Satellite - E drive not been used

Similar Questions

• How can I know if an external drive has been used for Time Machine and what computer it came with too?

  How can I know if an external drive has been used for Time Machine and what computer it came with too?

  I have several laptops and iMacs. I spent the relocation of the year and only used the MacBook Pro.

  Now I'm trying to figure out which drive goes with which computer

  I connected just a disk seagate 1.5 t and the first thing he did was to ask if I wanted to use it as a Time Machine drive.

  (1) if it is the TM disk accompanying this computer don't would not it have just started upward automatically?

  (2) what happens if I would have said yes?

  (3) I don't even know if it's been activated for TM. Is there a way to tell? It may hold just for iMovie files and other programs associated with a computer from my past.

  All readers of backup Time Machine contains a folder named: Backups.backupdb. If you open this folder, you'll find another folder with the name of the computer that has been saved. If several computers have been saved on the same disk, you will have several folders.

• Windows 2002 service pack 2 should be updated? I can't do. Has not been used for while.

  CPU has not been used for a year. All updates have not implemented. Windows should really be updated. Could not get the update of windows, or difficulty of it.to helps. I don't know why?

  There is no "windows 2002."

  Did you mean Windows XP Service Pack 2 installed or...?

• How can I find out what programs has not been used for awhile so I can remove from Control Panel

  Original title: Control Panel

  How can I find out what programs has not been used for awhile so I can remove from Control Panel

  It is removed, it's just in your own knowledge and memory.  If you know that you have not used and don't want that, then you can delete it.  It's entirely your choice

• Update on a laptop that has not been used in almost 1 year

  My husbands cell phone has not been used since last October. He was diagnosed with leukaemia, shortly after he had and has not shown an interest to learn to use it until now. It has Windows 8 and we want to do the free update of Windows 10. The laptop wants to 79 updates before we start download Windows 10. He has been on and downloading these updates for more than 3 hours and the screen still says 0% complete. Is it normal to take so long after being unused for so long? Husband and I went to the challenge of the technology. Any help is greatly appreciated.

  There are many updates and update process may take several hours. You can suddenly find that updates show that almost complete.

  If there is anything on the laptop that you want to keep:

  Download and create a Windows 8.1 installation media and do a clean install of it. See creating installation for Windows 8.1 media. Accepting any offer to install updates during installation. 8.1 Windows installation media last will accept the keys to Windows 8. If your key is in the BIOS of the laptop, it will be detected automatically.

  At the end of the installation, you will be prompted to upgrade to Windows 10 and will be able to do an immediate upgrade Windows 10 without updating the Windows 8.1 installation.

  Visit the support of the manufacturer of your laptop to see if there are model specific drivers you need. Installing Windows 8.1 and 10 will not provide the latest drivers.

  If you want to keep the existing installed applications and files, you can create 8.1 Windows installation media and run the setup.exe on it then in Windows 8.

• Coupon code does not work and has not been used before - stale code? Software purchased in 2011

  I was trying just to 'chat' with someone, and they're signing. My CS5 coupon code does not work on my computer - I'm re-entered several times to ensure that there are no errors. It has not been used before. I bought the [Mac] software in 2011 and was able at the time to buy a Mac to install the software on. Does anyone have advice? Or y at - it someone with Adobe that can help?

  Using redemption code

  Contact adobe support, https://helpx.adobe.com/contact.html

• My laptop has not been used for a year and now does not connect to wireless internet?

  My wife's cell phone has recently been repaired (power Cable plug damage) and has been missing for a year. We both used my laptop which connects to the internet just fine. The laptop connects to the network but does not connect to the internet. I tried all suggestions that our Windows Diagnostics, as well as other ideas for myself but had no chance. The continuous diagnostic message to read "cannot communicate with primary DNS 194.168.4.100 server. My only thought is that perhaps because of the amount of time it has been used as the network driver can be updated, although I don't know how to upgrade without connecting to the net?

  Hello

  Follow the suggestions and then check:

  Method 1.

  Let us reset TCP/IP and check.
  To reset TCP/IP stack to go to this article and follow the instructions.
  http://support.Microsoft.com/kb/299357
  
  Method 2.
  Step 1.
  1 connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
  2. make sure that you are in Setup-> basic configuration category.
  3. scroll down until you see "DHCP Server" - if it is disabled, select 'enable '.
  4 enable DHCP if you want, you can change the number that starts the DHCP IP setting. (This is optional)
  5. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
  6. scroll and click 'Save Settings'.

  Step 2.
  1. click on start and then Control Panel.
  2. go to network and sharing Center and then click on change adapter settings.
  3. right click on the connection to the Local network and select Properties.
  4. Select Internet Protocol Version 6, and then click Properties.
  5. select Obtain DNS server automatically an address and press Ok.
  6. choose obtain an IP address automatically.
  7. repeat the steps for Internet Protocol version 4 as well.

  See also:

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems Using event logs Windows Network Diagnostics to troubleshoot network http://windows.microsoft.com/en-US/windows-vista/Using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• It is safe to connect to the internet to update XP if the computer has not been used for a good year or so?

  Hi all - I have another laptop which has remained unused for probably over a year or more, and I want to start using it again. It works under XP, and currently has Service Pack 2 installed. My question is: is it safe to connect to the internet now and start downloading all the required Windows updates? My concern is that, as just like the anti-virus, firewall, even Windows itself have not been updated in so long, it would be imprudent to start the internet connection at this point? Is it safe to go forward and to connect and update, or is it better to download updates etc on another computer, put it on a disc/USB and then use it to install updates? Thanks in advance!

  Consider that he is therefore authorized to connect the computer to our broadband services to update the anti-anti-virus/firewall?

  Yes, as long as the firewall is turned on and that's the first thing you do online (i.e., no surfing, no audit e-mail, no chat, no download of anything else).

  The Windows Security Center will let you know if something went wrong.

  You're welcome and thank you very much for your comments!

• How do I know which elements have not been used

  Hello

  I'm a noob, but get the hand of it. Here's my question: I started with about 20 video files (2 h of images). All the files, I created about 60 "subitems" carefully conducted in a bin. Then I doubled all the 60 clips one by one. However, I accidentally deleted one of these clips in the middle (and cannot cancel because it was some time ago) and I don't know which clip is has.

  What I want to do is to select the tray with the subitems to 60 and identify the one that (perhaps more than one actually) have NOT been inserted in my sequence. Is it possible to do? Similar to Excel when you select a formula and it indicates what cells was in charge, could I select my sequence and it tells me that the clips are 'in charge '? Any other suggestions?

  Thank you

  There is a "Use of video" column in the project window.  This should show you that it isn't currently in your sequence as well.

• Windows Update 09/02/2016 fails to install on my Toshiba Satellite L655. I want to install this detected (Toshiba has not been used since 25/01/2016)

  I want to install the update 09/02/2016 W7 so I can move on to W10.  Did not use the Toshiba Satellite L655 since 01/25/20.  Want this ancient system to be available and up-to-date Windows down the line if IU need to use.  How can I work around this problem, or force the update to install

  Install the latest version of the windows update client.

  https://support.Microsoft.com/en-us/KB/3161608

  Make sure you do not have a search for updated online running in background during manual installation.

  Best regards, VZ

• Satellite P100 does not start using Intel 5300 WLan

  Does anyone has replaced the Satellite P100 with one of these Intel 5300 WLan card.
  Help when I plug it into the slot pci and boot up my lappy, nothing happens.

  However when I plug my Wlan Intel 3945abg card in all starts fine.

  What is the problem?

  Hello

  I think that you used just a WLan card is not compatible

  As far as I know that the laptop has been already equipped with a network based on your assignment and Mini-PCI Wireless card laptop works properly using the previous WLan card

  If you want to solve this problem of-> use the supported wireless network card!

• A satellite - DVD Drive not seen by Windows Explorer

  The DVD on D deive is not seen by windows Explorer. Used to work, it has now disappeared. The dvd hardwars starts at the start, then stop.

  Any ideas anyone?

  Hello

  You see the DVD drive in Device Manager and you then yellow exclamation points?
  Maybe you should just remove the drive from Device Manager and reboot the laptop. Select the drive in the Device Manager, right-click on it and choose uninstall. Then, restart the laptop.

  If it doesn't work try the workaround posted by Akuma to remove upper and lower filters.

  Good bye

• I get the error message "user profile service service has no logon. User profile cannot be loaded. No response on this blog has not been useful.

  I use Windows Vista. There is an account called, set up, but he is not an administrator account and I can't change the administrator. I don't have a recovery cd. There is no "HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft / / Windows NT/CurrentVersion/ProfileList. It happened when I used a flash drive and my computer froze and delete my profile. In addition, my computer can not load in safe mode. Any suggestion would be great.

  You have another admin account , you can connect?
  If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly press F8 key until you see a black and white screen. The top/down arrow and select Safe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a restore system first, if no help, run the Microsoft tutorial support listed below.

  2. If you cannot connect to your own account, you see another
  next to your admin account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Logon to it and again
  do a restore system first, if no help, run the tutorial from Microsoft technical support 
  below.

  If you are able to log on in safe mode, do a system restore. Choose a
  Date of when you were able to log in NORMAL MODE as your restore point.
  How to restore the system:
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods, go through one by one.
  Method 3 has a "fix it for me" application

• Re: Windows stops completely when Satellite C855-11F not in use

  Windows 7 shuts down completely when laptop is not used, close all programs.
  When I want to start using it again I get screen "Windows did not shut down correctly" and restart.

  Other pc normally require any password to return to the previous state. I would like to know how to change this, pls?

  Hallo

  I understand what is happening, but you put offer of pertinent information for a better understanding.
  Are you using the original OS that you got with your laptop?
  Have you installed any additional software that may be the reason for the unexpected shutdown?
  Is your laptop to the power supply when this happens?
  Did some shopping application when this happens (download)?

  > Other PCs require normally just password to return to the previous state. I would like to know how to change this, pls?
  I put t understand what do you mean with that. What password and previous state?

  What you see on your laptop is normal unexpected shutdown.

• Iconia, a B1-810 has not been used for some time.

  When it is connected for charging that a lightning icon briefly appears followed by no action apparent. Occasionally, a disconnected a power plug icon is also displayed. When I press the side power button Acer page appears very briefly but will not stay. I can't get any of these actions without the connection of the power supply. What do the icons mean exactly and why can't some life to my shelf please?

  Looks like you're not charge or charge very slowly. You use the Acer charger? Have you tried to load the night before?