Satellite L300 - connection broadband using USB Modem Orange

Similar Questions

• Satellite L300 - 1 year PSLBGE - device Modem problem

  Hey

  I try me set up my dial-up access, so I can use internet at home...
  It is said that any modem devices are
  but in the previous copy of windows that I had... everything was fine.
  would u please help me solve this problem?

  Portable computer system unit Toshiba satellite L300 1 year
  Model No.: PSLBGE-002004AR
  OS: Windows XP
  Note: I went on the site of toshiba drivers and I downloaded 3 files of modems here to try to update the modem driver
  but nothing helps and the problem persists
  Thanks for reading
  Your
  ~ Nour

  I guess that you have activated the Device Manager and there is no yellow exclamation point isn't good?
  Figure modem in the list?
  It should be!

  How have you tried to configure the dial-up access?
  You should do this;
  Go to the category modems Options - Control Panel - hardware and sound - and.
  In the local info window, select an area code; for example, 0.
  Then click the Modems tab, click Add.
  If a User Account Control warning window appears, click on continue, and then click Next.
  Now Windows Vista should attempt to detect the modem.
  When the modem installation is complete, click Finish.

  Then the new modem installed should appear. Click OK to close the Options of Modem and telephony.
  Now, your modem is installed correctly, and you must now create a modem connection.

• Satellite L300 - how to use and install Bluetooth?

  Hello world.

  I would like to know how can use bluetooth and how to install it on my:
  Satellite L300-204 SYSTEM UNIT
  model No.: PSLB8E - 06100ES4

  It is necessary to transfer pictures from my samsung mobile phone

  TKS a lot.
  Kind regards.

  Ornella

  Hello

  This model of laptop doesn't support BT (bluetooth).
  There is no BT module and so you will not be able to activate and to connect a mobile phone using the BT connection.

  The fastest solution would be if external use BT USB dongle.
  This dongle is not expensive!

• Satellite L300 install driver for USB 2.0 adapter - does that mean?

  Hi all

  I have a Satellite L300 and the wireless works without any problems (except intermittent breaks in connectivity not experienced by other users of the netwrok). When I logged in this morning, I immediately get the following message:

  Windos needs to install the software driver of USB2.0 WLAN adapter

  I don't have a USB adapter, but the Realtek one standard. I tried to reinstall the Realtek driver nothing works. When I click on search and install the driver software, the system continues to search for hours without stopping.

  Wireless networks are not accessible; the device does not work correctly.

  Anyone know what is happening?

  See you soon

  Anders

  Hello

  He s strange because it sounds like you would use a WLan external stick.
  But you use internal WLan card right?

  I m not very well what s wrong, but it is worth to install the WLan driver.

  First, you need to go to Device Manager and should remove the network card from Device Manager wireless, you will find it in the network controllers.
  Then, you must restart the device.

  After the reboot, Windows will ask the Wlan driver you should visit the page of the Toshiba driver and need to download the latest driver and then reinstall it.

• Re: Satellite L300 connects to 802. 11 g, but not the 802. 11B wireless

  I'm trying to connect my new wifes computer laptop Satellite L300 my 802. 11 b wifi (WEP-active).
  It fortunately detects and connects to my network 802.11 g of neighbors, but could not find my 802. 11B.
  Other portable fortunately find and connect to my router.

  OS - Windows Vista

  Any help would be appreciated.

  Hello

  Did you choose the standard 802.11 b in the WLan card properties?
  Check this box...

  You can reach these settings go to Device Manager-> properties-> Advanced tab WLan card!

  Here, you have to choose (enable) then 802.11 b
  Please check also if the router and the wireless network adapter using the same channel!

• Error message when connecting with wireless USB modem

  Dear Sir/Madam,

  I use the HP laptop with Windows vista operating system. I'm also using the USB wireless modem. But now, I had problem connecting with usb modem. I get ((erreur (6): could not get the string) message connecting with.) Kindly help me to solve the problem.

  Thank you
  Kind regards
  D.Yokesh

  Hi D.Yokesh,

  1. did you of recent changes on the system?

  If it is a recent issue, then you can try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Can satellite L300-1AQ - I use the L300D recovery disk?

  My son has a Satellite L300-1AQ equipped of vista. All of a sudden will load is more the laptop and automatic repair options fails too. There is a blue screen that appears, but only for a second when I try the repair option - then the laptop stops. We have no recovery disks.

  Also, I have a laptop Satellite L300D-13 s that works well and suppose I could get a drive recovery- but prob diff drivers etc.

  Can someone advise me how best to my sons laptop (Im not concerned about retrieving data as all saved already), but do not want to return to the factory settings including Vista. Do not know if using a laptop recovery disk is an option - instinctively is not as ever as simple as that.

  All advice welcome please.

  Hi mate,

  I can t imagine that the Satellite L300D recovery disc will work on Satellite L300. The hardware platform is different, because a single machine is equipped with Intel CPU and the other with AMD processor, so there's a big difference.

  In addition, in the worst case, it could be a hardware problem and in this case the recovery disk does not work

  What can you do now? I think you have to options: either you install Vista from a disk of Microsoft or order you a Toshiba Recovery disk: https://backupmedia.toshiba.eu/landing.aspx

  After installing the Microsoft disc, you can download all the drivers on the Toshiba site. Then you will also get back to factory settings, but it takes more time in the recovery disk because it contains an image which already all the drivers and tools are included/installed.

  I hope I could help a bit. :)

• Satellite L300 - how to use the webcam?

  This is a stupid situation:

  -My girlfriend use a Toshiba Satellite L300 laptop.
  -When Skype-ing with me, she changed out somehow built in camera
  -J' I try to help him, but I can't find the key combination in the user manual...

  PLEASE, I BEG YOU! Help!

  Hello!

  You should ask your girlfriend how she did that. This makes it easier. ;)

  In addition, it would be interesting to know if the webcam is listed correctly in the Manager of the Age. You can check this?
  Maybe reinstall Skype and webcam driver could be useful.

  Good bye

• Toshiba Satellite Pro M30 cannot use USB 2.0

  I can't use USB 2.0 on my laptop (OS = Windows 2000).
  Where can I download this driver-USD for this Board (Toshiba laptop motherboard).

  Greetings

  Hello

  Have you seen yellow errors such as exclamation points in Device Manager?
  If not, in this case it of not necessary to install all the drivers.
  Moreover, the operating system automatically recognizes the USB ports.

  But what USB device doesn't work? As far as I know if this external device needs more energy than the 500mA so it is possible that the operating system can not recognize this device.
  In this case you need an external power supply for this part or you try to use the USB hub.

  Good bye

• The router configuration E3200 using USB Modem (wireless) to connect to internet

  How to configure a router E3200 using a USB wireless modem to connect to internet? It's my only choice, I don't have a wired connection and I do not have telephone wires and there is no authority to act differently. PLEASE I NEED IMMEDIATE HELP. I WAS TOLD THAT I COULD DO THAT!

  The only option is to use a computer to connect to the internet and then see the E3200 as access point and switch.

  See http://homecommunity.cisco.com/t5/Wireless-Routers/ICS-on-WRT54G-please-please-please-help/td-p/1184...

• Satellite L300 - connects to Netgear N200 but no web?

  Hello

  I have a NB L300/BCI about 2 years. I just got a new wireless modem under a new package of the Internet. Laptop connects fine to other networks/modems, but not this one for some reason any. Internet guys think I need a new driver update.

  Any thoughts on what I need and links as to where I can get this? Thank you!

  Hello

  > Laptop connects fine to other networks/modems, but not this one
  So for me the case is clear, and the problem is not the laptop, it s the new router. I mean why you need to upgrade something if you can connect to other networks?

  Can you connect to the router via an Ethernet cable? If so, you can try an update of the firmware on the router and check if the router already has an Internet connection.
  Perhaps WIFI should be enabled on new router until you can use it. Also, check the WLAN configuration and disable filtering of MAC addresses.

• Satellite L300 - 17L - need driver for modem on high definition audio device

  How can I get or where can I get the modem on high definition audio bus device.
  I look everywhere but I find t and what to use for?
  Please some body to answer me because I'm a beginner.

  PS Sorry for my English is bad

  Do you need a XP driver?
  Have you tried to install the audio driver and modem driver?
  If this is not the case, this!

  The European driver Toshiba page provides all necessary XP and Vista drivers for this laptop. As you know the Sat L300 - 17L belongs to the PSLBCE series and you must choose this series in the form of driver download.

  Please note; There are three different modem drivers. Check them all!

• Since another laptop Toshiba Satellite L300 - can I use Recovery CD?

  Hello

  I can't get a computer to load Vista (Equium l300 (I think).
  Ubuntu loads very well (I have a linux partition 8 GB, with GRUB installed in a separate partition), but when I try to load vista I get "to go". "and nothing happens.

  I tried HDDRecovery by pressing '0' or 'F8', but this gave me a check disk for errors and nothing more.
  I always have a backup of HARD drive recovery in another partition, but I know not where to place them, can you tell me where?

  Then I discovered that I have a wife satellite toshiba recovery disc.

  I can use it to recover the satellite or it will remove a real installation of Vista, put a 'pirate' new copy in its place?
  If I can't do that, can someone tell me where to place the folder HDDRecovery image?

  In General, Toshiba create materials recovery and images of recovery for each laptop model separately.
  Each laptop model has different hardware and recovery images are not the same.
  Before the start of recovery it will be checked if the recovery image belongs to some portable computers. If the identification is not just installation of recovery is interrupted.

  One last thing. If you have changed the structure of the partitions or installed some other OS, you will not be able to use the recovery saved on the HARD disk image.
  It is bad enough that you have ignored the reminder of recovery with clear instructions on creating recovery DVDs.

  Here is the original post:
  Important INFORMATION

  your system is equipped with a hard drive recovery system. If you need to repair
  your computer in the restaurant to original factory State, you can do it directly
  hard disk (press F8 when you start your computer, choose "Repair your computer"
  and follow the instructions in the menu) or create a media drive bootable recovery for this purpose.

  Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator"
  to ensure that you are able to restore your computer to the original factory, installed state
  even if your computer is seriously damaged.

• Satellite L300 - Vista - Touchpad and USB mouse does not.

  Hello

  Well well after hours of trying allsorts, I post here...

  Been given the laptop for repair as the touchpad no longer. No problem "I thought", simply plug a mouse usb to help me get around and re - install the touchpad... what a joke.

  On the right, the USB mouse is recognized as a hid device and work, according to the Manager of devices, but not when you move it... nothing...
  The Touchpad is listed as a Synaptics ps/2 touchpad and signals a Code 10 in section mouse device as well as listed as a hid and fully functional usb mouse Manager.

  Right... I have...
  Listed all devices, even the hidden nonpresent (devmgr_show_nonpresent_devices) and removed everything only account of any mouse, keyboards, etc...
  uninstalled the software synaptics via the program Panel.
  Restarted the laptop, and it starts with the touchpad is ranked again code 10 with the version of windows drivers.
  Drivers up to date using two different files of Toshiba for the touchpad, still Code 10
  Still, the USB mouse does not either.

  Someone enlighten me please on a fix for this...

  Hello

  Really strange what s my friend because normally a touchpad driver update should solve the problem.

  In any case, have you ever tried to use the Toshiba Recovery disk? Maybe it s just a software problem and a few important Windows files are destroyed or don t work properly. Reinstall Windows using the recovery disk Toshiba takes only a few minutes and there are already all the drivers and tools integrated. With these parameters (factory settings), the touchpad should work properly, and if not the touchpad or the motherboard needs to be replaced maybe.

  Good bye

• Satellite L300: How to use a partition of data for my documents

  Hello

  the Sat L300 160 GB hard drive is partitioned into vista and data.
  I want to save a large number of photos in my documents, which is on the part of vista.
  This example uses only half of the road.

  How to use the data for my documents component? TIA

  Hello

  You can make a folder on the second partition, and can store the necessary files (documents, photos) in specific files.

  Or maybe you want to decrease the Vista partition?