Satellite C660D recharge after recovery

Similar Questions

• Satellite C660D-153 - after system recovery bootmgr is missing

  I did a complete system restore on my satellite c660d-153 and he says now that the bootmgr is missing at startup. My laptop did not come with a boot disk, so I'm not sure on what to do. Help, please!

  All you can do right now is to try to do it once more.
  For more information, see http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm

• Wireless on Satellite C660d-14W after clean instalation of Win 7

  Hello

  I bought a toshiba satellite c660d-14w off the coast of a friend and reinstalled a fresh copy of windows 7 x 64.
  After installation, the laptop does not recognize any material (graphics, wireless network card, sound) so I slowly tried to install all the drivers for all.

  However, no matter what I install for the wireless, it just doesn't seem to work.
  Installed the driver from realtek RTL8188CE, driver lan wireless on Toshiba website and have set the network connections service car and restarted it and still nothing.

  In the Manager of peripheral devices, network cards, I have two entries:

  Realtek PCIe FE Family Controller
  &
  Realtek RTL8188CE WLAN 802.11n PCI-E NIC

  Suffice to say that they are working properly and have the latest drivers but I have no wireless access, does not display the icon in the status bar, and I just get a generic windows error message when you try to configure it manually.

  Help, please!

  Yes, the wireless network card seems to be properly recognized in Device Manager.
  The Satellite C660C-14W supports the Realtek RTL8188CE WLan chip.

  You said you do not have access to the WLan
  Did you check the availability
  Control Panel-> network sharing Center-> the settings of map (left)

  Here, you should see the wireless network card
  Is - this visible?

  If Yes, go to properties and uninstall the TCP/IPv6 protocol and use only TCP/IPv4

• Satellite C660D freezes after startup

  Hi all
  I've had my C660D for a couple of years now without any major problems arise. However, a few days ago I turned on all normal loading (the office completely), but the fan became very strong and the laptop froze and was insensitive.

  He continues to repeat this problem, it is usable for the best part of 2 minutes and then freezes again. I have managed to do the system restore and even taken apart to clear the fan on, but the problem still persists. I tried safe mode, but still get the same problem.

  Help, please!
  Thank you

  Hmm recommends to test the laptop as part of new memory modules.
  It might be possible that the gel is related to the problem of memory.

  Also a high temperature may cause issues such as
  If you didn t clean cooling in the past fans, do so using the jet of compressed air.

• Satellite 1900 shows a recovery on error message after reboot after

  My laptop Satellite 1900 305 after recovery uility, when commissioning for the first time shows an error message that indicates that the system has recovered from a serious error of a device. Can someone help me with this?

  Hello

  Well, it would be nice to have more information about your system. What operating system are you running currently installed Bios?

  This message appears again after a reboot?

  Good bye

• Satellite C660D 15F - black screen after startup

  Satellite C660D 15F

  Hi guys,.

  I have a big problem with my laptop. When I started to-go from sleep - two days ago I heard the computer starts normally but the screen remains black. No mater how many times I tried to restart, the screen shows nothing, no message no picture. The normal operation of the side light remains on but the keyboard lights stay offshore. I can hear the computer normally (the fan etc..).

  I tried to hit SHIFT F8 start buttom on the first night, and the image was on the first attempt when I started the machine and everything seemed normal again! The next few days, I got a black screen once more and the case never worked again, no matter how many times I tried.

  Can someone help me please get out of this mess? Has anyone had a similar problem? How do solve you?

  My machine is now exactly four years.

  Thank you very much for your ideas! I really need to access some files on there!

  Hello

  Disconnect the power and remove the battery. After doing this press the power for 30 seconds about and try to reset your machine. Leave it for a while and try to start with power current only.

• Cannot create a recovery on my Satellite C660D-1CU media

  Hello

  I have a big problem with my laptop, Satellite C660D-1CU.
  When I initially and then all the programs and Toshiba, and Toshiba recovery media creator this message is on display:

  It is impossible to create the recovery media.
  Can't find file recovery HARD drive on the second disc of the first hard drive. This computer has no valid environmental restoration of the hard drive.

  Can someone help me because I really need my pc back to factory settings because I have too many bugs.

  Concerning
  Nicolas

  Message was edited: assignment has been translated

  This problem occurs if the Toshiba Recovery creator tool cannot find the recovery image on the HARD drive. There are several reasons for this. Recovery image can be removed, deleted or structure of disk partitions HARD maybe changed. Just with the original settings and their State of origin HDD it will work.

  Unfortunately now you will be able to create a recovery media or the installation of HARD drive recovery.
  What you can do is a new and original for your model of laptop recovery DVDs and it is possible on https://backupmedia.toshiba.eu/landing.aspx

• Portable satellite C660D-151 - failed to open the HARD drive recovery program

  I can't start the recovery program HARD drive on my laptop of Satellite C660D-151 - 1B136799K model number - please can someone help me?

  Thank you

  John Davis

  Hello John

  Recovery installation is very simple and you can do it whenever you want. Important is that your laptop to factory settings. Simply follow the link posted by Feliks.

  If you've changed something else or clean installation of the OS, it will not work and for the installation of recovery you must use the original Toshiba Recovery DVD drive.

  If you have any other questions you are welcome.

• Partition lost after recovery - Satellite L30

  I had two partitions on my HD (Satellite L30-114).

  I used the Toshiba recovery Cd to restore windows back to my laptop. The CD has not offered me a full mode or an Expert as written here http://support.toshiba-tro.de/kb0/FAQ350072001GR01.htm he has just recovered without any input on my side!

  After recovery, Windows does not see my second partition. I used the disk management utility, and it is said there are 17 GB of disk unassigned space (this is my second Partition!).

  Can and how can I restore it?

  TX a lot!

  Hello

  It seems that the L30 comes with a new version of the recovery cd.
  I think that the recovery procedure is a bit different than the old with 2 different recovery modes (standard and expert)

  I know a little new recovery procedure because a friend of mine bought a new Satellite with this recovery CD. He asked me for the installation of the laptop and we checked.

  It seems that you must press the setting button after the language selection.
  If you n t use the button setting for the configuration if the recovery procedure will be remove and erase everything on the HARD drive. I think you didn't configure the settings and therefore all the partitions have been deleted.

  Unfortunately I think that there is not much to do. You the partition has been deleted and it of not possible to bring back the lost data.

• Satellite C660D - after update BIOS wireless card no longer works

  Hello
  Yesterday I Tempro message asking me to do an update to the BIOS: 'bios-20120601184846. I did but it was not reinstalled the wireless driver, and since my computer can't find any wi - fi network. I still have a working ethernet connection.

  I tried several ways to fix it and nobody has succeeded:
  -J' installed the driver "slate-driver-s1081-win7-wlan-1005.31.1222.2011".
  -J' installed from the toshiba Web site, the driver "realtek_wlan_win7_2000016L_20110523".
  -J' tried a system restore, but he made a mistake and did not work

  How can - I'm restoring my wi - fi connection?
  Thanks for your help.

  Technical information:
  Model: Satellite C660D - 104 Ref: PSC1YE-00Q001FR serial number: 3B097607K
  Wi - fi card: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC #2
  Windows 7 64 bit

  PS: Sorry if I don't speak very well, I'm not English.

  Hello

  This means the card WLAN is not listed in Device Manager?
  Some unknown device is listed in Device Manager?

  To be honest, this issue is not known to me but if it please try to set the BIOS to default settings and check again.
  I put t know if this will help but you can back up all your data and install again recovery image to check if the same problem persists with the factory settings.

• Satellite C660D (PSC1YE) black screen after BIOS update

  I tried to update my Bios on my Satellite C660D portable (psc1YE) last week (big mistake).

  Something went wrong during the update and now when I power on I just get a black screen (LEDS and fan).

  After reviewing, the conclusion is that I damaged the BIOS that must now be blind flashed.
  So I got the hand on a 512MB memory stick, formatted using FAT through windows XP and used Wincris to create a startup disk after you have added the file bios.rom (renamed Bios.wph) which I extracted the last update of the BIOS on the Toshiba site.

  My memory stick has three visible files on it, Phlash16.exe, bios.wph and minidos.
  I plug laptop with battery, DVD player and power disconnected to stick, and hold Fn + B re-connection cable cable, turn it on.

  The fan whirs at full speed, and the USB lights up and flashes then for a minute, as if being read. No matter how long I let on, the fan will continue whirring and the USB is on and when I unplug and put in still works a black screen.

  I tried different sticks, (up to 4 GB with FAT32 format), programs of different startup (for example, the HP utility) drive but still no luck.

  Can someone tell me what I do wrong? I tried to look for a newer version of Phlash16 just in case that was the problem, but can not find one any where (mine is version 2008)

  All advice would be greatly appreciated even if it's just to tell me that I'm wasting my time because the pc is not repairable.

  I can't tell you if you waste your time or not because I n know if the motherboard ROM module is OK or not

  In most cases, it should be possible to reflash the ROM module using the BIOS crisis disk but this disc is available to authorized Toshiba service technicians and as much as I know reflash this methods is not always the same

  However, in some cases it might be possible that the mobo could not be fixed by disk crisis, it would be the worst case

  I recommend you to contact a certified maintainer Toshiba to check guys would be able to use the crisis disk and could test whether its possible to reflash the module ROM
  Is it not would be not possible well in this case you would need new motherboard :(
  But lets hope do ' t you need...

• Satellite C660D-1F2 - black screen after BIOS update

  Hello

  I have download the Bios Toshiba by writing my serial number for my laptop.
  First I checked my current bios and it is 1.5 I think. The news was 1.60. I flashed on WIN 7 64 bit
  First he checked, he erased and then he wrote after the writing process, the laptop is a reboot automatically. But after that the laptop closed and propelled again, he stuck to a blank black screen. Fan, CD Rom, keyboard worked. I think too many USB because when I connect my phone to the laptop, my phones battery charge. Please I need help. I am out of warranty.

  What I've tried so far:
  Take out the battery
  Power cable plug out
  Hold down the power button / stop 1 minute
  Connect the power cable to rear
  Press the Power button
  Solution: Same; Black white screen

  Satellite C660D-1F2 (PCS1YE)

  Hello

  I'm afraid that something goes wrong with the update of the BIOS, and now BIOS is damn Mr. usually in this case you need professional help from Toshiba service but it can be quite expensive.

  On this forum, you can find many discussions where people have described the same problem. Some of them have been able to solve this problem. a very interesting thread, you can find here. Check it out please.

• Satellite M40X 299: no boot after recovery

  Hello

  I have a problem with my satellite M40. After a problem with spy software, I tried to format my pc.
  I did a restore of the system with the original cd. At the end of the mind, I pressed ctrl + alt + delete to restart as it was written.
  But nothing happens, I have only a cursor in the upper left corner of the screen and windows does not start. I did the operation 3 times and it's always the same result.

  I don't know what more I can do.

  Thanks for help.

  Excuse me for my English

  It's very strange. Can you get the CD of Microsoft facilities and try to install the OS? I'm really interested if the same thing will happen again.

  Please don't be crazy on me because I t n wrote a few exact explanation but after recovery without end I've done in the last 8 years I have never seen anything like it.

• Satellite C660D white screen after BIOS update

  I ran the update of the BIOS on laptop Satellite C660D PSC1YE recommended and he appeared to succeed, but when it restarts the screen won't turn on. I tried a few things to fix, but nothing worked.

  Tried:

  • connect an external monitor via VGA - white too
  • remove the battery of the CMOS button
  • removing a hard drive startup, to replace again
  • a short-circuit the J1 jumper under RAM slots

  What else can I try?

  Here is the windows bios update program:
  http://Support1.toshiba-tro.de/Tedd-...0601184846.zip

  Try to start with the battery.

• Satellite C660D - after updating the BIOS, WiFi no longer works

  Hello
  I have to post my message again, my old account was deleted because it bore the name of Toshiba inside.

  Here's my problem:

  I have a Tempro message asking me to do an update to the BIOS: 'bios-20120601184846. I did but it was not reinstalled the wireless driver, and since my computer can't find any wi - fi network. I still have an ethernet connection.

  I tried several ways to fix it and nobody has succeeded:
  -J' installed the driver "slate-driver-s1081-win7-wlan-1005.31.1222.2011".
  -J' installed from the toshiba Web site, the driver "realtek_wlan_win7_2000016L_20110523".
  -I turned down my anti-virus and firewall
  -J' tried a system restore on the eve of the update of the bios, but it did not because of a virus while it was off.

  The wi - fi card is always displayed in the Panel of the unit, and it is said in the work.
  The wi - fi network works on another computer or smartphone, so the problem comes from this computer.

  How can - I'm restoring my wi - fi connection?
  Thanks for your help.

  Technical information:
  Model: Satellite C660D - 104 Ref: PSC1YE-00Q001FR serial number: 3B097607K
  Wi - fi card: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC #2

  (PS: Sorry if I don't speak very well, I'm not English.)

  Have you created a thread beginning here:?
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=67170
  If so follow the first thread to avoid some misunderstandings