Satellite L10 - Hotkey.exe error after booting Windows 2000

Similar Questions

• Explorer.EXE error after the restoration of the ERD Commander

  Dell Inspiron B130

  Windows XP Service Pack 2

  Recently performed a HD format and new installation of XP SP2. After I installed all the drivers and others, I checked that the system was operating normally. After a few days of use, Windows Update downloaded Service Pack 3 and asked me to install. I started to install SP3, but at about 50%, the laptop battery is dead at Midway through the installation. I plugged the laptop on the power source and power. I restarted the laptop and XP started only a completely black screen and the white slider. No ALT + CTRL + DEL, desktop icons, etc.

  I rebooted the laptop of ERD Commander, ran the restore system and selected the first available Restore Point. Point of restoration chosen was recorded a few days before, and was the first recorded point after the clean installed XP. I rebooted the XP system. Wallpaper loaded with white cursor, but NO start menu or desktop icon. A message appears saying "Explorer.EXE Application error, press OK to exit the application" or something very similar. Did not write the error code, but can get if necessary. If I press the OK button (which is my only option), there is still no icons on the desktop or the start menu. Only the cursor. No access ALT + CTRL + DELETE or something like that.

  Thinking about completely wipe the system and reinstalls the operating system. Any suggestions before I jump in this solution?

  Explorer.EXE error after the Restore Point of ERD Commander. Dell Inspiron B130. Recently clean installed XP SP2 on laptop. Installation of SP3, to 50%, battery dies the laptop right in the middle of the installation of the SP3 update. Restarted, XP starts with black screen with cursor only. ERD restart order and restore XP to the last known good config (I choose point immediately after XP clean install). Reboot to XP. Now the wallpaper shows as well as the error message saying "Explorer.exe Application error, click OK to exit Explorer" dialog and then I can't access anything. Any ideas?

  Hello

  What is the full and exact error message?

  Step 1: Check if you are able to boot into safe mode without any problem. If you are able to boot into safe mode without any problems then try to perform the clean boot to safe mode. Also disconnect any external devices connected to the computer.

  Reference:
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Step 2: If you are still having the same problem, then you can the steps at the bottom of the article.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• I get 80244o1c error after updated windows update

  I recently used the reformat windows 8 setting, "all remove and reinstall windows.

  I have had no problems or issues with the process until I've decided to use windows update to install the necessary updates.

  Update Windows prompted me to upgrade to the latest version. I then downloaded and installed the update and it told me that windows update will automatically close and open again. After the update I went and go to check updates. I filled the boxes updates, I want to install the first. I have install updated partially because I don't have the best internet speed to download all updates at once. But after installing the updates I get only error 8024401c. I tried to use the Troubleshoot utility and restart the computer when you are finished, but I still get the error. I tried all of the solutions in this link http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_update/windows-update-error-code-8024401c/f8b9dc5f-a512-4e74-b41c-d357ca40f9f7. But still nothing.

  Help, please.

  P.S

  I also tried to reset (delete everything and reinstall windows) several times and the recovery of a option restore point until I started the update from windows update. But still no luck.

  Hi Justin,

  Thanks for posting your query on the Microsoft Community.

  I appreciate your troubleshooting steps.

  As you said you get a 8024401C error after installing Windows updates.

  I need some information.

  1. What is the brand and model of your computer?
  2. Do you remember the numbers KB installed updates?
  3. What happened when you performed the reset and restore? Do you have an error code or message?

  I suggest you to please provide us with the number of the last update that you have installed on your computer.

  See the link given below to find the number of the update through view update history. Please refer to the appropriate section (how can I find out what updates have been installed).

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  Try the methods.

  Method 1:

  As you have already tried to reinstall your Windows, I still once suggest to run the system update tool as system update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008.

  See the link below for the procedure:
  http://support.Microsoft.com/kb/947821

  Method 2:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tells you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  I hope this helps. Please let us know the results. We will be happy to help you further.

• Satellite L10-194 cannot run after recovery

  Hello! I used my Satellite L10-194 for a few years, and he started to be really slow, I decided to reinstall the system (recover) to make it cleaner and faster.
  I found my recovery of product L10 DVD - ROM, but when I finished the system restore would not start. I tried the recovery for some time, and it does not help. Whenever I try to start the computer, when it goes to load the system it just turns off (I think that it is something like the blue screen flashes for a second).

  I checked the disk file image in advanced mode and HARD, and that's OK. But when I do HDD-> image in advance mode, after it is sometimes a moment when I have access to the command line. After getting "dir C:" I don't see a Windows directory (?), when restarting the computer does not work as usual. I'm doing something wrong?

  I tried another CD of product recovery of the second Toshiba laptop that I have, and it works, it installs Windows but without pilots and things (it's a completely different model from Toshiba). What should I do? I'm not sure if the use of system preinstalled for model is the right idea (and legal)?

  I had some problems with my front L10, and I had to change the motherboard. In service, what they said that they can't find a motherboard identical like that in my L10, so they used some different model. It's maybe the problem of recovery does not work why?

  PS.
  Sorry for my English, please correct me in my errors, to help me improve the language :)

  > I had a few problems with my front L10, and I had to change the motherboard. In service, what they said that they can't find a motherboard identical like that in my L10, so they used some different model. It's maybe the problem of recovery does not work why?

  I think that this is the reason why your laptop does not start after the recovery procedure.
  Seems that the drivers that are part of the image are not compatible with the new motherboard.
  Maybe the driver chipset or make sure you graphics card drivers some worries and windows crashes before starting the system
  Maybe you could star the windows in safe mode. Press F8 just after pressing the power button / stop. Then choose Safe mode.
  In safe mode, uninstall the chipset driver and the graphics driver and then try to start it again.

  If that does not help, then install windows using a clean Microsoft CD.
  Pilots should be placed on the page of European driver of Toshiba.

  welcome them

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

• 0 x 80244004 error after installing Windows Update Agent 7.6.7600.256

  After installing Windows Update Agent 7.6.7600.256 22/06/2012, I no longer see the Windows Update page when I run Windows xp and get this error 0 x 80244004, any response?

  Hello

  I saw an answer posted by (DevekY) and it's here:

  (Go to Advanced Setup ESET
  Web and email-> Web access and anti-phishing protection-> HTTP, HTTPS
  Installation scanner HTTPS-> HTTPS filtering mode

  Select "do not use HTTPS protocol control")

  I did this and solved my problem (have no more error 0 x 80244004)

  But what do you think? My computer will not be endangered?

  Thanks a lot for your time to help me.

• Satellite L10-232: black screen after closing the lid.

  Hello

  I moved my laptop (satellite L10-232) in another room, it wasn't stop (just closed it). When I opened it there was nothing on the screen and the battery is not empty (processor still does some things). Anyone know how I can fix this problem?

  Thank you

  Easy...
  PowerManagement is weaker and less stable features on any laptop. (especially with the defective batteries).
  NEVER try to count on the home screen etc. It will work time 999 and 1000 it don't.
  Now, you're done with a laptop computer hanging.
  The ways:
  1. the easy way:
  -push the power button and keep your finger on it for 10 seconds. (5 is enough, 10 to be sure)
  -remove the battery
  -plugin powercable
  -push the powerbutton

  2. the less gentle way:
  -remove the power cable
  -Remove the battery
  -wait 24 hours
  -Insert the power cable
  -push the power button

  3. the hard way: make sure THAT YOUR HARD DISK IS NOT PASSWORD PROTECTED, to OTHER YOU LOOSE YOUR DATA.
  trying to understand hat is the startup key sequence to reset the BIOS at startup. (it should be described in your manual somewhere)

  4. the hardest way:! ONLY BY A PROFESSIONAL!
  IF MAKE SURE THAT YOUR DISK IS NOT PROTECTED BY WORD, OTHERWISE YOU LOSE YOUR DATA.
  The laptop must be open and all batteries must be removed. All the capacitors must be emptied (leaving a laptop without the battery for 72 h). Then turn on
  the laptop.

  Please note that I can't be held responsible for any damage or loss of data under any circumstances.

• Satellite L10 screen very dark after disassembly

  Hi all

  I took my Satellite L10 part to swap on the plastic dessu for a damaged joint.
  Now is superb, but something was wrong as the screen is not be enlightened now.

  Anyone have any suggestions what else could be?

  If I look at the screen to light, I can see the desktop, I bought a new UPS thinking that was the problem but it has not fixed it :(

  Maybe a second faulty inverter? I checked all connections etc...

  Thanks in advance!

  Rich

  Hello

  For me, this looks like the inverter issue.
  If you see the desktop and the image appears as behind a thick mist, then in most cases this problem is related to the inverter FL.

  I put t know if the inverter is faulty or if you have connected all the bad parts
  The two may be possible, and so I recommend you to speak with a local laptop technician.
  In your case, that the old parts must be checked first, before buying a new FL inverter, cable, etc.

  See you soon

• Satellite 1605cds: RAM has not reported in Windows 2000

  Hello

  I have a 2nd hand Toshiba Satellite 1605cds/4.3 (amd k6-2 450 mhz basic system).
  It has 32 MB of ram on board and a dimm slot - so put in a memory of 128 MB.

  But I read this Web page:

  http://fandelem.com/toshiba2.html

  where it says it can be improved with a 256 MB memory module!

  I have it plugged in and it correctly sees 288 MB (32 MB onboard 256 MB on housing) in the bios.
  When I boot from the partition of Windows 98 Second edition, it shows the 288 amount of ram.

  .. .but when I boot on the partition of Windows 2000 Professional, it displays a blue screen saying that the bios is not an improved ACPI bios. It says that I have to push the F7 key during the installation of Windows 2000 to disable ACPI and install HAL.

  But if I remove the 256 MB slot, Windows 2000 starts correctly without any problem.

  I tried to reinstall Windows 2000 by pushing the F7 key during installation, but then Windows 2000 shows that the 32 MB of ram.

  So, what can I do to run Windows 2000 and 256 MB module?
  The bios is the last that can be downloaded on the web page of toshiba.

  Thanks to all and sorry for my English.

  Hello

  According to your description W2k said to update the layer HAL (Hardware Abstraction Layer). In Windows 2000, there are several ways to solve the problems associated with the material (HAL, Hardware Abstraction Layer) Abstraction layer that may occur due to bad detection, an obsolete or non compliant Advanced Configuration and Power Interface (ACPI) Basic Input/Output System (BIOS) or incorrectly installed computer type or manually.

  For more information, please see this Microsoft support site:
  http://support.Microsoft.com/kb/237556

  But as I know Toshiba supports the 128 MB only on this unit and if you want to use more ram you can do at your own risk!

• Satellite Pro 4200 drivers and utilities for Windows 2000

  Hello

  Recently, I decided to upgrade the OS on my satellite pro 4200 to Windows 2000, it was previously under Windows 98.

  After the installation of Win 2000, many components are missing or not working not properly (display, missing utilities, etc.). I couldn't find the Win 2000 drivers in your download section.

  Could you please help me?... is there any service pack with all the win 2000 drivers and utilities of this model? Where can I download from?

  Thank you very much

  Hello

  Littco said, all the drivers are on the Web site.
  In addition, check if you can install a driver that was designed for ie Win NT or Win Xp. sometimes, these drivers work on W2k operating system.

  Good bye

• LabVIEW 2009 .exe works only with windows 2000

  I created a simple vi with Labview 2009 for resetting a counter in the registry key. I changed it to an exe. The program works well on any machine with XP, but it does not work on the machine, that I need on which is running Windows 2000 SP4. I have installed the runtime of 2009, but I keep getting an error when it starts the vi is not executable and I need the full development to correct errors. But like I said it works everywhere else. I tried other exe wrote in LV2009 on this machine and they work. Is there something in my vi which is not compatible with Windows 2000?

  Thank you

  dkfire wrote:

  If you build an exe on a XP machine, then it will work only on XP.

  You need generate the exe on a Windows 2000 machine to make it work.

  Simply not true - even close to not being not right.

  Chris,

  My guess is that the .NET component is not present on the pc of w2k.

• Error MicrosoftUpdate and Windows 2000 AVG 9.0 - u going to post a fix for this? Thank you

  On AVG, I noticed that your update wiped out the DLL AVG.exe

  and you are aware of this - you're going to publish an update to fix this error

  If so - I not crazy with it, now that I'm not a computer expert of all means and

  want to be messing with the registry of the dll

  See http://groups.google.com/group/microsoft.public.exchange.admin/browse_frm/thread/b7d2d495377bb210

  The updates-in-it comes to Visual Studio or Visual C++, not Windows 2000 or Exchange itself.

  Extended support for Windows 2000 SP4 ended July 13, 2010. There will be no other specific updates Win2K so you should not update the Win2K computer.

• Satellite 1620CDS - need Multimedia Audio Driver for Windows 2000 Pro

  I recently had to reinstall my laptop Satellite 1620CDS with Windows 2000 Pro, but I can't locate the multimedia Audio device driver! and as such I have no sound.

  Any advice on how I could find this driver, would be much appreciated...

  Just FYI: your laptop has Crystal 4281 audio card. I hope you find the driver on the page given by the previous user. It is in the list.

• Satellite A100-507: looking for a driver Windows 2000 Prof

  I'm sarching for a driver for the ATI Radeon Xpress 200M 128.
  Windows 2000 system teacher.
  Please help me.

  Hello

  To my knowledge, the Satellite A100 is a brand new model, and in my opinion there is no other driver for this unit at this time.
  In addition, I recommend only using a graphics driver Toshiba because this driver is something different and includes coverage of overheating.

  Good bye

• Dual boot Windows 2000 and Windows XP. How can I remove Windows 2000 safely without affecting Windows XP?

  I have 2 OS need to remove a

  I have 2 operating systems, Windows 2000 Pro and Windows XP How do to remove Windows 2000 Pro without messing my XP?

  Try to run, type: diskmgmt.msc

  MSC, locate & R.click on the partition of 2000, select 'Delete' of the score.

  Once through, locate the space, R.click now black on it, select "create partition".

  Follow the instructions in the wizard and use the default settings... Once thru, L.click on the new partition,

  go to the actions, all, select 'Enable', exit msc. You can / could also do it in

  the recovery console, in the console, type: DiskPart in DiskPart, highlite 2000 partition.

  Select 'remove', once by, select "create partition", once through, press ESC.

  then type: FORMAT D: D: NTFS being the new partition, are still active in

  diskmgmt.msc