Satellite L10 - 333 poster machine trouble error

Similar Questions

• Satellite L10-333 PSL10E - USB dongle problem

  HI members, I have a Toshiba satellite L10-333 MODEL No. PSL 10F now I bought a 02 usb wireless dongle.
  now my problem is that whenever I have start my laptop and connect to 02 to get online, the dongle starts to make a loud noise, which is constant and pushes me insane.and it breaks to the top of the internet connection.

  now, I was on the 02 forum, told me it might be the usb port is bad, or maybe I should try re - install the usb drivers, I can not find on the web site of Toshiba, seem to be an error with the results.

  I don't want to spend any more money for this laptop, as it s old for a few years and I have already replaced the screen
  at a cost of £150. can someone help me please.

  I don't have any other Internet, only the dongle... Thank you Paul.

  Jin

  > maybe I should try re - install the usb drivers, I can't find it on the web site of Toshiba, seem to be an error with the results.

  Download chipset utility of [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] and install it

• Satellite L10-333 without BACKLIGHT on screen

  My Toshiba L10-333 when turned on lights and display also, only that there is no lighting, so I don't see anything on the screen without the help of an outside light.

  If there is someone who can help with this problem please please help. I think that it has to do with, the power of the LCD. If the main power circuit problem, can it be bypassed? Even if it means losing control over the brightness of the screen?

  Any ideas would be welcome. Also, if anyone has the circuit of Satellite L10-333, please report it. Thank you.

  In such a case, you should send your machine to an authorized repair partner since it clearly sounds like a hardware failure. If I were you I would not try to repair it by oenophile because when not with something you might destroy your whole machine.

  If you need assistance to find an ASP simply go to the Toshiba Mainpage (http://eu.computers.toshiba-europe.com/) go to Support downloads & -> support homepage-> find an authorized Service partner

  Welcome them

• Satellite L10-333: screen stays black, until I hit the edge of the screen

  I have a Satellite L10-333, which is about 3 years old, it has suddenly started having screen problems.
  It started with a white screen instead of the normal and a black line all downstairs in the middle.

  Now when I turn on the pc, the screen remains black and dead until I hit the edge of the screen and when the screen comes alive, I must hold and press part of the cover, so that the display stays on...

  Anyone know what's the problem?
  I thought it might be a loose wire or connection.
  Someone else has or had this problem?

  Thanks for your help...

  I agree with you. It must be a contact problem. In my opinion, it is not important if anyone else has this problem too and you have to find the solution as soon as possible.
  The laptop must be disassembled and check the connection of the screen. Now the question is what to do. Can you check it alone or you need professional help?

• Recovery procedure starts with error message - Satellite L10-333

  Two problems really

  One of my CD / DVD player plays up.

  I can't record dvd had / CD on this subject.

  However, I can watch DVD / CD on this subject.

  I tried different brands on CD but does not resolve it.

  So I decided to restore my computer to default to see if that fixes however I get the message

  "RECOVERY".
  MACHINE TROUBLE!
  THIS SOFTWARE IS DESIGNED FOR TOSHIBA PERSONAL COMPUTERS. "

  and it wont let me restore default settings

  Any help much appreciated

  Andrew

  And you use recovery media delivered? Is - the first time you try to use it?

• Satellite L10-333 starts

  I have a Toshiba L10-333
  and without reason, he decided that he no longer wants to start.

  Basically, you can activate... He will come to the top of the toshiba screen (where you can press f12 etc) then it goes straight to the screen that says that he has not been previously arrested properly. So you must select from the following text starts windows normally starts in safe mode, start in safe mode with promt, starts in safe mode with network. BUT... When you choose one of these options, it does nothing. goes to a black screen and the rest of the way until you get angry and turn off.
  Oh and when start in one of the safe mode option it a list of things real and then stop at one of the lines.

  Please help :D

  PS I tried the recovery disk, it goes to all the steps but when it will restart... same thing happens.

  I m wondering on which recovery disk didn't solve the problem. Normally, this seems to be a Windows problem

  I can't tell what the problem, but in your case, I would check the disk with Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. You can then the HARD drive.
  On the same site is a user's guide if you want to know more.

• Qosmio G15-AV501 - cannot recover - MACHINE TROUBLE error

  Hi, im using laptop Qosmio G15-AV501. I decided to do a recovery with discs included.

  Here are my steps:

  1. width launched 1 2 recovery disk. Reported recovery software 'BAD MACHINE'
  2. has tried to launch the tool update DMI, witch, I downloaded from the toshiba web site (my G15-AV501 model was included in the list of supported models!)
  3. DMI updates tool reported that "error - no id of corresponding platform was found."
  4. I started the process of recovery manually with the commands:
  Q:
  Basic CD
  OS.bat

  Recovery (Ghost) has launched and completed without error. But after Windows XP Recovery displays BSOD without name or error code.

  What can be?

  Without error here, no one can say with certainty what the problem is here.
  If possible, get the facilities for Windows XP Home edition CD and try installing the OS.

  It will be interesting to know if the BSOD will appear again.

• 'Bad Machine' error when I start the recovery on Satellite L10 media

  Hello...

  I have a Toshiba Satellite L10-103 and I want to make the recovery, since I have constant errors and my wireless does not work.

  When I put on CD, everything is ok, I press F12 and get the choice when I want to access computer. I select the CD/DVD drive. That produces the recovery starts and I get this error message:

  "Wrong Machine! This software is designed for personal computers TOSHIBA '

  What's wrong with it?

  Hello

  Are you sure that the recovery CD you are using is designed for Satellite L10 - 103 to 110%?
  Please check this!

  But if you use the same recovery CD that came with the laptop, and you still get the same error message, then the false DMI information that is stored on the motherboard might be responsible for this error message and might prevent to recover.

  This can occur if the motherboard has been replaced and that the technician has not updated the DMI string.

• Satellite L10 - Hotkey.exe error after booting Windows 2000

  I've installed Windows 2000 on my Satellite L10 rather
  XP. After installing the utility Hotkey-I get an Error Message at every boot:

  Hotkey.exe - Entry Point not found
  The procedure entry point WTSUnRegisterSessionNotification could not be loaded into the WTSAPI32.dll dynamic link library.

  Same error Message When you try to manually start the Hotkey.exe.

  How can I solve this problem? The system works, but the
  Keys not.
  Thank you in advance for help!

  P.S.: As I read on the web, this error has nothing to do with the missing operating system XP - maybe the HotKey software does not work with Windows 2000. Where can I get a Hotkey software work for Windows 2000 for Satellite L10?
  I try to find it on the download from Toshiba site, but there is that some drivers for the L10 on Toshiba.com and the European server are only readers for XP :(

  Hi turmeric

  All the drivers, tools, and utilities are designed separately for each operating system. This means that you can not use tools designed for Windows XP Home edition with other operating system. You don't find utilities and tools because your device is not supported for the Windows 2000 operating system.
  I'm sorry.

• Satellite L10-270 - error Power Saver, utility

  Hello.

  I have a Toshiba Satellite L10-270 and because no standby power utility has been installed on.

  Then I looked for the Toshiba Power Saver, utility and try to install it, but I was unable to make it work. The battery is very low, I really need this software to work.

  Sometimes I get a message:

  "A fatal error has occurred. The program will end.
  "Code: Ox7E.

  And sometimes the message:

  «Cannot be opened because you do not have access rights to use «Toshiba power saver»»

  I hope you can help me, all brands have a power management utility work, I was hoping that it was the same for Toshiba. I hope!

  Any solution, a way to run the Toshiba Power Saver or any other software that could replace it.

  I have another question, where can I find the phone numbers and e-mail technical support or service after sale?

  Thank you.

  Hello

  The energy saving was not preinstalled on this unit because this utility is not supported on this device (Satellite L10-270).
  It would be very interesting to know where you found this tool?
  I put t I think that this energy saving will not work properly because it was designed for another unit. In this case, you must use the Power Options of Microsoft Windows that you can find in the Panel

  In addition if you want to contact technical support please visit this site. You will find detailed information.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/csg_national_entry_page.jsp?service=EU&from=http%3 A / / www.toshiba-europe.com/

  Good bye

• Satellite L10 DVD Super Multi Drive - E/s of entry Error Message

  Does anyone know why, when I try to play a CD or CD-ROM, I get a box saying i/o error of entry?
  I have a Satellite L10 with a DVD super multi drive. It can read DVDs and DVD ROM

  I thought maybe it was a cable connected the drive itself, but if it's that I need how out of the car and how to support.

  I tried updating the driver and uninstall it then reinstall the drive, but I still have the same problem.
  Cannot use the accompanying software as is all the cd.

  Please can someone help me.
  Thank you

  Hello

  In most cases the entrance of e/s, error message is related to a hardware malfunction (CD/DVD drive).
  The readers of the lens laser can not calibrate properly and therefore it can not read the CD inserted.
  These errors are not uncommon and occur mostly after a long period of use due to a material stressed.

  But let's check the last possibility of solution;
  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then, restart the computer and check if it of possible to read CDs.

• Satellite L10-190 - Display driver for Windows 7

  Hello

  read the message below * I * wonder about this anwer * support Toshiba! Why * not * install Win 7 on a 'former '? I did the same and it works very well. But I had the same problem as Assim. And everyone knows that Intel didn't intend to allocate a Win 7 driver for this chip (INTEL 82852/82855 GM/GME Graphics). In my opinion, this is not correct behavior.

  I think TOSHIBA or INTEL should allocate such a driver for their clients. It would be a minimum of support. Maybe you think...

  Best regards
  FES

  Re: Satellite L10-209 - how to install the display driver for Windows 7?
  Posted the: March 17, 2010 09:02 am in response to: Assim in response to: Assim
  Fix

  Hello

  I m wondering that you have installed Windows 7 on this good old classic. In my opinion Windows XP would be the best choice, but ok, you can do what you want ;)

  Anyway, AFAIK your laptop is equipped with an Intel graphics card then I recommend to download the driver form Intel directly because the Web from Toshiba site displays only the Windows XP display drivers.
  http://www.Intel.com

  Check this box!

  Hey Buddy,

  Why is this Toshiba support response? I have never seen anyone from Toshiba here so it s called user in forum.

  I put t know where found this answer, but I agree with it. In my opinion Windows XP seems to be the best choice in old enough Satellite L10.

  In any case, if Intel doesn't provide new drivers Windows 7 for this chipset, it s not a Toshiba error. You can only try the Vista driver because most Vista drivers work on Windows 7.

• Satellite L10 - B - Toshiba Service Station does not

  I have a Toshiba Satellite L10 - B with Windows 8.1, that I bought for my wife. Expiry of the additional phone support, and I need help.

  Since I bought the computer, I am wondering how to check updates from Toshiba. I finally found out there is a program called Toshiba Service Station that is supposed to automatically check for updates, but I've not yet seen this program, or notifications of him.

  I went looking for using the search function, and now I know where to find.

  Just today, I tried to manually check the updates of Toshiba using Toshiba Service Station, but it is coming up with an error message indicating that the program has not been initialized and I need to restart or reinstall the program. I tried to reinstall the program from the Web site, and I still get the same error message.

  Where to go from here?

  I currently have a different problem but with my Toshiba service station on my Toshiba laptop Satellite P70 - A laptop computer 8.1.

  I got when Windows 10 free update became available. Had improved to 10 Windows. I had some problems with my Toshiba since the upgrade. But I'll fix it in another thread.

  The problem I have is the Toshiba Service Station as well. I received an alert notification in the Notification Center of Toshiba Service Station. That there was some new updates to download and install. I opened the Toshiba Service Station. A click on the download button. Wait for the download progress bar of progress overall. But he did not download the download progress bar was not even download an update of size small file for one of the Intel drivers. I'm like waiting and waiting for the progress bar fill. But only see an inch of the bar filled. The update has more than 300 MB to download. My internet speed is fast. So I don't know what's taking so long to download.

  Please tell me what I need to do?

• Satellite L10-226, what memory inside?

  Hello

  I am interested in buying a portable satellite L10-226, but it has only 256 MB of DDR Ram. For this reason I will update the Ram 512 MB DDR - Ram after buying. What memory does Toshiba use for this model (Timings/speed/producer)?
  If I get a 512 MB DDR - Ram inside and sell the original 256 MB Modul, is there any warranty issue, if the laptop has a defect or I am authorized to change memory by myself?

  Thanks for your help,

  Kind regards

  BoLzI

  Hello

  I can't find any specific details for the L10-226, but I found some information for the L10-224, which has two available RAM slots and uses 1 x 256 MB module or module 1 X 512 MB, leaving 1 spare slot.

  If you L10 - 226 has this configuration so your cheapest upgrade would be to add a second 256 MB module to the second slot giving you a total of 512 MB. The module for this is 200-pin PC2700 (333 Mhz) DDR SODIMMreference number PA3311U-1 M 25

  The module of 512 MB is PA3312U-1 M 51part number.

  The mnodules of RAM are components replaceable by the user so changing them will not affect your warranty at all. However, if your computer is then sevelops a fault with the modules of RAM, then you would not be able to get them has changed under warranty Toshiba, you must return yourself to the vendor from whom you got their.

  HTH

• Satellite L10-192: Video Out (TV screen is black and white)

  Hello

  I recently bought a new notebook Satellite L10-192, and I have trouble with the video out of service.

  The image on the TV screen is black and white. I have read and followed the instructions of the manual (indicate the video mode PAL B, etc.), but it is always black and white.

  I have Win XP Pro without Service Pack.

  Anyone has any advice on this problem? Can I change the resolution or color depth or install Service Packs? Or a Toshiba from the factory CD utility?

  Thanks in advance,

  Zoltan

  Hello

  In my opinion, your settings on the laptop are right but please check your TV also. I put t know if your TV is a S-video port or you use a S-video adapter. Please check menu TV. Maybe it's for S-video option in the port.

  If the TV doesn't have a S-video port, you can connect your unit as follows:
  (1) SVID-adapter that brings back the color! It works with any device with an s-video signal through a plug 4-pin or 7-pin. http://www.s-vid.de/images/SVID.gif
  (2) SCART - / adapter S-video http://www.mediaatlantic.com/product.php/366/1142//8aa0b1bbaf6020c785221873b2a985bd

  Good bye