Satellite C850D - DVD burning problem

Similar Questions

• Satellite P300 19 p - CD/DVD burning problem

  Hi, I'm new to the forum and I hope somone will be able to help.

  I have DVD burning problems. When I use software engraving the image is usually copied ok and then the burning process starts, which usually lasts only a few moments, then the machine spits out the disc burnt and wasted.

  I usually use Corel DVD Copy 6, but have you tried TOSHIBA and other programs such as NERO. With the help of Corel VideoStudio, it burns discs with a success rate of 90%, but the problem comes when you try to copy my own created disks.

  I tried different types of discs (that is to say + R and - R), and I also tried burning speeds.

  Anbody else suffers from this problem?

  I have managed to find an error code 06077-26 - 2A 040902, made this average anyhting for anyone?

  TEMPRO alerts appear to have provided updates firmware for a number of other DVD players, but not for my machine? Maybe it's due a? All the drivers are up to date.

  Thanks for listening and the anybodies help is more than welcome.

  See you soon.

  In my opinion, you should not think about buying replacements. If you think that the drive does not properly contact service. If necessary the reader will be replaced free of charge.

• DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. Now, I've added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers, and a stop at 01:29:32:17 (th

  DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. I have now added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers and a cleat to 01:29:32:17 (the end of the film). The combustion is interrupted with a message to watch a C:\Users\ianle_000\Documents\20151206160446.iso file. There is no file. The message also provides a link for an explanation. This Web page is impossible to obtain. I'm running on a PC with Windows 8.1.

  Thank you once again. I burned the DVD!

  It is the first film for which I have reached the stage of burning. I'm not sure why she didn't in the first place. I tried to burn the "no menu" version, but at the time, was shot the DVD itself - I wonder when he reached this point?

  So, I burned the "no menu" version to another DVD, that worked, then the version of menu, with no cleat to a third DVD, which reads perfectly.

  Now that I have a successful routine, I'll stick to it.

  Thanks for all your help.

  I'll close this discussion now.

• Satellite M50 CD/DVD burning problems

  I recently puirchased a Satellite M50 with the CD/DVD Multi-lecteur. Toshiba literature indicates that it can write both write - once and several CD and DVD - writing.

  While I can burn on CD - RW and DVD - RW (DVD + RW) I can't burn discs CD - R or DVD-R (or DVD + R). The error message is something in the sense of ' does not support the driver (or reader) write once discs.

  Does anyone have any suggestions?

  Thank you

  Hello

  Well, it's not easy to say why you can t burn on some media. Maybe it s a malfunction of the media?
  Have you tried to burn CDs or DVDs from different manufacturers?
  I use TDK media and I m very happy. I found an interesting article on the CD/DVD burning.
  Check this: http://www.pcworld.idg.com.au/index.php/id;1400178792;fp;4;fpid;192

  Good bye

• How to reset the BIOS to resolve a problem with Satellite P100 DVD burner

  Hello

  I'm trying to reset my cmos to solve a problem with my dvd writer.
  I tried to run an old game I own and which was protected by starforce and ran starforce nightmare with a made the device completely unusable.

  After much research, I heard to reset the cmos.
  I have treid through debugging and nothing happened. I really don't want to open the laptop and remove the cmos battery or leave it for a month until the battery runs.

  Y at - it advice on what I should do.

  Could you please put more details on the model of your laptop and you CD/DVD driver problem? This will be useful for other suggestions.

  To be honest I don t think any reset BIOS, the RCT battery remove, etc. is possible or could help you.
  Only the ASP would be able to remove the TCR battery (if necessary what I don t think), but would not reset the BIOS like on the desktop PC!

  I appreciate feedback

• Satellite U205 - DVD Player problems

  I bought a Satellite U205-S5057 year last with Vista on it. For the first month, all video files burn very well. After that, I downloaded all kinds of codecs and trial versions of DVD burning software just got keep burning DVDs.

  After all downloads, of course, they began to come into conflict. I ran a system recovery and hoped that it would be clean all conflicts. I put some videos on a CD - rw and transferred to my book burning. When I clicked on the D: / he said "D: / no request." Then I re-installed Realplayer on the internet and now it burns in Realplayer 1 out of every 10 tent or if.

  Anyone know why I have so many problems with my CD/DVD drive? In addition, he always says D: / is a DVD player, even when I put a CD. Is this good?

  Hello

  Have you tried to remove the top and bottom of the registry entry filters?
  Not? OK, try this:

  First remove the CD/DVD drive device manager.
  Then, completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally, restart the computer, and restart the system.
  The Windows operating system should recognize the drive and it needs to be reinstalled again.

• Can activate a Satellite L40 DVD burner

  I recently bought a Satellite L40 (Vista Home) which came with a Pioneer DVD burner. The problem I have is that the player is currently disabled and that any attempt to activate the device fails.

  Can someone advise a solution because I can't use the drive as it is?
  Thanks in advance.

  What exactly do you mean by saying that the player is currently disabled?

  Have you checked the Device Manager and the status of the CD/DVD driver?
  Do you see yellow exclamation points?

  However, no matter if a yellow exclamation point appears or not, you should try to remove the CD/DVD drive device manager and must restart the laptop.
  Finally, the Windows operating system should recognize a new device and should reinstall the CD/DVD drive.

  Hope this short procedure will help you get the job of CD/DVD drive.

  I appreciate feedback ;) cheers

• Satellite P100 - DVD burner and reader of SD card not recognized by Vista

  Hello everyone,

  I have improved my P100 of Xp to Vista and I can't make my DVD burner and my reder of SD (embeded to the laptop of course!) work.

  I can read CDs or DVDs, but I can't burn a DVD.
  My SD card reader in my device list but not appear in my browser!

  Even more, a 'mass storage' appears as not porperly installed but I have no reference on which device refer to the. Not to mention, I tried several times to install the utilities on the site Web of Toshiba sd but it didn't change anything...

  What laptop Satellite P100-xxx you have exactly?
  The number of extensions and model number would be very useful for further study

  Anyway. to get the card SD works in most cases you need to install the Flash Media driver
  In addition, it would be very interesting to know what SD card do you use.

  With regard to the Vista DVD burning issue;
  How have you tried to burn the DVD? Did you use special software to burn like Nero for example?
  Have you used different DVDs from different manufacturers of DVD?

  From my experience, it would be possible that the player manages all DVD. You try different DVD from different manufacturers. I had a good experience with TDKs

• Satellite A60 DVD Player problems

  Hello
  I have a Satellite A60 (18mths old now) - when I 1st got it the DVD burner was DOA - so I sent off the coast and he had replaced.
  It has worked well since then until recently when the DVD player just wouldn't recognize anything - CD or DVD

  Tried everything with this unit - but at the end of the day understood the drive was gone.

  Another bought a (SD-R6252) and lo-and-this is the same thing happens.

  Each diagnosis that I run says the drive is OK - but there is no disk in it.
  I reinstalled windows from the recovery factory - discs
  Update the BIOS
  Tried to update the firmware of the drive-, but the update said that this was not necessary.

  Tried with Nero, Windows, InterVideo - nothing.

  As it is now a working machine that I can't afford 3 months back in time to send it off and watched it (that's how long it took the last time) and my nearest dealer of Toshiba is in place at the other end of the country.

  Suggestions for things that I can try out would be greatly appreciated.

  Hello

  The new drive can read CDs but can not burn anything. Am I wrong?
  Or the drive cannot recognize the media that in the Windows operating system?
  You said that you have reinstalled the widows. In this case, you used the drive.

  Try to remove the drive from Device Manager. Restart the unit. Now check if you can use CDs and DVDs

• CD/DVD burner problems said that it is damaged or missing? Anyone has any ideas to help me solve this problem?

  Hello, I'm trying to fix my burner but I tried to uninstall and reboot my computer to see if the problem might be to set but he told me that my driver cd is missing or damaged, and I don't know what to do besides put my computer back to factory settings. So if anyone knows something I can do like that I don't have to put it back to factory settings it would be great.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: My CD/DVD burner does not work and it is said that it is damaged or missing. How can I fix it?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD Burner problem

  I'm writing a DVD mastered with data. He is preparing to go, and then tells me "There was an error burning disc."  I then put in another disc and it never passes the validation errors entry screen. I bought another brand of DVD media and also a new DVD burner. I put the slow write speed as I can.

  Hello FarmBoy59,

  I suggest that you run the fixit by following the link below. This will automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media:

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  If this does not work, I suggest that you follow the steps in the link below:

  http://support.Microsoft.com/kb/314060

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• DVD burning problems

  I have a compaq presario cumputer with vista OS and it has oem cd burner - dvd - rom and the dvd software burning in it. Lately in trying to put a movie on a dvd disc it gets all the way to 99% and stops. Any type of information is even thrown the disk, what is and how do I do thanks.

  Hello bobo johnson,.

  You might want to look over the following information on DVD burning in Windows Vista.
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  There is also a KB article, that you can use to automatically fix problems burning DVDs in Vista. Click on the number to view the article.
  KB Article ID: 929461 -CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  If please reply back and let us know if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite 1730CDT, DVD burner replacement

  Hello
  is it possible to replace the CD with a DVD burner drive?
  This laptop does "cable select"?
  Guenter.

  Hello

  normally, you can only replace the existing by that same player, but you can visit http://www.toshiba-europe.com/storage and watch if a DVD burner fit!
  You need to know which drive you have!

  Good bye

• Satellite P300-h-13 - DVD burning problem

  Hello foks,.

  First of all, I'm from Holland and my English is not so good, sorry about that.

  I had my problem posted on http://laptopforums.toshiba.com/t5/General-Technology/bd-p/brd_gen and they lead me to him. So I hope that someone here has a solution to train me.
  The form of answers it will not work.

  The form of DVD playback going perfect, but burning no longer works after the first time I burned a DVD with success.

  Hmm seems strange
  Have you tried to delete upper and lower filters in the registry?
  If this is not the case, to do this:
  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the computer and check if you can write to DVD

• Satellite M55 - S139 DVD burn problem

  I tried 9 times to burn a DVD.
  I tried several software programs including InterVideo WinDVD came with the laptop, DVDFab Decrypter and those that I use most of the time, DVDShrink and ImgBurn.

  The log of the software indicates success, but most of the DVD will not play back - even on my laptop. Most of them won't open even - it just keeps telling me to insert a disk in the drive.

  Only once, I successfully burned a part of a DVD with InterVideo, and I could play on my external DVD player. But I was not able to duplicate my success (and only partially burned - perhaps InterVideo's just a demo). I tried to save as an ISO image and also just the files.

  I'm using Memorex DVD-R. Can someone help me please! I tried the DVD forums and nobody knows the answer. Is this a hardware problem?

  Here is the log of my last attempt:
  I 18:36:38 ImgBurn Version 1.2.0.0 started!
  I 18:36:38 Microsoft Windows XP Home Edition (5.1, Build 2600: Service Pack 2)
  I 18:36:38 initializing SPTI...
  I 18:36:38 looking for SCSI / ATAPI devices...
  I 18:36:57 found 1 DVD ± RW/RAM!
  I 18:37:33 operation started!
  I 18:37:33 Source file: C:\DVD. ISO
  I 18:37:33 file Source sectors: 1 760 786 (MODE1/2048)
  I 18:37:33 Source file size: 3,606,089,728 bytes
  I 18:37:33 Source file application identifier: DVD Shrink
  I 18:37:33 device destination: [1:0:0] MAST * a DVD-RAM UJ - 841 S 1.50 (D (ATA)
  I 18:37:33 Destination Media Type: DVD-R (disc ID: RITEKF1) (speeds: 1 x, 2 x)
  I 18:37:33 Destination media sectors: 2 297 888
  I 18:37:33 write Mode: DVD
  I 18:37:33 write Type: DAO
  I 18:37:33 write speed: MAX
  I have a link 18:37:33 size: Auto
  I 18:37:33 Test Mode: Yes
  I 18:37:33 BURN-Proof: enabled
  I 18:37:36 filling buffer...
  I 18:37:37 writing LeadIn...
  I 18:37:40 writing Image...
  I 18:59:19 Cache synchronization...
  I 18:59:25 cycling tray after Test write...
  I 18:59:29 operation successfully completed! -Duration: 00:21:55
  I 18:59:29 average write speed: 2 713 KB/s (2.0 x)-Maximum write rate: 2 800 KB/s (2.0 x)

  Hello

  This Protocol of engraving says nothing.
  These problems usually occur because of the CD/DVD media.
  I put t know if you tried, but you should check out the various media CD and DVD from different manufacturers.
  Well, try to use Nero burning Rom program.
  It s a great program and I m very happy