Satellite L10-102: screen goes down and then comes very quickly.
Hi, I have Nooteboom L10-102. Sometimes during work, the screen down abruptly then comes very quickly. Like the natural eye blinking. ? s there a kind of great power problem or comes from the different fault.
I need advice to fix the problem.
Thank you...
Hi, manual
Believe me, according to your explanation, that it is not easy to say exactly what is happening. In my opinion, just an intensive audit can train with a few explanations.
Is that your permanent unit connect to the AC adapter when this happens?
Is the monitor off feature enabled in the power manager?
On this path, it is not easy to tell what's happening.
Tags: Toshiba
Similar Questions
-
Whenever I try to play True Crime New york city for windows XP it is closes its doors after the theatrics start and gives me an error saying the file d3d9.dll has stopped working or the screen goes black and then then I know you left the game back and I'm at my desk again.
Hello Respect137, welcome.
It would appear that running DirectX files installed on your system were corrupt. This gives a test:2 follow the instructions which is there to install the package to update DirectX3. Once installed, restart your computer and try to run the gameLet us know if this helps,Thank you!Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I downloaded ie9, it does not open. a window opens as it tries and then stops (very quickly) no error messages appear.
I tried to reinstall, ran a scan for problems, the saved settings. I can still access to safari or chrome.I noticed that some other features in windows now do the same thing while trying to open a new window and it does not work. I have vista 32 bit.IE9 is showing as a program and all the settings seem okmy windows will not install updates?Hi Robin,
Since you are facing problems of opening IE 9 and a few other features in Windows, you can try these steps and see if it helps
Step 1:
Check if the problem persists in safe mode with network.
Start your computer in safe mode
Step 2:
If you do not experience the problem in safe mode with networking, you can try to perform a clean boot and see if it helps.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
Hope this information is useful.
-
Problem with the screen goes black and then completely black
While watching a movie saved/tv show with Windows Media Player/VLC or any other media software, when a night scene or any situation where there is an important subject of black screen, my screen becomes progressively more dark, until it becomes completely black and then, after a brief moment begins to clear up, but is still much darker than it should be. Am I engaged a setting in my graphics card which is the cause?
Operating system system model
Windows 7 Edition Home Premium (build 7600)
Install language: English (United States)
Local system: English (United States) Compaq-Presario, NC696AA-ABA SR5710Y
System serial number: MXX91902Q1
Case type: Desktop
Processor and b main circuit
2.30 GHz AMD Athlon Dual Core
64-bit ready
Multi-core (2 total)
Not hyper-threaded Board: ECS Iris8 1.0
The bus clock: 201 MHz
BIOS: Phoenix Technologies, LTD V5.36 11/19/2008Display
NVIDIA nForce Serial ATA Controller
Standard dual channel PCI IDE controller NVIDIA GeForce 9400 GT [graphics card]
ViewSonic VT2430-M [Monitor] (24.0 "screws, s/n R4S101790118, April 2010)Does not need to update the Nvidia driver because it is up to date and could not update the Viewsonic that Windows only recognizes as "PnP monitor" generic monitor, even if it is described as Viewsonic in the Nvidia Control Panel. Did restore the default values in the video section of the Nvidia Control Panel, and that seems to have solved the problem.
Thanks a lot for your help!
Install these updates of 2 drivers and then restart the pc and try again see if the problem occurs.
Another thing that I recommend is trying to reset your settings to default monitor by pressing the MENU button and finding the option defauult of zero/factory reset.
You can also restore the default settings in the Nvidia Control Panel by clicking on restore by default in most sections.
-
Red/purple/magenta strange "shadow" that goes away and then comes back
I'm having some trouble with an odd coloring going on inside LR.
When the file is loaded, it looks like this:
Once you touch ANY cursor (or do anything really), this happens:
Notice the weird red/purple/magenta area around his mouth and cheeks.
Someone has ideas of what is and how to stop it from happening? I had some suggestions that it could be a moire caused by the texture of the veil, but it seems strange that LR he was entitled to be with.
Any suggestions are greatly appreciated.
Thank you.
Try the memory option in the adjustment brush.
-
When windows update is running on my machine (and updates), my screen goes down to 1024 x 768. I have a HD card of ATI all-in - Wonder and an Acer X203H LCD with DVI connection. If I use system restore to go back, I can get higher resolutions, but Windows does its thing and I'm back at low resolution. I can't change the settings manually as 1024 watch as the highest res available to the general public when this happens. There must be some weird conflicts. I tried to update the drivers, that made no difference. Is there a setting Aero or the conflict at stake here? In the past, I've had trouble with a display of balnk and I had to go back to the 2008 version of the driver to get things to work. From there, whenever I update, I can keep high resolution, but after the last windows update (security of IE8 and much smaller pack that was released on March 28-30), it dates back to 1024 x 768 again. Control Panel and catalyst control the two show that as more high resolution available for refresh rate. Suggestions?
Change your update settings to find the problem, we > then right-click on > hide.
And don't do hardware drivers through Windows updates.
Find them in the equipment or the system direct manufacturer.
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Understanding Windows Update and Extras in Windows Vista
Download updates but let me choose whether to install them - if you select this option, Vista will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.
See Update above settings to solve this problem
See you soon.
Mick Murphy - Microsoft partner
-
original title: HELP ME PLEASE!
(I am running windows xp) I need help! I tried installin linux ubuntu for netbook 10 on my msi u100, but everything was wrong when my little brother from my FlashDrive from the port, it has been installin linux from. so now when I turn on my computer it will not load windows, it will just have the msi logo and then the screen goes black and it does not load windows xp.
Netbooks and also most computers these days, do not come with an installation CD. Instead, it has a recovery partition. Assuming that you have not deleted the recovery partition,
Take a look at this:
http://randompastime.blogspot.com/2010/02/restoring-MSI-wind-U100-NetBook-to.html
Hope this helps
Post back if necessary
__________________________________________________________
If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
original title: Auto Adjust
Hello.
Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.
I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.
Any help would be appreciated... Thank you
Try this:
Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.
Then:
http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution
Change the screen resolution
Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.
See you soon.
Mick Murphy - Microsoft partner
-
I get to the black screen with the Windows XP logo and the bar of the State, and instead of my forthcoming accounts page, the screen goes black and nothing else happens. I tried the power off to reset and restart, and I can't perform a recovery of the system with the CD.
Hi cgrosenick,
-What software changes you did on the computer before the show?
Follow these steps:
Method 1:
Start your computer in last known good configuration mode.
For instructions, see How to start your computer by using the last good Configuration in Windows XP functionality
Method 2:
Follow the steps in this article:
Computer stops responding with a black screen when you start Windows XP
-
Need of energy saving for Satellite L10-102
Hello
I want to ask whether it is possible to use a software energy saving with my Satellite L10-102 model?
I tried software standby of an A55-S306 power but the software checked first is the appropriate model or not and then also failed.
Where can I find the software of standby power for my laptop? If I can't find so why the other models, but L10 didn't Eve software power?Thank you...
Hello
You re right. This unit has been delivered without the Toshiba power saver. It uses Microsoft Windows power options.
I put t know why the energy saver is not designed for this device, but as far as I know it s not possible to use another energy saving that was not designed for this device.
This software cancels the installation procedure. -
have a screen saver password photos. As he passes, the screen goes black and stays black. What can I do?
have a screen saver password photos. As he passes, the screen goes black and stays black. What can I do?
===============================
I don't know what is causing this problem but would be
suspicious, it is related to a corrupted or obsolete
video driver.Might be interesting to try to reduce your graphics
Hardware acceleration instructions
in the following article.How to put in back of graphics hardware acceleration
http://www.pptfaq.com/FAQ00129_How_to_set_graphics_hardware_acceleration_back.htm
(scroll down to: "If you are using Windows 2000 or XP")If they improve the question, you should look for the
site Web of MFG. your video card
a updated driver Win XP compatible video. Or...
If your computer is a laptop... Search support
site of the manufacturer of your computer.If you do not know the make and model of your
Video adapter, see the documentation that
supplied with the computer.Also you can find info on your video by driver
go to Device Manager: you can launch
By clicking Device Manager on... Start/run and
type or copy / paste:
devmgmt.msc
And then press ENTER.Expand "Graphics cards" and right click
the name of your graphics... then
choose... Properties / tab pilot... FYI.You should find the make and model of your
adapter display as well as the version of the driver.If the driver on the Web site is no longer
current than you run...
Download and install it. In addition, installation
instructions that should be followed closely
should be available on the support site.Once installed the new video driver... you
can restore your full acceleration.Good luck...
-
Satellite L10 - 102 - battery monitor programs do not read the batteries
Hello
I downloaded toshiba L10 drivers yesterday and I set up bios driver today after that my battery was not readable by the battery monitor and other programs.
Has not changed in the Bios, but my battery is now unreadable.features
Toshiba Satellite L10-102
battery EEPROM: bq80201dbtThis means that you can not start your laptop with battery power only?
What happens when you follow:
Remove the battery
Departure for laptop with power supply only and when the operating system is fully loaded, put the battery inside. Battery is correctly recognized? -
When using gpu high performance my laptop screen goes black and white
HP Touchsmart TM2-1010ea
Windows 7 64 bit
recently updated to AVG, nothing of other news.
When I use the high-performance GPU the laptop screen going black and white, still functional. When you use two screens, the second screen is in color, while the laptop is in black and white. using the screen of the laptop power saving GPU is again in color.
Hello mcbethtings:
Welcome to Hp forum. Your question is not in the list. http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=56801&tmp_task=solveCategory&CC=UK&DLC=en&lang=en&LC=en&product=4100044 So, in this case I sujest a restore back to remove what are the mistakes caused by a bad AVG update. GoTo all programs search and type in Recovery Manager click that above and open it. Click Yes (white box) so it apears. Select Microsoft System Restore Click next to three windows now you will see a list of dates, select a date prior to the installation of the update, then click. Let the computer do its restoration. Once done see if your problem is solved, if so try the update again, make you that the update is for 64-bit Windows 7 computers before you download it again. If that happens again once you know what AVG is not compatible for your computer.
Probably you have only received part of the witch update caused this problem due to the disruption of atmospheres. Sometimes this happens. Put day of my HP only made once. I just did a restore back and downloaded the update again and the second time through work. Please click on Bravo if this solves your problem. Thank you frrw.
-
screen goes black and I hear 3 beeps slow cpu.
A few minutes after turning on the power button on the computer, my screen goes black and I hear 3 beeps slow cpu. It makes me have to hold in the power button to turn off the computer and restart. This happens as regularly after I've been on the computer for awhile. What is causing the black screen and beeps?
Hello
You normally get beeps and it does not start.
You will need to go to your computer manufacturer's website and find out what BIOS you have in your computer model.
Then check in these links 'beep' error codes know what hardware has problems.
http://www.pchell.com/hardware/beepcodes.shtml
http://www.computerhope.com/beep.htm
See you soon.
-
My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer
Hello
You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
on devices and UNINSTALL - REBOOT.Another method to try to get to the desktop (try in normal Windows Mode without failure)
CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
by tapping F8 as you start several times.First check this thread in case it is simple and if not to come back to this thread.
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a
Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
That there is no information on a black screen as it is on a blue screen just adds to the
Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
Google to see the proposed repairs, whom some have worked however these cover a wide
field efforts.Here's a video of one of them.
http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1
Here's another fix
http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.phpYou have a Vista disk? You can try restoring the system to it. If you do not have your system disks
manufacturer will sell them at low prices. Or try in safe mode if you can get there.How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlYou can create a recovery disc or use someone even version (to do the system restore there only to)
being bootable).How to create a Vista recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html------------------------------------------------
These require the correct Vista discs since you can not start safe mode.
Try the Startup Repair tool-
This tells you how to access the System Recovery Options and/or with a Vista disk
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxTry recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html-----------------------------------------------
Here are a few Google searches where many have found different solutions:
Vista black screen - check that a 1st
http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10Vista black screen Solution
http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQIVista black screen Fix
http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI-----------------------------------------------
If necessary and you can access all ordinary Windows.
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.You can use another DVD that are not protected but you will need to copy you have the product key.
On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmIf nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html---------------------------------------------------------------------------
Another method that works sometimes: at the command prompt, type of Vista startup disk:
(type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
or "BOLD")c:
cd\
CD c:\Windows\System32\winevt (there is a space between cd and C :)
Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)RESTART Windows
I hope this helps.
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
Ways to restore by using this section of the support of Firefox do not do.
-
Cannot use acoustic silent software on my WXP Tecra A8
Hello I'm on a Toshiba Tecra A8 (PTA83E). I lowered the from VISTA to XP.My problem is that I can't get the DVD drive in quiet mode. I have the silent acoustic software installed, click on the ' Mode silencer Set "but this cooler keeps the DVD player
-
How can I set up the webcam on my hp 7 2801 slate
Bought yesterday 7 Slate. No proplem to what I wanted to set up Skype. Low App loaded but cannot find how to show the Webcam icon on the currency. Can someone help
-
Impossible to print via USB using my iMac running 10.6.8 Officejet 4635
I bought this printer all in one HP Officejet 4635 yesterday and are unable to print via USB. I have an iMac running OS 10.6.8. Until I'veI tried all of the suggestions that I could find on these forums (ex: downloaded the latest driver, disconnect
-
I have some problems with my computer. In the last months, I had to run Malwarebytes as there was a large number of viruses on my computer. I use AVG and Windows Security Center. Since the first major attack of virus, my Security Center tells me that