Satellite L30 - why system shows 224 MB only?

Similar Questions

• Re: Satellite L30 - 134 PSL33e shows 896 MB of RAM, but 1.5 GB are inserted

  Satellite L30 - 134 psl33e-00e013g3.
  I have 2 memory slots, in the first place there are 1 GB kvr, then I add to the second slot 512 MB Hynix
  All of the memory two modules are ddr-533 (little difference in hours between them is present)

  If I click on my windows computer properties shows me only 896?
  On the official form of toshiba. subject memory says I can go to 2 GB of ram.
  BIOS is the latest version!

  How can I add more ram in this model?
  Aida64 shows me in the slot1 = kingston 1 GB
  SLOT2 = 512 hynix
  but aida shows that the memory system 896.
  All modules in memory works great separately in all slots...

  Thank you

  Post edited by: workman24

  Hello

  That says the BIOS?
  BIOS sees the 1.5 GB of RAM?

  As far as I know that the laptop can be upgraded up to 2 GB of RAM (2 x 1 GB)
  The ATI graphics chip also shared memory.
  This means that if you installed 2 GB of RAM, a main part of this memory would be shared by GPU.

  It would be interesting to know what value would be reported by system using a single module (1 GB or 512 MB)

  by the way: what memory is shown in DXDIAG?

• Satellite L30-101: System indicates the value of memory bad

  Hello

  I hope someone can help. Just bought the L30-101 with Vista Home Basic and 512ram (ddr2 pc2 4200). The specs say it can take up to 2 gig with a max of 1 gig per slot.

  Site of Crucial ram and there memory Advisor tool used for a stick of compatible 1 gig to another location of the source and bought a stick of 1 GB (ddr2 pc2 4200). It was put in the laptop, but instead to show 1.5 GB of ram it showed only a little more than 900 MB - so he was recognizing the new stick and using a small part for shared graphics etc. but was totally ignoring the original 512 stick.

  I tried move but opposing slots always get the same result. Also tried the two sticks separately and work well on their own, but when the two haven't inserted the 1 gig stick seems to be recognized. Is this a compatibility issue?

  Ive tried to contact crucial themselves, but still have had no response, so thought I would try and choose someones brains here.

  Any ideas anyone?
  See you soon
  Nick

  Post edited by: silverback0001

  This is a compatibility issue, I think you should get a new memory.

  Sometimes it's a problem if you use different modules (size, brand, speed).
  Usually, these problems are presented if you have a noname memory.

  You must purchase another module of 1 GB instead of this the 512ram or replace the 1 GB with a new key.

  I've heard a user has how Kingmax and Samsung 512 MB 1 GB of ram in the L30 and everything is going well, he has no problem with him.
  I have two Samsung 512 MB modules and have no problem.

• Re: Satellite L30 does not start after adding another stick of 1 GB memory

  I bought 1 GB PC4200 533 MHZ DDR2 SODIMM memory module for my Toshiba Satellite L30 - 10v (PSL33E) to make it 2 GB. After you have added the 1 GB modules Satellite L30 wouldn't start. With only 1 GB, that it starts ok, with the other 1 GB origianal only boots ok. (The two modules are ZCE6 430 - K4T1G163QB Samsung 1 GB PC4200 533 MHZ DDR2)

  The two modules of 1 GB boot not together. I noticed that many others have had this problem. (please see
  This [t-22984]. post)
  On this forum, someone bought the CT12864AC53E memory module which works, however I can't find this on the site of Crucial.
  I've heard other purchase the sticks of memory CT572238 and CT572234 and have the same problems.

  Memory Advisor says determinative buy the CT572234 memory sticks.

  I have also updated the bios to V3.10, still does not start with the two modules.

  I'm ready to buy 2 new modules, but what 2x1GB memory works?
  Any help would be greatly appreciated...

  Post edited by: quigs1969

  > 1 GB strips boot not together. I noticed that many others have had this problem.

  For me it s case;
  The two modules don't work together
  Seems the modules are not compatible there is only one solution. Replacement of RAM!

  Try other RAM modules.
  I bought a few modules from Kingston and made good experience

• Satellite L30 - 10W shows 894 MB of RAM only

  Hello

  With advance sorry for my English. I'm Polish and I use Google Translate because I know too much English but I think that you can somehow not the TRAINER TR? in spearwood.
  I have a problem that really bothers me. Namely, the laptop I installed 1024 MB of RAM, but the bios and the system itself (Windows XP SP3) I can detect only 894 MB of RAM. And my question is: is it possible, it not? And if so, why. I tried to manage myself somehow. Convert the sequence of the RAM (in the slot machines), set individually, but it still does not work. Below the type of RAM (as both are identical). Everest he showed to me.

  Module name: Hyundai HYMP564S64CP6-C4
  Serial number: 04004172 h
  Manufacturing date: week of 4 / 2007
  The module size: 512 MB (2 rows, 4 banks)
  Module type: Unbuffered
  Memory type: DDR2 SDRAM
  Speed of memory? : DDR2-533 (266 MHz)
  Module width: 64 bits
  Voltage of the module: SSTL 1.8
  Method of error detection: no
  Reduced refresh rate: 7.8 (US) Auto Refresh

  Memory clock:
  5.0 - 4-4-12 @ 266 MHz (CL-RCD-RP-RAS)
  4.0 - 4-4-12 @ 266 MHz (CL-RCD-RP-RAS)
  @ 200 MHz 3.0 - 3-3-9 (CL-RCD-RP-RAS)

  Manufacturer of memory modules:
  Company: Hynix Semiconductor Inc.

  Well well, to throw in addition to information about my BIOS:
  BIOS type: Phoenix
  BIOS date: October 24, 2007
  BIOS ID: Phoenix 4.0 Release 6.1 NoteBIOS
  BIOS OEM: v3.10
  Chipset: VIA 82 3038 rev 97
  SuperIO: unknown
  Manufacturer: Toshiba
  Motherboard: Satellite L30

  Hello

  According to the specifications of the laptop your L30 has ATI RC410MD graphics card. I m not 100% sure, but I assume that it is the shared memory card which means that certain amount of RAM will be used for graphics operations. Due to this RAM more low value appears in cell s system information.

• now my restoration of the work system - properties - show two drives C: and D: WHY? I want to only show him C: _

  Hi I noticed recently that now my restoration of the work system - properties - show two drives C: and D: WHY?  I want to only show C:

  He has never done this before and I don't want to show him D: at all, I have a HP and the D: drive is my restore disc, with D: listed means that he could get crushed and I don't want to appear in the recovery menu.

  How can I delete the D: drive on the recovery menu but the C: DRIVE ON leave...

  Thank you

  Hi I noticed recently that now my restoration of the work system - properties - show two drives C: and D: WHY?  I want to only show C:

  He has never done this before and I don't want to show him D: at all, I have a HP and the D: drive is my restore disc, with D: listed means that he could get crushed and I don't want to appear in the recovery menu.

  How can I delete the D: drive on the recovery menu but the C: DRIVE ON leave...

  Thank you

  With all due respect, you are incorrect. You simply did not notice before D drive. D drive is a logical drive. To the best of my knowledge there is no way to prevent it from the show. However, simply disable the system for D drive restore.
  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Memory not correct system on Satellite L30-105

  I just purcased a Satellite L30-105. It is supposed to be 1024 MB (1 GB) of Ram installed.
  Windows and the BIOS see 894Mb
  In the BIOS it reads memory system: 633 MB
  Extended memory: 894 MB

  Should he not see the complete 1024Mo?
  Can I have a problem with the installed memory?

  Thanks a lot for any advice.

  Hello

  I completely agree with Abe83.
  The graphics card shares memory with the main memory of the laptop and the free difference appears so as a memory system.
  It s nothing unusual and everything is ok with your laptop! Don t worry buddy ;)

• Satellite L30-149, only works with external monitor and VGA mode

  Satellite L30-149, Windows XP Home Edition

  Yesterday I did face the following problem:

  I swithched on my laptop but I have nothing on the screen. I tried to reboot several times, but it did not help. If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  I plugged on the external monitor. With that he gives a little more. The Intel logo with the instruction how to reach configuration etc. Then Windows logo but when it should ask the user, the external monitor going to sleep mode and nothing happens after that.

  And an external monitor, I managed to connect to Windows in safe mode and also in VGA mode. In VGA mode, I tried to change the resolution, after that I got black screen again and I had to start.

  Now I wonder if I could do something (update of drivers, etc.) or should I go to the store where I bought the laptop and ask them to fix it. This look like a problem covered by the warranty?

  --
  Upgrade to this message (what happened after that I wrote the above text).

  I turned on the laptop again. I thing the lightning from the room is now better because I noticed that the laptop seems to work (almost) correctly. Windows starts normally, I can faintly see the desktop. This seems to be a problem in the background ligthning. FnF7 does not change the situation.

  Post edited by: mpetas

  > If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  This sentence is very interesting.
  Sounds like a question of FL-ups!

  It is a small part behind the screen and control the backlight of the screens.
  Usually, this part is not very expensive and the replacement is not complicated to a technician for laptop.

  If your warranty is valid, then everything should be done for free.
  Try to contact the ASP in your country and ask for later handling.

  Greetings and good luck

• Satellite L30 initialize not up - show a j and blinking cursor

  I had a Satellite L30 a few years without worries.
  Now it will not start upward, quickly moves through the screen Toshiba for 2-3 seconds, then a black screen with 'j' in the upper left corner and a blinking underscore. The unti will beep with each keystroke.

  She not go!

  The value of the default BIOS and try to start the operating system preinstalled in SafeMode (F8 at startup).
  Can you do this?
  Can you enter the advanced with F8 boot parameters?

• Satellite L30-101 starts with only the PXE message

  Hi all

  I have a problem with my Satellite L30-101 (33rd PSL)
  When I start this is the message I get

  PXE - E61: MEDIA TEST FAILURE, CHECK CABLE

  PXE - MOF: EXIT PXE ROM

  OPERATING SYSTEM NOT FOUND

  I replaced the HARD drive, but I still get the same message

  Any idea?

  Thank you
  Sarra

  You replaced the HARD drive.
  That is fine, but did you install the operating system using recovery on this new HARD disk media?

• When I turn on my Satellite L30-11, the only controls are brilliant

  Satellite L30 - 11 d. When I press the power botton only controls are shining, the screen is black.

  What might be broken? Sorry for my English I'm rather week

  Hello

  I do not know how to test, but it is possible that the graphics card is defective. Maybe you should contact the nearest authorized service provider. They check your laptop.

• How can I remove the full name of the computer in my house windows basic.why that my system shows me on the field?

  I have a laptop computer HP with windows vista. My system shows that it is on the field.

  As I didn't join field that I don't know why he's on the field. I won't be on the field.

  so I want to remove the full computer name. How can I do so.

  Hello

  ·         When you connect to the internet from?

  ·         How do you know if your computer is on the field?

  ·         Is this a brand new computer?

  I suggest you follow the steps mentioned below:

  Method 1:

  Try it, you can select a network connection and remove it from the network and sharing Center. This should allow to forget any field that you could connect the computer.

  Method 2:

  If it is a brand-new computer nine try to reformat to get all the information system back to factory settings.

  Note: save all the important documents first.

• When I open gadgets why it show-Desktop gadgest are managed by your system administratir

  When I open gadgets why it show-Desktop gadgest are managed by your system administrator

  Hello

  This probably means that a system administrator has used group policy to disable the desktop gadgets and prevent users from installing new gadgets. If you use a company computer that this may have been done in response to Microsoft is retiring from Google desktop gadgets platform initially because of security concerns.

  You will need to contact who has administrative privileges on your computer if you want to re - turn on the desktop gadgets.

• Why my account showing that there only 2 GB when he was just 20GB available. He is a paid account.

  Why my account showing that there only 2 GB when yesterday evening, I had 20GB of available. It's like one became a free account and it's a narrative to education.

  Kindly Contact customer so that our support team can help you with this.

  You can use: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• Satellite L30-149-PXE-E61: Media test failure, check cable of

  Hello!

  My Toshiba Satellite L30-149 with the PSL35E-002002NS model number is equipped with a MK4032GSX drive HARD 40 GB, Bios V 1.90 and HP Windows XP Home edition.

  IT stops during startup with the text.

  For Realtek RTL8139 (x) /8130/ 810 x PCI Fast Ethernet Controller V2.13 (020326), PXE - E61: Media test failure, check cable PXE - M0F: exit ROM PXE, operating system not found.

  This occurs even if the disc is removed and seq. boot is changed so it should search the CD/DVD and even though the power and the battery has been disconnected for 15 minutes. If the power were during 20 hours them lights upward by DVD for a short so that at the next startup, but not if the power was turned off for a few minutes.

  Before he died, he showed the blue screen several times with diskerrors in the event log, and I was able to run/CHKDSK without errors a few times.

  Please advice how to reset the Fast Ethernet controller, not sure that a HDD defective only can cause the fault of I m.

  Thnx in advance
  Ben

  Hello

  I think that this is related to failure of HARD drive or lack of OS on the HARD drive.
  Is this message PXE ONLY appears if the portable computer is trying to boot from LAN.

  Means either the LAN was chosen in the BIOS as first boot device or operating system is not found on the HARD drive and so the BIOS automatically goes to the local network.

  So I recommend this audit in the worst case you will need to check if the new HARD drive would solve this