Satellite L305D-S5934 does not start - white screen

I have a problem with a 2 years satellite l305d-s5934.

In turning on, the power light turns on, but the hard drive light does not work and the screen remains blank.
I tried removing the battery and reboot without it after pressing the power button, but nothing changes.

Any advice on fixing the problem would be welcome.

Thank you

Hello

Remove the battery, disconnect the power adapter and leave the laptop disconnected for a longer period of time. After that connect the two parties can try unit lights up once more

If it does not, check the RAM. Remove the single module and test two slots with each module.
Sure, it might be possible that the two modules are faulty and that the procedure could not help you.

In the worst case the motherboard may be affected in one such case that mobo replacement would be useful.

Tags: Toshiba

Similar Questions

  • Portege 2010 does not start-> white screen

    Hello

    I need help because my 2010 does not start. When I press the power button, the power light turns on but I get nothing on the screen.

    He worked when my brother used it until the mouse has frozen and then turns off. He then lit it back in which case only the power led came up with nothing on the screen.

    The hard drive was clicking while it worked so I don't have a gut feeling that hard must the disc are dead and causing the cell not to return as when I power it on I get no hard drive light shape or sound the HDD at all.

    Even I get nothing on the screen. Not even the Red sign boot Toshiba. So, it's worry in me as well.

    Thank you, Claude

    Hello

    I put t think it is a HARD drive problem.
    If the HARD drive is dead, you will receive a message on the screen saying that the laptop is not able to find a boot device.

    If the Toshiba start screen does not appear I think that it s something wrong with the motherboard. I guess that the graphics card is dead. But to be 100% sure, verification is required.
    In my opinion, you should ask a partner or a technician for assistance.

  • Satellite C855D-124 does not start - black screen

    Hello

    I have a problem on my PC (by Satellite C855D-124) specifically was playing a game, and stopped from nowhere I could not do any command then off button.

    But as I returned the call and turned the lights appeared as the charge appears as a small light and also appears on your but then nothing appeared on the monitor, no warning or error message...

    Then it connects but does not seem to do anything and I would like to know if you can help with advice on what happened and what I do or what I can do...

    Sorry for the mistakes but I do on google translator...

    Hello Adrian

    For me it is not easy to understand your problem, but what you can do right now is to restart your laptop and check if the basic operations are working properly. Try restarting several times to see what will happen.

    Start the laptop computer can see you Toshiba welcome screen?
    Is there a usual activity of HARD disk at startup?

  • Re: Satellite A135-S2276 - does not start, the screen is blank

    I have a Toshiba Satellite A135-S2276, I bought 2 years ago. It worked fine except the clock which has never kept the exact time since I bought it. I turned it off Sunday night as I do regularly. But he could not turn it on Monday afternoon. The power light is not on when you turn it on, but primer. The light remains on but does nothing. The screen is blank when feeding it works.

    Can someone help me with the answer? Thank you

    Dennis

    It's hard to say what is happening to your knees. You can access Bios? Try to connect the external monitor and see (maybe the screen of the laptop disappeared)...

  • Satellite M60-170 does not start - black screen

    I have toshiba M60-170, before it was perfect, but now I don't know what is happening?
    When I try to start my computer just for 2 sec, everything is good, then the fan of sounds of the CPU and the screen is black and the stop of HARD drive.
    So everything is stop!
    I try to start again but still does not.

    Some body told me that it is the motherboard!
    Please, someone tell me what is happens with my beautiful laptop?

    Thank you

    It does not sound good friend :(

    But let's try this; Remove the battery and unplug the power adapter for about 20 min.
    After this short period of time connect the two parts, and try to start Notepad.

    If it doesn t help the chances are that your hardware is defective. Like other guys said, it could be a fault of the motherboard or something different like CPU, memory modules.
    I can speculate on failure.

    I think that you don't have many choices. In your case, you should contact the ASP in your country for a control of the laptop.

    Good bye

  • HP Pavilion a6500f does not start, white screen

    I work on a computer from a friend and I am a little confused. The computer is an HP Pavillion a6500f with a card mother Foxcon and Phoenix BIOS. When you press the power button, fans turn on, all the start commands and keyboard blinks, just like usual. The screen does nothing, however. No beeps.

    The problem started when my friend had some piece of hardware for internet phone and tried to connect it to his computer, the hardware connection to the router first, and then to the ethernet port. I don't know what the material is, honestly. My friend is Korean, and he got it from the Korea. All the details on the label are in Korean, and I have no idea what it says.

    Once it is plugged in the material for the first time, the computer froze. Over the next few days, he has frozen several times and gave him a few BSOD. After a few days, the screen just would not show anything more. He brought in Best Buy, and they told him it's dust on the motherboard that caused its failure, saying he needed a new. I think they were just trying to sell him a new computer, because it would be an amazing coincidence that the motherboard has failed because of dust when it is plugged in the new material, and in addition, he worked for a few days later. Any suggestion would be appreciated. Thanks for the help.

    Check the monitor on another PC.  Otherwise, it seems to be a motherboard problem. UGLY.  Best of cases it's power source.

  • Satellite Pro C660 does not start, no screen

    Hi guys I was wonder if anyone could help please.

    I have a Toshiba laptop Satellite Pro C660 - 2 DR who seems to be defective (just out of warranty).
    Everything worked fine until we came to a morning market and found that the screen remains off (black screen). There are no output through the VGA as I tested it on an external monitor.

    The CPU fan turns for a few seconds and then turns off.
    There is no noise from the hard drive read/write either. The power light stays on. I removed the hard drive to access data on another system that worked Fortunately

    . I also removed the RAM, battery and optical drive, but there is still no output to the screen.

    Is it sounds like a faulty motherboard?
    The laptop seems to be in excellent condition.

    Is there something else I can try please? I would be very grateful for any advice.

    Rich

    Yes, it looks like the faulty motherboard or a part of the motherboard as RAM or CPU.
    You said that you have already removed the RAM, but have you used a good RAM module tested?

    Theoretically, it could be just a problem of RAM but in the worst case, you will need to replace the motherboard and I think it would be really expensive repair.

  • Satellite C650 - Windows does not start correctly

    I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

    Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

    Hey Buddy,

    You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

    If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

  • Why Satellite Pro A300 does not start when you press the power button?

    Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

    In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
    Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

    What should I do to get a normal departure procedure?

    When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

    When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
    The same thing happen on my Satellite A300.

  • Satellite A200-1BJ does not start

    Hello

    My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

    I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

    In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

    No problem with the motherboard or power?

    Thanks for help.

    Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

    Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

    Have you installed any updates or anything that may be responsible for this?

  • Satellite P200-143 does not start

    My Satellite P200-143 does not start. The led lights up and the drive light flashes once then nothing. Holding the buttome 'on' for 10 second light outside.

    I tried to take out the battery for the afternoon, but no effect

    Any suggestions?

    P

    It looks like a dead last.
    The P200 is a new series and I think that the guarantee is valid. Then contact the ASP in your country and ask for help.

    Good luck

  • Re: Satellite A100-011 does not start, a black screen at the beginning

    I have a Toshiba Satellite A100-011, which is almost 5-6 years. It suddenly started to behave abnormal.

    First of all, I started to get a 1-2 sec black screen when he was running. The screen was on and off occasionally.

    After a few days, I could not started upward from my windows xp sp3 operating system. I tried to start in safe mode with networking to see if I had a few spy, virus or something. I ran avast, hijact, ad-aware and some more, but not found anything.

    Later, I tried to format my laptop with a xp professional, but this time I can't see any reflection that passes more fun running and a black screen. I just got a black screen at the beginning and it does not start.

    I plugged on a television screen, and here I have started. I have re-installed all the drivers and formatted, but all I get is a black screen on my laptop at the beginning.

    What should I do now? Do you think I have a problem with my screen of HW or a driver problem with nvidia geforce go 7600? Maybe I'm missing something?

    Thanks in advance for all replies.

    If you can see the picture on the TV there are a few s laptop display problem. Y at - it some problem connection or display itself.

    You want to fix it yourself? You can disassemble the laptop?
    I mean if you have any experience with this kind of things that you should seek professional help.

  • Satellite L500-1TC - does not start and the screen stays black

    Hello

    I have a Toshiba Satellite L500-1TC and since yesterday it no longer starts.
    The picture freezes and it restarted. Given that I can push the power button on my laptop and the LED indicates that it is on, but the screen remains black.
    No idea what I can do?
    The warranty is still active, so can I send it to Toshiba?
    Kind regards
    Sven
    (Sorry for my bad English)

    Hey Buddy,

    What you can try before you contact Toshiba official service is the following:
    [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

    If it doesn t work it seems to be a hardware problem, then contact an authorized service provider. If your laptop is under warranty, the repair is free :)

  • Satellite C660-2EL does not start

    Hi guys,.

    After a few days full of frustration here I am.

    I am working on a friends Satellite C660-2EL
    He was stuck in the endless loop of boot Win 7 and would not be recovered by any means.

    So I decided a format was the way to go.
    After the format using partition magic everything's fine.
    I reinstalled Win 7 and the installation was also fine. Once the installation is complete, and it's a reboot that I decided to jump into the BIOS and change the order of boot if I put the CD Drive first. If after changing the settings and then save and quit this crap won't start at all now, no CD HD or anything else.

    The toshiba screen flashes upward, but when I hit F2 now it freezes just tell to get into Setup.
    When I try to hit F12 the screen goes back to the blinking cursor.
    If I press anything I get the white screen with the cursor.

    I saw a video on you tube to reset the CMOS, I tried it work with no luck.

    Any ideas guys?

    Hello

    You want to say you have a cursor blinking in the upper left corner and the unit does not start CD or HARD drive?
    The blinking cursor is above all a sign of failure of the HARD drive.

    I recommend that you check the HARD drive with the help of a tool (freeware) called Drive Fitness Test.
    This tool creates a bootable disk that scans the HARD drive for malfunctions.

    If the HARD drive's fault, it be replaced

  • Satellite L30 - 10y does not start - BSOD

    I have a laptop Toshiba Satellite L30 - 10y.
    The problem is that the laptop does not start.
    I turn on the computer and the screen turns white and bottom screen then comes up for a fraction of a second that says...

    "stop: c0000218 {Registry file failure}".
    The registry cannot load the hive (file):
    \Systemroot \System32 \Config \DEFAULT
    or its log or alternation.
    It is damaged, missing, or not accessible writing. "

    I was wondering if anyonecould help me, let me know what this means and what I can do...

    Thank you very much

    Adam

    Hello Adam

    Here two interesting documents of Microsoft, but I really don't think that it will help you
    http://support.Microsoft.com/kb/307545/en-us
    http://support.Microsoft.com/kb/830084/en-us

    Maybe the best solution for you is to use recovery media supplied and install OS again. After that it all will again be OK.

Maybe you are looking for

  • series of hp photosmart d110 prints blank pages

    Hello... I have a HP Photosmart all-in-one D110 series. When I try to print, all I get is a blank page. I've tried everything! Cleaned printhead, alignment (prints the blank), feeding on and outside... Everything! It will print very well. Help me, pl

  • cannot pair mobile mouse wireless Microsoft 6000 with a Toshiba bluetooth usb adapter

    I have a toshiba bluetooth usb adapter, which is supposed to be able to connect with up to 7 bluetooth devices, but I can't seem to do recognize/find my Microsoft 6000 wireless mobile mouse.  is it because the mouse has its own transceiver or I do so

  • "HP printer Assistant" for HP Officejet 6600 WON 'T run.

    Windows 7 64 bit NO error message NO changes to the system until after it started then improved then just put update HP firmware It worked yesterday.  When you have selected the "HP OfficeJet 6600" desktop on the desktop shortcut, he ran a sreen whic

  • MR CH

    I USED TO USE WINDOWS 7 ON MY LAPTOP, ONCE I LOADED WI NDOWS 10 COMPUTER BECAME SLOW & HAS DONE THE WORK IS NOT SO THAT FRONT.  MY OFFICE SIMILARLY BEHAVED BADLY, SO I RELOADED WINDOWS 7 ON IT WITHOUT PROBLEM. I WENT BACK TO WINDOWS 7 ON MY LAPTOP &

  • Cannot publish a layout HTML5 sensitive on the RoboHelp Server

    I use the trial versions of RoboHelp 2015 and RoboHelp Server 10. We used the previous version of RoboHelp and RoboHelp Server to publish our help for some time. Our software moves or available to be consulted on various devices, so we try to test re