Satellite L10 - standby does not, the computer will automatically start

Similar Questions

• Application Finder does not, the computer will not be closed

  I am running OS X El Capitan 10.11.5 on my iMac (2.9 GHz Intel Core i5, 16 GB 1600 MHz DDR3).

  Since the update, I noticed that I can't install the latest JAVA, and now (in the last few days) my Application Finder is "not responding." Or he will raise. The Finder application is unresponsive (no doubt) is causing my computer resist the stop down (and restart) command. So I am only able to stop it by pressing the button. Help, please! I ran a utility disk "first aid", but it says there is no problem.

  Hello. Try restarting your Mac in safe mode:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• Satellite A100-383 does not - the battery is not

  Hi all

  I own a satellite A100-383 (PSAARE) that does not start when the battery is totally empty, or if I leave without the battery of the day to the next. The battery will charge not façade is and all the lights are off. I should always have a load on my battery and don't let not unplugged more than 2 days.

  If for some reason, my battery was completely empty, Plug and unplug the power supply from the wall outlet would make all the lights increase and charge the battery again.

  Unfortunately, I went on vacation and I forgot my pc unplugged and it does not charge or turn on. ? The headlights are off. Tried my dear old method to connect the unit several times with battery and without it with no luck... I could see a connection for a second or two, but I wasn't fast enough to plug in and they are off.

  I would be so grateful to you all if you give me a help to put it on my pc. Once I have it on the load and back I'll buy a new battery for sure.

  I look forward to reading your advice.

  Thank you all in advance!

  Post edited by: Soneu
  The battery will charge not façade is and all the lights are off, when the battery is completely empty.

  Post edited by: Soneu
  Running Windows 7 32

  Thanks for the comments. I just want to say that you should buy high quality and Toshiba of origin of the product and not a cheap no. product name.

  Good luck.

• Satellite L10 103 does not detect my WLAN

  Hello again,
  Well, now my restore CD does not work I open a topic on the real problem.

  My toshiba that satellite L10-103 doesn't detect my WLAN, he finds other local networks without WIRE, but not mine.
  You have evidence?

  Hello

  Are you sure that the internal Wlan card supports the WLan standard even as you have WiFi router at home?

  My old laptop can't detect my WiFi at home because the wifi card does not support the Wlan standard as my router.
  I had to buy a USB WLan external to connect right old portable wireless stick.

  PS: Try to update the Wlan driver. Sometimes it helps

• Satellite L10-119 does not work properly

  Hello, at the beginning I sorry for my bad English: P

  My laptop L10-119 are about 3 years old. I have no problem with it until now, I recall. Today, after 20 minutes of work I turn it off and everything was OK... until I want to turn it on again.
  When I press the laptop power button does not start. HDD led is lighting 0, 5-1 s and tun off the coast. I think that the hard drive is not working but I do not know, the screen is black, Cpu fan works, cdrom and Usb ports are powered. He is driven off. Power LIGHT is off even when the power is connected.

  I have not any ideas what I can do with this ;(
  Help, please
  Thank you

  null

  Hello

  It looks like a hardware problem. I mean if you didn t install anything or anyone pays (for example) some liquids on the machine, then the motherboard could be defective.

  The problem is that the machine is probably more under warranty and you will have to pay for a repair. But if you still want to keep the machine for a long time then click on the following link and contact an ASP (Authorized Service Partner) for a hardwarecheckup or a repair:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Sorry, mate, but I think that your machine is mounted to heaven. :(

• Satellite L10 151 does not load XP or drive recovery

  Hello

  I have a model of Satellite L10-151, and he won windows load t. Whenever I have try and run it, it says operating system not found. When I put the Toshiba recovery disks in that came with the laptop and I also bought a windows XP disk this load t won either.
  I also took the hard drive and put one in and it works fine it should be the hard drive but don't don t no what than the other.

  I also tried to install windows 7 that doesn t work either: s

  Help, please? The HARD drive has everything on it.

  Hello

  > I also pulled out the hard drive and put one in and it works fine it should be the hard drive but don't don t no what than the other.

  You can enter the BIOS (f2) to check if the hard drive recognized? It seems that your hard drive is fine, but it may be something wrong with the motherboard connectors.

• Satellite L10: TV does not not at all

  Hello

  I have satellite L10 series laptop. I have no problem on the tv-out until my last windows xp pro installation. I have the same system and utilities installed on front. but when I formatted my system and install os clear last. section of graphic properties, on the only section of mobile devices is selected. no other device dual display clone, monitor or desktop extended... bios and the display driver is more recent.
  Please help me. Thank you

  Hello

  Are you sure that you have installed all the drivers and utilities?
  In this order you must install all the utilities of this.

  Microsoft updates
  Sun Java Runtime Environment
  Driver Chipset
  Display driver
  Network driver
  Audio driver
  Touch pad Driver
  Driver Modem
  Modem region Select utility
  Network wireless driver
  Hotkey Utility
  YPP/power button Utility
  Utilities
  Console
  ConfigFree
  Screen saver
  Zoom utility
  Touch and launch
  PC Diagnostic tool
  DVD player
  Skins for Windows Media Player
  User manual
  CD/DVD Drive Acoustic Silencer

  Good bye

• Photosmart B010a All In One test print O: K: does not the computer print

  EGR: GIS. No error message in the control panel is READY, printed the test. Don't print your computer. 6220 with windows 7/64 bit HP computer. = network WI Fi of tiscali. the printer is connected with a cable to the computer. I also tried with the doctor. Please help me understand where I went wrong; I installed the last type of software and drivers available. Thank you, cordially Costanzo

  Photosmart All In One B010a stampa di prova 02: computer dal non stampa

  EGR: GIS. Message error nel pannello di controllo pulito PRONTA di Nessun, ha the prova stampato. Stampa NON to dal computer. HP computer a window 6220 con 7 64-bit. Rete is tiscali WI Fi. stampante e collegata con computer of al it cavo. Ho tried anche con doctor. Per favore save a just dove ho sbagliato. Ho da the Ultimo tipo di software e driver available. Grazie, Web Saluti Costanzo

  try to connect the printer to your laptop with USB connection.

• whenever I open a file, the computer will automatically create a shortcut in the same location.

  Suddenly, I realized that I had an abundance of shortcuts in each folder.  Shortcuts that I knew that I had not created.  As I paid more attention and also tested, I come to realize that whenever I open a file the computer created a shortcut to this file in the same folder location.  It matters not what type of file I opened, pdf, excel, word... I searched but I can't find if there is a setting where this can be disabled.  Another thought is that if this is some kind of virus.  I ran all the cleanings of my antivirus and malware, and they are.  Any input is greatly appreciated.

  Hi LVPreece,

  You can perform an analysis online on your computer by following the mentioned again link to check if your computer is running well below.

  http://safety.live.com

  This problem may also occur if the user account is corrupted, you can try to create a new user account and check if the problem persists.

  For more information, you can consult the following link to correct the corrupted user profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite L10-104 does not start after the battery totally empty

  Hello

  After leaving the laptop the weekend without the charger, the battery was totally empty. So I plugged back it it to charge the battery for a day.

  Now, when I press the power button the Green LED at the front lights up for about 3 seconds - nothing else is happening. No HARD disk does appear, no noise from fan coooling, nothing on the screen.

  Does anyone have ideas, what I could do to make it work again?

  Thank you

  Christian

  Hello

  Remove the battery and unplug the AC adapter from the laptop.
  Wait a little (1 hour) and then reconnect the two parts.
  Then try turning on the laptop computer. Maybe it helps

  If this will not help, then a hardware problem might be possible
  In this case the RAM modules must be verified in the first step.

  See you soon

• I have the hp photosmart c4780 who does not the computer print

  I have a HP Photosmart C4780 that will scan documents, photos and will copy fine, but when I want to print something from my computer it will not print it. It will send things scanned to file appropriate as well fine. I ran diagnostics, reloaded the startup disk, and he says it's very good. My operating system is Windows Vista.

  How is the printer connected?  What happens when you send the print jobs to the printer - they remain in the print queue or just disappear?  Are there any error messages?

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• the speakers does not, the helmet will be

  Inspiron 700 m suddenly will not play the speakers of the main responsible for the sounds, system or audio from itunes or websites or anything.

  I plugged the headphones and those who are still working.    The speakers are not yet roaring they just died.  Is there a way to test to see if they are really dead or disabled in some way?

  Control panels is unchecked, nothing is cut, all the setting are how they always were, but now I can't turn on the speaker.

  running such sigma audio driver

  
  

• Satellite L10 - keyboard does not work properly

  Hello
  I have problem with my keyboard. I have install Windows XP from recovery CD and make updates Windows Update form. Sometimes, when I write something ex 1234567890, I see on the screen 123567890 or 123456790.
  I took the laptop to the service and they said that everything is OK, but for me it is not!
  What's the matter with him, can someone tell me?
  Thank you

  Hello

  Compare the version of the BIOS installed on the laptop with the BIOS which is available on the Toshiba page.
  If you use the old version, then you can try to update the BIOS.
  I have read that sometimes, a new BIOS might help.

• The product key on my Satellite Pro P300 does not work

  The product key on my Satellite Pro P300 does not work.
  I entered the key from the sticker on the back of the computer. What I am doing wrong?

  Hello

  Why use this product key?

  Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.

  Second, it's an OEM key and it will not work with other versions of Vista!

  Cheers mate

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.