Satellite L10-333 PSL10E - USB dongle problem

Similar Questions

• Satellite L10-333 without BACKLIGHT on screen

  My Toshiba L10-333 when turned on lights and display also, only that there is no lighting, so I don't see anything on the screen without the help of an outside light.

  If there is someone who can help with this problem please please help. I think that it has to do with, the power of the LCD. If the main power circuit problem, can it be bypassed? Even if it means losing control over the brightness of the screen?

  Any ideas would be welcome. Also, if anyone has the circuit of Satellite L10-333, please report it. Thank you.

  In such a case, you should send your machine to an authorized repair partner since it clearly sounds like a hardware failure. If I were you I would not try to repair it by oenophile because when not with something you might destroy your whole machine.

  If you need assistance to find an ASP simply go to the Toshiba Mainpage (http://eu.computers.toshiba-europe.com/) go to Support downloads & -> support homepage-> find an authorized Service partner

  Welcome them

• Satellite L10-333: screen stays black, until I hit the edge of the screen

  I have a Satellite L10-333, which is about 3 years old, it has suddenly started having screen problems.
  It started with a white screen instead of the normal and a black line all downstairs in the middle.

  Now when I turn on the pc, the screen remains black and dead until I hit the edge of the screen and when the screen comes alive, I must hold and press part of the cover, so that the display stays on...

  Anyone know what's the problem?
  I thought it might be a loose wire or connection.
  Someone else has or had this problem?

  Thanks for your help...

  I agree with you. It must be a contact problem. In my opinion, it is not important if anyone else has this problem too and you have to find the solution as soon as possible.
  The laptop must be disassembled and check the connection of the screen. Now the question is what to do. Can you check it alone or you need professional help?

• Is there an internal WLan antenna in Satellite L10-119 PSL10E

  I have a Toshiba Satellite L10 - 119 older (model No. PSL10E-00L01MED).
  I would add a mPCI-wireless card for which there is an empty slot.

  However, there don't seem to be available antenna wires.
  Is it possible these threads have slipped under the casing in which case I'll have to take the computer apart to find, or this computer did not come with built in antennas, although there amPCI slot?

  Thanks in advance.

  Hello

  > Is it possible these threads have slipped under the casing in which case I'll have to take the computer apart to find, or this computer did not come with built in antennas, although there amPCI slot?

  If there is a Wlan antenna you would see then two sons near the minPCI Wlan slot. Usually the two wires are black and white.
  If you didn t find these threads then there is no WLan antenna inside the laptop.

  Welcome them

• Satellite L10-333 starts

  I have a Toshiba L10-333
  and without reason, he decided that he no longer wants to start.

  Basically, you can activate... He will come to the top of the toshiba screen (where you can press f12 etc) then it goes straight to the screen that says that he has not been previously arrested properly. So you must select from the following text starts windows normally starts in safe mode, start in safe mode with promt, starts in safe mode with network. BUT... When you choose one of these options, it does nothing. goes to a black screen and the rest of the way until you get angry and turn off.
  Oh and when start in one of the safe mode option it a list of things real and then stop at one of the lines.

  Please help :D

  PS I tried the recovery disk, it goes to all the steps but when it will restart... same thing happens.

  I m wondering on which recovery disk didn't solve the problem. Normally, this seems to be a Windows problem

  I can't tell what the problem, but in your case, I would check the disk with Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. You can then the HARD drive.
  On the same site is a user's guide if you want to know more.

• Satellite P10 and Netgear USB dongle use

  Hello

  NETGEAR insist it is a Toshiba system problem...

  Whenever I try to inslall wg111v2 cherif I get... Failed to install... "RegDBCreateKeyEx failed", and/or... "cannot read the control on the Netgear server file.

  I don't have this problem with my other non-Toshiba Office.

  HM, looks like some related software question, but it s easy for netgear say you it s a problem with toshiba. It is like moving around customers as on a chessboard. :(

  But okay, now you´re here and we all will try to help you. You say you don t get the problem on your machines 'NON-TOSHIBA.

  So, I would say that you should first try to recover your machine with the recovery media, and then try to install the USB dongle. If it really works then it was just a problem of software and it s resolved but if not then come back and we'll see the next today.

  Good bye

• Satellite C660D - 10 p - USB connect problem Windows 7 64 bit

  Hello!

  USB drive is no longer recognized shortly after the start.

  According to 'Unsubscribe' or 'Edit user' still OK, but even for a short period.

  Have no USB Updat to Toshiba, a controller failure will probably be.

  Can anyone help?

  Harald greetings

  Hi Harald

  Can you please tell us what model of laptop do you have?
  Are you using the original version of OS that you got with your laptop?

  Maybe I didn't understand the description of your problem, but I imagine that the USB ports do not work on your laptop satellite? Right? have you tested with different USB devices?
  When you open Device Manager you will see some unknown devices here or some hardware issues?

• On Satellite Pro A300-13Y USB port problem

  I have a Satellite Pro A300-13Y with 4 USB ports. The USB ports of two right don t work. I bought this phone recently (2-3 weeks ago). It has a Windows Vista Business SP1 on it. I put chip in utility installed on it, I checked the Device Manager and tried to find driver for it but I couldn't solve this problem.

  So I called Toshiba service dek, they say that I need to install new standard to factory install to see if it can be solved. But I don t find it the best way and I have some applications installed on it and get some info on my laptop, so I would find another way to solve this problem.

  Also, I think it might be a hardware problem. Can someone show the way in which I can find or fix this? I can also send it to guarantee, but I made a mistake and if there is not a hardware problem that I have to pay for it.

  Hello

  I know it s not the best way, but it's the only way to exclude a hardware failure. If after a recovery of the won´t of USB ports not work then you can send it to repair without being in doubt that they will charge you for the repair.

  Welcome them

• Satellite L10-117 and memory upgrade problem.

  I installed the module of ram kingston 512 MB dedicated for my laptop and my system does not start. Laptop does not see its partition with windows. I tried to salvage the dvd system and he does ' t help. Recovery is going ok but after restart problem is the same. I also tried to install this memory module 256 MB (factory installed), and then my black LCD screen and the computer won't shut down. Akku only delete help to extinguish.
  I tried all combinations of this module in the memory 1 and 2 location.
  I use 1.8 BIOS and there I see almost empty memory.

  Hello

  If you start the unit with the original just module becomes so everything ok?

• Recovery procedure starts with error message - Satellite L10-333

  Two problems really

  One of my CD / DVD player plays up.

  I can't record dvd had / CD on this subject.

  However, I can watch DVD / CD on this subject.

  I tried different brands on CD but does not resolve it.

  So I decided to restore my computer to default to see if that fixes however I get the message

  "RECOVERY".
  MACHINE TROUBLE!
  THIS SOFTWARE IS DESIGNED FOR TOSHIBA PERSONAL COMPUTERS. "

  and it wont let me restore default settings

  Any help much appreciated

  Andrew

  And you use recovery media delivered? Is - the first time you try to use it?

• Satellite L10 - 333 poster machine trouble error

  Can anyone help with this you problem?

  I tried to use the standard drive re format the computer, but having this error problem 'bad Machine '.
  I tried searching and tried the "2) CD-ROM BOOT METHOD of INSTALLATION.

  When I ran the CD after restarting Windows just started normal is it true?

  My motherboard has been changed in the past, so this may be the question!
  Any help would be appreciated!

  You try to use the original disc Toshiba recovery facilities that you have with your laptop?

  If the motherboard is changed this may be the reason for this message.
  After the motherboard replacement service must write good DMI information and if they didn t does this you can face with this error.

  Please contact new service and explain the situation. they will help you.

• Impossible to activate the card wireless network on Satellite L10-202

  Hello

  I have a portable Satellite L10 that comes without WLAN.
  I bought and installed an Intel pro wireless 2200BG card on the MiniPCi slot. I have also installed and connected the mini-antennes.

  The device is activated but does not connect. I installed ConfigFree and the result was: "status of Communication Wireless: OFF." Switch where the arrow is pointing. "My laptop does not have this button, a plastic cap is here.

  Also, the combination FN + F8 does nothing.
  How can I solve this problem?
  How can I put it ON without having this button?

  Thank you.

  Hello, Lucy

  I tried to find the hardware configuration of your Satellite L10 202 (PSL10E) and now I'm complete confused now. I didn t find any information that this model of phone is upgradable WIFI and I do not understand that antenna WLAN is here.

  Anyway, is recognized WLAN antenna correctly in Device Manager?

• Satellite L10-119: OKI 8w Lite printer connection problem

  I have the Toshiba Satellite L10-119 series. I use it with 8W OKI printer. The printer works on USB port. Every day, when I print a ~ 10 pages of the judgment of the printer and XP driver display statement "connection problem". Currently, OKI prints all pages. Only restart helps XP on.

  The operating system is Windows XP and printer has an OKI dedicated for XP drivers. Other USB devices are working properly. I reinstall the Intel chipset drivers, I checked the printer on the other ports.

  Please send a sollution mail: michaljaniszek (at) walla (dot) com

  Hello

  You suggested that all other USB devices work properly on this unit.
  In this case, I guess that it s not a Satellite L10 problem but the OKI printer problem.
  Unfortunately, Toshiba is not responsible for the 3rd party hardware or software.

  However, I studied a bit on the net and found a few questions about the OKI printer problems. There are different issues and all have suggested contacting the OKI support. Well, in my opinion you should also ask the support. There may be more recent driver. Check it out.

  Good luck

• Satellite Pro L10 - low speed USB

  I just bought a new Pro L10 of Satellite and cannot upgrade USB 1.1 to 2.0 driver (which, incidentally, must be already installed).

  () I tried all updates for Windows XP.
  BIOS version is V2.0 1549 MHz
  ° USB Controller-device is not configured correctly.
  WARNING Code1-yellow

  Every time when the installation is completed to 55% the warning appears informing "usbehci.sys" file is necessary. Anyone know what to do? I can't find this file anywhere.

  Hello

  As far as I know that 1 Code means that the USB driver is not installed or not enabled. In addition, USB 2.0 is already enabled on this device. You don't need to do any upgrade. In my opinion, you should check the settings of the BIOS USB. In addition, you should try to remove the device from Device Manager.
  After that restart of the operating system should recognize the USB interface.
  Here you can find the missing file:
  http://www.USB-drivers.com/drivers/123/123003.htm

  Please check additional it from Microsoft website or info:
  http://support.Microsoft.com/?kbid=822603

  Good luck

  Best regards

• Satellite L10 - problems with my Wi - Fi button

  Hi guys.

  I'm new to this forum so please be gentle with me. My Satellite L10 cut last week and I have problems getting the wireless on again.
  I was on the button since but without success. Everyone knows that before and someone has suggestions or consider a repair shop?

  Thank you

  mickeydee03

  The Wifi light is lit on the front?

  Try to reinstall the wireless drivers. Also, make sure that the Wifi device is enabled in the Device Manager.