Satellite L10-205: CD Writer 2 DVD writer

Similar Questions

• Satellite L10-205: the RAM size has really questions?

  My Satellite L10-205 received just 256 MB of RAM. What I do or is it necessary to increase the size of the RAM. What is the best size to speed up the performance of my laptop. Can someone give me tips, please thank you.

  Hello

  Well, the high memory value gives you portable more performance.
  The fact is that the new software needs of more memory. As much as I know this laptop also shipped with shared memory graphics card. In your case if the graphics card uses 64 MB main memory if the software can use only 192 MB.
  In my opinion the laptop should a min 512 MB.
  You can upgrade your laptop with PC2100 DDR - RAM maximum. 1024MB.

  These modules are memory compatible:
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)

• Satellite L10 - 205 - product recovery CD does not work

  I buy a Toshiba Satellite L10 - 205 laptop from Dubai and since it was working fine.
  But now it became slow and I thought that to format using the original product recovery CD.

  When I format, it gives an error about 25% of the formatting.
  I tried to do it again and again, but the same problem persists.

  Which, in my opinion, I had the wrong product recover CD when it starts formatting he says loading Windows 98, but I have windows xp on my computer.

  Could you please give me the soultion or is it possible to get the right porduct recovery CD

  > Which, according to me, I had the wrong product recover CD when it starts formatting he says loading Windows 98, but I have windows xp on my computer.
  This is not a defect, Toshiba image that sits on the recovery disc for an old series laptop is based on Win 98 again Win XP is on the disc! So don t worry it s Win XP!

  I m not very well why you can not recover the laptop, but there are two options; HARD drive failure is so the laptop has been slower or the recovery disk is faulty (maybe a few scratches, etc.)

  In case you, it would be desirable to test the laptop with other bootable disks (MS Win XP or Linux) to check if the HARD drive is ok

• Satellite L10-205: need of product recovery CD

  DEAR R2D2

  Will you help me by sending a recovery CD product for this system of L10 - 205. I'll be very grateful to you if you are Basel for this

  Asim

  Hi mate

  I put t know why you think I would be able to send you a recovery disk?  :|
  I m not a L10 owner Sat and I don t have this spare drive
  I have a Sat A210 but it was not shipped with recovery disk.
  I created using the preinstalled software (Toshiba recovery disc creator).

  In your case, I recommend the ASP seeking assistance.
  But as already mentioned here in this thread I don't know if the L10 recovery disk is available m
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=160519

• Satellite L10 - 114 - it has a DVD burner?

  My laptop has a DVD burner on board. I know he'll make the CDs, but it will make the DVD.

  [Edited by: admin August 6 05 16:38]

  Hello

  You must have a DVD Super Multi drive, which can read and write all DVD, DVD +/-R/RW and DVD-RAM.

  Good bye

• Cannot write on my Satellite L10 Pro CD/DVD

  Hello

  Since 1 month ago, I have a Satellite L10 and I can't short any CD or DVD. When I want to write a CD or DVD to 25 or more present smudges of writing has become bad and does not.
  I do brief with a different program of NERO until CLONE in every program, I have this problem.
  I can just short low file size is low. 10 to 100 MB I can anyway other size I can't write.

  So is there a problem with hardware or software?

  Please help me?

  Hello

  Normally, you can change this limit in Nero. I had the same problem a few years ago.
  So just check the option of Nero or reinstall it.

  If you cannot find t you should look in the Nero user manual.

• Satellite Pro M30: Cannot write - DVD SD-R6112

  I have a M30 Satellite with a Player Pro combined DVD - ROM SD-R6112 DVD. The drive is marked as "DVD-R/RW. It will play the DVD without problem, but it will not recognize any blank DVD - RW disc. I've used Nero6 and RecordNow Delux.

  The drive is incorrectly marked? If anyone has had problems similar and, more important still, to find a solution?

  Hi Geoff,

  Your device works properly if you use DVD-R discs? I tried mine using a DVD - RW once and it would not accept the disk until I had formatted (using NERO).
  Using DVD - R blanks I had no problem at all.

  HTH

• Satellite L10: cd/dvd not found!

  My cd/dvd has packed all of a sudden and then now I can't read cd, write discs or load programs. The local hypermarket of the PC (no names) say I need a new CD drawer which they cannot provide you with... So, does anyone know how to buy one or even what might be the part number? the model is a Satellite L10. Oh yes and as the laptop never moves from his spot on my desk, someone has any ideas as to what may cause it to stop working... ?

  Where else, EBay, of course. Here is the link

• Satellite L10: Mat * a DVD - RAM UJ - 831 S - update the driver or firmware

  Hello
  I bought a Toshiba Satellite L10-194 with a carpet * a DVD - RAM UJ-831 S and I'd like to update. My driver version is 5.1.2535.0 Microsoft (07/01/2001). I have a game I want to install it on my laptop but the CD doesn't recognize is not my DVD-RAM and its freezing point. I also want to know the rate of transfer of this DVD-RAM.
  Thank you

  Hello Daoude

  In my opinion, you have a bad driver. You can find the most recent version of the driver from the official website of Toshiba. The version of the driver for windows xp is 3.1.0.0 (last updated 02/03/05).

  Good bye

• DVD double layer on Toshiba Satellite L10?

  Hello
  Recently, I bought a Toshiba Satellite L10. How will I know if the DVD recorder has got the new system of double layer? It is not either written in the manual user, nor on the drive of DVD/ROM. there, he said: DVD + ReWritable, whereas it is said on the DVD, I bought: DVD + R DL. So if there is no 'DL' written on my drive doesn't mean it's doesn't DVD double layer?
  I hope you can help,

  Sunflower

  Hello

  I put t know what L10 you have exactly, but AFAIK series L10 has mounted fixed DVD-Super Multi (double layer) drive.

  Good bye

• Satellite L10 DVD Super Multi Drive - E/s of entry Error Message

  Does anyone know why, when I try to play a CD or CD-ROM, I get a box saying i/o error of entry?
  I have a Satellite L10 with a DVD super multi drive. It can read DVDs and DVD ROM

  I thought maybe it was a cable connected the drive itself, but if it's that I need how out of the car and how to support.

  I tried updating the driver and uninstall it then reinstall the drive, but I still have the same problem.
  Cannot use the accompanying software as is all the cd.

  Please can someone help me.
  Thank you

  Hello

  In most cases the entrance of e/s, error message is related to a hardware malfunction (CD/DVD drive).
  The readers of the lens laser can not calibrate properly and therefore it can not read the CD inserted.
  These errors are not uncommon and occur mostly after a long period of use due to a material stressed.

  But let's check the last possibility of solution;
  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then, restart the computer and check if it of possible to read CDs.

• Satellite L10 - no DVD/MPEG/DivX playback

  I can't play a DVD or file MPEG/DivX on the Satellite L10 of my aunt. Further when you start some games, I get error messages like that Direct3D has failed. When you try to playback MPEG/DivX with WinAmp only sound can be heard but not video.

  Trying to read DVD with for example PowerDVD I got an error message (something like "mode not supported to display, please change the resolution, depth of color or frequency).
  Strangely playing DVD worked perfectly because I configured the L10 before shipping to my aunt. She has very bad computer knowledge and therefore no new drivers or anything else have been installed.

  I checked the resolution and try other resolutions and color depths, but it did not help. There must be a problem with Direct3D but I have not found where check/change the Direct3D settings. I would setup unintentionally new graphics drivers, because I know that the 'old' has worked well and the L10 is about 1500 km and I do everything with the remote control software - if something happens, we have a great difficulty.

  Someone know this problem or has any advice?
  Thanks in advance for any answer!

  Hello

  Well, Microsoft DirectX is a set of technologies designed to make computers based on Windows a perfect platform for running and displaying applications rich in multimedia elements, such as color graphics, video, 3D animation and sound surround.

  You can try to check which version of DirectX is installed on your device and check if the latest version is available. I think the latest version is 9.0 c

  To start the program, please type in the dxdiag command window
  Hope this helps.

  Good bye

• Carpet * a/Panasonic UJ-830 s satellite L10

  Hello

  I was put in with the carpet * a reader of DVD-RAM UJ-830 s mounted on my Satellite L10 for a few years, because I have used in a extent the laptop somewhere and have had my external USB DVD - RAM drive still available. However; now I am in the situation where I'm moving around more and am not always able to have my external hard drive with me and make me more frustrated by the performance of the carpet * player.

  I use what is widely regarded as the best available DVD + R media, namely Verbatim 16 x Taiyo Yuden dye, and the UJ-830 s offers only write a 2.4 x. application of Toshiba technical support asking, nea pleading for an update of firmware are met with the response "will be there, but we cannot say when.

  When asked if there was an upgrade of the hardware available, told me that "this is not recommended because of possible compatibility issues".

  Surely Toshiba must have the necessary information, either:
  (a) output a status update for the UJ-830 s firmware so that it recognizes new media correctly
  (b) provide a compatible hardware upgrade

  Anyone with ideas on how to sort this point, or which may suggest some media 8 x good quality that works well with this player, please post. I would also like to hear from someone who has put a new DVD writer (i.e. not original) in a laptop and has successfully obtained work as I am tempted just to try and see.

  Thank you

  Midders

  P.S. I found a list here http://atg.wfu.edu/technotes/dvdmedia/ but can't find compatible 8 x media to buy it!

  Post edited by: ADMIN

  What to say all 100% compatible CD and DVD media are mentioned in the user manual.
  To my knowledge these media work and are 100% compatible with the laptops drive

  But note; the operating manual only provides a list of manufacturers of CD/DVD and NOT CD DVD sellers.

  Please check this thread and posting created by Jeffrey:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=99980&

  However, the manual provides a list of the CD/DVD compatible readers that can be used with the Satellite L10 laptop.
  Should check the page 5 of the operating manual!

  Best regards

• A few questions about satellite L10-186 and L10-102

  Some stores in my city model offers a L10-186. The technical parameters are described the same L10 - 102 (only the amount of RAM is different).
  I can't find detailed information because the L10-186 model does NOT exist on Toshiba pages (!)

  Nobody knows:
  1. what exactly are the differences between L10-186 and L10 - 102?
  2. If I buy an extra battery - universal battery fits all laptop L10 for example can I use it with L10-101 too?

  Alternatively, if Toshiba has a support email address in order to write and ask? I can't find contact e-mail with Toshiba experts anywhere.

  Thanks for your help in advance,
  Peter Thaler

  Hi Piotr

  I guess satellite L10-186 is your specific country and you can't find it on the site of Toshiba Europe. If you find any information on the Toshiba site please try to find a dealer in your country that sells this laptop. I checked on Google Ant lots from the southeast of Europe.

  The only difference I have found is the RAM. L10 - 102 has only 256 MB of RAM and 512 MB of RAM L10 - 186.
  As far as I know that the battery needs to adapt to the L10 series.

  Good luck!

• Satellite X 205-S9800 - update Bios failure of process

  Hello guys, I have a very big problem

  I have or at least I got a TOSHIBA Satellite X 205 - S9800 laptop with 4 GB 667 ddr2 sdram installed, fsb and I downloaded the new v2.5 update of the bios from the Web from Toshiba website.

  I started the process of update in windows vista using the phoenix Toshiba bios update utility and while the utility has reached line 2 of 18, there was a vista blue screen of course followed by a system crash. I should mention that I had problems with before blue screens because of the ram I think.

  In any case, I had no choice but to disconnect the power cord and remove the battery, because the power wouldn't button? t is longer, and now when I try to turn on my laptop, it powers just up to the graphics card and cpu coolers and power led light.
  Of course, the screen remains black, the second I take my finger on the power button it turns off. When I plug in the power cord, it does the same thing, but without pressing me the power button.

  I wonder what should I do, because obviously the bios has failed, and now I have to reschedule, my question is, where he is on the motherboard, or if someone knows the part number. I have some skills in electronics.
  I can replace it, because I have find a new somewhere, or is it possible to remove the chip, connect it to an Eprom special peripheral reprogramming and actually write the image of the bios again. Or is there any life in the chip?

  I mean it would help if I find a USB floppy and try to reprogram this way.
  For any help or suggestion would be gladly appreciated, because obviously this is a terrible situation, and I made a terrible mistake, which can actually be deadly.

  Thank you in advance, I hope I have this issue

  OK guys, I found the eeprom part number (CSI) W (I) 16-16 k CMOS EEPROM 24 c series with 128 pages with 16 bytes each, ca? s 2048 KB, packed in a box of 8-Lead SOIC, so I should be able to remove the motherboard, attach it to a serial interface and reprogram (still doing some research on it).

  By all means if you have any suggestions, they are gladly appreciated.