Audio and USB PnP Sound Device. None of the USB devices have exclamation points.
  • For the first time today, when the usb unplug sound, my computer tells me "Device not recognized" and said it could have malfunctioned. When I clicked on it for more information, he said that he could not tell me what the usb was even because it was not plugged in, which was not true. I also had a window appears which has tried to install the device driver (already installed) and then was told that the unit had been disconnected before he could do (not true). It just happened, for the second time today a few seconds ago.

  Hello

  Check out the link and run the Fixit and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Install the Windows updates as some updates can fix a problem.

  As you mention that the computer is second hand troubleshooting accurately would be difficult. I suggest you contact the manufacturer. Check out the link.

  http://www.StarTech.com/support

• Windows Media Center opens when I touch ANY key on my keyboard.

  I am running windows vista and cannot touch ANY key on my laptop keyboard without opening windows media center. I have a separate keyboard connected to a usb port, and that works.

  Hello

  1. what happens if you use the keyboard to the screen on the computer?

  2. What is the brand and model of the keyboard?

  Method 1:

  I suggest that you check test the issue with the keyboard on the screen by making sure that the external keyboard is disconnected from the laptop.

  Type without using the keyboard (on-screen keyboard)

  http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard

  Method 2:

  I suggest you to update the keyboard drivers and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know if it helps.

• Impossible to reinstall windows 8 because they have not asked for the product key

  Hello I have a problem with reinstalling windows 8. After I clicked on install in the install Start menu, he directly windows configuration without request product keys or request for adjustment of the score. While she has put in place, he suddenly stopped and said that product keys do not correspond with windows image, something like that and asked to enter the key to product again. When I clicked OK, it just goes to the main menu. He never gave me a chance to key in my product key.

  What should I do now? Help me!

  8 Windows preinstalled on your computer or you bought Windows 8 separately?

  If your computer is pre-installed with Windows 8, you must use the recovery partition to reinstall.

  If you want to reinstall Windows 8, which means remove applications and personal files and settings, you can use the reset and refresh. This is equivalent to a clean install.

  To do this, follow these steps:

  · Press the Windows key + i on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  
  

  · Click change PC settings

  
  

  · Click general in the left column

  · In virtue remove all and reinstall Windows, click Start

  
  

  Then follow instructions that will be provided on the screen to reinstall Windows on your PC.

• Windows Server 2008 OS is not acceptable for Officejet Pro 8500 has more

  I am installing an Officejet Pro 8500 has more on a network that contains just a Windows Server 2008 R2 (64-bit) computer and a bunch of zero clients.  I read the document "installation of the software of the printer on Windows Server 2003 or 2008" including the updated title hope in my heart.  Unfortunately when I followed the instructions to install from a. MSI file, I get an error message saying "this computer's operating system is not supported", as can be seen in

  https://www.dropbox.com/s/oi3ur31frg8dhi3/HP%20error%20via%20MSI.PNG

  I am able to print to this device I have widower of drivers from Microsoft Update, but I want to be able to scan with it.

  I solved this problem by installing the complete package on a Vista laptop then set up a network folder on the server for the scanned images.  I then unplugged the laptop from the LAN and now I can scan using the front panel of the printer/scanner and images appear on the shared folder of Server 2008.

• Product key Windows vista family premium is not valid for activation?

  OK, thanks for that. You want to mean by clean install, format the drive, then install again installation dvd or tell you since the recovery disk that is created as a separate on my laptop drive. And, if I clean install on my laptop, it will ask to enter the product key during installation?

  Both the Dell recovery disk and partition recovery integrated automatically reformat the hard drive and return the machine to its original state of delivery (at least in theory) - should all have integrated the manufacturer key and requires no key when installing, please write. The integrated partition is probably the best to use in a first time - this is the fastest and less hassle.

  Remember to backup ALL your data to external storage first, as with will wipe away the C: partition and can erase any other partition on the hard drive as well.

  The system is designed for scoped him key to the manufacturer, given three things

  (1) the appropriate key

  (2) the right table SLIC in BIOS

  (3) certificates/licenses well integrated in the software.

  -in your case this system is broken somehow, perhaps following an attack of malware, or a faulty program or "accidental damage" of the software. The key and SLIC table is still OK, but somewhere the ability of the operating system to properly access licenses collapsed - either licenses are missing (unlikely) or the registry has been damaged so that the OS is looking in the wrong place, the wrong information or (or looking at all!).

• Satellite C660 - 1 d 7 - Wireless disconnects when not plugged in

  I had problems with the wireless on my C660 - 1 d 7 croissants. Every time I take it off the sector, drops wireless and I have to connect to Ethernet, which kind of takes the whole point far from mobile.

  I've updated the drivers on the system to the most recent (from the toshiba Web site) and yet he falls again. That it becomes embarrassing that I work from home, so VPN loaded, so whenever I lose the net, I have to keep logging into that, that takes away the time. I also use a VOIP phone that will again cut.

  Wireless LAN is Realtek RTL8118CE

  Can anyone help as its driving me potty.

  Hello

  This has been discussed many times here.
  Visit the Wirelles forum.
  The solution;
  -updated the BIOS to the latest state
  -update the WLan driver
  -Disable WLAN energy saving in Win 7 power management.

  Welcome them

• Key 3 C often does not work for several minutes after the start, the other keys work fine.

  I got am HP Pavilion 17-e049wm Notebook PC product #E0J75UAR for about 4 weeks now.  I bought it refurbished.  A week ago I started having this problem.  3, e, d and c keys do not work when I first start the computer all of the other keys work.  Nothing happens when they are pressed.   Sometimes I will restart the computer and they work again, other times they won't, but often will start working if I left the computer set for about five minutes after the start.

  The computer is spotlessly clean.  I've only used a dozen times or more.  Nothing has been spilled on the keyboard.

  Sounds like software for me, but what?

  I am running Windows 8.1 and no programs are running at startup, with the exception of a program start button, but the problem began weeks after installing that.

  Any ideas?

  FWIW, I called hp. They believed excluded material and had me do a full system restore. Problem persists... The things you own end up owning you they say... I guess it's doubly true if you own a hp laptop. Full day turned... One day closer to death. Thanks Obama.

• Why my lap top freezes up when left idle for 10 minutes?

  If I leave my lap top about 10 minutes of inactivity. it freezes and I have to start soft to get unfroozen. What could be personal watercraft this? Help, please

  Hello

  1. Since when are you facing this problem?

  2. have you made changes on the computer recently?

  3. what version of the Windows operating system is installed on your computer?

  Usually, this type of problems can cause due to third party applications.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try to check and clean boot if this can help.

  How to solve problems using the boot in Windows 7: http://support.microsoft.com/kb/929135 
  Note: once the diagnosis has been made, make sure that you try to step 7 of the article to reset the computer as usual.

  Method 2:

  Try to change the power management and check if it helps.
  Change, create, or delete a power plan (scheme):
  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  Method 3:

  Try to check the drive for errors and check if it helps.

  Follow the steps to complete the disk check:

  a. click Start, type Command Prompt, right-click on it and select run in as long as administrator.

  b. in the command prompt, type chkdsk volume: /r /f and press ENTER to verify and repair volume disk errors or present bad sectors on the disk that could cause this problem.

  Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Reference: http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors

  Hope the information is useful, if no answer to we return.

• DW cs5 (not responding) for 5 minutes or more, other problems

  • If I do a manual my machine virus scan, the minute the scan begins, dw becomes locked and MISTLETOE refuses to redraw and one might even say (not answer).

  periodically for some unknown reason, (seems to be ANY disk access by some background app?) usually dw freezes during this time about 5 minutes after the drive is over.  Sometimes it is shorter, but usually aren't.

  • in all dw cs5 models included, UTF-8 charset (should be capital to meet the w3c validation) is utf - 8.
  • < script > < / does not close the tag html5 Pack.  or anything with SVG or MathML, which are part of HTML5.
  • the complete set of the css3 modules and the CSS 2.1 specification are not supported in the HTML5 pack.  I would like to do some tests of browser.  I also want my investment in the future!  not to do just what is.
  • all of the tags HTML5, attributes, entry of items types according to the standard w3c are not included in Insert, portion of the tag from the menu in the HTML5 pack.
  • highlighing syntax for javascript clearTimout() is different from the syntax for setTimeout().
  • syntax highlighting is not done correctly for situations where there are 2 /'s on a line in javascript, as when there is math (division) and / / end of the line.  It's bad lexed as a regular expression.  It really bothers me when I'm coding.
  • There must be a fixed refresh button to reinterpret code/code + design/design view when changes have been made and something is not as a failure of refreshment, or when a problem has been fixed and you would like to see if any broken left tag dw.
  • functionality in dw you set in prefs which is supposed to 'correction with missing/incompatible labels documents' and other does that. He made a lot of noises that she does, but never does anything everything except throw a dialog box.  I want to fix the document as I told him.  broken functionality.  as it is, I do a lot of assumptions as to where those broken tags are, because dw to highlight either.   I designed an algorithm that I use in my program bracematcher to https://sourceforge.net/projects/bracematcher/ interest you that marked the orphans of the opening tags and closing.  I'm sure you can do it yourself, it takes just knowledge of recursion and stack and using the == and! = It's very simple.  Thought I might even be able to rewrite my program to work with labels, which would make it an even more exciting program.  the lexer and manipulating strings is the hardest part, and HTML is weird with ropes on the attributes.  I really need to do since dw is not highlighted my problems of tag.  at least I can get a detailed report of the problems with my tags.

  McAfee & Norton are notorious resources hogs. No matter how much memory you have, they will take over your computer. And they frequently cause other apps slow down or stop responding until the VA finishes everything he does.   I'm so bored with the AVs albums that I actually considered not using any at all.  Finally downloaded MS Security Essentials.  It's great! No more intrusions or memory leaks.

   I think "the cloud" is highly overrated.  expensive during these times.
  

  At the beginning I thought also, but at closer look, Creative cloud looks more like a victory, victory for multiple users of the product. Where else can you find 17 products for the price of the intro to $29.99 / month?

  RS-30month-introductory-pricing-on-creative-cloud/ http://9to5mac.com/2012/04/23/Adobe-officially-Launches-CS6-suite-offe

  Feel free to post your requests for features below:

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/