Satellite L350-277 - can I install driver touchpad of another model?

Similar Questions

• Satellite L350-277 - how to recover to factory settings?

  I had a lot of problems with my Satellite L350-277. I had already created a recovery to help drive the Tech that was installed on the laptop guy.

  In any case, it is time to reinstall again to the State of the plant. Thoughtless I pulled a drive of my computer Vista laptop satellite (I thought it was the original disc). All goes well until it restarts after you install windows system. On the screen was the warning that the product key was wrong, that's when I noticed the Vista on the screen. So I tracked down to the copy I made, it was not in the channel where I put the original his was among all the garbage I've had in the area (where I put all the waste). He was full of scratches and it does not load.

  What I had actually done using the Vista disc has been clear the program on the D drive that reads from Windows 7. I ended up going to the PCWorld Tech guys. They have reinstalled windows 7 for the cost of £50. I didn't mind that I got my laptop working again. What I did not know according to them, was I can't create a recovery disk.

  So to my question. Can I get my laptop back with all Toshiba knick knacks, so that its possible to create a restore disk. If not, can I get a Windows 7 disc installation program, download all drivers & create a restore disk in case of something that happens and I can reinstall windows 7? Get cramps in my fingers now. I'm not going on a little lol.

  Hey Buddy,

  That s a little confused is your story...

  Normally you get factory settings if you are using the Toshiba recovery disc. It will restore the pre-installed Windows version that came with your laptop.

  If you have Windows 7, you can t create a Toshiba Recovery disk. Only possible on what s preinstalled Windows from Toshiba, but if you install your own copy, you can create such a floppy.

  If you have the original operating system back, you can order a recovery disc Toshiba here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Win 7 restore without disk recovery on Satellite L350-277

  Hi all

  I'm trying to fix Satellite L350-277 of my sister-in-law following a HARD drive failing. Before the crash, he was running Win7 Home Premium (32 bit) that was preinstalled on the HARD drive. I managed to run Belarc on it before it went completely, but could not create the restore disc in time.

  Disk failure HARD seems to be due to bad sectors and once failed, could not get past startup repair. While they were inspecting HARD drive (in the USB enclosure), both C: and D: (backup partition) appeared to be intact, so guessed was discussed with MBR. I have used Clonezilla to clone new HARD drive and I'm now work - failure of HARD drive it's always like it was incase I need to clone again.

  With the HARD drive clone, I first tried to use bootrec.exe but some successful how to 'break' C: and could not see anything in the score.

  BTW I am currently using a copy of DVD retail Win 7 to provide the functions of "restore". However the Toshiba restore capabilities do not appear in the list of options. So I decided then to install everything on C: retail copy to see if I could access toshiba restore functions using data in D:, that doesn't seem to work either.

  Then I stumbled on this thread that gave me the hope to be able to start the Toshiba recory tool:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=44382

  I was hoping that Vista and Win7 preinstalls would be very similar, but the HARD drive has a recovery partition (D:\ HDDRecovery) and seems to fall in step 13. There are two files boot.wim in this partition: 'D:\hddrecovery\oddfiles\sources\boot.wim' and 'D:\hddrecovery\oddfiles\hddprep\sources\boot.wim '. Imaging either of these files does not cause the file according to the instructions of step 13. Here again, the guide is based around the Vista installation...

  So what I try to do is to retrieve the data from the old HARD drive with the damaged boot record in order to restore the Win 7 OS pre-installed Toshiba. I seem to have the data (old HDD still retains files) do not seem to have enough knowledge now do!

  Can someone help me?

  On the one hand I can understand your wish to install the recovery image, but on the other hand, for me personally, this is nothing but waste your time for nothing. In General, recovery image is designed may not be copied or manipulated so this guy was very lucky.

  Problem is that this recovery disk is not created after the purchase of the laptop.

  Maybe it sounds stupid to you, but I recommend you restore disk original order for this machine.
  You can order it on https://backupmedia.toshiba.eu/landing.aspx
  It costs 30 Euro only. With this money, you will get original recovery disk that includes the operating system active, all necessary drivers, tools, utilities and a few additional and useful applications.

  Using this disk, you will be able to have perfectly working machine in just 2 hours.

  One more thing: the use of the disc is unlimited and you can use it 1000 times and each time you have enabled and configured perfectly BONE.

• I can not install driver wireless on my Tecra A8

  I can't install driver on my Tecra A8 pta83E wireless.
  I downloaded intel and Atheros driver for XP, but it does' work.

  Help, please...

  It may not be possible. Why, you try to install the WLAN drivers? Your laptop not preinstalled with comes recovery media? Recovery image contains all the necessary drivers.

  Please check sticker Wi - Fi in the lower corner and we send the part number of WLAN card. If we can identify the one that is built into your laptop. What operating system you are using?

  Hey can man you please after more than two sentences. Who knows what you're trying to do and what the problem is here.

• Can I install Driver Visa and USB-GPIB on LabVIEW7?

  Can I install Driver-NI-VISA and USB-GPIB on LabVIEW7? Or I need to install LabVIEW8?

  Thank you

  Véronique.

  Veronica wrote:

  Can I install Driver-NI-VISA and USB-GPIB on LabVIEW7?

  Yes.

  Or I need to install LabVIEW8?

  Only if you want to program in LabVIEW.

• What is the latest version of the iOS that can be installed on the iPod touch model MA627ZO?

  What is the latest version of the iOS that can be installed on the iPod touch model MA627ZO?

  3.1.3.

  (139679)

• Can I install Win 7 on another computer?

  Can I install Win 7 on another computer? My laptop was stolen during a burglary at the House. I have the DVD.

  You can try as long that you also have the product key and COA. Since it is already enabled on this stolen laptop his will not be an easy task.

  If you a proof of purchase, then you may be able to get a replacement.
  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246

  You can also try Windows Genuine Advantage Support (scroll down to find your country)
  http://customercarecontacts.com/contact-Microsoft-support-phone-of-Microsoft-Corporation/
  US phone numbers: Windows 7: 1-866-530-6364
  Windows Vista: 1-866-530-6599
  Windows XP: 1-866-530-6599
  Microsoft Office: 1-866-530-6599
  All other products: 1-866-530-6599

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com

• If I've already upgraded to 8.1, can I install my 8 on another computer for updating an older operating system Vista?

  If I've already upgraded to 8.1, can I install my 8 on another computer for updating an older operating system Vista?

  Original title: Windows 8

  The game, February 6, 2014 21:06:21 + 0000, giebeman wrote:

  If I've already upgraded to 8.1, can I install my 8 on another computer for updating an older operating system Vista?

  Lol just a license, not two.

  In addition, even if you had two licenses, you couldn't do that. You can
  not upgraded from Vista to Windows 8. You can do a cleaning
  installation.

• I have enabled Acrobat XI since June 2013. How can I install second copy to another computer?

  I have enabled Acrobat XI since June 2013. How can I install second copy to another computer?

  You can install it on another machine the same way that you install on the first machine.  If you need to download to do this, you should have a link available on your Adobe account online.  If you are unable to find such a link, you can always download the trial version from the Acrobat (http://www.adobe.com/products/acrobatpro.html) product page and use your serial number to activate to use fully.

  If there is another problem that prevents you from know how to install it, you need to explain what the problem is.

• Satellite A20: I can not install the Ethernet controller driver

  I can't install the driver of my laptop ethernet controller. advice would be much appreciated.

  Hello

  The link in the ad doesn t work earlier then you should check this one out:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  There, you can choose: computer A series-Satellite Mobile-Satellite-Satellite A20

  Well, if you have installed your laptop not from the CD of Toshiba Recovery, so you must install all Toshiba drivers and utilities. This should be done in the right order!
  The chipset utility is very important. It must be installed first.

  Download the right WLan driver and extract it to the folder.
  Go to Device Manager, select the Wlan card and install the driver. The source of the driver is the folder of extraction.

• Satellite A110-277 - Windows 7 sound driver needed

  Hi, I'm looking for some advice
  I have a Toshiba Satellite A110-277, I bought a few years ago.

  Ive fitted a new SSD and installed Windows 7 32 bit, which works very well - his flight. I am very happy.

  I have problems with the sound that disappeard much then returns itself.

  When I put windows 7 on the machine, the only factor that has had a problem has been the High Definition Audio, so I went on the Tosh site and look for the driver.

  In Windows 7, there is no drivers so I used the XP driver and the noise began to work.

  However, the sound disappears much intil I restart the laptop.

  Is it a 32-bit driver including windows 7 for its edge?

  Satellite A110 supports the Realtek audio chip.
  The Realtek HD Audio driver can be downloaded directly from the Realtek driver download page:
  http://www.Realtek.com/

  or you can also download and install the driver from Realtek Win 7 32 bit driver page Toshiba UE which was released for an another Toshiba laptop (Satellite A200):
  http://Support1.toshiba-tro.de/Tedd-...1103103315.zip

• Satellite L350-H20 HDD / SATA-Controller Driver

  Hello

  yesterday, I tried to reinstall Windows 7 x 64 (and/or Windows 8) on my laptop. When I got to the screen where you can select the partition / drive to install the OS on, I wanted to delete all them were leaving (C: and D :) and recreate them for a bigger partition C:.)

  There was also a (System?-) partion with about 100 MB, do not remember the name yet, but I deleted it, too.
  I guess it was my big mistake, because then the installation has failed, and when I tried to restart, the screen where you set the partion was empty.

  No disk, none of the partitions is displayed.
  In the BIOS disk HARD is always displayed.

  So I think that, on this partition of 100 MB mysterious were drivers for the HARD disk or the SATA controller.
  I already searched the internet, Toshiba and HP Intel support center (because the SATA controller is done by intel) but I have not found the right drivers. I found a few tools like [this one | http://www.toshiba.de/innovation/download_driver_details.jsp?service=DE&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 790 & selSho rtMod = 773 & language = 17 & selOS = 29 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 12 & electedLanguage s = 17 & type = all & page = 3 & ID = 68573 & DISO = 2 9 & driverLanguage = 42] , but it is an application that cannot be incorporated as driver installation (can?)

  So my question is: where can I find the right drivers for my HARD drive respectively the SATA controller?

  Thank you very much!

  Hello

  As far as I know that the Satellite L350 - 20 H belongs to the PSLD8E series.
  All the drivers for this unit are on the page of the Toshiba UE driver
  The same page that you posted your original message.

  The Storage Manager seems to be the right package that contains the SATA driver.
  But I put t think that your problem is related to the missing SATA driver.

  The fact is that the HARD drive and partitions were visible before you delete the partition, and you have not added the SATA drivers.
  So I guess that the HARD drive needs to be formatted before you start the installation of the OS

  Guess what? Download and create a partition bootable stick usign the GParted Live free software
  Then you could boot from the USB key, could start the GParted and could create new partitions. After this attempt to boot from the new drive Win 7

• Satellite A500-13F: can I install drivers for ATI page?

  Hello

  I have the Satellite A500-13F with graphics ATI Radeon HD 4650.
  Can I install drivers from ATI downloaded from their site? I ask because theres a note on downloading the page saying as follows:

  Following books are not supported in this version: *.
  *...*
  * Computers laptop Toshiba (Please check with your mobile phone OEM for support of the drivers for these books) *.
  ...

  What does that mean? Do I have to install these drivers, will they work?

  Thank you

  Hello

  Still, you must download the drivers from the Toshiba driver page because they are pre-tested. Talk to the graphics driver, it is modified and a protection against overheating. So, I'm not advice you to use the ATI drivers. You can use them, but at your own risk.

  Welcome them

• can I install a touchpad on a Core 2 Duo T5500 R61i? (currently only a pointer)

  Sorry I see that ground had been discussed before, but I can't seem to find a definitive answer.

  I'm not a fan of the "pointer" and wants to install a touchpad.  Know someone of you guys:

  a: where can I find / buy a tablet to replace the palmrest?

  b: where can I find instructions (if possible)?

  Thanks in advance!

  Richard

  What I'm collecting after a short drive through the HMMs, your machine will not support Ultra NAV.

  Now, I could be wrong... know is to remove the keyboard and look for a connector to spare about two inches or more in the keyboard connector. If it is there, the laptop will be Ultra NAV. Otherwise, it will not...

  Good luck.

• Satellite L300 - I can not install an update for Windows Vista

  I can not install an update to Windows Vista after you restore laptop (satellite L300) to factory settings. Tried to install with automatic updates and download of the update on your computer. What auto-update error: 8024 to 000.

  When you try to manually install SP1 getting error: 0800FFFF. I tried to disable the firewall, Defender and the UAC. Someone with such ideas?

  The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.

  I would like for you to perform general troubleshooting steps for Windows Update.

  This diagnosis is generally applied to all Windows Update related issues.

  Stop Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net stop wuauserv
  net stop bits
  net stop cryptsvc
  4 Please, do not close the command prompt window.

  * Rename Windows Update records *.
  1. at the command prompt, type the following commands and press ENTER after each command:
  2 ren %systemroot%\System32\Catroot2 Catroot2.old
  3 ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
  4 Please, do not close the command prompt window.

  Registration of DLL's on Windows Update *.
  1. Please copy and paste the following text in a new Notepad document and save the file as WindowsUpdate.BAT
  2 if it is registered correctly the icon will go from a Notepad file in .BAT file which has two blue toothed wheels as its icon.

  Restarting Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net start wuauserv
  net start bits
  net start cryptsvc
  output
  4 now, please check the updates via Windows Update to determine if the problem has been resolved.