Satellite L300: Supervisor password problem

Similar Questions

• Satellite A100-206 supervisor password problem

  Hello

  We have a Satellite A100-206 at the office.

  A colleague trying to protect the laptop set the user password in the bios.
  I do not exactly know what she does but at startup is asked for a password.

  Then she ask me to remove the password so I typed the password, management of the bios and clear the user password.
  But it is, I also noticed that the supervisor password was already defined but not selectable (gray color).

  In any case, I've saved and restart.
  The problem is that now the OS start without asking for a password, but I can't enter the bios because it asks for a password and is not that of the colleague don't forget to have it fixed.

  Why can't I get more into the bios of th as a user?
  I also find the hwsetup in windows re set the password of the user as shown in the manual, but this software is not present.

  Best regards
  Diego

  Hello

  I put t know which operating system you have, but I think that Akuma is right. If you start HWsetup you can also access the BIOS using this tool and remove or set a supervisor password.

  You can remove the password in HWsetup?

• Satellite L300-1AQ - password utility and the Firmware installation problem

  Hello

  I recently reinstalled Vista after the first crash, then installation of linux.
  Now I installed most of the services Toshiba back packages on my laptop Sat L300-1AQ but firmware and password utilities are not installing back.

  Watch firmware available target error message is not available.
  Utility password displays the serial number is not correct.
  do not understand why these error messages come and how I can deal with that.

  Thank you

  Year s

  Hello

  Firmware update should only be done if you notice problems with the ODD (CD/DVD drive)
  In addition the laptop was equipped with various drives and firmware on the Toshiba page seems to be designed only for some some sides.
  So if the laptop uses other ODD then the update of the firmware would not be supported.
  See more information on the driver page for some details on the update firmware and what are the chances are supported!

  I m not very well why the t supervisor password utility could not be installed, but I think that the message: bad series appears that if you tried to install a tool that was not designed for this model of laptop or the operating system.

  The L300-1AQ seems to belong to the series PSLB8E and you must ensure that you have chosen the right model on the driver page.

  PS: don't forget that the VAP has been installed everything first!

• Satellite L300 - boring loading problems

  Hello world.

  I've got my Satellite L300 nice for about 23 months now, and I absolutely love it.
  There is just one problem: my PC is not loading properly. There are always about a 1/50
  lucky, I have to play with the inputs and output for all 5-10 minutes each
  I plug it in time. I had this problem before (about two months ago) where I sent it
  Back to the store and they fixed. I was able to pick up there is still almost a month
  and everything worked properly again.

  It's really, really frustrating and I hope there is a solution simple sorta.
  Anyone who is familiar with this problem and to know what exactly is the problem?

  Thank you in advance.

  This kind of technical problems, there is no simple solution.
  If you have a serious issue with load problem, it is probably related to electronic power supply and it must be checked by authorized personnel only.

  Tell me but honestly: what can you fix these problems?

• L70-B-126 Toshiba supervisor password problem

  Hi, I have a problem.

  My son has set a supervisor password and forget it. How can I fix the problem and restart the BIOS do not the remove battery?

  Thanks for help.

  Any can help me pls?

• Satellite L300 BIOS update problem: "what BIOS is not for your laptop.

  I obtained through Satellite L300 laptop and I want to update its BIOS (current v1.50), so I downloaded the bios update v1.60 - WIN and when I run the extracted PS10160M.exe file - I get a message that "this BIOS is not for your laptop.

  What I am, I am doing wrong?

  PS: that updating the BIOS was suggested automatically after registration on the Web from Toshiba site via the serial number.

  UPD: it looks like autosuggestion fail: manual search shows that bios update 1, 60-win is not suitable for the model Satellite L300 PSLBCE. :-(

  Hello

  You used the wrong BIOS!

  The European driver Toshiba page provides a BIOS for this Satellite L300 PSLBCE series and the latest BIOS right now is 1.50!

  Currently, your laptop uses the latest version of the BIOS.

• Re: Cannot retrieve Satellite L300-1AS - hardware problem?

  Dear Sir

  My laptop had been hanged for last week while he was working, whether caused by a blurry screen or a power failure. The adapter has been replaced I thought it might come from the power outlet. But the socket finer, when the laptop was opened.

  Due to no such problems have been has spent in safe mode, I tried to re install the OS from the original recovery disk. However, the system couldn t reach nothing more the OS 3/6 file decompression.
  But he was able to browse the web page to ubundu from the trial (no installation), but again got stuck within minutes.
  A technician told me it s with card memory; I replaced it, but didn t work.

  Now, another person after that one day the review concluded that, being the screen GET blurred it's a fault with graphics cards and buy only comes around 150 euros.

  So it would be grateful if any of you can find the correct solution, where I think if repairs cost more than more than 200 euros better off buying a new.

  > So it would be grateful if any of you can find the correct solution, where I think if the repair will cost more than more than 200 euros better off buying a new.

  I think it is s hardware related problem, but I can't say with certainty what part is malfunctioning.
  It may be a motherboard problem and in this case the motherboard needs to be replaced

  Motherboards are more expensive pieces of mobile phones I think you can get a new motherboard for 300-350 you should consider the cost of such replacement and in most cases it's better to buy a new laptop to replace this part.

• Satellite L300 - forgotten password

  How can I get on my phone if I forgot the password someone could help would be grateful

  Post edited by: carlturner145

  Hey,.

  What password do you mean exactly?

  As Akuma wrote there are different passwords like Windows, BIOS, etc.
  If you mean the BIOS password, this can only be removed from an authorized service provider. The Windows password you remove if you reinstall Windows.

• No audio device installed Satellite L300-28R (PSLB8E-12T018GR)

  Hello

  My English isn't the best, unfortunately. Maybe someone can help me.

  The following problem:

  A Satellite L300 ran without problems until now with windows 7 (32 bit). I had then increased PC speakers of this came of trust with a USB flash drive that will serve as an audio interface for mailboxes. He has been infected by the first recognized by Win7, installed, and I could use Ihne. But then the sound card integrated (Realtek HD Audio) is disabled. Now, when I remove the USB audio interface I have no more sound. There is a lack of complete the "Realtek HD Audio" entry in the audio control.

  In the Device Manager is not an entry ' Audio, video and game controllers' also appear longer. The interesting thing about the HD audio driver, but he is always installed correctly. It is found but no entry for more video, audio, game controllers, and if I was in the toolbar the look of speakers just click on it a red cross when he get up "no audio output device installed."

  On this, I tried to uninstall the system USB audio drivers (no problem) has restarted. Not always the same sound problem.

  That's why I completely uninstalled all drivers audio and tried Windows 7 default drivers. The same problem. I uninstalled the audio drivers, this time I tried the drivers Toshiba, same problem.

  Fact is I can remove all the drivers, reinstall, which happens without problem and the error message, then it is same because "drivers have been installed, the machine can be used now" I click on what there is also my drine Realtek HD Audio. But then I opened the Soundsteurung he wrote me, "No audio device installed" it's almost as if the onboard sound has been disabled in the BIOS, but unfortunately there is no entry exists, since the BIOS is usually something to bend parameters.

  I have integrated sound card in my vemutung the BIOS from a USB audio interface is disabled, I would now like to 'hidden' bios unlock options and manually activate the sound again. Unfortunately, I do not know how do I unlock the BIOS.

  Is there anything else maybe ideas, suggestions or solutions? Have already the system is set up with new same problem, the drivers are installed, the device is detected and marked as ready, but not input in the audio control and no entry in the Manager of devices for "audio, video and game controllers".

  Once had a similar problem with my desktop where I could pass without any problem, but the onboard sound in the BIOS again, unfortunately, what with the Toshiba BIOS Lite is not the case.

  Hope someone can help me here, slowly I won't now, so that a new installation was not, I see the problem with the BIOS setting.

  Answers in German would be nice

  Greetings and thanks
  yunyx

  Hi mate

  To be honest I'm not quite sure what the problem might be m.
  Your ad is also a bit confusing.

  First of all, the BIOS is not similar to the BIOS that you can find on desktop PC and as far as I know there is no special option to enable or disable the sound card.

  So I think that in your case, it s BIOS not deliver.
  I think that its Windows operating system that makes some disorders who knows maybe the registry is confused up similar facts is that you should see some yellow exclamation points in device if Manager driver would be absent or you should see an unknown device in the devices list

  The latest Realtek audio driver could be downloaded directly from the Realtek page, but even if the Realtek audio driver is not installed Win7 standard driver should recognize the sound chip and sound must be detected during the operating system installation.

  I think you should try to install a driver from Realtek but if this won't help you, then you should try a new installation of the OS. Get it back you would help define the laptop back to factory settings and I think it's the fastest solution in your case

• Satellite L300 - cannot install Bluetooth mouse

  I am trying to install a mouse N554 bluetooth on my laptop satellite L300 model, having problems someone help?

  Hello

  What about by Satellite L300 you exactly or let's you have built in Bluetooth module?

  I have too many Satellite L300 and there s not equipped with Bluetooth so I guess you don t have a Bluetooth module.
  Check this box!

  Good bye

• Satellite Pro S300 - how to enter the supervisor password?

  Hello

  I have a laptop Toshiba Satellite Pro S300-11 years and have a problem. One day, I decided that wanted to put a password for the supervisor to the bios of the laptop. Now, I remember this password, but when I have access to the BIOS Setup, I can't watch any o change option disable this password. I can't enter this password to set me a supervisor, and also I can't change some options with respect to the example, the boot sequence.

  How can I remove this password or how do I log in as a supervisor? I see no option for this, and I need to change the boot sequence.

  A big thank you.

  Hello

  On this that I can only say, check your user manual! ;)

  There, I created the following information:
  + C:\Program Files\Toshiba\PassowrdUtility\TOSPU.exe+
  + This utility allows you to do the following: +.
  + Register, remove, or change the supervisor password.
  + Create or cancel a supervisor password token +.

  Check this and then you should be able to remove the password if you know the current.

  Welcome them

• Satellite Pro A200 - Supervisor Password Setup Utility fails

  Hello

  I own a Satellite Pro A200-PSAE7E and a license to retail for Windows Vista Ultimate 32-bit Edition (with SP1) is installed.

  Before installing Vista, I have updated the BIOS to the latest version available on the Toshiba site (http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT).
  BIOS version is now 2.20 - WIN32

  After the installation of the operating system, I started to install different drivers and utilities to download them from the Toshiba site.

  When I try to install the "utility supervisor password" Setup fails with a box of message that says "serial number is not valid.
  Same problem with a different Installer: "utility of Support Flash Cards.

  Someone knows how to solve this problem and what serial number is not valid?

  Thanks in advance,

  mme000

  Hello Hana

  If someone has to take care of the warning, it's Microsoft. They offer something new and they know with certainty that he could have different negative influence on the operating system running well.

  Toshiba may just try to react and change has tools and utilities, but it's not easy. you will see that soon or later Toshiba will offer updates for all non-working stuff. The same is with WXP SP2.

  By the way: interesting Toshiba on Vista SP1 - http://aps2.toshiba-tro.de/kb0/TSB84026M0000R01.htm article

  Good bye

• Satellite L300 - 20 d - how to disable the saved password HDD?

  Hi all

  its my first time here, so be easy with me.
  I have a Toshiba Satellite L300 - 20 d. It came with vista installed plant. Anyway... about 3 months later, I switched to Win7. No prob. everything goes is good as a single password.

  About 2 weeks ago, I was looking at screen F12... after the release, on the day later a blue box appears asking you my current password "" then windows started... then went to my logon screen where I had to put my new password.

  This isn't really a (massive prob), I can remove the second password... but he would like as it was.

  I also been authorized for weeks that is to say: 1 single password after the victory of starts in place.

  Any help would be great.

  Hi all
  just thought that i' of you know I managed to unravel the problem:-at the start I press F12, # and entered the bios screen? Security tab hit, disk configuration suddenly hard - password enter. Then asked me to enter current password, I used my only current, was then asked to enter the new password I re -.
  even than the typed again. I was then asked to confirm password... .i just hit the (esc) key, then exit. the next time he disappeared to allow only enter col-
  When Word (invited to confirm) thank you. # on a certain system of what could be a / or a combination of (keys)... on my (xp, pro) compaq it was F2, so please check in the manual
  or operating system settings.

  Post edited by: mark7

• Satellite A200 - 1 M 8: Bios Update 2.20 - the supervisor password has changed

  Hello!

  Satellite A200 - 1 M 8. Update the BIOS changed the supervisor password. Has been bb_aa_yy.
  If I can set this password has become?
  Details: Updated from Vista to Vista SP1. After that the hardware configuration utility does not work.

  Latest versions of the hardware configuration utility, supervisor password and some other are not installed.

  The usual message - the serial number is not valid.

  Hello

  Maybe the problem has something to do with hardware utilitly. So it doesn´t doing is even better when the error message "is the serial number invalid.", but it could be the solution to this problem.

  I suggest you to check these discussions which might help you:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31711&TSTART=0

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=100197

  If this works, you should be able to install the utiltly equipment and solve your problems...

  Welcome them

• Satellite L300: How to remove the HARD drive password

  Hello world. I have a problem with my Satellite L300. I put a password on the HARD drive and now I want to remove it, but it doesn't let me,
  So any ideas on how to completely remove the prompt to "enter the password for HARD drive built-in user" would be very appreciated.

  Thank you very much
  Martin

  Hello

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=56069

  The user wrote:
  + It's usually cycle which starts when you press or to start to change this option. +.
  + Once, I found that I was out. +

  Hope this is the info that you need to remove the HARD drive password...