Satellite L300 - 20 d is not fully put into operation

Please can someone help me. I have a 20 d toshiba L300 and he simply stopped boot completely. It goes to a black screen with the cursor arrow or it shows just launch windows (recommended repair) when I click this, it does nothing. I tried to restore using the factory settings by pressing the zero key and then pressing power at the same time to try to get the repair menu, but still it does not work.

Please if then any suggestions would be greatly appreciated.

Thank you

Hello

Before you spend hours and hours looking for repair options I recommend to proceed with the installation of HARD drive recovery. After doing this you will again out of the State of the box and everything will work properly again.

How to start the installation of HARD drive recovery you can on this document - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

If you have any other questions please let us know.

Tags: Toshiba

Similar Questions

  • Satellite L300 (PSLB8C-0H901X) does not work

    My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no MESSAGE, nothing, lamp power and charge Get when pluged into anything else, any known issues? All the fixes, thank you in advance for your help.

    Of course, your laptop is completely dead. In such situation, there is no magic solution and I m afraid that you need professional help. If there is absolutely no reaction is maybe defective electronic power supply and the motherboard must be exchanged.

    As you know this is part more expensive so you need to check if this is the solution for you.
    Call, explain the situation and let it check your laptop.

  • Satellite L300 wireless works do not with my particular brand of modem

    Hello, I really need help here.

    My laptop is Toshiba Satellite L300, and I got it since April. I can't connect wireless via the modem I have here at home (netgear DGN2000).
    I can connect to other modems however. I've updated my wireless with Atheros card, but its still does not.
    If anyone has any suggestions please please please help!

    Thank you

    If you can connect to other routers on that it is proof that your laptop WLAN module works properly.
    In my opinion you cannot connect to your one because of wrong settings on your router.

    Your laptop detects your router? Your router is visible for Satellite L300?

  • Satellite L300-13R - WLAN does not not on Windows 7

    I am on Windows 7, it can't detect the wireless device, says I need to reinstall the driver, vista and xp driver install it as they say that they do not support my opperating system.

    I currently have to plug an ethernet cable to get internet. I use a Toshiba Satellite L300 - 13R PSLB0E.

    Please could I have help, thank you very much.
    P

    Hello!

    I think that this is not a problem. Windows 7 is only a beta OS and at the moment, the pilot decision-making is not very good.

    You might find some drivers on the site of the factory of the WLAN card. In your case, it should be Realtek.

    Good bye

  • Satellite L300-1BD - output does not work VGA

    Hello.

    I have a Toshiba Satellite L300 1BD (model PSLB8E). I've been usinng the VGA output to connect to my LG tv. It worked fine until last week. All of a sudden the TV won't not reckognized by cell phone. TV says no external device is connected. I tried different things: commissioning with the TV connected and not connected via the VGA cable, by pressing the FN + F5, removing the battery and pressing on the powerbutton, verified to the last videodriver, deleted the driver existing and installed new... unfortunately without result. I also tried to plug the TV with a different VGA cable, but no result. It is not the TV because I tried to connect the laptop to a TFT monitor and it did not work as well. Tested the VGA cable with my friends laptop: it works perfectly.

    The strange thing is: if I crochet TV up the laptop, I can hear the phone makes the his "new hardware found" and turns black same laptopscreen for a second, then everything appears on the laptopscreen. If I check the graphic properties with the right click on my desktop, I see they are no set for 'clone device ". As if the laptop computer knows, something is connected, but just cannot transfer the image to the TV screen.

    The graphics card is a Mobile Intel 4 Series Express Chipset family.
    The OS is Vista Home Basic (32).

    It's a shame that the VGA output seems to be down because I watch tons of videos and movies through my laptop on the TV screen. I don't know if this could be a software or a hardware malfunction. If someone has an idea or an idea, please let me know. Thanks in advance!

    Marcin.

    Hello

    All that you have done to test the functionality of a VGA port is good, but I assume that there must be a hardware problem and I recommend you to contact the nearest Toshiba service provider.
    Of course, on this path virtual, we can only speculate what may be the problem, but it should be tested correctly. If you want to last and ultimate test Exchange HARD drive, install original OS, you got with the functionality of your laptop and test with the factory settings.

  • Satellite L300-20W - DVD will not play

    Satellite L300-20W.
    Laptop CD in WMP fine plays.
    However if I try to play a DVD I get the message "Windows Medial Player cannot play the DVD because no compatible DVD decoder is not installed on your computer."

    If I try to use a Toshiba DVD player, a box opens (with clouds in there) and almost immediately I get the message "Toshiba DVD Player has stopped working" and then "Windows will close the program and notify you if a solution is available," but of course he never advise me.

    Any help much appreciated. (Old man and not very technical)
    Thank you very much.

    Hello

    Regarding the error code: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer. »

    It seems that your Windows Media Player does not have the necessary plugin DVD decoder that allows you to watch DVDs.
    See this MS knowledge base article:
    http://support.Microsoft.com/default.aspx?scid=kb;en-us;306331

    I also recommend to install a codec that allows you to watch other videos stored in other formats.
    K - lite Mega Codec Pack is free and contains all the codecs.

    If you are not able to use the Toshiba DVD software you must reinstall this tool.
    I think that the most recent version is released on the European driver Toshiba page.

  • Satellite L300 - 1 9 does not start safe or normal mode

    Hello

    My computer does not load to the top of the security mode or normal mode.

    Although Macafee, my virus protection software provider believe their recent problems are to blame they have offered no solution and instead asked me to load windows with my "installation disk".

    I can't find it, where to do it? (p.s. my computer is the Satellite L300 - 9 1 series.

    Thanks in advance.

    Hello

    If you are not able to start Windows try first HARD drive recovery option:
    http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

    If this does not work, you need the recovery disc you can order here:
    https://backupmedia.Toshiba.EU/landing.aspx

    Welcome them

  • Satellite L300 - 1AP PSLB8E starts not--a black screen and blinking cursor

    I have a Satellite L300-1AP model no PSLB8E.
    While trying to do a system restore on it the screen became empty outside the slider, and that's how it remains.

    I can switch off and restart it, will begin to start, then exactly the same thing happening.

    Plesae any ideas?

    > pressing the zero key "0" turn on the power, when you see a white bottom bar and hear a glance release the Zero key and it should start installation or reinstallation of your system

    I doubt it will work because this function is NOT implemented on Toshiba notebooks European but as I know about the series of notebook Toshiba U.S.!

    You can try to press the F8 key. An option called fix my computer should then be visible. Select it, then choose Toshiba HDD Recovery. Then a HARD drive recovery procedure must begin.

    But if it of not possible to choose this option, and then you take your recovery disk and must try to boot from it.
    If you don t have a recovery disk, and then use a CD of original installation MS windows, or you can order a new disc of recovery from here:
    https://backupmedia.Toshiba.EU/landing.aspx

    Welcome them

  • My Satellite A100 would not be put into hibernation

    Hello

    My laptop would not be in hibernation when I activate in the windows toolbar.
    When I activate the hibernation it will normally, but when the monitor takes blue and says "prepare put into hibernation" the monitor or system do not shoutdown (turn off), why?

    Is that the same for the suspend mode.

    I did a survey on my laptop and see I mode hibernation is enabled in control panel > power Setings > Hibernation

    My laptop is a Satellite A100.

    Sorry for my English.

    Thanks a lott!

    Hey Buddy,

    Sometimes, these problems of hibernation / suspension are caused by some programs that can't be closed from vista. Or your toshiba powersaver works bad, maybe some settings have been
    badly configured through that-I-know-what program or something else.

    I suggest you first: when you try to hibernate/suspend, then try pressing CTRL-ALT-DEL to see what applications are STILL running. Try closing the applications in the order of
    see when the machine will be really placed in hibernation. If this doesn´t has helped you, then try reinstalling the powersave (first uninstall correctly your system) and give a few
    What feedback happening.

    Greetz

  • Satellite L300-1AY recovery does not

    Hello

    I have a question about the recovery for a Tosihba Satellite L300-1AY with Windows Vista preinstalled.
    I wanted to grab my laptop and when I pressed F8 during startup I could choose Restore my computer.

    But after the game, I received a message-box (System Recovery Options) telling me that installed programs may not start, and the only option I had was press OK then the computer shuts down.

    I was wondering if there was any way, this can be corrected or if there is another way to get my computer back.

    Thank you
    Pascal

    Hello

    You may retrieve the laptop using the recovery DVDs that you created if all goes well before this problem happened
    Did you create recovery DVDs?

    If this isn't the case, then only the HARD drive recovery option can be used.
    For this you have to press F8 after that laptop has been powered.
    Then choose fix my computer.
    Then a new window will appear and then you could choose Toshiba Recovery.

    If this procedure does not start and you will not be able to use HARD drive recovery you need a Toshiba Recovery DVD.

    If you didn t create the recovery DVD, so you can order it here:
    https://backupmedia.Toshiba.EU/landing.aspx

  • Satellite L300 - external drive is not visible

    Me laptop Satellite L300 model short? PSLB0E with established BIOS 1.50.
    At the point of connection of the external drive via USB, the system sets the port in disk management,
    but without letter assignment. But also after the assignment to it of a letter, in the Solution Explorer is not visible.
    USB works without errors.

    Help, please

    It is not easy to help you with this. We don t know what camera do you use exactly.
    This HARD drive works perfectly on the other PC / laptop?
    Is there need of external power supply, one or two USB cables and and and...?

    Problems using other USB devices?

  • Satellite L300 - 13R PSLB0E - can not find the drivers for the wifi for Ubuntu Linux

    Hi, recently Ive instaled linux ubuntu as the OS second after preinstaled vista (my laptop: Toshiba Satellite L300-13R PSLB0E-02H00SEN), but as I can't find the drivers for wifi as the topic title says. Anyone know how and where to find them?

    Name of the wifi on vista driver is Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0

    All the best,
    Grzesiek89

    Hello

    Toshiba doesn't support Linux for this model of laptop, and you have to try find the driver somewhere on the net.
    Have you tried to search with Google?

  • Satellite L300-190 - Wireless does not work in Ubuntu 8.10

    Hello

    I recently bought this Toshiba Satellite L300-190 (PSLB8E-014008N5) of the machine.
    First of all, I tried to install Ubuntu 7.x, but which failed due to a problem of graphics card. So I try the new version of Ubuntu 8.10, everything works fine, except wireless. There is no detection wireless in there.

    I tried through the Ubuntu forum, but still no luck. Please help me if you can provide me with a good driver or can guide me as well.
    I await your response.
    Ali

    Great news. Thanks for the link.

  • Satellite Pro A30 with BIOS not fully ACPI compatible for VISTA

    I would use my beloved sitting Pro A30 to dual boot with Windows XP Home edition and Vista but having bought a 80 gig HARD drive and would divide in 2 partitions, I have now WXP SP2 running on the first partition, but try to install vista on the second I get the message: "BIOS IS NOT FULLY ACPI COMPLIANT".

    I ran the compatibility of vista online check and gave the OK and have the latest version of the bios v1.80. Do I have to buy a laptop?

    Yes. Your laptop is not supported in Vista. Sorry but there is no chance of having Vista BIOS support.

  • Windows XP Professional, Media Center Edition 2005 SP3 will not automatically put into hibernation

    I have re-installed drivers quick resume technology drivers & Intel Graphics & Sound & all associated drivers. but not good.

    Computer will be manually Hibernate & come out of hibernation, but is not automatically updated in hibernation?

    I tried the recommendations of microsoft all the but not good?

    The Device Manager shows all devices OK?

    Performed a restore the registry of oem disc & now put into hibernation very well at the moment, I hope that it will last? only lasted for a few days? its now to return again. ?

    not a fan of the system restores, especially under xp, but if it did work at one point, what has changed on your system, since it worked?

    http://support.Microsoft.com/kb/306084

    This is for two versions below, then you should be good.  But again this could be a temporary solution to a problem.

    Microsoft Windows XP Professional

    Microsoft Windows XP Home Edition

Maybe you are looking for

  • Disable the status options of calling on Samsung Galaxy S II

    Whenever I log a call with someone, it shows the status of the call directly on the screen and I'm not able to see their faces. I tried all the options and I can't turn it off. Help!

  • After the upgrade of RAM Equium A100-338 runs on battery only 30 min

    I've had my laptop Toshiba Satellite A100-338 for over 2 years now and the other day that I upgraded the RAM to 4 GB to 1 GB, I noticed that the battery level is low and I can't get to the 30-40 minutes out of the battery max. There generally has 1 h

  • cannot restart dirve CD or hard drive

    I'm working on a friend's computer, a shitty Compaq Presario CQ60, running Vista. Now the computer cannot start from the CD drive or HD. Each time, computer throws this error window "need to restart the installation. I have access to advanced and tri

  • CD/dvd inop

    CD/DVD has two parts slimtype dvd a ds8azp ata device error 10 (from Device Manager) the second part is TigerJet CD-ROM USB device.  Computer is compaq C571NR notebook computer running vista home.  I don't know what happens, rarely use the cd, but it

  • ORA-01722: invalid number calculation error during the treatment.

    My version of the APEX is Application Express 4.2.6.00.03I imported apex application 4.0.2 and his object of decision-making support in my apex.Its installed successfully.But when I try to run this application it show me this error:ORA-01722: invalid