Satellite L series will not burn CD - Rs

Similar Questions

• Satellite P10: The drive will not burn DVD

  Hope someone can help me,

  I have a Toshiba Satellite P10 and have just received some photos software, burning
  But my drive will not burn DVD, I try with discs DVD - RW which must work my laptop.
  What is happening is when it comes of the burn on the part of the disk of the process he starts, but it fails.

  I tried to burn it with Nero, but even if I burn OK on any CD discs with this software it will not work on DVD discs. It's really annoying because when the burning process it fails so that it makes the DVD - RW disc seem curupt and then my drive has problems mounting the disc to try a deletion once more.

  I have the Nero log file failed
  Done if it's any help to anyone.

  A big thank you Michael.

  Hello

  What about different DVD media? Have you tested the media DVD-R or DVD + R common?
  Have you tried different brands of DVD?
  I can't give you a properly answer why the drive can't burn your DVD - RW, but to my knowledge not every media is supported by the player.
  So I think you should check different DVDs.

• my screen is blue and the playlist will not burn to a cd

  try to burn a playlist to a cd.  Playlist will not burn.

  You use a PC or a Mac - I can then ask for your message to be moved to the iTunes for Windows or iTunes for Mac forum

• Satellite M35x-S161 will not work on battery

  My Toshiba Satellite M35x-S161 will not work on battery power.

  With external power supply, the battery status icon see the stack of 90 to 99%, but if the external connection is deleted the computer will immediately dead.

  By pressing the power button with the power supply disconnected, nothing happens. There is no light.

  I suspect the battery is dead, but why it doesn't show 90-99% full?

  Hello

  In my opinion, your battery is dead.
  My old battery was always full, but I could use the laptop to only for 1 min.
  While the battery was empty

  There is nothing unusual issues you may encounter in using mobile phones
  The battery can die one day.

  In my opinion, the battery needs to be replaced

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• We will not burn SN-S082H CD player using iTunes - error 2131

  Hello

  I just bought a laptop PC Nextday with the SN-S082H command that will not burn CD using Itunes - error 2131 (I think from memory).

  Could someone let me know the solution to this?

  Thank you, Rob.

  I think that this error due to consistent problems.
  I read in some articles of the computer that the iTunes software is not fully compatible with different CD/DVD drives firmware.

• Satellite 2410-303 will not read the product recovery CD

  My satellite 2410-303 will not read my product recovery CD.
  When I turned off my pc with the drive in, I get messages saying that the disk is not formatted correctly.

  Hello

  It of weird, is your CD the other disc drive? Have you tried to read your cd of restoration with another computer? If the same error occurs on another computer system, then the cd is probably defective.

  Just a question: I guess you want to recover your machine, Don t you?

  See you soon

• Optical drive will not burn

  I saw that there are many other positions on this, and although I found others who had descriptions which were similar to mine, the patch did not work.

  My specs:

  Windows 7 64-bit SP1

  H8 HP desktop PC - 1360t

  My optical drive: DH16ACSHR

  My driver for the optical drive is the cdrom.sys, the version of the file: 6.1.7601.17514, date 21/06/2006 driver

  When I bought my computer, I did a clean install of Windows 7 64-bit. A ran all updates at once and drive perfectly serious. A few weeks later, it will not burn. I use Windows to burn simply .pdf files, and it gets to the point where it says 'burn', but after I click on burn the dialog box disappears. The drive makes noise and rotates the disk and writes data to it, but the dialog box never pops up or check the disk. It shows no more burn % completeness. If I try to remove the disc, the drive does not open. If I open with a paper clip, because the disk rotates, it sure is beating sounds and jams. When I open the drive and the drive, the drive clearly has written data to, but it cannot be read by other readers. It just says: the disc is no longer a Virgin, but I cannot see what is on it.

  I HAVE ALREADY TRIED:

  Remove/uninstall the driver

  Checking the registry entry for the upper and lower entrances, THERE ARE NONE

  Being run/scannow - Windows comes up saying that it could not find any problems, all right.

  Update driver - he says I have the latest driver

  Roll back the driver - he says that there is no driver installed previously

  I had a HP Office before a different model and exactly the same thing happened then. When I first came to this other, it burns very well, so I thought that maybe it was a problem with the previous machine... but then after a few weeks it started doing the same thing.

  I'm confused because when I look at the release date for the driver, it's super old, and he says it's the latest version... but Microsoft lists 50 updates to it at least between then and now, some of them as recently as June. I can't seem to find a way to download this driver common windows by itself and install it this way or the other.

  I refuse to do a complete reinstall because I do not think that it will solve the problem more than temporarily. Within the company, it is the fourth total office with what has happened, and whenever we do a clean install, it works at first but then goes back to the same problem again.

  Hoping someone has an idea where I can get a newer than 2006 for this device driver.

  Hello

  Hope the following patch helps:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Good luck.

• Satellite A 200 will not be stopped correctly

  My Satellite A 200 will not be closed down whemn I close the system. Only solution I can use is now 'hard' shut down, using power button, but this isn't the right way.

  Is this a known poblem? Can you give us some solution?
  Jeroen pool

  Maybe a process that runs in the context of the operating system can't shut down properly and therefore the Windows operating system cannot stop.
  I've seen questions on different computers.

  I think you should try to clean the registry with the 3rd tools i.e. CCLeaner. It s for free and can be downloaded from various sites.

  If it does not help check if the new OS install helps solve this problem.

• Windows 7 starter edition will not burn DVD and will not format

  • My recorder DVD format player, will play and burn DVDs when I move my dvd drive to another computer running windows vista
  • It will not burn a dvd or format a dvd rw disc when it is attached to my netbook toshiba running windows starter 7

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  Engraving for Windows 7 Info

  If your computer has a CD or DVD burner, you can copy files to a recordable disc. This process is called burning a disc. Windows Burns discs in the active file system format or in ISO image format, depending on which disc format you choose.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  I have a lightscribe, CD/DVD player, and I started having problems about a month ago... I tried to burn a lightsribe CD and my computer told me that I didn't have a CD Lightscribe drive (I!)... then when I just tried to burn the music on the CD, he didn't do it either... Finally a week ago, I tried to play a movie on my laptop, and that does not work either.

  When I insert in the film or the cd, the drive lights up and I can hear the work, but it is as if she has no connection with my laptop and my laptop is not picking up the CD/DVD drive try to play a movie or a cd.

  A friend suggested that I go to the HP website and am trying to download a driver, but I didn't know what to do once I got to this website, and I don't know if it will work.

  If you know how to solve this problem, or if you have had a similar problem with your computer, please help, thank you.

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• My Windows Media Player will not burn a CD, it is 99%, then will not be finished.

  My Windows Media Player will not burn a CD, it is 99%, then will not be finished. Used to work fine, no problems then just started does not. I tried Microsoft FixIT & or troubleshooting solved my problem. What can I do to fix this?

  Hello

  1. what error message you get when it ceases to burn a CD?

  2 What problem confined to a particular CD?

  3 did you change on your computer before the show?

  4. have you tried Open-the-playing-and-burning-cds-dvds-and-bluray-discs-troubleshooter?

  Method 1: Try a different CD and check if it helps:

   

  Method 2: Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

   

   

  Method 3: Try to perform the clean boot and check if it helps, here is the link:

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• TSST TS-L632 will not burn a DVD

  TSST TS-L632 will load a DVD and DVD to show, but even after trying the new firmware it will not burn. Also I tried new DVDs and I tried Opti Drive Control and it does not create a test disc. ConvertXtoDVD goes through the process to the end, but does not burn the DVD. No error message appears.

  Hi DeputydD,

  If Dell diagnostics failed, then you need to replace the DVD drive. They are fairly easy to find for your model laptop and pretty inexpensive ($25-40).

• Win7 dvd & cd maker will not burn for all formats

  Windows 7 Ultimate (used to have xp, & it worked) will not burn cds & DVD for playback in standalone players. Will only play on the pc.

  The version of the audio driver is now 6.1.7601.17514

  The modem is Conexnt

  VGA driver nVidiaMotherboard is: NVIDIA

  Windows 7 Ultimate (used to have xp, & it worked) will not burn cds & DVD for playback in standalone players. Will only play on the pc.

  The version of the audio driver is now 6.1.7601.17514

  The modem is Conexnt

  VGA driver nVidiaMotherboard is: NVIDIA

  ===========================================
  Windows 7 what app do you use to burn video DVDs
  and video CD?

  Have you tried to use DVD creation in Windows 7 to burn your DVD?

  Read the following article.

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
  (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

• LOOKING FOR DVD DRIVE FIRMWARE W. 7. PRO DRIVE WILL NOT BURN

  MY OPTICAL DRIVE WILL NOT BURN OR FORMAT, IT WILL READ.  IT ALSO DESTROYED RECORDS. The M/S FIXIT TOOL DOES NOT HELP. TRY TO FIND THE FIRMWARE for a (STANDARD) OPTIARC ad - 7540a PLAYER PERSPECTIVE.  I LOWERED THE WRITE SPEED, OFF THE DRIVE AND REACTIVATED, WITHOUT SUCCESS.

  AN A6020 FUJITSU NOTEBOOK, ORIG. WITH VISTA AND UPGRADED TO WINDOWS 7 PRO.

  will follow your advice and get a USB key.       Ernie g

  Definitely recommended, and they are bootable too. :)