Satellite C660D - after update BIOS wireless card no longer works

Similar Questions

• Satellite M40X: After update Bios keyboard keys do not work correctly

  I have a Satellite M40X and I had updated the Bios to v 1.60. and now the keys u, m, 7 and the up arrow will not work correctly. The problem is that there is not another version of Bios to use.

  How can I solve my problem?
  Can I get the old version of the bios?

  Thank you
  Gabriel

  Hello

  No won´t you be able to recover the old BIOS. The only two options are:

  1. try to update BIOS and check if it work s
  2. in the case of no success, please visit the [ASP Locator | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT] to search for the nearest ASP in your country and ask them for a checkup of material and repair.

  Welcome them

• Wireless card no longer works on Equium l20-197

  Hello

  Initially, I posted the problem I have on the US site, I didn't know that there was a site for europe.
  The long and short of it is my wireless card no longer works
  Here are the details on the hyperlink below and solutions of attempts, none works so far

  http://forums.Toshiba.com/T5/networking-Wi-Fi/wireless-problem/m-p/158046/highlight/false#M9476

  If someone can add something?

  Thanks in advance
  Kevin

  Hello

  According to the post in the US forum, the WLan card is not visible in the device under network adapters Manager. Right?
  You can see an unknown peripheral or Ethernet controller in Device Manager?

  If so, then check this Toshiba HowTo identify the unknown device:
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78]

  If you don t have any unknown devices and if the WLan card still isn't in the list, then I guess the WiFi chip is defective.

  In this case I recommend using a solution just as the use of external USB WLAN.

• Recent update caused the wireless card no longer works. After a restore of the internet system works.

  27 or 28 September 2010, a series of updates was installed automatically on my new Sony Vaio with Windows 7. I just bought the computer a week and half ago. After this series of updates has been installed, the wireless card would be the interface is no longer with the router. When I did a restore system before the update was installed, the internet worked. I left the computer load updates again - today, October 2, and again the wireless card would not work with the router. I removed the updates and the work of the internet. Please notify. I travel a lot and must be able to work online wireless.

  Hello

  1. what updates are?

  2. what exactly happens when you try to go online after installing updates?

  3. what operating system do you use?

  Please answer these questions, that could help us help you better.

  The next time that you install these updates, please check for red or yellow bangs inDevice Manager and send back the same.

  Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:
   
  a. click Start.
  (b) in the search box type eventvwr.msc , and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer 
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  The articles above can also be used on windows vista.

  Also take a look on the underside of the articles that might help you.
  Why can't I connect to the Internet?

  Using the troubleshooter from network in Windows 7

  Network convenience stores

  Use Network Troubleshooter event logs to solve network problems

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Satellite C660D - after updating the BIOS, WiFi no longer works

  Hello
  I have to post my message again, my old account was deleted because it bore the name of Toshiba inside.

  Here's my problem:

  I have a Tempro message asking me to do an update to the BIOS: 'bios-20120601184846. I did but it was not reinstalled the wireless driver, and since my computer can't find any wi - fi network. I still have an ethernet connection.

  I tried several ways to fix it and nobody has succeeded:
  -J' installed the driver "slate-driver-s1081-win7-wlan-1005.31.1222.2011".
  -J' installed from the toshiba Web site, the driver "realtek_wlan_win7_2000016L_20110523".
  -I turned down my anti-virus and firewall
  -J' tried a system restore on the eve of the update of the bios, but it did not because of a virus while it was off.

  The wi - fi card is always displayed in the Panel of the unit, and it is said in the work.
  The wi - fi network works on another computer or smartphone, so the problem comes from this computer.

  How can - I'm restoring my wi - fi connection?
  Thanks for your help.

  Technical information:
  Model: Satellite C660D - 104 Ref: PSC1YE-00Q001FR serial number: 3B097607K
  Wi - fi card: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC #2

  (PS: Sorry if I don't speak very well, I'm not English.)

  Have you created a thread beginning here:?
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=67170
  If so follow the first thread to avoid some misunderstandings

• Satellite A300 - after update BIOS black screen

  Hi all
  I just applied the update to the BIOS on my Satellite A300. After the update is successful, the system carries out a restart. Now when I try to start it I get no display, I can hear the proceedings to hear it, the CD player, the DVD, playback led flashes.

  The ASP Toshiba rang me (phone call), the motherboard must be replaced after a bios update, but it is very expensive for me :(
  Please can you tell me if they are a way to fix it without replacing the motherboard? The bios is an Insyde and according to the site Internet the bios bios [recovery technology | http://www.insydesw.com/press/2008/press_060308.htm]. I guess that the ASP does not know that.

  Please can you tell me how to start the recovery procedure it is possible (combination?),.
  Any help on fixing the laptop without replacing the motherboard will be much appreciated.

  Hello!

  I think that the ASP is just and in the worst cases, the motherboard should be replaced.

  You can try to remove the battery and the AC adapter. Wait one hour and then connect the AC adapter and the battery and try again.

  If it doesn't work you should go to an ASP. Perhaps a BIOS reset can solve the problem, but it can be done from an ASP.

  Good bye

• Qosmio F50 - 10Z - after update BIOS lit buttons do not work

  TEMPRO alerted me on an update of the BIOS - bios - 20090415092322.zip - for 32-bit Vista, published April 15, 2009 for my F50 - 10Z.

  Since then, the enlightened "buttons" at the top of my keyboard no longer work - including, annoyingly, the key to turn the light off.

  Is that what I can do at this point? I tried a system restore but it did not affect the BIOS.

  I agree with Akuma. Now, you can try to set the BIOS to default settings and also reinstall the package of added value.
  This package also contains command buttons utility.

  Perhaps after having reinstalled it everything will work properly again.

  Please send us a feedback!

• After update of credit card will not work my subscription to Photoshop

  I've updated my credit card information after the expiration of my card to reactivate my subscription to Photoshop CS6. He crossed the fine and gave me the message that my subscription had been reactivated. However, when I try to launch Photoshop Application Manager says that I need to renew my subscription. When I go online to "My subscriptions" my subscription to Photoshop is listed as being active.

  I called several representatives online chatting have passed several times during the time period. The last person I talked to said I have to wait 5-6 hours to make it active. I had to wait for 8.5 hours now and am struggling with what to do next I really need Photoshop to be back on so I can with my work.

  I read something on another thread to wait 72 hours. I sincerely hope that this is not the case.

  This should not be the case. You should be able to change credit card and continue to work. I am reaching out to you by email and we'll get the problem solved.

• my wireless card no longer works...

  randomly using my computer my card wireless NETWORK has stopped working. I checked, and for some reason any the pilot only are there no more. tried to reinstall that driver for my realtek wireless card, still did not work. site HP Web to find what drivers I might miss even tried, and it came with nothing. I cannot turn it on anyway, can't find it anywhere except my device manager and, even then, it gives me no details on this at all. I don't know what else to try, or why she would randomly doing this. I scanned for virus, nothing came. and I made sure the NETWORK card has been activated in all ways I might be able to turn it on.

  Electrical components sometimes must have all the food sources removed and reintroduced to work properly.  Try to perform a hard reset first, if this does not work then we will move on to the next step.

  To perform a hard reset

  • Shut down the computer by going to the menu start and select shut down. (If you have no display, hold the button for 5 seconds); (if the computer don't market, go to the next step)
  • Unplug the adapter from the laptop.
  • Remove the battery from the bottom of the laptop.  There will be a switch/battery eject button.
  • Wait at least 1 minute with all sources of power disconnected.
  • Reinsert the battery and reconnect the power adapter, and then try to turn on the laptop.

• Satellite P500 - after update BIOS on the numeric keypad does not work anymore

  I just had a Satellite P500 and am running Windows 7. I downloaded all the latest drivers and updated the system BIOS to version 1.70 (from Toshiba support website). Now, my numeric keypad of the keyboard does not work.

  The NumLock light is on and when I hit the key "6" on the pavement, he turns the power light, but the behavior of the other keys does not change that it is on or off. The '-' key to enter a '6', but none of the other keys (except "enter" does nothing.

  I removed the keyboard driver and rebooted to reinstall the keyboard driver, but has no effect. The keyboard has worked for a few days after that I flashed the bios but seems to have stopped since I started using a USB mouse. I tried to uninstall the USB mouse driver, but who have nothing do either (it was a Logitech driver).

  Anyone have any ideas? Thanks in advance

  > I did not upgrade bios 1.7
  Maybe you should try upgrading the BIOS
  As another user has suggested upgrading the BIOS 1.7 helped, even if the end user has updated the BIOS twice

• Satellite U400 - after update BIOS lighting lights

  Since the update the BIOS on my U400-15E (Vista 32), lighting of the multimedia keys, touchpad always turn after the restart, recovery from the sleep or Hibernate. Touch the illuminance on the off button once does that second touch them will turn off until the next reboot.

  Illumination is disabled in the configuration of the bios and also through HWsetup. After reboot/wake up, without touching the illumination button, accessing the illumination in HWSetup tab / illumination is shown as turned off even if it's on. Touch the power button can toggle illumination to without changing the real light on keyboard. Next key activates / deactivates them both off.

  This isn't a pain important but very frustrating. Any ideas?

  Hello

  A friend of mine had a similar problem with the buttons of the illumination and the reason was an update of Windows or software that is not compatible.
  Anyway, he did also reinstall the VAP and updated the BIOS but no luck. At the end of the story he reinstalled Windows using recovery disc HARD option and everything worked very well.

  Maybe a new facility with Toshiba Recovery disk or HARD drive recovery option can help you, buddy.

  Good luck!

• How to restart the Satellite A100 after update BIOS to version 6.00?

  I've updated my BIOS to version 6.00, but when restarting my Toshiba Satllite the BIOS shows me an error:
  "No TPM or TPM has problem.
  The ram test has passed but I can't get into Setup and BIOS freeze after the RAM test
  Do you understand what the problem is and how I can find the solution?

  My model is: PSAA8C-TA402C

  I speak and write better French-language.

  Thank you

  E-mail: [email protected]

  ASP you last chance I understand that s too far from your city, but there is nothing to do. Communicate with the guys and maybe you will have to send the laptop to the ASP.

  Good luck

• Satellite P750 - after update BIOS CPU fan runs faster

  Hi all

  On my Satellite P750 (PSAY3A - 02L 001)

  Since I've updated my BIOS to version 2.40, I noticed that the CPU fan runs much faster then normal.

  Even more, when I go in options inside BIOS configuration, saving it comes up with "an invalid entry.

  Has anyone experienced this problem? Know a way to solve this problem?

  In General, old BIOS is not available when one is offered on Toshiba new download page.
  If you have older version of BIOS try to contact the nearest Toshiba service provider and ask for help. They have access to the database of Toshiba and can get the ld for you version.

  By the way: have you tried to change the power settings for the cooling method and less upgraded?
  This should reduce the activity of fan cooling.

• Re: Satellite P100 - after update BIOS it does not start optical drive

  I have updated the BIOS to 4.70 in my P100 PSPAAE. After restarting, I expect about 10 minutes, but nothing has happened, after that the screen of the BIOS, the screen went black. I turned off the laptop only.

  I chose the option "start windows normally". Since (I assume) the laptop does not drive. Any, I have to start from there. Everything else works fine.

  It is because of the update of the BIOS, or something else could cause this problem? Any idea or help appreciated!

  Hello

  The optical drive is recognized from the BIOS?
  You can read the disc in Windows?

  Maybe you should load the default settings in the BIOS and try another bootable disk.

• Satellite 5205 - after updating Bios - repairman / message call Bios

  Toshiba 5205 - repairman / call Bios - need help.

  I flashed my bio and the laptop locked in windows and not extinguished after the flash.

  Now when I turn on the laptop, I have no picture and the front of the laptop has a LCD remote that says: technician / call the BIOS.

  I already disassembled the laptop battery and let sit a day full to the bios killthe, but I get the same error and still no picture.

  How can I fix? The bio should be dead by now. Am just using CA power supply for power. I tried to connect the battery in and I also put battery back in. bio and I get the samething on the remote lcd display error message.

  There must be a way to work around this problem, if anyone knows please let me know.

  Hi Jim,.

  Unfortunately the battery will not reset your BIOS. The BIOS is maintained by a battery on your motherboard (CMOS or RTC battery) and you will need to disassemble your laptop to access the battery. Even remove the battery CMOS does not restore your BIOS, since it will be held in a non-volatile CMOS chip area.

  You will need to take your laptop to an authorized Toshiba Service Agent to be reflashed with a new BIOS chip.

  Kind regards