Satellite L10-194 cannot run after recovery

Similar Questions

• Satellite A215-S7422 - cannot run the recovery disc - model corrupt system?

  When you try to run reinstall on my Satellite A215-S7422 drive, the installer won't work, telling me that "this CD is for Satellite A210 A215 Satellite. Please use good CD.

  When I run the information system, it identifies the model of my system a string as gibberish in the sense of: ' t.o &.

  He could not work because of this? Is there a work around? How can I give a valid system model?

  g

  Hello

  I have heard on a question as when the DMI information is missing or damaged. You can read about it in similar topics.

  In any case, I think this happens when the motherboard was exchanged and the service center I forgot to update the DMI information on motherboard. If the computer model isn't recognized properly.

  You should contact Toshiba service center. Guys can update DMI information and help you solve the problem. :)

• Satellite L10-194: update display driver to play X 3 meeting

  Hello

  I have a Toshiba Satellite L10-194 with
  a graphic card intel 82852/82855 GM/GME graphics controller
  and the current driver is 6.14.10.3929.I want to update
  because I can not play with a 3D game: X3Reunion.With some research I found a graphic driver on a Web site of intel, the driver is v14.18 WINK2K_XP14.18.exe...

  I can install it without harming my computer?

  Hello

  You can use but no Toshiba driver cannot damage the graphics card.
  You can use it at your own risk!

  Toshiba drivers are not similar with the original manufacturer s graphics drivers. The original graphics drivers are not designed for laptops for a desktop PC. Desktop Pc graphics cards has a clean cooling system and portable graphics hasn t an own fans. In this case, Toshiba drivers have protection against overheating. So sometimes, the graphics card can t works with 100% performance and you can always find the most recent updates.

  concerning

• Re: The Wireless does not work on Satellite L10-194

  Hello
  I use Satellite L10-194 and I ve lost the restore cd but I have formatted anyway, since I found all the drivers and software.
  Only the work of doesn´t wireless. I try one on site and it dosnt work it keep showing on the hardware control network missing :(
  I tried everything and nothing works. Can I download windows xp sp3?
  Please, I have needs your help or any other site to download the software or to download the recovery for this model cd.

  concerning

  Hello

  There are only two cards possible Wlan you may have; Intel or Atheros WLan card.

  In my opinion you have a _Intel_ WLan card;

  You know Toshiba WLan Portal?
  You will find all WLan drivers and some useful documents in the FAQ:
  http://APS.toshiba-tro.de/WLAN/

  It s worth to take a look on this portal.

  Good bye

• Satellite L10 - Hotkey.exe error after booting Windows 2000

  I've installed Windows 2000 on my Satellite L10 rather
  XP. After installing the utility Hotkey-I get an Error Message at every boot:

  Hotkey.exe - Entry Point not found
  The procedure entry point WTSUnRegisterSessionNotification could not be loaded into the WTSAPI32.dll dynamic link library.

  Same error Message When you try to manually start the Hotkey.exe.

  How can I solve this problem? The system works, but the
  Keys not.
  Thank you in advance for help!

  P.S.: As I read on the web, this error has nothing to do with the missing operating system XP - maybe the HotKey software does not work with Windows 2000. Where can I get a Hotkey software work for Windows 2000 for Satellite L10?
  I try to find it on the download from Toshiba site, but there is that some drivers for the L10 on Toshiba.com and the European server are only readers for XP :(

  Hi turmeric

  All the drivers, tools, and utilities are designed separately for each operating system. This means that you can not use tools designed for Windows XP Home edition with other operating system. You don't find utilities and tools because your device is not supported for the Windows 2000 operating system.
  I'm sorry.

• Satellite L10-194: need other drivers and WiFi

  Hello

  I am trying to determine the correct drivers WiFi for my laptop Toshiba Satellite L10-194. There seems to be at least 4 different drivers available, but I have no way to determine what network card, I installed it as the hard drive has been wiped.

  The only drivers I can find are listed in the link below:

  http://tinyurl.com/2jwuhm

  I am also located in the USA, and I do not know if these drivers do not suit my region of use. What matters for WiFi frequencies/channels?

  Kind regards.

  Hello

  At the bottom of the unit, you should find a label.
  Worth mentioning WLan card details on this label. Select this check box.

  PS: You received the Toshiba tools and utilities. On this CD, you will surely find the right WLan driver.

• Satellite A205: New HDD - error after recovery

  I replaced the hard drive in the Satellite A205 and used the Toshiba Recovery and disc drivers/Application to re - install the drivers and Windows Vista.

  However, when the recovery ends and the windows starts for the first time, I get a message: Windows Setup could not configure Windows to run on a hardware on this computer.

  The new hard drive is a Western Digital 500 GB SATA.
  Is there a conflict with the new hard drive?

  Anyone have any ideas?

  Thanks for any help.

  Hello

  It might be possible that there is a conflict with the new HARD drive.
  Try to start Windows Vista is SafeMode (F8-> safe mode)
  Is this possible?

  You can also try to repair the system.
  F8-> fix my computer

  Another question:
  Have you tried to install the system using Microsoft Windows disc clean?

• Satellite M40X 299: no boot after recovery

  Hello

  I have a problem with my satellite M40. After a problem with spy software, I tried to format my pc.
  I did a restore of the system with the original cd. At the end of the mind, I pressed ctrl + alt + delete to restart as it was written.
  But nothing happens, I have only a cursor in the upper left corner of the screen and windows does not start. I did the operation 3 times and it's always the same result.

  I don't know what more I can do.

  Thanks for help.

  Excuse me for my English

  It's very strange. Can you get the CD of Microsoft facilities and try to install the OS? I'm really interested if the same thing will happen again.

  Please don't be crazy on me because I t n wrote a few exact explanation but after recovery without end I've done in the last 8 years I have never seen anything like it.

• Satellite L10-232: black screen after closing the lid.

  Hello

  I moved my laptop (satellite L10-232) in another room, it wasn't stop (just closed it). When I opened it there was nothing on the screen and the battery is not empty (processor still does some things). Anyone know how I can fix this problem?

  Thank you

  Easy...
  PowerManagement is weaker and less stable features on any laptop. (especially with the defective batteries).
  NEVER try to count on the home screen etc. It will work time 999 and 1000 it don't.
  Now, you're done with a laptop computer hanging.
  The ways:
  1. the easy way:
  -push the power button and keep your finger on it for 10 seconds. (5 is enough, 10 to be sure)
  -remove the battery
  -plugin powercable
  -push the powerbutton

  2. the less gentle way:
  -remove the power cable
  -Remove the battery
  -wait 24 hours
  -Insert the power cable
  -push the power button

  3. the hard way: make sure THAT YOUR HARD DISK IS NOT PASSWORD PROTECTED, to OTHER YOU LOOSE YOUR DATA.
  trying to understand hat is the startup key sequence to reset the BIOS at startup. (it should be described in your manual somewhere)

  4. the hardest way:! ONLY BY A PROFESSIONAL!
  IF MAKE SURE THAT YOUR DISK IS NOT PROTECTED BY WORD, OTHERWISE YOU LOSE YOUR DATA.
  The laptop must be open and all batteries must be removed. All the capacitors must be emptied (leaving a laptop without the battery for 72 h). Then turn on
  the laptop.

  Please note that I can't be held responsible for any damage or loss of data under any circumstances.

• Satellite A110-178 cannot run the Da Vini Code game

  My satellite A110-178 cannot launch the game "The Da Vini Code". following error occurs:

  Encountered exception! You want more information (will take several seconds to determine)?

  When I choose 'Yes', the following lines appear:

  (Slayer) Address of exception

  [no info game crash]

  IMAGE HELP STACK:
  TArchive::operator = + A9D22

  MAP FILE STALKWALK:

  All I can do is press 'OK '.
  the program stops, and that's the end of it.
  I don't know what that means, is there a problem with my hard - or software?

  If anyone can help me and translate the language of code of my computers, I'll be gratefull for this,
  because this is not a cheap game,

  Thanks in advance,

  Davina

  Post edited by: Davina Deleye

  I recommend you to check some forums on this game. I found one under http://www.isohunt.com/forum/viewtopic.php?p=126110

  Maybe you can find answer here. Read it carefully.

• Satellite L10 screen very dark after disassembly

  Hi all

  I took my Satellite L10 part to swap on the plastic dessu for a damaged joint.
  Now is superb, but something was wrong as the screen is not be enlightened now.

  Anyone have any suggestions what else could be?

  If I look at the screen to light, I can see the desktop, I bought a new UPS thinking that was the problem but it has not fixed it :(

  Maybe a second faulty inverter? I checked all connections etc...

  Thanks in advance!

  Rich

  Hello

  For me, this looks like the inverter issue.
  If you see the desktop and the image appears as behind a thick mist, then in most cases this problem is related to the inverter FL.

  I put t know if the inverter is faulty or if you have connected all the bad parts
  The two may be possible, and so I recommend you to speak with a local laptop technician.
  In your case, that the old parts must be checked first, before buying a new FL inverter, cable, etc.

  See you soon

• Satellite P300-220 - cannot run Recovery Disc Creator

  Hello

  Yesterday I received my new laptop (Satellite P300-220). Today, I'm trying to make a record of recovery and launch "Toshiba Recovery Disc Creator", the hourglass appears for 3 or 4 seconds but nothing else, cannot access the application.
  Any idea?

  Thank you

  Hello

  Do you have something to change on the laptop before you start the Toshiba Recovery disk?

  It's not easy to say which is the reason, but in your case I would start the recovery of HARD drive option. Go to the advanced boot menu, select fix my computer.

• Satellite 1800-400: cannot run/install applications after installing XP

  I bought a Satellite 1800-400 for my daughter for her school work, formatted, installed XP pro, and when I tried to install the software for a wireless card (3Com) for internet access, he said only: "the application failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.

  So I tried another card (Belkin) software it says "D:\ is not a valid Win32 application". So I tried to install the printer software and he says: 'the entry point of procedure not found in KERNEL32.dll dynamic link library.

  So I thought I'd try XP Home, exactly the same, Win 98 and WinME function without problem.
  I have also flashed the Bios, but it made no difference.

  Someone at - it ideas

  Simes

  Hmm, it s very strange. For me, it seems that some applications are not compatible with Windows XP. I m not 100% sure why it happens, but I put t think that it s a RAM problem because the other Windows Me and 98 to work properly.
  But nothing is impossible

  What version of BIOS is installed on your laptop? On the Toshiba page pilot 2.20 BIOS was released.
  If your laptop uses an older version, you can try to update.

• Satellite Pro L875: Cannot burn DVD Recovery Media Creator and win 8

  I have a L875 Pro of the Satellite with Blu - ray burner.

  I tried to create the recovery DVD disc, the burn process stopped and error guest asked me to check if the disc is damaged or scratched. After the burning process, the DVD was not empty and some data wrote on this subject.

  I tried to burn the data disc in windows 8. the burner is not started. I'm only able to add files to the disc.

  I play Blu - ray movies and dvd movies, blu ray player was fine.

  I found information on the appropriate corresponding to the burning speed dvd disc speed.

  How do I know what speed the burner support?

  How to burn a DVD or Blu - Ray in windows 8? (I looked on the Microsoft forum, but the solution did not work.)

  It would be great if someone respond and make the drive burn discs.

  As a first step, it will be interesting to see why you cannot create recovery discs.
  Have you used vacuum on DVD-R media? Otherwise please use it and buy a product of high quality like Verbatim or TDK.

  Is there an option to create the USB stick recovery?

  Combustion under Win8? Have you tried to use some burning as NERO applications?

• Satellite A205-S4707 - cannot run camera on Windows 7

  Hi all!

  I have Toshiba Satellite a205 s4707, with Windows 7.

  It has the latest drivers Toshiba bios is after update, but I can't launch the camera. I tried everything I found on the internet but not worked for me.
  I tried to install a different software (not later), reinstall, update...

  I GIVE UP!

  Pls help someone! Show me that there is another way that it will run my camera!

  I have the driver installed, but in Device Manager, I have warning with "Chicony USB 2.0 Camera" - code 10.

  Help! PLS!

  Hey,.

  Error code 10 in Device Manager means usually only it s a driver problem...

  Which Toshiba page you downloaded the latest webcam driver?
  Using Windows 7 32-bit or 64-bit?

  In your case, I would like to delete the current version of the software of the webcam. Then restart your computer and install the latest version of it.