Satellite C870-12F - problems after BSOD

Hello

Well 15 minutes ago, I worked very well with my laptop computer and all of a sudden, I get the bsod... ?

Then it restarts and after waiting 5 minutes for the windows screen to disappear to a welcome screen, it does not appear... So I tried the recovery.

NA not work it gave me an error... While writing on this subject all of a sudden he started through the office...

How is that even possible...

There are two possible reasons why BSODS happen.

(1) serious software problem
(2) hardware problem / fault

In the case of point 1) system recovery / laptop should solve this problem. But it doesn't have t
So, I think that, in your case, the material started to malfunction.

You want to know what part might not work.
Well, I think that these details can be provided only by an engineer who has already checked the aircraft and ran some diagnostic software.

In my opinion its HARD drive problem isn't. If something's HARD drive, unit turns on properly but would not boot the system.
Possible hardware parts that could be affected are: module of RAM or the motherboard.

RAM problems can be solved easily in replacement of the module, but for motherboard problems, the fix for laptop can be very expensive in case the warranty isn't valid.

Tags: Toshiba

Similar Questions

  • Satellite C870-12F - FN Swapping keys and function keys

    I just bought my Satellite C870-12F and I noticed the only work of function keys (F1, F2 etc) when you use the Fn key, I was wondering if I can 'swap' them, while I have to press Fn first and then to increase brightness, for example.

    I'm used to having the keys of F or primary, without an extra key to activate.

    As far as I know, you cannot change anything.
    Keys Flash cards (Fx) can be used in combination with the FN key only.

  • Satellite C75 - Performace problems after recovery

    After that I got my C75 Satellite back to the factory settings (who took severala hours) I suffer from drastic performance problems. Games that were running with 50 images per second, now have about 10 frames per second.

    What could be the problem and what to do?

    Are you sure that the configuration of the OS is 100% the same as before?
    Laptop slower is usually too?

  • Satellite A200 PSAE6E lights after BSOD

    Hello. (Sorry for my English)

    Last night I had the BSOD (driver_IRQ_NOT_LESS_OR_EQUAL). After memory dump that I restart laptop, but it doesn't.
    Starting the fan for 1-2 seconds, I hear some noise from the DVD player, led to power is blue, same as witness to power, seeing the battery cord is dark when the laptop is disconnected from the AC.

    Hello

    My laptop crashed and could not start because of problems with RAM.
    My modules of memory are dead for no apparent reason

    In my opinion the RAM modules need to be checked.
    Remove one and check both in each slot
    But it would be better to use the new modules.

    However, if the problem is not related to modules of RAM then it must be a serious problem of material possibly a motherboard or something like that

  • Satellite A205-S5831 - problems after XP downgrad

    Hello

    I am an Indian engineer
    I brought a brand new Toshiba Satellite A205-S5831 us country.
    Sound have Windows Vista Home Premium. But I have this downgrade to WinXP SP2 (pirates)
    His work nice but have a few following problem!

    (1) book suddenly stop treatment in working time and shows a blue screen-... His show at the last line that - Technical Support.
    Its happen 3 - 4 times in 4 months and when I restart the notebook and then its working properly

    (2) my Bluetooth does not work - I have already installed - Blutooh battery and monitor also and even for WI - FI and LAN wireless... etc. Nothing works.
    (3) speed is very slow in everything like in the Installation and other things - I use Visual Studio.net2005, SQL server2000
    (4) problem when Internet access... very slow
    (5) all other application like audio, drivers and silent acoustics etc.. But above all are not working do not and do not have

    Please answer me as soon as possible
    All drivers are Windows XP for Toshiba Notebook. Tell me any website that provide all the XP drivers.
    I download maximum application of www.csd.toshiba.com...

    Please help me

    Hello

    As I see that you posted several discussions on the same issues. I imagine that you are not happy because of all these issues.
    (1) what to write about BSOD? Nobody here can say with certainty why this happen. As you know, it may be because of some software pre-installed. Who knows what you have installed on your laptop? Accurate diagnosis is definitely not possible.
    (2) install all the missing drivers, Toshiba tools and utilities. Each of them should be available on the Toshiba U.S. support page.
    (3) in this regard, we can only speculate. The fact is that this model of laptop pre-installed with Windows XP Home edition and optimized operating system should work well and smoothly.
    (4) I don't know what answer you expect on this subject. Make sure that the network adapter is properly installed. All others you must clarify with network administrator in your company or your Internet service provider
    (5) no comments for this.

    If you have a model of cell phone US Download all the stuff of http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp

    Boyfriend sorry but that's all I can say to all this.

  • Re: Satellite L500D - boot problem after BIOS update

    I downloaded the new version of BIOS (v1.4) official Toshiba site to update my computer Satellite L500D (PSLK0A - 00U009). But after the update, Windows 7 cannot start, Windows logo appears for a while then it restarts automatically. Windows then goes into repair mode. I followed the instructions on the screen to fix. But it does not work.
    When I reinstalled Windows, the computer worked fine until Windows Update told me to restart the computer. The computer dies again.

    I think that this version of BIOS has a problem. I wonder if there is a way to downgrade the BIOS to the earlier version. I found some instructions on the net to use the Phoenix recovery disk, but I have no file disk and BIOS.
    Please Please HELP, very appreciate.

    TKS

    Try to install the OS to help original Toshiba recovery image. After disabling automatic Microsoft updates to install. When you get the message about controlled initially available updates and install important updates only.

    Check it once more to see if the same thing will happen again. Display the results.

  • Satellite A300D keyboard problem after using an external USB keyboard

    I use a Satellite A300D series laptop and while at home, I use a UBS keyboard on it, but once the laptop is used without a USB keyboard only some of the keys seem to work, I get number 6 when I press the i key.

    I thought that this could be because the USB keyboard would not have been arrested properaly when I unplugged and the portable thought he was always there, but even after the stop of the USB keyboard is the same!

    All the answers to my problem?

    Hello

    On my Satellite A300, I can get 3 when I press L. It can be done if you are using the FN + F11 key combination.
    Perhaps this option enabled on your laptop?

  • Satellite C850 - Bluetooth problem after update Win 10

    Hello
    I use a Toshiba satellite laptop. Model number Satellite C850 PSC74G-010001.
    Windows Pro 64 bit version 10 installed... After this my bluetooth does not work...

    When I tried to update, it does not work... Realtek Bluetooth 4.0 display Module does not work... bluetooth option in setting is totally gone... wht should I do? ........

    Nobody seems to have any answers do Nathaniel? Pathetic.

  • Satellite L730 - Bluetooth problem after upgrade to Windows 10

    Hello. I use a portable Satellite L730 and the only thing that would prevent me from upgrading to Windows 10 is the problem of Bluetooth. RFHID, RFCOMM and RFBUS will not work properly because there are no drivers. Apart from that, the computer there is no requirement of meeting problem Windows 10.

    So is it possible that a sollution to this problem will be provided anytime soon?

    Hello

    In most cases, BT does not work due to lack of BT software.
    The point is that most laptops use a module for WLan and BT.
    This combo module WLan/BT requires additional driver filter...

    According to your WLan / module BT, you will need to install the filter for the BT driver package.
    In most cases the 8 Win / filter package 8.1 Bluetooth driver should work under Win 10...

    But you have to watch for the manufacturer of modules... There are different modules like Atheros, Intel or Realtek

  • Satellite p300-212 problems after downgrade to xp (yellow? and!)

    Hello

    I had the same problem as the guy FOM this thread---> [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=174977𪮁 | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=174977𪮁]
    I lowered my Satellite P300-212 from Vista to XP. I used an installation Win XP CD of Win professional XP including Service Pack 3.
    Then I installed all the drivers from the Toshiba site.
    But I still have a yellow! in the Device Manager to the "Audio device on High Definition Bus". The details of this device show "HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1001\5 & 3B6F18F1 & 0 & 0001"
    So I don't know, what driver I need to take to solve this problem. Rather, modemdriver etc are all installed and work fine!
    In the thread I linked above, the guy only has not copied driver WICH he installed manually. :(

    I hope that someone of you can help!

    Best wishes.

    greatwolfman

    Hello

    You should go to remove device manager and scream this device with the yellow! and?
    Restart the unit.

    In addition you must update Win XP for the last State because there are many patches that are required under Win XP latest series laptop.

  • Satellite 2210CDT: two problems after installing Win XP

    Hello! Maby it sounds funny but I found Toshiba Satellite 2210CDT inside my closet, installed Windows XP (oem supplied with the mouse, I bought some time ago) and it works!
    The only problems I have are:
    * When the system is in hibernation, it is impossible to 'wake up' (I remmember in Win98 in this laptop there is problem);
    * I don't really have the tools provided with Win98 came with the laptop (ie.battery status and so...)

    Appreciate the help, Mike

    PS sorry if I post in a bad place in the forum, but this is my first post (I hope you can understend...)

    Hello

    Satellite 2210CDT is an ancient and you should be lucky that Windows XP runs on you laptop.
    But this unit has been designed and delivered before the era Windows XP started.
    I checked the page of the Toshiba driver and there is no drivers for Windows XP. I found drivers only for W2k and Win98.
    Unfortunately, if you use the Win XP on your laptop you must do without drivers Toshiba, tools and utilities.

    I found a utility to do Hibernation for Win98 on the Toshiba site. I think that this is a utility that is important to use the hibernation mode. But as I said, it is available for Win98.

  • Satellite L50D - Boot problems after replacing the hard drive

    I just upgraded my hard drive of the pathetic crod 5400 they provide to a SSHD@7200rpm, but now have a major issue.

    I initially image the operating system from the old hard drive to the new drive and have had chronic start-up problems (1-3-4 attempts to start to succeed if it fails at any time (often to the Toshiba start screen)).

    I reinstalled from a drive under Win 8.1 plain own ENT (trying to avoid the bloatware) and it is exactly the same number and is what I used to format the laptop very well with previously and had previously worked.

    I tried reformatting and reinstalling (by removing all partitions on each attempt) to the CSM, unsafe UEFI and UEFI secure. MCS is a straight line never works not proceed and both UEFI methods have the same exact result.

    I tried with original restore disks and it seems to work (not had time to fully test) but I don't want the bloatware and it shouldn't be serious since, if I were a customer who forgot to make restore disks (too often) and just have to have a failed hard drive or replaced sacrificed the laptop would be now a door stop.

    This seems as bad as Apple to lock people in.

    So I would appreciate ideas of people to please, I don't know if there is a program that is supposed to take place on a new drive as PS3 etc (I doubt it), but that leads me into the wall, and will be the last time that I consider Toshiba as anything other than a joke, if there is no solution.

    I had to replace the hard disks many times in my previous Toshiba laptops and were devoid of this crod, it has something to do with UEFI which seems more a nuisance than a help right now.

    TIA.

    Hello

    In my opinion, you should first check if the startup problem is related to the new installed HARD drive or new installed system.
    You said that the laptop fails to start up often to the Toshiba start screen.

    The splash screen appears during the POST (power on self-test) procedure. During this test, the material will be checked.
    I m wondering if the hybrid SSD/HDD isn't recognised by the BIOS during this particular step.

    From my point of few, this could be the reason why the system cannot be started.

    Another important note:
    The 8.1 win requires enable start secure as well as the UEFI boot mode.
    Therefore, you must enable both options in the BIOS.

    Last but not least check if you are using the latest BIOS version as latest firmware for the hybrid SSD/HDD

  • Webcam does not work on my Satellite C870-12F

    Hello!

    My laptop 2 week old webcam has stopped working. I was looking a reinstal but could not find it on the Toshiba site. I still have the pictogram of the webcam, but when I select, it know: "Webcam driver open failed, please restart your computer or camera." I use windows 7...

    Thank you!

    Driver webcam for your Satellite, you can find HERE.
    Remove the preinstalled version, restart your computer and install this version.

    Please post comments.

  • Satellite P100 - display problem after installing the Samsumg software

    Hello

    I have a Toshiba P100-PSPA3 and just bought a new external monitor Sincmaster from Samsung. I installed it yesterday and everything works fine, I just plug in and the laptop recognizes it as a second monitor. Then I noticed the monitor comes with a CD and they recommend you to install the components of this CD.

    I installed the driver and still works fine but then I installed a software called * Magic money *, it is said that I should make a new start, I did and the image comes in the second monitor, * my laptop screen is black.*
    Then I begin to try all the possible solution I had in my head. I open this Magic Tune, and he says that it s not compatible with my computer, so I uninstall it. I have downloaded the drivers from Nvidia, Toshiba, installed again and again doesn´t work.

    I prove with the nvidia settings and the West without change. NVIDIA doesn´t recognize my laptop as a monitor, screen it recognizes just the Samsumg Sincmaster.

    I looked for people with the same problem in other forums and a possible solution was to turn off the computer, remove the battery and press the power for a few seconds, trying to carry out the computer. I did and it didn t work.

    Someone here could give me a light? I m totally lost now and I have to work with my computer in the next few days!
    Thank you very much
    Ivan

    Hello

    This software is not known to me and it is important to say that notebook manufacturers may not support some third part software.

    I put t know if this software must be preinstalled but I'm sure you can use your external display without it. When the external display is connected, you can switch between the LCD and external monitor by using the FN + F5 key combination. If you want to extend the display outside a use Windows display settings. It should work. I tested several laptop Toshiba with a few different monitors in my office and I n t noticed no problem.

    Have you already solved your problem or you are still looking for the solution?

  • Power power on Satellite C870-1FZ problem

    I use my laptop on WIndows 8.1 - 64 bit.

    When the power cable and the battery are connected, the laptop just will not start. When I remove the battery and use only the power cable it starts and runs normally. It also seems that the battery does not load.

    Who has a solution for this problem?

    Hello

    I m bit confused why the laptop does not power upward with battery connected.

    Generally even if the battery would not charge due to the age of the battery, the laptop must turn on correctly.

    However, if does not resemble the adapter would be defective because the laptop works properly using the main power supply.

    That's why I came to the conclusion that the battery or card mother s electronic power supply could cause this problem.

    As a new battery is much cheaper as a new motherboard, I recommend you to check the functionality of the laptop using another, compatible and good working battery.

Maybe you are looking for

  • JB soak Test for XT912 - using old kernel ICS?

    Hey people, Just curious to know a few things about the trial of impregnation... My boyfriend showed me his phone and I have a pull and was satisfied with the fluidity of the operating system. There was something that I noticed though. When I checked

  • Impossible to use the Launcher to WPI

    Hello I have problems that I can't install anything that uses the Launcher of WPI. If I try to start it, it says that the Web Platform Installer could not start and communicate with the WPI forum. They don't seem to have an answer. On what I believe,

  • How can I get rid of a very nasty virus?

    I have a virus that is very nasty on my laptop and I'm at a total loss about how to get rid of it.  He won't let me do a system restore, and it seems that each file is infected.  I need help!

  • Software BlackBerry Blackberry link has stop working

    Gud Sir, I was using my BlackBerry B4 link & is well, today I have open it & said Blackberry link has a work stoppage not working, pls I need help with this pls, I using Windows 10 on it.

  • Encryption on Blackberry?

    I have an application developed on BlackBerry JDE 5.0.0, that encrypts a string using THE algorithm with ECB mode. After encryption, the result is encoded by base64 encoding. But when I compare the result I get my encryption method with the result I