Satellite C850 stops after 30 min after upgrading CPU

Similar Questions

• Satellite A100 stops after upgrade memory

  Consider me the thickie Pack 1... Not sure wot im talkin end but n e way...
  Have a Satellite A100 570 (PSAA2E)...

  Tried several websites online lookin for memory upgrade. Did not have the witt to use the toshiba site... Eventually get to the point...
  Ran the Diagnostics on laptop and sent module one needed.or so I thought... wrong 1 or 1 s I bought 2 x 1 G modules in order to 'double '...

  Got my money because they were not compatible with my system... something to do with the problems of density...
  Tried company called OFFTEK... they seemed to know what they were talkin' about... I'm Offtek. at present one...

  200-pin 1.8V SoDimm PC2 - 4200 DDR2... but Toshiba recommended below...

  1 GB memory DDR2 PC2-4300 (533 MHz)
  Part number: PA3411U-2M1G
  1024 MB (1 GB) memory PC2 - 4300 DDR2 (533 MHz)

  Theres an obvious difference... 4200 and 4300. But I'm not sure if there is a significant difference... or what it means
  Update the bios to the version latest and basically put all that toshiba had to offer for this model...

  EVEREST ran and it recognizes the module 1 G but when I pull out the original 512 MB module, the laptop starts for about 3 seconds then stops...
  This repeats about 5 times then fill stop...

  I don't like open the back cover too often but it's the 3rd module...
  Don't know what is supposed to happen if the module works... IE launch message... dunno if windows recognizes module 1 G...
  Would be - this bet safer to send Offtek module and stick with option of toshiba...

  Thanks in advance...

  Hey Buddy

  Have a look here:
  Memory for Toshiba Satellite A100-570
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=23658&ft=m&St=3

  You can use the DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM bars!

  The pc2-4300 Rams are the same as PC2-4200. It s just a marketing gag PC2-4300 are PC2-4200 modules that can be overclocked by some versions of BIOS PC desktop

  However, you must take the PC2-4200.

• Satellite C850 - 13 c turns off after upgrade CPU

  Hello

  I have a Satellite C850 - 13 c with the b820 cpu celeron. I bought a core i5 2450 m to upgrade, but after I installed the new processor, the laptop turns off each time after 30 minutes exactly.

  The problem happens also in bios mode. In the first 30 minutes, the laptop works perfectly but it just closed down without warning.

  Aparently others had the same problem with this laptop model, even with a core i3 cpu upgrade.

  I've tried so far things:

  -Ventilation control system - everything ok, temp is not above 40 ° c
  -Updated bios updated to the latest version
  -People with mobility reduced all the main functions of the cpu in the bios
  -The battery bios reset
  -Tried with AC adapter only, only battery, same result.

  This model just don't treat a larger cpu?
  Please help :(

  So generally the CPU upgrade is not possible with this show you are yourself and any exchange of material is at your own risk only.

  Problem is that Toshiba doesn't any info says on the upgrade of CPU and functionality with different processors. Thanks to a specific design, there is danger of overheating.
  In your case, it is interesting that laptop off after exactly after 30 min.

  Unfortunately I can't help you with this, but this case is very interesting announcement I will continue to follow the discussion. Let's see what other people will write about it.

• Re: Satellite A105 stops after 60 seconds (NOT a heat problem)

  Satellite A105-s4344 stops after EXACTLY 60 seconds. The mobo was removed from bevels and all devices removed unnecessary (DVD, HDD, WiFI etc.). Swapped CPU and RAM with those well known. AC adapter / CC exchanged and battery by the well known. Does the same on the AC or DC inputs only.

  I have not yet flashed the BIOS (at 60 seconds, that would be silly). But, I'm looking to replace or flashing with an EEPROM burner. Currently has V 2.0

  I don't know what heat genration detection using this system, but it is a possible cause if it is one of the later generations (visit http://www.topbits.com/how-to-monitor-cpu-temperature.html if you don't know that I'm referring to).

  Before reballing North and South of the bridge and flashing, I thought that I would get feedback from you folks. Just to cover all bases ;)

  P.S. the first person to ask what OS I use will get an instant ticket to the bottom of my list of respect.

  > P.S. the first person to ask what OS I use will get an instant ticket to the bottom of my list of respect.
  :) :) :) Best thing I've seen in this forum.

  Back to your problem.
  I'm not a technician but this is just my opinion on all of this. The fact is that after your laptop on CPU switch in seconds only reaches very high temperatures. You can turn on your laptop and just enter the BIOS settings and the same should happen again.

  I can't say for sure if it's 100% thermal or not question but what else can be responsible for decommissioning? CPU will be warm in just a few seconds. Significant change structure with temperature change and I can only imagine a contact will be interrupted.

  On this forum, we have had many reports similar as when portable cold starts and works well, but after that little time is off without reason. Maybe I'm wrong, but to me it sounds like heat or deliver bad contacts. Let's see what other people have to say about it.

• SD card reader does not work on Satellite C850-1CN after installed Win 8.1

  Hello

  Since I installed Windows 8.1 on my computer Satellite C850 - 1CN Ref.: PSKCAE my SD port doesn't work
  I would like to know if there is a driver I need to download because I searched the site for a port driver but in vain...

  Sorry for my English, I speak French and I hope I'm in the right forum

  Hello

  You must download and install the controller card reader for Win 8.1 driver system

  This driver must be right:
  [Windows 6.1.8400.30136 v 8.1 - 64 Bit card reader controller | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7499 selSh ortMod = 3417 & language = 13 & selOS = all & selType = 316 & upload year = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = 316 & page = 1 & ID = 88526 & OS ID = 46 & driverLanguage = 42]

• Satellite Pro L40 - after upgrade to Windows 7, the FN keys do not work

  Hello world

  I have a Satellite Pro L40 PSL4BE and have just upgraded to Windows 7. Since the upgrade I can no longer use the function key and the top and down arrows to control the volume. Keys F6 F7 & still control the brightness so I don't know the function key still works.

  Anyone know if it is a driver problem or nobody knows how to solve this problem?

  Thank you

  Drew.

  Hello

  You need to install the package of value added for Satellite Pro L40. This package contains all the necessary drivers for the FN keys. Then please install or update VAP if you have already installed an earlier version.
  Here you can download: http://eu.computers.toshiba-europe.com > support & downloads > download drivers

  Can you confirm that FN keys work with installed VAP?

• Activation questions Win 8.1 on Satellite Pro C850-1EQ after upgrade

  Hello everyone!

  I face a problem after the upgrade of my TOSHIBA SATELLITE PRO C850-1EQ preinstalled version of windows 8 to 8.1.

  After installation windows ask the product key to activate windows 8.1, but I don't have this activation key.

  I called Microsoft (Greece), but could not help me and told me to call Toshiba (Greece).
  The man of Toshiba technical support told me to remind Microsoft!

  In addition, he told me to check here (https://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/) before starting the process. Step # 7 says "don't forget your Windows password. You may need to enter after update. »

  Now, I'm back to Win 8.

  Is there a way to learn my activation key before installation of w8.1?
  I tried to find that the use of various tools, but nobody found the key.
  In addition, after 8.1 install, a message says:

  + Error code: 0xC004C003 +.
  + The activation server determined the specified product key has been blocked.

  I trust Toshiba and I want to use the latest version of w8.1.
  I'd be grateful if someone Toshiba technician could help me with this problem.

  John (from Greece)

  Hello

  > I'd be grateful if someone technician Toshiba could help me with this problem.
  It's community of users

  > Is it possible to learn my activation key before installation of w8.1?

  No, the preinstalled Windows 8 Toshiba is already activated and during the upgrade to 8.1 Win will not ask you to enter the serial key...

  Windows 8 is activated?

  Try this: create DVDs of Toshiba Recovery (or flash USB memory stick). Use the recovery media to recover the computer laptop back to factory settings. Update of the Windows 8 at the last State and then do the upgrade to 8.1 Win

• Satellite L300D BSOD after upgrade to Windows 7

  I got this laptop (Satellite L300D) for a little more than a year with windows vista (32-bit) running and there were no problems. However, I've recently upgraded to Windows 7 (x 64) and became the problems since the first reboot.

  On the first reboot after installing windows 7, the computer off just after the "Starting Windows" screen Turn on again took me to the repair of the system where he performed a system restore and I was able to start successfully even once. I thought that the problem had something to do with the automatic updates, so I disabled the and tried to restart to see if the problem has been corrected. This time, after the "Starting Windows" screen I got a BSOD of unrecoverable system error. After several attempts to reboot and multiple attempts to repair system (which usually says she didn't) it started correctly again.

  This problem has been going for about 3 weeks now and it is quite irritating. The results of the system of compensation for claims that a "Boot critical file is corrupt", but it starts eventually after several attempts to start. He also has a habit of turning at random during the race (it happens about once or twice a day). So from now on, whenever I chaque fois que je tente tries to start my computer it shuts down after the start screen or give the BSOD and restarts and the only way to make it work seems to be to keep trying to start and hope for a successful boot of the system upward (this happens finally after a few failed attempts).

  I did some research on this and came to [this | 1251 http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L300D-ST3501&rpn=PSLC8U&category=&selCategory=3&moid=222 & os = & ct = DL & selFamily = 1073768663] page. I think that's exactly what my problem is (need to update the BIOS), but if I understand correctly installing windows to do this only for 2000/xp/vista and I am unable to use the second option to boot from the disc as I get the BSOD before he gets to that point. I should try the windows install option although I am running windows 7 or is there another way to update the BIOS? Or I'm off completely and the problem is with something else?

  I wasn't sure what information I would like to add to this post so if need more information please let me know.

  Thanks in advance

  Edit: Oops, just realized the page I linked is not link to exactly what I had opened. I do not speak of 'critical BIOS updates for Windows 7 64-bit' under 'support form '.

  Post edited by: Jacob27

  Hello

  First of all, it would be interesting to know what code BSOD, you get exactly. Can you post this information useful? Normally, on the Microsoft Knowledge Base, you can find additional information about most of the BSOD codes and so you can start to solve this problem.

  BSODS are often associated with drivers or RAM/HDD. The latter, you can check with special diagnostic tools, Memtest86 for RAM and Drive Fitness Test for the HARD drive. These two tools are free and you can find it using Google. You can download an iso image of them to create a bootable media where you can start the test.

  Regarding your update to the BIOS: I put t know what L300D you have exactly, but according to the Toshiba site it shows an update of the BIOS also for Windows 7 64-bit. You can try to install it.

• S50 satellite - B - problem after upgrade Win10 touchpad

  I have a brand new S50-B-15F that I unboxed for the first time today. I have updated to OS to win 10, but the trackpad stops working after the initial upward boot (even if a USB mouse works fine). I've seen similar comments on this forum for another model of S50 (and referring I think to the pilot of the momentum) but not sure if this applies to my model. Could someone advise on the steps to solve this problem, keep it as simple as possible!

  good news... Thanks for the short comments...

• Satellite A200 stops after the post

  Hello.

  I replaced the motherboard that was dead with a used one on ebay, the user declares that it functioned very well.

  Anyway after that I set up everything, it starts for a few seconds and then stops.
  Then I tried connecting the Council, except in the case of the laptop and it's the shutsdown, after awhile, except in certain positions, or if I press somewhere, then he has not stopped.

  I have reviewed everything carefully and I don't see any evidence of anything whatsoever that could short the motherboard...
  I took a few pictures for you to see how I managed to do work for a long time:

  http://I54.Tinypic.com/ojnix5.jpg
  http://i51.Tinypic.com/2upekw8.jpg

  He got up on the upper right. If I normally put it will not work.
  The strangest thing is that if I go into the BIOS by pressing F2, he used stop! forever there remains, after the POST, that is the case...

  But if meet the thing and tighten all bolts, even its worse, shutsdown in 1 or 2 seconds and doesn't show any video...

  What do you think is?

  Hello

  I think that it of almost impossible to say what could be bad exactly.
  If the MESSAGE cannot be passed correctly, it means that something is broken on the motherboard.
  Have you checked RAM?

  Faulty or incompatible RAM can cause this problem but it s just a suggestion

  PS: what about CPU? Is it compatible with the new card mother and chipset?

• Satellite C850 restarts after shutdown - distributive fc17

  After that the team to stop the computer restarts. fc17 distribution

  Can you please send more than one sentence?
  What operating system do you use?
  Are you using the original OS that you got with your laptop?

  Have you installed any updates or anything that may be responsible for this?

• Satellite A665 - stop after standby

  Hey there,
  I have a problem: every time if I put my Toshiba Satellite A665 standby and wake him up, everything is normal for 3 seconds. Then the fan starts to work very hard for half a second, then the laptop down computer goeas as if it gets to hot. but it's not hot at all at this time. and after restarting, it shows the screen as there is no energy with the 3 Options how to start the laptop.

  I searched in google a lot, but he had nothing. Maybe it's because my new stick of ram. I bought a new one, to refine my laptop. now I have 6 GB instead of 4. Its the right one. so it gets reinforced on the Task Manager. It's corsair.com.
  Please help me. It is not a very big problem but its boring.
  Thanks Ghost_Ice

  If you are using 100% compatible RAM module I put t thinks he can be the reason for this behavior.
  Satellite A665 is not the latest model of laptop, it will be interesting to know since when you noticed this problem. Are you using the original pre-installed OS that you got with your laptop?

• Re: Satellite A300 - battery after upgrading to Windows 7

  Hi all

  I have with me the notebook toshiba Satellite A300.
  Bought the UNITED Arab Emirates. I just upgraded my pc to windows 7 and it seems to have affected my battery life, I guess.

  Anyone has idea about hw long battery last, I mean hours.

  Now, I can only use it for nearley 30 min... Some blog said of updateing the bios.

  Is this the reason realley or is the problem of windows 7 with my battery, experts advise please.

  Thank you, vb sbar

  Hello

  I don't know if the update of the BIOS would help, but if the new BIOS is available for you notebook series, then it s a m updated value.

  But you should also check the Win 7 power management settings.
  Please check this Toshiba HowTo:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

  It s on vista but Vista power management is very similar to Windows 7.

  Here you must change the battery more user-friendly options.
  Check it!

• Satellite C660 - battery after upgrading to Win8 problems

  Hello world

  I upgraded my computer laptop windows 8 but now I have to keep the charger plugged in any time to use the laptop. The battery can be charged and will stop completely in half an hour. I think it's due to a lot of background with windows process 8 can someone there help me walk the battery disappear so quickly. I can't downgrade to windows 7 that I deleted the roll back data.

  Thanks in advance

  Kind regards

  Mark

  I put t believe that the battery discharges more quickly because of some processes that run in the background. This question might be possible on tablets or smartphones, but this isn't a case for the use of the laptop.
  You can try to change the power management settings Windows 8 in order to save the battery.

  But in my opinion, your battery is almost the end of life.
  I'm don't know how old is the battery, but in my case, the battery is a little older and he holds just load for 5 min.
  So, I think that replacing the battery would resolve the issue

• Satellite A10 stops after 40 minutes

  A-10 Pro keeps closing after 40 minutes, power source is always the head of HQ, can anyone help?

  Has been verified the following: -.
  Virus
  Management - never switch on stop
  Cooling fan seems to agree

  In my view, this question has nothing to do with the virus, but maybe with overheating.
  How old is your laptop?
  Have you ever cleaned cooling grids or cooling fans? Fan may be OK, but how it looks behind the grille. Perhaps there dust and traffic blocks the air properly.