Satellite C850-1CN - cannot burn a CD on Win8.1

Similar Questions

• SD card reader does not work on Satellite C850-1CN after installed Win 8.1

  Hello

  Since I installed Windows 8.1 on my computer Satellite C850 - 1CN Ref.: PSKCAE my SD port doesn't work
  I would like to know if there is a driver I need to download because I searched the site for a port driver but in vain...

  Sorry for my English, I speak French and I hope I'm in the right forum

  Hello

  You must download and install the controller card reader for Win 8.1 driver system

  This driver must be right:
  [Windows 6.1.8400.30136 v 8.1 - 64 Bit card reader controller | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7499 selSh ortMod = 3417 & language = 13 & selOS = all & selType = 316 & upload year = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = 316 & page = 1 & ID = 88526 & OS ID = 46 & driverLanguage = 42]

• Satellite Pro L875: Cannot burn DVD Recovery Media Creator and win 8

  I have a L875 Pro of the Satellite with Blu - ray burner.

  I tried to create the recovery DVD disc, the burn process stopped and error guest asked me to check if the disc is damaged or scratched. After the burning process, the DVD was not empty and some data wrote on this subject.

  I tried to burn the data disc in windows 8. the burner is not started. I'm only able to add files to the disc.

  I play Blu - ray movies and dvd movies, blu ray player was fine.

  I found information on the appropriate corresponding to the burning speed dvd disc speed.

  How do I know what speed the burner support?

  How to burn a DVD or Blu - Ray in windows 8? (I looked on the Microsoft forum, but the solution did not work.)

  It would be great if someone respond and make the drive burn discs.

  As a first step, it will be interesting to see why you cannot create recovery discs.
  Have you used vacuum on DVD-R media? Otherwise please use it and buy a product of high quality like Verbatim or TDK.

  Is there an option to create the USB stick recovery?

  Combustion under Win8? Have you tried to use some burning as NERO applications?

• Satellite C850-1CH - cannot find the wireless drivers to install!

  I recently bought a Toshiba Satellite C850-1CH. The sistem OS is Windows 7. I was able to install all the drivers, except a few strangers that are on network connections and I don't know where to find them! I even tried to search for them via the Windows updates, but not luck.

  Can anyone help me find these drivers: (?) Here is a picture of what I mean: http://oi50.tinypic.com/345zj29.jpg (and Yes, I installed all the drivers needed for the network/LAN/wireless, but I can't find the drivers for those!)

  Here is the list of drivers that need to be installed and of course it Johan be installed in the order given:
  Windows 7
  Chipset SW installation utility
  Intel Management Engine Interface
  Display driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  ATI HDMI Audio Driver
  HD SRS Premium Sound Technology
  Synaptics Touch Pad Driver
  Realtek LAN Driver
  Realtek driver LAN wireless
  Intel Wireless Display
  Filter driver package Realtek Bluetooth
  Bluetooth Stack for Windows by Toshiba
  Bluetooth monitor
  Intel USB3.0 driver
  Realtek card reader
  TOSHIBA Value Added Package
  Sleep TOSHIBA utility
  TOSHIBA resolution + plug-in for Windows Media Player
  TOSHIBA Media Controller
  TOSHIBA Media Controller plugin
  TOSHIBA Network Device ID registry tool
  TOSHIBA Web Camera Application
  PatchFiles PCIIDEREG - 1.2
  PatchFiles

  Check it please this list and install missing stuff.

  WLAN drivers, you can find the portal of Toshiba WLAN - http://aps2.toshiba-tro.de/wlan/

  If you have any other questions you are welcome.

• Satellite C850 - Windows cannot find my ATI HD 7610 M

  Hello

  I have a Satellite C850 PSKCCK 02D00M. Today, he has decided not to recognize the video card from HD7610M and was used to use the Standard VGA adapter. The installation of the last failed and drivers drunk ATI of factory. I can still use the computer as usual, except that the highest resolution is 1024 x 768.

  Earlier today, the content of the display acted I could see the cursor and the screen would react to the pressures on the keys, but the shown content was large blue blocks with details of large print tasks. I decided to start in safe mode and back, but it was not fixed. My laptop is unable to find the video adapter HD7610M since I deleted manually in the Device Manager in the hope that windows will pick it up and everything.

  Someone has an idea of what's going on? and most importantly, how to fix?

  Blessings,
  Spencer

  Hi Spencer

  In my opinion, you should install original recovery image and test it with the factory settings.
  Can you do this and post comments?
  What happens when you start your laptop computer and enter the BIOS settings? You can see everything as usual?

  Somehow, I feel that he can be a serious problem with graphics card.

• Satellite L30-113 - cannot burn CDs or DVDs

  I have a Satellite L30-113. Recently my driver failed for my dvd player, until I was able to install a few things and burn CDs and DVDs. Now, I can't record CDs or DVDs.

  Nero and CDBurnerXP for CD/DVD ROM say 'cannot continue burning process as you did not choose the device for recording. CD/DVD ROM propities shows that it does not support recording CDs and DVDs.

  I uninstalled the driver and restarted my computer and it reinstalled the same as that which does not once again. I am a driver update search and xp tells me that the driver is up-to-date. I checked the Toshiba updates with none of these updates for CD/DVD ROM.
  I have no idea on how to fix this unit "corrupted".

  Hi mate,

  I had a similar problem on my Toshiba laptop. So here, I searched a little bin forum and I founded to delete upper and lower filters in the registry. I followed the instructions in this Microsoft article:
  http://support.Microsoft.com/kb/314060

  After that, I again was able to burn DVDs.

  In addition, updated driver from CD/DVD isn't necessary because this driver is part of the operating system.

• Satellite C850-B991 cannot start - check Media [Fail]

  Hello

  I have a problem with my laptop C850-B991 Satellite, I can't start Windows and get the message "Check Media [Fail]" on a black screen, I can not also start for the installation of windows media, or install a new version of windows.

  How can I fix this please? I do not have the recovery media (DVD)

  For some reason your HARD drive is not accessible.
  You can enter the BIOS settings?

  If Yes, set it please to the default settings and try again.
  Check please if the HARD drive is recognized correctly in the BIOS settings.

• Satellite A210-16F cannot burn CDs or DVDs...

  Hi, I bought a Satellite A210-16f. I did the downgrade to XP Professional... Everything works fine, but I burn cds, dvdcs, audiocds can´t...
  I don't know if its problem of HW or SW problem... In Vista home I didn't try to burn a CD, because I reinstalled it XP.

  I use Nero 8, but after 3% of burn it show me error and Burning process failed
  Nero 7 shows me the same.

  I tried Toshiba disc creator and this SW shows me this:

  The ocured of following error to save data
  Stops the current process
  Error occurred during the registration phase...

  etc...

  Can U help me?

  Thanx

  Well, either it's a question madia or CD/DVD drive problem.
  Check another CD and DVD from different manufacturers.
  If the same thing happens to what different types of media, then it s a STRANGE HW issue.

• Re: Satellite L100 129 - cannot burn DVD more but can write to CD

  Hello

  I speak very well English, please try to understand me...
  I have a Toshiba Satellite L100 129. I burn long before DVDs, but since a week I can't do anymore! I can't burn CDs even but today morning I tried to burn a CD and it worked successfully. I also tried to burn a DVD, but it does not work. Whenever I tried it shows me this kind of message in alcohol:

  * Information system *.
  Windows XP Home Edition 5.1 Service Pack 2 (Build 2600)
  Processor Info: Genuine Intel(r) CPU T1300 @ 1.66 GHz (1662 MHz)
  Memory available to Windows: 1.038.384 KB

  * Information program *.
  File name: C:\Program Alcohol Soft 120\_Alcohol.exe
  Legal name: Alcohol Soft Development Team
  Description: Alcohol 120%
  Original: Alcohol.exe
  Product: Alcohol 120%
  Brand: Alcohol Soft Development Team
  Copyright: Copyright (c) 2002-2008 Alcohol Soft Development Team
  Version: 1.9.7 (Build 6221)
  Date: 2008/02/22
  Size: 1815496 bytes
  Hash: ee833b4b446b7fa2e05541d4090f3c33
  File name: C:\Program Alcohol Soft 120\alcoholx.dll
  Legal name: Alcohol Soft Co., Ltd.
  Description: Alcohol virtual device control library
  Original: alcoholx.dll
  Product: alcohol
  Copyright: Copyright (C) 2000-2008
  Version: 4.12.0 (version 0)
  Date: 2008/01/18
  Size: 1244640 bytes
  Hash: f1274ca402d9296cd31eacc34a88bbea
  File name: C:\Program Alcohol Soft 120\devsupp.dll
  Legal name: Alcohol Soft Development Team
  Description: Alcohol software device capability
  Origin: devsupp.dll
  Product: Alcohol software device capability
  Copyright: Copyright (c) 2002-2006 Alcohol Soft Development Team
  Version: 2.5.4 (Build 222)
  Date: 2008/02/22
  Size: 60288 bytes
  Hash: 4b22ef831539d9f5b6923d3d286141e7

  * User information *.
  License: UNREGISTERED
  Registered user ID: not REGISTERED

  * Options setting *.
  Devices of control interface: default driver control Interface
  CPU priority level: high
  Size of buffer (MB): 256
  Examine the accuracy of data read from physical devices: Yes
  Activate the Enhanced weak sector Scanner during dumping: No.
  Overburn disc (s): No.
  Disable "write better automatic speed selection" if possible: No.
  Fill memory buffer before recording discs: Yes
  Book now Type DVD + R / DVD + RW disc as DVD-ROM when burning: No.
  Ignore Media Type: No.
  Refrigerants (re-writable physical Signature) emulation: No.
  BAD sectors emulation: No.
  Data fixed & emulation of subchannel: No.
  Laserlock emulation: No.
  Current language: French

  * Device (s) list *.
  (D) HL-DT-ST DVDRAM GMA - 4082N (atapi, Port 1, Bus 0, Target 0, Lun 0)
  (G) QO2663I TAI648E (asukl9p6, Port Bus 2, 0, Target 0, Lun 0)

  ACPI.sys ACPIEC.sys C:\windows\system32\drivers\aegisp.sys afd.sys asukl9p6. SYS
  ATAPI.sys ATMFD. DLL audstub.sys BATTC. SYS c:\windows\system32\drivers\beep.sys
  BOOTVID.dll Cdfs.SYS cdrom.sys CHDAud.sys BoiHwSetup.sys
  CLASSPNP. SYS CmBatt.sys, compbatt.sys disk.sys DLABOIOM. SYS
  DLACDBHM. SYS DLADResN.SYS DLAIFS_M.SYS DLAOPIOM. SYS DLAPoolM.SYS
  DLARTL_N.SYS DLAUDF_M.SYS DLAUDFAM. SYS drmk.sys DRVMCDB. SYS
  DRVNDDM. SYS dump_atapi.sys dump_WMILIB. SYS Dxapi.sys dxg.sys
  dxgthk.sys enodpl.sys Fips.SYS fltMgr.sys Fs_Rec.SYS
  Ftdisk.sys hal.dll HDAudBus.sys hiber_WMILIB. SYS HSF_CNXT.sys
  HSF_DPV.sys HSFHWAZL.sys HTTP.sys i8042prt.sys igxpdv32. DLL
  igxpdx32. DLL igxpgd32.dll igxpmp32.sys igxprd32.dll imapi.sys
  Intelppm.sys ipnat.sys ipsec.sys isapnp.sys c:\windows\system32\iviaspi.sys
  Kbdclass.sys KDCOM. DLL kl1.sys klbg.sys klfltdev.sys
  klif.sys c:\windows\system32\drivers\kmixer.sys ks.sys KSecDD.sys klim5.sys
  mdmxsdk.sys mnmdd. SYS Modem.SYS mouclass.sys MountMgr.sys
  C:\windows\system32\drivers\mrxdav.sys mrxsmb.sys Msfs.SYS msgpc.sys mssmbios.sys
  MUP.sys NDIS.sys ndistapi.sys ndisuio.sys ndiswan.sys
  NDProxy.SYS netbios.sys netbt.sys Npfs.SYS netdevio.sys
  ntdll.dll Ntfs.sys, ntoskrnl.exe Null.SYS OPRGHDLR. SYS
  PartMgr.sys pci.sys system32\drivers\pciide.sys PCIIDEX. SYS pcmcia.sys
  PFC.sys portcls.sys psched.sys ptilink.sys PQNTDrv.SYS
  Qkbfiltr.sys qmofiltr.sys rasacd.sys rasl2tp.sys PxHelp20.sys
  RASPPPoE.sys raspptp.sys raspti.sys rdbss.sys system32\drivers\rdpcdd.sys
  Redbook.sys Rtlnicxp.sys s24trans.sys SCSIPORT. SYS spzx.sys
  SR.sys srv.sys swenum.sys SynTP.sys StarOpen.SYS
  Sysaudio.sys tandpl.sys tcpip.sys TDI. SYS termdd.sys
  Update.sys USBD. SYS usbehci.sys usbhub.sys USBPORT. SYS
  USBSTOR. SYS usbuhci.sys vga.sys VIDEOPRT. SYS VolSnap.sys
  w39n51.sys watchdog.sys wdmaud.sys win32k.sys wanarp.sys
  WMILIB. SYS

  * Detailed information from the device (s) *.

  (D) HL-DT-ST DVDRAM GMA-4082N(1:0) for detailed information.

  Identification of the seller: HL-DT-ST
  Product identification: DVDRAM GMA-4082N
  Production revision level: HV02
  Location: atapi, Port 1, Bus 0, Target 0, Lun 0
  Support recording method: DAO, RAW SAO, RAW SAO + SUB, RAW DAO (96), TAO, DAO DVD
  BURN-free technology: BURN-Proof
  Auto-select best write speed: not supported
  -* Note: this information below is provided by the unit, it would be inaccurate. *-
  -* This software does not use this information! *-
  Removable media: Yes
  Version: ATAPI (INF-8090i/INF-8020i/INF-8028i)
  Response data format: 02 h
  CD - R read/write: Yes/Yes
  CD - RW read/write: Yes/Yes
  Reading CD - R fixed Packet: Yes
  Write test: Yes
  Read DVD-ROM: Yes
  DVD-R read/write: Yes/Yes
  DVD-RAM read/write: Yes/Yes
  Audio playback: Yes
  Composite Audio and video data streams: No.
  Digital output (IEC958) on port 1 supported: No.
  Digital output (IEC958) on port 2 support: No.
  Mode 1 form 2: Yes
  Mode 2 form 2: Yes
  Multisession: Yes
  BUF: Yes
  CD-DA commands supported: Yes
  CD-DA Stream is accurate: Yes
  R - W supported: No.
  R W-interlaced and answer key: No.
  C2 pointers Support: Yes
  Taken ISRC supported: Yes
  Taken UPC supported: Yes
  Read Bar Code: No.
  Lock media into the drive: Yes
  Currently drive LOCK state: unlocked
  Prevent jumper: No.
  Eject command: Yes
  Separate volume levels: Yes
  Separate channel mute: Yes
  Changer supports the drives present: No.
  Software slot selection: No.
  Side able change: No.
  P to W of introductory part: Yes

  * Source Image/disc information *.
  Type: File ISO Standard image
  Path: C:\Documents and Settings\Rhissa Harouna\Mes documents\
  Name: PANDORA.iso
  Size: 1927,75 MB
  Session: 1
  Track: 1

  Session 01:
  Track 01: DVD, number of sectors: 987008 (1.88 GB), address: 000000

  * Newspaper * dumping/record of progress
  The timestamp of the log file: 2009-04-06 17:09:38
  17:09:38 info processor: Genuine Intel(r) CPU T1300 @ 1.66 GHz (1657 MHz)
  17:09:38 MEDIA by memory available to Windows: 1.038.384 KB
  17:09:38 not enough memory! Adjust the size of the memory buffer à * 256 MB.
  17:09:38 image file of reading from: C:\Documents and Settings\Rhissa Harouna\Mes documents\PANDORA.iso
  17:09:38 DVD Source Info: Session: 1, track: 1, number of sectors: 1.88 GB / 987008
  17:09:55 (:)) D HL-DT-ST DVDRAM GMA-4082N(1:0): MEDIA by method of writing / speed)
  17:09:55 helio - DAO - 8.0 X (11080 KB/s)
  (D) HL-DT-ST DVDRAM GMA-4082N(1:0) - media format: DVD-R
  17:10:16 (:)) D HL-DT-ST DVDRAM GMA-4082N(1:0) - [write ERROR] LBA: 0, length: 32)
  S:key 03/0 C / 00 - "Write Error".
  17:10:16 (:)) D HL-DT-ST DVDRAM GMA-4082N(1:0): is burning failed e!)
  17:10:16 error message [03/0c/00] - write error
  17:10:16 (:)) D HL-DT-ST DVDRAM GMA-4082N(1:0): is burning failed e!)
  17:10:16 conference of the e cancelled © image file!
  17:10:19 an error occurred during the procedure of burning!
  Please consult the register and report the errors to technical support.

  I don't know how to solve it please I need help... Thank you

  Hello!

  You can burn discs using another program Nero for example or this only happens with alcohol?

  In your case, I would try to remove the upper and lower filters in the Windows registry. Normally this does not solve the problems with the CD/DVD drive. Just follow the steps described in this workaround from Microsoft:
  http://support.Microsoft.com/kb/314060

  Good bye

• Satellite M70-173 - cannot burn CDs or DVDs

  Hello

  I have an old but expensive laptop (Satellite M70-173). The CD/DVD drive is a carpet * a UJ - 841 s and can currently only read DVDs and CDs
  I have Nero installed 8.3.7.1, but it does not allow me to burn any DVD or CD
  I have all the updates that are installed for Nero, have also removed the "upper and lower limits" in the registry.

  It is not a mark of DVD or CD that I have not yet tried, but they all are coasters.

  I have the following options:

  1. try to set the drive - either with the technical assistance of the forum or replace the disk, so I decided that it is a hardware error

  2 buy a new laptop - but also like some advise on how to "clone" of the current notebook that I have so many other programs installed that I bought over the years and do not want to lose.

  I made copies pdf of burning errors I can post if necessary.

  Any help is welcome

  Kind regards
  Juan

  Hello!

  > I made copies pdf errors burning I can post if necessary.
  Yes, I think it's a good idea. ;)
  Otherwise it of a bit difficult to help you.

  But what CDs and DVDs you tried to burn? I have good experiences with Verbatim and TDK. Check it!
  And you should burn on a lower speed for CD e. g. 16 x.

  Good bye

• Satellite Pro M30 - cannot burn CD/DVDs

  Hello!

  Since I got my machine, I was not able to burn CDs or DVDs either. I get a 'power calibration error' that normally I guess means the disc broke. But, because it is a whole new drive (less then a month) and it can read all CD and DVD I throw at it, I doubt that it's a hardware problem. After a few minutes of Googling, I came across a thread made by other people encounter the same problem with this same drive (Mat * a UJ - 820 s), but no good solution (at least none that worked for me).

  Here is a log from Nero (6.6.0.1 (also tried older versions)). I hope this is of some use, because this is getting very frustrating... Thank you.

  Windows XP 5.1
  IA32
  WinAspi: -.
  Ahead WinASPI: file 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver = 2.0.1.68, size = 160016 bytes, created 28/07/2004 16:51:12
  Nero version: 6.6.0.1
  Recorder: Version: 1.00 - HA 1 YOUR 0 - 6.6.0.1
  Adapter driver: HA 1
  Drive buffer: 2048kB
  Bus type: default (0)-> ATAPI, detected: ATAPI
  CD-ROM: Version: 1.00 - HA 1 YOUR 0 - 6.6.0.1
  Adapter driver: HA 1

  = Scsi-device-map =.
  DiskPeripheral: IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: on
  CdRomPeripheral: MAST * A DVD-RAM UJ-820 s atapi Port 1 ID 0 DMA: on
  CdRomPeripheral: Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

  = CDRom-Device-map =.
  CARPET * a DVD-RAM UJ-820 s D: CDRom0
  Generic DVD-ROM E: CDRom1
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 74448896 (0) byte
  ShowDrvBufStat: 0
  BUFE: 0
  Physical memory: 510 MB (523184 KB)
  Free physical memory: 228MB (233560kB)
  Memory in use: 55%
  QUERIES PFiles: 0x0
  Static write speed table: 0
  Use consultation: 1
  Global Bus type: default (0)
  Control supported media: disabled (0)

  4.11.2004
  CD-ROM (ISO)
  14:02:51 #1 text 0 file Isodoc.cpp, line 6165
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: FALSE
  Simulate: FALSE
  Write: TRUE
  Finalize the CD: FAKE
  Multisession: TRUE
  Multisession type: Start multisession
  Burning mode: TAO
  Mode : 1
  ISO level: 1 (Max. of 11 = 8 + 3 char)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  14:02:51 text 0 file Burncd.cpp, line 2832 #2
  CARPET * A DVD - RAM UJ-820 S
  Protection against the imbedding of buffer enabled

  14:02:51 #3 text 0 file Reader.cpp, line 127
  Player running

  14:02:51 #4 text 0 file Writer.cpp, line 122
  Writer MATT * A DVD-RAM UJ-820 s running

  14:02:51 #5 ISO9660GEN-11 file geniso.cpp, line 3286
  First address writeable = 0 (0x00000000)

  14:02:51 #6 text 0 file Burncd.cpp, line 3117
  Turn on Track-at-once, using CD-R/RW media

  14:02:51 #7 Text 0 File DlgWaitCD.cpp, line 256
  Last possible write address on media: 359845 (79:59.70)
  Last address to be written: 51106 (11:23.31)

  14:02:51 #8 Text 0 File DlgWaitCD.cpp, line 268
  Write in overburning mode: No. (enabled: CD)

  14:02:51 #9 Text 0 File DlgWaitCD.cpp, line 2309
  Recorder: MAST * a DVD-RAM UJ-820 s;
  CDR code: 00 97 26 66; Entry YSOS of: CMC Magnetics Corporation
  ATIP data:
  Special Info [hex] 1: D0 00 98, 1 a 2: 61 42 (LI 97:26.66), 3: 4F 3 b 47 (LO 79:59.71)
  Additional info [hex] 01:00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

  14:02:51 #10 Text 0 File DlgWaitCD.cpp, line 430
  > Protocol of DlgWaitCD activities:
  =========================================

  14:02:51 Text 0 File ThreadedTransferInterface.cpp, Line 844 #11
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 51107 (51107) original disc POS = #51107 / 11:21.32
  relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 51105 blocks [MAST * a DVD-RAM UJ-820 s]
  --------------------------------------------------------------

  14:02:51 #12 text 0 file ThreadedTransferInterface.cpp, line 1047
  Prepare recorder [MAST * a DVD-RAM UJ-820 s] for write in TAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Closed disc, session not obsessed
  Tracks 1 to 1:
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 104974336, ISRC ""
  Introduction DAO:
  ===========
  __Start_ | ___Track_ | _Idx_ | _RecDep_ | _CtrlAdr_
  -150 | Lead-in | 0 | 0x00 | 0x41
  -150 | 1. 0 | 0x00 | 0x41
  0 | 1. 1. 0x00 | 0x41
  51107 | Lead-out | 1. 0x00 | 0x41

  14:02:51 text 0 file ThreadedTransferInterface.cpp, line 1096 #13
  Removed 2 blocks from end of track 1. Length: 51107-> 51105.

  14:02:52 #14 phase 24 file dlgbrnst.cpp, line 1853
  Caching of files started

  14:02:52 #15 text 0 file Burncd.cpp, line 4003
  Cache writing successful.

  14:02:52 #16 phase 25 file dlgbrnst.cpp, line 1853
  Caching of files completed

  14:02:52 #17 phase 36 file dlgbrnst.cpp, line 1853
  Burn process started at 16 x (2 400 KB/s)

  14:02:52 #18 text 0 file ThreadedTransferInterface.cpp, line 2497
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  14:02:52 #19 text 0 file Mmc.cpp, line 20673
  Set BUFE: Protection against embedding of stamp-> ON

  14:03:11 #20 SCSI-1106 file Cdrdrv.cpp, line 1432
  SCSI Exec, HA 1, YOU 0, LUN 0, buffer 0x03D90000
  Status: 0x04 (0x01, SCSI_ERR)
  HA-status 0x00 (0x00, OK)
  TA - status 0 x 02 (0x01, SCSI_TASTATUS_CHKCOND)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  CDB data: 0x2A 0x00 0x00 0x00 0 x 01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
  Sense data: 0xF1 00 x 0 0 x 03 0xFF 0xFF 0xFF 0x6A 0x0A
  0x00 0x00 0 x 15 11 0 x 0 x 73 0x03

  14:03:11 #21 CDR-1106 file Writer.cpp, line 311
  Power calibration error

  14:03:11 #22 text 0 file ThreadedTransfer.cpp, line 229
  all writers idle, stopping conversion

  14:03:12 #23 text 0 file ThreadedTransfer.cpp, line 223
  conversion idle, stopping reader

  14:03:12 #24 CDR - 201 file WriterStatus.cpp, line 200
  Invalid write state
  CARPET * A DVD - RAM UJ-820S\H1 T0

  14:03:12 #25 TRANSFER file-18 WriterStatus.cpp, line 200
  Could not perform PlageFin

  14:03:12 #26 text 0 file Mmc.cpp, line 15477
  start closing a Session

  14:03:12 #27 SCSI-1106 file Cdrdrv.cpp, line 1178
  SCSI Exec, HA 1, YOU 0, LUN 0
  Status: 0x04 (0x01, SCSI_ERR)
  HA-status 0x00 (0x00, OK)
  TA - status 0 x 02 (0x01, SCSI_TASTATUS_CHKCOND)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  CDB data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
  Sense data: 0 x 70 0x00 0x03 0x00 0x00 0x00 0 x 00 0x0A
  0x00 0x00 0 x 15 11 0 x 0 x 73 0x03

  14:03:12 #28 CDR-1106 file WriterStatus.cpp, line 249
  Power calibration error

  14:03:12 #29 TRANSFER file-19 WriterStatus.cpp, line 249
  Could not perform fixation

  14:03:12 #30 text 0 file WriterStatus.cpp, line 258
  falling back to disc fixation

  14:03:12 #31 Text 0 File dlgbrnst.cpp, Line 1711
  Set remaining time: 0:00,000 (0ms)-> OK

  14:03:12 #32 phase 38 file dlgbrnst.cpp, line 1853
  Burn process failed at 16 x (2 400 KB/s)

  Existing drivers:
  File ' Drivers\PXHELP20. SYS: Ver = 2.02.62a, size = 20016 bytes, created 28/10/2003 11:02 (Prassi/Veritas driver for win 2 K)
  File 'Drivers\atapi.sys': Ver = 5.1.2600.2180 (xpsp_sp2_rtm.040803 - 2158), size = 95360 bytes, created 03/08/2004 21:59:44 (driver for rec)

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)

  Here's how I just fixed my misfortunes:

  In short: go to controller - device manager and select IDE ATA/ATAPI: try to change only "PIO" mode instead of "Ultra DMA Mode" on the IDE channel that uses your DVD player, namely the secondary IDE channel (since 1 is probably your drive). It should say "Location 1" on the tab where the reader is NOT zero.

  Ultra-DMA is obviously more recent and faster and better, but I think that it infiltrates the specified performance of the PIO-mode. It took me about 10 minutes to write about 3 gigs.

  (1) uninstall manually each device driver that seemed even remotely connected to the "Mat * one" or "DVD" or "CD" INCLUDING "Standard dual channel PCI IDE Controller" and "secondary IDE channel".

  (2) to ensure a hard reboot (power off)

  (3) Windows to automatically detect any material it appears after reboot begins

  (4) one of these elements has been the "secondary IDE channel"... or in any case... go to Panel of-> system-> hardware: secondary IDE channel.
  b change of "Ultra DMA mode" "PIO" mode only

  (5) go to control panel-> hardware-> device-> IDE ATA controllers Manager / ATAPI-> secondary IDE channel: Transfer Mode = "PIO only" to ensure that this relocation, you just live kept this adjustment, otherwise set it as such and again, DO NOT change your "location 0" define, show your secondary ide channel tab should say "location 1". "

  (5) - hard reboot again

  (6) the system should come in and automatically detect your CD-ROM / DVD-ROM / Optical Drive / DVD - RAM drive both at the next reboot.

  It should then work.

• Satellite A350-20s cannot burn any cd or dvd

  Hello

  I have a problem with my dvd player. I can't burn a cd or dvd.
  I tried with several blank cd brand and dvd with Nero and I still have the same problem.

  The software crashes without an error message.

  I need your help.

  Thank you.

  Hello

  Are you trying to copy disk protected from copyright?
  Maybe this is not possible due to some restrictions
  If not, you should check to see if an update of the firmware of the player is
  If it is available, then you should find it on the European driver Toshiba page.

  Last but not least if may be a hardware problem, but the ASP must be contacted as a last resort. I mean in the majority of cases, the CDs and DVDs used is responsible for these issues
  I had this problem too and able to solve using another brand I m now with TDK-R discs

• Satellite A40-231: cannot burn CDs or DVDs

  Hello

  I can play CDs without problem, but I can't write them and DVD. I tried with Windows XP default recorder (by Roxio as he said), Nero and Infra Recorder but still had the same problem. Combustion process begins and finishes without errors with all of this software, but when I check the contents of the CD later, I see that nothing is written there, the CD is just considered as empty, or sometimes seen with 0 MB of available space, 0 MB total space.

  I tried with the CD - r, CD - RW and the DVD but I got the same problem. I have 2 389 MB free in my disk space hard as he is seen by Nero for the ability of the temporary folder that it uses.

  My DVD-R /-RW is recognized by Windows XP without problem and also, I installed the latest firmware from the site Web of Toshiba.

  Here are my specifications:

  Toshiba Satellite A40-231
  Toshiba DVD - ROM SD-R6112 DVD-R /-RW DRIVE Firmware Version: 1333 (latest news on the site Web of Toshiba Driver)
  System dual boot: Windows XP SP2 and Linux Debian Sarge

  Hello

  In the manual of Toshiba, you compatible o is a list and supported the CDs and DVDs.
  You must use these mediums as they are tested and should work correctly.

  Another tip:
  Go to start > run > and start recording with a command regedit

  Delete values
  upperFilter and UpperFilter of this key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  I've done on my laptop and noticed some improvements

• Satellite C850-1F2 - cannot activate the touchpad

  Hello

  Recently, I installed Windows 7 on my C850-1F2. For the installation to finish, I had to disable all unnecessary devices in the BIOS, including the internal pointing device/keyboard. After that, the installation went well and I subsequently installed all drivers (downloaded from Toshiba) manually correspondents.

  All devices can be installed and work properly - with the exception of the touchpad.
  If I re-enable the touchpad in the BIOS, Windows will not start. It just stops at 'Starting Windows' screen - not the gel (continuous loop animation), it will not simply continue. Starting in safe mode, it will also stop after loading all the drivers. I've had the laptop that works all night to see if I was just being too impatient, but nothing helps.

  Also, the system does not detect the touchpad. Manager devices displays only the USB mouse, that I have connected or anything. When you access the parameters of 'Mouse', the system will first ask me if I want to uninstall the Synaptics drivers. I have thus tried to reinstall the Toshiba and the generic Synaptics driver but no touchpad.

  If I use FN + F5 to activate the touchpad (while it is already disabled in the BIOS), I simply disable the keyboard. The touchpad does not work. However, I have to disable it again, then put the laptop to sleep and it wakes again so that the keyboard works again.
  Furthermore, if I reboot after using the fn + f5, again, the touchpad is enabled in the BIOS and Windows does not start.

  I'm really confused at this point. What Miss me?

  > For the installation to finish, I had to disable all unnecessary devices in the BIOS, including the internal pointing device/keyboard.
  I installed Win7 several times but I never heard of something like this and I've always installed when moved the BIOS default settings so I put t understand this theory and does not understand why you did that.

  In any case, if nothing works well I highly recommend to upgrade the BIOS to the default settings and then install the clean version of Win7. I hope you are using Microsoft original installation disc and not some self made things.

  I put t think that there is a magic trick that can solve your problem.

• Re: Satellite C850 - cannot start windows 8.1

  Hello

  I have reset clean my Toshiba Satellite C850 with USB windows 8.1 but now if I start the laptop on it happens has this code 0 xC0000001.
  I can not start safe mode cannot use advocatus.

  Help, please

  Hello

  Have you installed original recovery image that you created on the USB key?

  Please try to install it again. Usually after installation of the own image of recovery your laptop should boot correctly.

  By the way: have you noticed this problem right after the installation, or later after some updates to install.

  Have you tried to solve it using Windows start-up settings?