Satellite L300D not start

Similar Questions

• My C50-A-1DV Satellite will not start

  Hello

  Yesterday my C50 Satellite would not start. When turned on, it shows the Toshiba logo and then the little circles just keep them.

  I booted into recovery mode and ran chkdsk, but there are no errors on the disc.

  When I restarted, then she says the following:

  Preparation auto repair
  Diagnose your PC
  Check disk for errors
  Auto repair attempt

  Then at the stge small circles just continue.

  I started in safe mode and activated the boot record.

  Attached is the NTBTLOG file

  Thank you very much

  BigD

  Turning off the laptop
  Then press the power button and immediately after that, press the F12 button
  Then you should see a screen similar to this one:

  

  Then I recommend you to choose the option to drive HARD recovery... The last option in this menu.
  This would start the HDD recovery procedure and would restore the laptop back to factory settings...

  More details here:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

• NB10 satellite will not start

  I was watching a movie on my USB with my Toshiba Satellite NB10, when all of a sudden my screen went white,
  I pressed the Start button & it showed onscreen Toshiba but would not start.

  What is the problem, I need help.

  Thank you!

  You are able to access the BIOS?

  First of all hold them down the power button 5-10 sec to turn off the laptop.
  Then press the button again, then F2 button to access the BIOS.

  If possible, please check if the HARD drive is on the first page of the BIOS... it must be demonstrated with some details like drive HARD size / name...

  Your comments would be appreciated.

• A5383 S55D satellite will not start without power

  Hello!

  I have the Toshiba Satellite S55D A5383 laptop and I have a problem with the battery, I think.
  Laptop does not start without power. What is happening since last week.
  In fact, since April 2015 battery does not last as it did when I bought (may 2014).
  I have'nt registered the product and I think I'm out of warranty.

  So, what can I do to fix this?

  You'll probably just get a new battery which is what I did. Try Amazon.

• Satellite L450D not start - think usb device is connected

  Hello. I have a portable satellite L450D running Windows 7, which will not start. It gets to the loading of the windows with the windows logo page, but it will not go beyond this point.

  I tried repairing the system, and that tells me that a device is always connected to the laptop. I think it's maybe my phone, I had connected by usb last week. The usb cable is removed physically but the laptop obviously thinks that it is still connected.

  I'm passed through different service options - system repair, System Restore, restore the last good config, boot into safe mode but nothing seems to work.

  Ive tried to connect the phone while the laptop is trying to start and then disconnect it but still no luck. The laptop still think that the phone is connected.

  Ive not tridd remove the battery from the laptop, as it's apparently quite difficult.

  Any ideas anyone? Thanks in advance

  Hello

  I would recommend you check the boot order in the BIOS.
  Go to the BIOS by pressing F2 by turning on the device.
  Now, press F9 to get the default settings and save the changes press F10.
  Also check if you can disable the legacy USB if it s is not available, ignore this tip.
  Now, restart the laptop and test if it would boot from the HARD drive.

• Re: My L50-A-1 Satellite will not start

  Hello world

  I have a C50-A-1 Satellite and it won't start. I used my computer at work this morning on the farm and I realized that I forgot my food at home. My laptop just Runic off battery and off of himself.

  I came home, put the power supply and no lights are on my laptop won't start. I can't remove the battery on this laptop, so I can't check if it works only with the power supply...

  Any suggestion?
  Thank you very much

  Hello

  I recommend to use the reset (small hole) button located at the bottom of the unit.
  Usually, in the case of PC freezes, do not start or has a power failure, you can stop it by pressing the power button for 10 seconds (force shutdown).

  Here's the full description:
  [The stop switch of strength (hole) for models with one main battery fixed | http://aps2.toshiba-tro.de/kb0/TSB3C03JR0000R01.htm]

  Feedback would be greatly appreciated.

• Re: My laptop Satellite will not start

  Hello
  s Satellite series a of 4 years.
  does not start when turned on, the fans run, but wont even get to the POST.
  any ideas? HARD or Mo disk failure?

  I'm afraid of THAT BIOS is damaged.
  Did you do something last days that may be responsible for this?

• 4070CDT satellite will not start up - BSOD appears

  I have an old Toshiba Satellite 4070CDT.
  After you have filled the password and of meadows, enter only a blue screen is visible, and nothing else works.
  Start in "Safe Mode" is not an option, it will also not work.

  Anyone have an idea what is wrong?

  Hello

  The Toshiba start screen appears and makes the laptop going on this?
  If this isn't the case, then there could be something wrong with the hardware.
  It seems that if your device fails to its POST (Power On Self Test).
  In this case, the service agent must check the machine.

  But first, you should check if the alternative is possible.
  You plug in external devices to your laptop? If so, I would recommend disconnecting every 3rd external device.
  If the laptop does not start successfully, try to recover with the recovery CD Toshiba delivered.

• Windows Pro L10 satellite did not start successfully

  I have a satellite pro L10 at home which was working fine yesterday.
  However, I'm going to turn in today and after the toshiba screen comes up I get a message on the screen saying "We apologize for the inconvinience, but windows did not start successfully" it gives then options such as safe mode, safe mode with network, last known configuration and start windows normally.

  No matter what is selected, I get the loading windows screen but then it goes black and nothing happens.
  Is there something I can do manually which will remedy this because stupidly

  I have recent work here that has not yet been saved!
  Thanks in advance

  Hello

  In my opinion, there is nothing to do because the operating system cannot start, even in SafeMode with network, last known configuration, etc.
  You need to reinstall the operating system

  If you want to backup the data on the HARD disk, you will need to access the HARD disk
  You can create a bootable CD WinPE which help you to gain access to the HARD drive

  Download WinPE image (use google) and create the bootable CD. You will need to burn the image to CD in order to get a bootable CD.
  Can boot from this CD, backup the data on the external HARD disk and then reinstall windows

• My Satellite will not start after installing Vista updates

  My Toshiba satellite laptop does not start after the installation of updates. I get the Toshiba screen, then a screen that gives me two options. Start windows normally or repair windows. I tried both but you just Tousez in circles to the same screen.

  I didn't have any rescue CD or save a Vista CD with my computer

  Can someone help me. Do you have ideas how to run again.

  Thank you very much
  Christine

  Hello Christine

  Can you please tell us which laptop model you have?
  Did you start your laptop with F8?
  What happens when you click Repair option?

  Please give us more information.

• C55 satellite will not start

  Hello

  I have a Satellite C55 and it does not start until it makes a noise the fan start and stop.

  I tried to take the battery and the power cable holding down the power button for 20 sec.

  without the .de battery low f2 and tried now press f8 but nothing works

  any ideas?

  @drnaushadalam

  In case of hardware problems laptop, please get in touch with Toshiba authorized service provider in your country:

  Here is the page that provides your information on all available worldwide FSA
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

  But before you contact the ASP check of workaround:

  • Disconnect the power adapter
  • Remove the battery
  • Power button press and hold 30-40 long s
  • Then insert the battery and reconnect the AC adapter.
  • Press the power button

• M - series of satellites does not start successfully

  Hello

  I have the following problem: all of a sudden (don't know why, nothing has changed) portable Satellite shows black white screen with all the following:

  (Sorry, translated from German):

  Windows does not started correctly... due to software or hardware change... If the error was due to stop pls choose last functional configuration...

  But this does not, as all the other options (windows boot as normal starting point, in safe mode... has failed.

  No idea what happenend!

  Problem:

  Actually moved to another country and you have forgotten or lost the recovery CD! already contacted Toshiba for the nine, but perhaps when even someone can help?

  If all goes well it s not a malfunction of the equipment.
  In any case, in the first stage, you should try to reinstall the OS to see if this problem is software or hardware related.

• C50-A0113 satellite does not start in windows

  Hello.

  I have a toshiba satellite laptop C50-A0113 8 64-bit windows running.

  Ive had exactly two years a few days ago I restarted and then when it starts up, it stops at the screen "Toshiba leading innovation" and then he said: scanning and repair drive C, while on this screen it starts the process and then stops at 34%.

  It was two days ago now it just gets stuck on the "screen toshiba innovation leader" and then after a few minutes, it says preparation auto repair.

  Then he leaves the screen and goes to a screen black for a few minutes then flashes the blue screen written "your computer has encountered a problem" then restarts.

  I tried to create a bootable windows disc 8 in order to repair, but it does not start even in the usb port.
  I restart and press f12 to select the media to begin. It checks the media goes to the toshiba screen, then everything goes black for a few minutes until what it restarts.

  Can I please know what is the problem and how can I possibly fix it because the problem is clearly not my hard drive.

  I have removed and put into another laptop and it was fine

  Hello

  If you want to start Notepad using external media (such as a CD or USB flash memory key) you must disable the secure in the BIOS boot option.

  If you want to install Win 7, you must also pass the CSM mode UEFI Boot Mode.

  For me it of not quite clear if you created the recovery media (flash memory stick or disk)

  If you created one in the past, you could use this recovery media to put the laptop back to factory settings.

  In the case where this is not possible, some of the material (perhaps HDD) could be affected.

• C870-19(r) satellite does not start with the new SSD

  Hello

  I will update the Toshiba Satellite C870 19(r) with a Pro 840 Samsung SSD, but it does not start.

  He said: not found system.

  Post edited by: joch333n

  None found system means that there is no system installed on the SSD drive...

  What you trying to do?
  You start from a disk in order to install the new system?

  In this case, you should disable startup secure in the BIOS.
  I also recommend moving from UEFI mode MSC!

• L50 satellite will not start up - request password HARD drive

  Hello

  I hope someone can help me

  I have a laptop Toshiba Satellite L50 and when I start it, it says
  + no boot device please don't restart System.

  It is still under warranty because it was purchased only 6 months ago.
  I took it back where I bought it and they told me to contact Toshiba.

  I'm waiting on a reminder.
  I hope that someone can help you. He also asked that the HARD drive password.

  Where can I find this information?

  Hi Kym

  I guess the L50 Satellite cannot find the boot device (HARD drive), because the HARD drive was obtained with a drive password HARD and without this HARD isn't accessible disk password and the system does not start properly.

  Did you set this password for HARD drive in the past?
  I m request because this isn t password on new laptops. This HARD drive password can only be set by the owner of the laptop

  Of my knowledge if you know n t this HARD drive password, you will not be able to access the HARD disk in such a case, the HARD drive would be useless, and the data would be lost

  That's why I recommend you check if someone put the HARD drive on your laptop password where you n t know the password, you will need to replace the HARD drive and reinstall the system once more.