Satellite C850-1GL - no Wi - Fi connection after installing Windows 8.1

Hello to you all!

I necessarily need your help! A few days ago, I've upgraded to 8.1 Windows 64 bit on my laptop Toshiba Satellite C850-1GL and are identified is no longer available wi - fi networks.

I installed all drivers as specified by Toshiba (drivers are updated the most recent versions available).
With windows 7 64-bit and 64-bit windows 8 wi - fi networks have been identified without any problem.
My wi - fi network card is Realtek 8188CE.

Please help me, I don't know what to do.

Forgive my broken English.

Thanks for your attention!

Hello

Wireless network adapter installed and listed correctly in the Device Manager?
Don't forget the wireless network adapter is enabled properly (not in airplane mode).

Tags: Toshiba

Similar Questions

  • Satellite P300-1This - Microphone does not work after installing Windows 7

    Hello world.

    At first, I'm sorry for my bad English, so I will say in no time.

    A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?

    I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.

    Hello

    Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
    Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.

    After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.

  • Satellite T130-11U, lost the Bluetooth connection after installing Mobile Broadb

    I recently bought a Satellite T130-11U and established a connection with my Nokia N82, using PC Suite.
    Then I installed my broadband Mobile (operator TMN) and lost the Bluetooth connection.

    There must be a way to overcome this 'conflict '.
    Anyone with the same problem?

    Thank you.

    Hello

    Perhaps this 3rd party application is not compatible and that is the reason why this happens
    But first, you should check if the Bluetooth is always enabled

    In addition, you should check if this issue happen after installation of the new BT stack

    Here you will find the new BT stack:
    http://APS2.toshiba-tro.de/Bluetooth/

    Welcome them

  • Satellite A500-1GL - Microphone does not work after install the OS re-

    re-installed OS updated all bios drivers etc. Can't get anything to record. Skype not getting no sound. Do not record other programs.
    Have uninstalled and reinstalled all the audio drivers, including the driver of the webcam.
    Have you checked the forums, but cannot find any solution.
    Can anyone help?

    Satellite A500-1GL.
    Windows 7 64 bit

    You have reinstalled original Win7 64 bit family Premium that you got with your machine?

  • Satellite A300-1EG: problem with the touchpad after installing Windows 7

    Hello!

    I had a problem with my touchpad since I installed Windows 7 (64-bit version) on my laptop (Toshiba) A300-1EG.

    I tried many different solutions to this problem.
    I checked the alignment of the touchpad (be it on) in the BIOS, I tried to install several drivers (on a site of Synaptics, automatically by Windows) and none of these work. Of course, I tried FN + F9 key combination.
    When I check the alignment of the touchpad in the Control Panel, everything seems fine. It is written, that "device working properly.

    I have Toshiba Software, what may be the cause of the problem?
    But I have no idea where I can find something.

    I'd appreciate any help.

    I hope to be understandable - English is not my mother tongue :) Thank you very much in advance for any ideas. :)

    Hi mate

    I'm not quite sure what problem you have but you should first try to install the necessary drivers touchpad m.
    Maybe you used the wrong driver in the past

    So Sat A300-1EG belongs to the series of PSAG4E.
    The European driver Toshiba page does not provide a special touchpad driver for Win 7 for this device.

    But I noticed that Win 7 64 bit drivers touchpad (Alps & Synaptics) for Satellite L500 PSLS3E series is released on the European driver page.
    Try both drivers Touch Pad for this device and test it!

    Welcome them

  • Satellite 3000-400-Accupoint does not work after installing Windows XP

    Hello

    I installed Windows XP (SP3) on my Satellite 3000-400, but the Accupoint II trackball does not work. It is not mentioned in the hardware Manager and I can't find a driver.

    Sorry for my bad English.

    Hello

    Do you mean that you can not use the touchpad buttons too?
    Hmm, sounds a little like hardware delivers what do you think?

    Have you tried to install a driver for touchpad?
    I didn't find the driver for the touchpad for Satellite 3000-400, but I found a satellite 3000-504 (the drivers are placed in the Archive)

    Try to install this driver and check if it helps.

  • No Internet connection after installing Windows 7

    I have the same problem as others with Windows Media Center AND IE 8, no internet connection. It works find with Firefox and Safari, but I can't get internet connectivity with IE 8, Windows Media Center, and Realplayer. It worked fine before 'redevelopment' of W7.

    See http://social.answers.microsoft.com/Forums/en-US/w7network/thread/e0e0d320-b6d1-4239-a6f6-afbe47072332 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • S3-951: terrible Wi - Fi connection after installing Windows 7

    Hello

    On Monday of this week I bought a new SSD that I used to replace the HARD drive of my Acer Aspire S3 (long out of warranty, unfortunately). Therefore, I had to install new Windows 7 and download all the drivers from the Acer site. However, while before I got the WiFi connection at full power, now I get only one bar, and if I move slightly in the whole House, the connection would be lost and even report no network in sight.

    Could someone help me find a solution to this problem? I don't have access to my recovery partition, otherwise I would have just used it to restore the settings by default when the wireless adapter worked flawlessly.

    Thank you in advance!

    There is a possibility of wire antennas came out the wifi card. You can access it by removing the 12 screws holding the bottom and gently lift the back. If it sticks, use a pick or a card plastic to clear out gently. Be aware of the static elect. damage. Look it up.

  • No connection after installing windows 7 from Windows xp.

    I have no internet connection and no volume!

    One of my friends said this is a new installation and I need to go on the manufacturer's website and download the driver? How in the world am I supposed to intall them if I don't have a connection? !!!

    And where is the Web site of the manufacturer of?
    I have a windows xp media center edition.
    PLEASE HELPPPP

    If AusteK don't list the drivers for WinXP, even, I would say you will be out of luck and need to consider changing your hardware

  • Unable to connect after installing Windows Update

    Just did, and she came back

    Stan

    Gloria Guest administrator

    Just did and she came back:

    Administrator

    Stan                                    Gloria                                      Guest

  • Program Compatibility Assistant popping up on each connection after installing windows 8

    install windows 8 on my laptop (HP Pavilion Notebook PC g6) but keep getting a popup saying I need to install the ATI Catalyst Control Center, I do a search and it says to contact ATI, but solutions at home? any suggestions?

    Hello

    Contacting ATI (AMD) would not help because you need a stamp certified HP to be able to run on your computer. My suggestion: check out the complete model (G6 is not a model) of your machine and go to the (x) HP to check. Many drivers have been downloaded in support of the sites for these days.

    I hope this helps.

  • Satellite Pro U200 - no sound after installing Windows 7

    Hello

    I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

    G.Magnason

    Hey Buddy,

    Have you already checked the site Web of Toshiba itself?
    http://EU.computers.Toshiba-Europe.com

    I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

  • Error message: Ethernet is not a valid ip address configuration and cannot connect to the Internet after installing Windows 8.

    Original title: Internet not working after installing Windows 8. Help, please

    I installed Windows 8 a week before, which had Windows Vista. When I was with Vista, I had no problem with the Internet, I had. But shortly after I installed Windows 8, the problem began. The connection is hardly 2 minutes. In addition, it is not navigate beyond my home page. After troubleshooting the result came as Ethernet is not a valid ip address configuration. It makes me really frustrated. After all, I was looking forward to navigate in windows 8, this problem makes me think really bad. If someone could help me, it will be grateful to you.

    Manorajan respected,

    I too had d same problem but I solved it later on myself.
    Here's how to: -.
    1-make sure you have intel network driver I installed your windows it pc. Download (on any other pc and transfer and install in it) and install it in your pc respective windows 8. Here is the link to download:-http://drivers.softpedia.com/get/NETWORK-CARD/INTEL/Intel-Network-Adapter-Driver-172-for-Windows-8.shtml
    Den DOWNLOAD realtek lan driver here to install http://drivers.softpedia.com/get/NETWORK-CARD/REALTEK/Intel-Realtek-LAN-Driver-80030730-for-Windows-8.shtml..if in the installation of theres no error ignore it... do not panic and reinstall... as it is already installed

    2 - unplug your LAN cable and Wi - Fi

    3 - go to network and sharing den center left side d click on change adapter settings clik left on the network card intel

    4-go to "Ethernet Adapter local area connection' properties and Deselect"Internet Protocol Version 6 (TCP/IPv6) "

    "5 - Select" ""Protocol Internet Version 4 (TCP/IPv4) '

    Press the properties button

    6 - Select "use the following IP address:" option and set this ips

    IP = "ip address".

    subnet mask = 255.255.255.0

    default gateway = your ip from the router (you can recheck all say on any other pc having a successful conection even wid tell by checking the properties of dial-up connection or any smart phone like any iphone or android mobile, if it is used as a wifi too in led staus/properties to your respective wifi name)

    7. in the second section select "use the following DNS server address:"

    Set "Server DNS PreferAlternate:" your router ip that entered u in "default gateway of" this. " pinterested ok and try to connect in wireless lan

  • Satellite A100-011 - Bluetooth not working after installing Windows 7

    Hi, I have a Satellite A100 - 011 (PSAARE) and I tried to install windows 7 on it.

    I used the installer of the software of toshiba for windows 7, and in Device Manager, all of the devices seem to be properly installed. (There is a disabled person, or an unknown device). However, I can't have my bluetooth appears or use it. I tried to install the 3.00 Vista bluetooth stack, but it didn't work. Why isn't my bluetooth device and function appear anywhere in windows 7? Someone at - it had a similar problem?

    Let me add that the WiFi is working normally.

    Hey,.

    I m no owner of the Satellite A100 but I think you need more recent Bluetooth software and drivers for Windows 7 to Vista place

    Check Toshiba Bluetooth portal for the latest versions:
    http://APS2.toshiba-tro.de/Bluetooth/

  • How can I do I check Windows Update after installing Windows 7 if my internet interface does not work?

    My only internet connection is done by an AT & T USB Connect 881U (mfg Serra wireless). Windows 7 update Advisor indicates that

    I need to check Windows Update after installing Windows 7 to make sure that I have the latest driver for this device, otherwise it can not work.
    If this does not work I have no way of checking Windows Update. Any suggestions of how I could get out of this situation if it happens.

    When all else fails RTFM:

    Install the Windows updates:
    http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

    Update your computer:
    http://Windows.Microsoft.com/en-us/Windows7/updating-your-computer

    Understand the Windows automatic update:
    http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

    Updates: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

    Change how Windows installs or notifies you of updates:
    http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Maybe you are looking for