Satellite P300 19 p - CD/DVD burning problem

Similar Questions

• DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. Now, I've added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers, and a stop at 01:29:32:17 (th

  DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. I have now added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers and a cleat to 01:29:32:17 (the end of the film). The combustion is interrupted with a message to watch a C:\Users\ianle_000\Documents\20151206160446.iso file. There is no file. The message also provides a link for an explanation. This Web page is impossible to obtain. I'm running on a PC with Windows 8.1.

  Thank you once again. I burned the DVD!

  It is the first film for which I have reached the stage of burning. I'm not sure why she didn't in the first place. I tried to burn the "no menu" version, but at the time, was shot the DVD itself - I wonder when he reached this point?

  So, I burned the "no menu" version to another DVD, that worked, then the version of menu, with no cleat to a third DVD, which reads perfectly.

  Now that I have a successful routine, I'll stick to it.

  Thanks for all your help.

  I'll close this discussion now.

• Satellite M50 CD/DVD burning problems

  I recently puirchased a Satellite M50 with the CD/DVD Multi-lecteur. Toshiba literature indicates that it can write both write - once and several CD and DVD - writing.

  While I can burn on CD - RW and DVD - RW (DVD + RW) I can't burn discs CD - R or DVD-R (or DVD + R). The error message is something in the sense of ' does not support the driver (or reader) write once discs.

  Does anyone have any suggestions?

  Thank you

  Hello

  Well, it's not easy to say why you can t burn on some media. Maybe it s a malfunction of the media?
  Have you tried to burn CDs or DVDs from different manufacturers?
  I use TDK media and I m very happy. I found an interesting article on the CD/DVD burning.
  Check this: http://www.pcworld.idg.com.au/index.php/id;1400178792;fp;4;fpid;192

  Good bye

• Satellite P300 - 19 p: CD/DVD drive is trying to read the disk then ejects

  Hello

  I hope someone can help,

  I have a * Satellite P300 - 19 P *.
  I've had this laptop for 3 months and it's the last frustrating problem; occasionally when I insert a DVD or CD and close the CD tray tries to read the disc and then ejects the disc, even if I remove the drive and close the drive drawer pops out again,

  If I shut down the system and restart the problem still exists.
  I checked the drivers that are updated and the operating system is Windows Vista Home premium 32-bit.

  It is the fourth time this happens and the problem seems to fix it of self and reappears as and when!

  If anyone has had this problem or can anyone help because it makes me crazy.

  Hello!

  I think that s a problem with the CD/DVD drive.

  In your case, I would go to an ASP (authorized service provider). They should check your laptop and change the drive if necessary.
  Here, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  Good bye

• Updated by Satellite Pro 6000 with a DVD burner - technical question

  Hi all, I just bought a DVD burner that is adapted to the Bay of selection to replace the old DVD player...
  He came 'naked', so I thought I'd just disassemble the frame of the old drive and put it on the new...

  But: not the slightest Phillips screwdriver will integrate these screws; in fact, they look very special and I do not know how to remove...
  Should I have any instrument/tool special and if so, where do I get it? Maybe I'm too blonde...

  Someone here who can help?

  Thanks in advance! lionesse62

  Hello

  You need a special screwdriver to remove the module bay select (CD/DVD drive).
  A 2 mm screwdriver Phillips, a pilot of flat blade screw 4mm and a LHSTIX of 4mm screwdriver.

  I think you should visit a laptop computer technician if you n t have the right tool to remove these screws.

  However, if you want to remove the module bay select the Satellite Pro 6000 laptop then follow this instruction;

  (1) turn the computer
  (2) when the lock screw is in the locked position, remove the screws and fix it on the hole to keep her temporarily locking screws.
  (3) slide the lever and pull place the selectable bay module.

  After you remove the DVD rom, you need to remove the connector and the connector cover. The connector cover is fixed with screws of black 2M2x8 liaison.
  The frame is blocked with five super flat head white M2x3 screw.

  As I said, if you can not remove these screws and then ask a technician for help.

  Good bye

• Satellite P300-1FY - BSOD right video driver problem

  Hello

  I bought this laptop a month ago to replace my old who crashed without possibility of repair and I had problems with the video drivers since then. I hoped that the problem would resolve since I am in the middle of my exams and I really have time too much more time to spend to fix it myself, and I also can not him go to the store because I need some software for my exams.

  So the problem that in my view, lies in the video drivers for the graphics card ATI Mobility Radeon HD 3470. While I'm working on my laptop my screen all of a sudden turns black and my computer crashes (including the very unpleasant noise when I play music at the time) after 5 seconds it flashes live and displays a message indicating that a beelschermstuurprogramma niet Super perfect en is naked herstela. In English, it would be something like s video drivers did not work properly and have now been repaired.

  It is of course extremely irritating, but it became even more then a few weeks previously when I had a blue screen because of a similar error. What make me lose half an hour of work on my laptop. (and as someone who has had reviews knows, half an hour is not something you can always afford to lose) I ran the wizard, and he sent me to the ATI site to look for the drivers.
  The downside is that I could find many drivers, but none for the 3400 series. After an internet search for awhile I finally found some drivers for these series (or they pretend to be), however, this installer was corrupted. I also searched the Toshiba site, but I did find what I was looking for.

  The laptop also freezes from time to time without the screen turning black.

  Could someone help me with this problem?

  Louis-Philippe

  P.S.: quality of the keyboard is really bad also

  First of all, you should post the exact code of BSOD and what operating system you are using. Then, we can search for this problem and what is the reason for this on the Microsoft Knowledge Base.
  Then please send the BSOD code.

  In addition, I put t understand why you can t find a driver on the Toshiba site. Satellite P300-1FY belongs to the PSPCCE series and so I can find a display driver for XP and Vista. So where is the problem? Maybe you should try to install this driver:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  But before you install the driver, remove the old driver first. Reboot the laptop and clean your system with CCleaner. Restart the computer and then install the latest version on the Toshiba site.

  The display driver on the factory site Internet (ATI) doesn't work because it s only for cards of office and not for laptops. Then, you can t install and your laptop has only been tested with drivers of Toshiba.

  If the new driver doesn't work, you should try to update the BIOS too. You will find on the page of Toshiba.

  Good luck!!

• Satellite P300-22 how many DVD should I prepaire 4 creating recovery DVDs

  I'm french too, so don't be afraid of my mistakes 'no more! '

  I have a Toshiba Satellite P 300, and I want to create a recovery DVD.
  How many DVDs to 4.7 GB / by, if I prepaire for this creation?

  Thank you
  in fact, I have a Toshiba P300-22F,
  There is a hard drive failure, because I changed the C: partition size
  I have to restore the player to factory default state using the recovery DVD,
  but I don't create this DVD.

  One of my friends has a model Toshiba P300 - 1 5.
  so I try to create this DVD form his computer...

  Hello

  At first I want to give you advice on DVD, you must use. For a successful recovery creation DVD use DVD-R virgins. I created several media recovery on the models of different laptops, with DVD-R media always worked.

  On the market there are several portable Satellite and Satellite Pro P300 and image is not the same for each of them.
  Just for info:
  -Satellite P300-1GL I needed a blank media only, but
  -for Satellite Pro P300-149 I needed two of them

  So I think that you need one. When you start 'Toshiba Recovery Disc Creator' and choose the media you want to use it, you will be informed how many of them do you need.

  Good bye

• CD/DVD burner problems said that it is damaged or missing? Anyone has any ideas to help me solve this problem?

  Hello, I'm trying to fix my burner but I tried to uninstall and reboot my computer to see if the problem might be to set but he told me that my driver cd is missing or damaged, and I don't know what to do besides put my computer back to factory settings. So if anyone knows something I can do like that I don't have to put it back to factory settings it would be great.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: My CD/DVD burner does not work and it is said that it is damaged or missing. How can I fix it?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD Burner problem

  I'm writing a DVD mastered with data. He is preparing to go, and then tells me "There was an error burning disc."  I then put in another disc and it never passes the validation errors entry screen. I bought another brand of DVD media and also a new DVD burner. I put the slow write speed as I can.

  Hello FarmBoy59,

  I suggest that you run the fixit by following the link below. This will automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media:

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  If this does not work, I suggest that you follow the steps in the link below:

  http://support.Microsoft.com/kb/314060

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• DVD burning problems

  I have a compaq presario cumputer with vista OS and it has oem cd burner - dvd - rom and the dvd software burning in it. Lately in trying to put a movie on a dvd disc it gets all the way to 99% and stops. Any type of information is even thrown the disk, what is and how do I do thanks.

  Hello bobo johnson,.

  You might want to look over the following information on DVD burning in Windows Vista.
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  There is also a KB article, that you can use to automatically fix problems burning DVDs in Vista. Click on the number to view the article.
  KB Article ID: 929461 -CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  If please reply back and let us know if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite P300-h-13 - DVD burning problem

  Hello foks,.

  First of all, I'm from Holland and my English is not so good, sorry about that.

  I had my problem posted on http://laptopforums.toshiba.com/t5/General-Technology/bd-p/brd_gen and they lead me to him. So I hope that someone here has a solution to train me.
  The form of answers it will not work.

  The form of DVD playback going perfect, but burning no longer works after the first time I burned a DVD with success.

  Hmm seems strange
  Have you tried to delete upper and lower filters in the registry?
  If this is not the case, to do this:
  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the computer and check if you can write to DVD

• Satellite C850D - DVD burning problem

  Four months ago, I bought a laptop C850D - 12 L to replace my laptop computer another death.

  A couple of days, I tried to burn on a DVD jpg files; I had not done this before on the new machine.
  Everything seems fine until she reach the finishing process and the disk does not end.

  I tried to fire using Windows own engraving option, Nero and I even downloaded Ashampoo Burning Studio, but whenever I get the same results, i.e. nothing gets burned on a disc. I wasted 12 discs already try all variants of files, engraving, programs, etc., but each of them fails.

  I don't think it's the drive, I think it's a software problem, because * I am able to burn files to a CD *. The player plays also bought the DVD shop so that the part of okay - it's just finish burned DVD that is the problem.

  I downloaded a few programs that may have affected things, (Nero was already on the laptop when I bought it), they are: VLC player and DVD Styler - I downloaded them only that Windows 8 has no creation of DVD as Windows 7 programs don't.

  I phoned John Lewis, where I bought the PC, but they were not able to help, nor were Toshiba, who said it must be a software problem and asked me if I would like to speak to someone else for advice, even if it would cost me. seeing that I have a two year warranty on it, I refused.

  Drivers from the DVD were dated 2006 and a search inside the Device Manager said that these are the latest drivers.

  I went to the website of Toshiba and found a zip file driver, which has been updated in 2013. I downloaded which, to reveal the ten files, three of which are uncompressed application files. I tried to run all three of the latter with no apparent effect. I even tried to search these files when you try to update DVD drivers in Device Manager, but he acknowledged not all ten driver files (mentioned above), even though I copied these to a more convenient location in My Documents folder.

  I would be grateful for any suggestions as to how I can solve this problem.

  Best regards, Martin.

  > I don't think it's the drive, I think it's a software problem, because I am able to burn files to a CD.

  I think you use not entirely compatible DVD disks.
  It was my problem burning DVD disc.

  Recommend test you the discs DVD-R from different manufacturers but I had the best experience using R TDK and Verbatim DVD R

  PS: Windows system using common Microsoft CD/DVD driver. This is why there is no special driver for optical disc player sound is always part of the system.

• Satellite M55 - S139 DVD burn problem

  I tried 9 times to burn a DVD.
  I tried several software programs including InterVideo WinDVD came with the laptop, DVDFab Decrypter and those that I use most of the time, DVDShrink and ImgBurn.

  The log of the software indicates success, but most of the DVD will not play back - even on my laptop. Most of them won't open even - it just keeps telling me to insert a disk in the drive.

  Only once, I successfully burned a part of a DVD with InterVideo, and I could play on my external DVD player. But I was not able to duplicate my success (and only partially burned - perhaps InterVideo's just a demo). I tried to save as an ISO image and also just the files.

  I'm using Memorex DVD-R. Can someone help me please! I tried the DVD forums and nobody knows the answer. Is this a hardware problem?

  Here is the log of my last attempt:
  I 18:36:38 ImgBurn Version 1.2.0.0 started!
  I 18:36:38 Microsoft Windows XP Home Edition (5.1, Build 2600: Service Pack 2)
  I 18:36:38 initializing SPTI...
  I 18:36:38 looking for SCSI / ATAPI devices...
  I 18:36:57 found 1 DVD ± RW/RAM!
  I 18:37:33 operation started!
  I 18:37:33 Source file: C:\DVD. ISO
  I 18:37:33 file Source sectors: 1 760 786 (MODE1/2048)
  I 18:37:33 Source file size: 3,606,089,728 bytes
  I 18:37:33 Source file application identifier: DVD Shrink
  I 18:37:33 device destination: [1:0:0] MAST * a DVD-RAM UJ - 841 S 1.50 (D (ATA)
  I 18:37:33 Destination Media Type: DVD-R (disc ID: RITEKF1) (speeds: 1 x, 2 x)
  I 18:37:33 Destination media sectors: 2 297 888
  I 18:37:33 write Mode: DVD
  I 18:37:33 write Type: DAO
  I 18:37:33 write speed: MAX
  I have a link 18:37:33 size: Auto
  I 18:37:33 Test Mode: Yes
  I 18:37:33 BURN-Proof: enabled
  I 18:37:36 filling buffer...
  I 18:37:37 writing LeadIn...
  I 18:37:40 writing Image...
  I 18:59:19 Cache synchronization...
  I 18:59:25 cycling tray after Test write...
  I 18:59:29 operation successfully completed! -Duration: 00:21:55
  I 18:59:29 average write speed: 2 713 KB/s (2.0 x)-Maximum write rate: 2 800 KB/s (2.0 x)

  Hello

  This Protocol of engraving says nothing.
  These problems usually occur because of the CD/DVD media.
  I put t know if you tried, but you should check out the various media CD and DVD from different manufacturers.
  Well, try to use Nero burning Rom program.
  It s a great program and I m very happy

• Satellite A100 - 785 PSAANE - CD/DVD drive problem

  Hello friends,

  I have a Toshiba Satellite A100 - 785 PSAANE and its configurations are as follows:

  1.87 C2D Ghz, 1 GB of Ram (512 + 512), Windows Vista Basic, CD/DVD read/write...

  Question: Its been long enough, I m facing some problem with my optical drive. Whenever I insert a CD that is originally made by any company, it works fine. At the time when I insert a CD that is personally burned with any normal CD data / engraver of DVD or CD that have been created previously by the same laptop mentioned above, its been interpreted as a blank disc. The data on the drive are not displayed.

  For example: lets say if I insert a cd of the software as my webcam cd or cd of my printer they can be read normally and work very well. But at the point where I have to enter any cd that was burned by me that contains my personal files, it is read as a blank disc.

  This problem does not exist with any of the DVDs. that is not serious every dvd I insert either being a software normal dvd or one that is burned as a given personal dvd, everything works fine and all the data DVD can be read.

  I tried to reinstall the driver, I tried to reformat my laptop using the supplied with the notebook Toshiba Recovery CD, but the problem persists.

  Between a few months ago, I tried to do a few tweak, as firstly I have insert the cd in the drive and then turn off the reader of cd and then allowing it once again would actually read the cd. But after a few tries, it also stopped working.

  Now I have really no idea what should I do to get my CD to work normally.

  I hope that this message can help out me.

  Your help will be appreciated

  Thanks for your precious time

  Concerning

  Christophe

  Hi Claudia,.

  To be honest, I never heard A785 Satellite.
  You should check the model number again, as wrote Akuma. It would be important to know.

  But in General if you have the same problems after using the Toshiba Recovery disk it seems to be a bad material work because the recovery disc can restore the factory settings.

• Satellite 1400-503 with a DVD + R problem

  Hello

  I have a problem with my dvd - rom. family have burned me a dvd + R. Now I can't play it on my laptop. So I tested a dvd - R and it works well.

  A friend of mine told me that I can change some configuration of something like that, then I can play both formats. Can someone help me with this?

  Hello

  I don't think that it is a parameter to change. The reader must support the format.

  It's not very often if the machine is not very very new. If you get this problem with the player integrated to your Sat1400-503, and it is not replaced by someone not supported, so I'm very sure that it does not support the DVD + R format.

  BR

  Tom