Satellite L300-1AY recovery does not

Similar Questions

• Satellite L300 (PSLB8C-0H901X) does not work

  My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no MESSAGE, nothing, lamp power and charge Get when pluged into anything else, any known issues? All the fixes, thank you in advance for your help.

  Of course, your laptop is completely dead. In such situation, there is no magic solution and I m afraid that you need professional help. If there is absolutely no reaction is maybe defective electronic power supply and the motherboard must be exchanged.

  As you know this is part more expensive so you need to check if this is the solution for you.
  Call, explain the situation and let it check your laptop.

• Satellite L300 - 1 9 does not start safe or normal mode

  Hello

  My computer does not load to the top of the security mode or normal mode.

  Although Macafee, my virus protection software provider believe their recent problems are to blame they have offered no solution and instead asked me to load windows with my "installation disk".

  I can't find it, where to do it? (p.s. my computer is the Satellite L300 - 9 1 series.

  Thanks in advance.

  Hello

  If you are not able to start Windows try first HARD drive recovery option:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  If this does not work, you need the recovery disc you can order here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Satellite A300-1MC - recovery does not work

  I have a Satellite A300-1MC. It does not start in windows is right there with the Welcome screen. PC diagnosis indicates that the hard drive is faulty. I replaced the hard drive with a MK3276GSX Toshiba MK3252GSX - both are 320 GB.

  When I insert the recovery disc I get the following message when disk 2 is running "insert the next recovery means that contains the D:\08008XSP6 file. STORMWATER MANAGEMENT.

  Any ideas where I'm going from here? »

  Hello

  Are you sure that you Recovery disk was created correctly?
  This recovery disk function properly in the past?

  You label the discs properly?

  It seems that there is a problem with the recovery disk.

• Satellite L300-13R - WLAN does not not on Windows 7

  I am on Windows 7, it can't detect the wireless device, says I need to reinstall the driver, vista and xp driver install it as they say that they do not support my opperating system.

  I currently have to plug an ethernet cable to get internet. I use a Toshiba Satellite L300 - 13R PSLB0E.

  Please could I have help, thank you very much.
  P

  Hello!

  I think that this is not a problem. Windows 7 is only a beta OS and at the moment, the pilot decision-making is not very good.

  You might find some drivers on the site of the factory of the WLAN card. In your case, it should be Realtek.

  Good bye

• Satellite L300-1BD - output does not work VGA

  Hello.

  I have a Toshiba Satellite L300 1BD (model PSLB8E). I've been usinng the VGA output to connect to my LG tv. It worked fine until last week. All of a sudden the TV won't not reckognized by cell phone. TV says no external device is connected. I tried different things: commissioning with the TV connected and not connected via the VGA cable, by pressing the FN + F5, removing the battery and pressing on the powerbutton, verified to the last videodriver, deleted the driver existing and installed new... unfortunately without result. I also tried to plug the TV with a different VGA cable, but no result. It is not the TV because I tried to connect the laptop to a TFT monitor and it did not work as well. Tested the VGA cable with my friends laptop: it works perfectly.

  The strange thing is: if I crochet TV up the laptop, I can hear the phone makes the his "new hardware found" and turns black same laptopscreen for a second, then everything appears on the laptopscreen. If I check the graphic properties with the right click on my desktop, I see they are no set for 'clone device ". As if the laptop computer knows, something is connected, but just cannot transfer the image to the TV screen.

  The graphics card is a Mobile Intel 4 Series Express Chipset family.
  The OS is Vista Home Basic (32).

  It's a shame that the VGA output seems to be down because I watch tons of videos and movies through my laptop on the TV screen. I don't know if this could be a software or a hardware malfunction. If someone has an idea or an idea, please let me know. Thanks in advance!

  Marcin.

  Hello

  All that you have done to test the functionality of a VGA port is good, but I assume that there must be a hardware problem and I recommend you to contact the nearest Toshiba service provider.
  Of course, on this path virtual, we can only speculate what may be the problem, but it should be tested correctly. If you want to last and ultimate test Exchange HARD drive, install original OS, you got with the functionality of your laptop and test with the factory settings.

• DVD-ROM on the Satellite L300 - 144 (PSLB0E) does not

  Hi all

  I have a problem with my DVD player does not.

  When I bought the laptop 2 months ago it was working fine, after about 2 weeks the DVD player started playing some DVDs and others read do not. I decided that I was going to go down the slope from Vista to XP to support programming languages and DB management tools does not not on Vista. After formatting and XP is loading, the DVD Player did exactly the same thing. Now 2 months down the line is not read or write any DVD and not CD even if it's still the DVD playback.

  I followed the steps on the forum to remove the disc from the device and then Manager deleting Upper and Lower filters, although I couldn't find any filters lower or higher in the folder specified by the users of the forum. I restarted the machine and the pilot has been reloaded without a bit of luck. When you open the DVD drive in my computer, it's a blank screen as it would be for a compilation in writing, even if the DVD contains information on, even original movies DVD does exactly the same thing.

  I also tried to recover the installation of Vista from the recovery DVD and it is not reading the DVD.

  I looked in the manual where it says that the machine should have a readers following Panasonic UJ-870 b/UJ-870F, Hitachi GSA-T40N/GSA-T40F, Pioneer DVR-KD08TBM/DVR-KD08TBF, Samsung TS-L632H/TS-L632P or Toshiba SD-L802B. However if I go to my computer / device manager / Nero Info tool it shows all the DVD drive as drive SD-L622A. The driver info is the next Microsoft 5.1.2535.0 (2001/07/01) with firmware T070 version.

  With the Toshiba Software accompanies the drive also fails.

  Is there an updated driver that will help or updates the firmware or other solutions available to me?

  Thank you

  Hello

  you wrote

  + I also tried to recover the installation of Vista from the recovery DVD and it is not reading the DVD. +

  It tells me that your DVD player is broken. Failure of equipment.

  go to a Toshiba ASP. I think that your laptop is still under warranty.

  CU

• Why Satellite L300-10 q does not recognize wireless network

  This new laptop works well on a wired LAN but does not recognize a wireless local area network. Received the message no network found. In the same room with another PC laptop Toshiba the wireless LAN is located and has good signal strength.
  The wireless LAN switch is on and the 'antenna' pictogram led burns red.

  Seems that it is not configured for detection. No idea how to solve this problem?

  Hello

  You´re sure you checked all THE settings? I mean, if the local wired network works and the wireless is enabled, you need to check all the parameters available that could be done. One idea would be to check the L300 on another access point to make sure that the problem persists on different brands of wireless routers.

  Please check this first and make sure that your settings are all on "automatic" so if you do not find the reason, come back and we will try to find another solution.

  Welcome them

• Satellite L300-190 - Wireless does not work in Ubuntu 8.10

  Hello

  I recently bought this Toshiba Satellite L300-190 (PSLB8E-014008N5) of the machine.
  First of all, I tried to install Ubuntu 7.x, but which failed due to a problem of graphics card. So I try the new version of Ubuntu 8.10, everything works fine, except wireless. There is no detection wireless in there.

  I tried through the Ubuntu forum, but still no luck. Please help me if you can provide me with a good driver or can guide me as well.
  I await your response.
  Ali

  Great news. Thanks for the link.

• Satellite L300 - portable computer does not load

  Hello

  I just wanted to know roughly how much it should cost, or what can I do to fix my laptop. It does not load and I bought a new charger to see if it works but it started to load for a few days and then stopped working again.

  All responses will be apperciated, thank you.

  Hi DeeDee_1,

  If you have already bought a new charger and it doesn t work there seems to be a motherboard problem, but another part could be affected too

  Here he s just a user to user forum and nobody can tell you how much it would cost because a professional diagnosis is necessary. After that an authorized service provider can make you an offer on all repair costs.

  Then contact the guy and ask for help. They can give you a good answer ;)

• Satellite Pro L10 - recovery does not work

  I am currently that use the recovery cd of the product on my satellite pro L10, however when I am with regard to the selection of recover whole hard disk (option 1) then continue and then the following message appears on a black screen:

  For a drive partition error checking - please try again!
  Press a key to continue...

  When you press a key, then I get another white screen like this:

  X:\ >

  X:\ >

  I have no idea what to do about it, or even if it is indeed a problem, any help or advice would be greatly appreciated, thanks

  Hello

  Please format the HARD drive again and remove all partitions on the HARD drive.
  Several months ago, my recovery CD did not work. But after formatting HDD, I was able to perform the installation of the Toshiba Recovery CD.

• Satellite L300 - 16L - Vista does not load

  I have a L300 - 16L, and now, it will fail to start.

  When the laptop is turned on, I get two options (can not be sure of the exact text that I don't have with me at the moment):
  (1) start Windows repair
  (2) start Windows normally

  When I choose the second option, I get a blue screen and the failure error code is:
  Stop 0 x 00000024 (0 x 00190444, 0x864d22e0, 0xc0000102, 0x00000000)

  When I choose option 1, I get "the installed program cannot start. Click OK to turn off the computer.

  I downloaded and created a CD to restore Vista from the Microsoft Web site and have run
  Bootrec /fixmbr
  Bootrec /fixboot
  Neither of which solves the problem.

  If I press PF8 when starting, I get several options, including the safe boot mode. However after he was responsible for various files (of which the last is CRCDISK. (SYS), all I get is a black screen.

  Unfortunately, I did not create recovery disks, but no doubt I could select Toshiba HDD Recovery option that appears in the options when I press PF8 during startup.
  However, I think I'll have to copy all my existing data first as this option will wipe away on my hard drive (I guess that I'll be able to copy the data using the Vista recovery CD because it allows me to open a command prompt window).

  Someone at - it other ideas on how to solve this problem before going in the way of HARD drive recovery?

  Thank you
  H

  To be honest, I have to laugh after reading your posts.
  I wonder what you do with your laptop. You must be the expert to ruin good operating system.

  So, if you didn t created a recovery media and if you don't have option to fix my computer when you start advanced boot options (F8) you can't do anything. Just nothing. HDD recovery is useless because without repair my computer option cannot start the recovery procedure.

  What you can do is to install your own Vista or order the original Toshiba recovery media for your laptop model.
  Do you know how to do this?

• Satellite L655-149: recovery does not work with the new HARD drive

  Satellite L655-149

  PSK1JE

  Windows 7 Home Premium 64-bit (factory installed)

  Recovery of HARD drive on drive D (factory installed)

  My old toshiba (MK5065GSX) 500 GB hard drive became too noisy and slow so I plan to replace it with the new drive hard toshiba (MK5059GSXP) 500 GB.

  I created USB Flash HARD drive recovery.
  When the installation is complete and Setup installs devices an error "Windows Setup couldn't configure windows to run on a hardware on this computer.

  I've updated the bios
  I loaded by default in the bios
  I changed the SATA AHCI mode to compatibility IDLE

  assistance in this regard will be highly appreciated

  Set the BIOS to the default settings and try again.

  With the installation of recovery, there is a problem: either it works or not. If this isn't the case, bad luck and the only solution for you is to order original Toshiba recovery DVD on https://backupmedia.toshiba.eu/landing.aspx

  By the way: do you use that stick of recovery for the first time?

• Hot satellite L300 - function key does not work

  After the superb help I got from Jimi, I hope I can solve my problem last, I changed my OS from Vista to Windows XP Home edition and I managed to get all the drivers working even if some on the site of Toshiba don t work like Wi - Fi, I managed to acquire other places. Alone, I can't get to work is the shortcut keys, it says TOSHIBA COMMON MODULE NOT FOUND! Everything else works OK after using Nlite (cracking bit of Kit)

  My laptop is Sat L300 - 1AQ model PSLB8E-OOKOO

  Thanks a lot for your help

  Then, visit the Toshiba download page and check for common Modules. There is version 1.00.05. Download and install it.

• Satellite L300: FN F8 does not work to activate Bluetooth

  Thanks for your reply and sorry if I speak very well English.
  I bought 3 Toshiba L300 PSLBGE and after installing Vista, I tried to install the battery blueetoth.
  After a few minutes, the installation program ask for me to plug in the unit (it is built) and to do this I press Fn + F8 but it doesn't work.
  I'm sure that there is a built-in bluetooth device because it has the logo on the box (and also on the bottom of notebook).
  What can I do? Thank you.

  Hello

  Make another function of FN keys?
  Have you installed all necessary drivers that would allow the FN button functionality?
  Installation of battery BT over properly?

  Why you do not use the Toshiba preinsatlled OS?