Satellite L350D works for a few minutes and then stop completely

Similar Questions

• Why the screensaver stop working after a few minutes and then go to the black screen permanently?

  I use Vista Home Premium with Explorer 8. My screensaver always works for about 5 minutes and then stops and goes to a black screen. Still black screen and my screen saver active ever again until I have move my cursor to display the page I was on. The screen saver does not available parameters except to set the number of minutes, I want to start. I ran antivirus, anti-spyware-malware etc the gamet, but anything is wrong with the screen saver. I am blocked and never had this problem before. Anyone know what is happening, what is the cause and how to fix this?

  If you changed your diet plan or changed some settings for your course, it can happen.

  (1) go in the bottom right of your screen and click on the battery icon and click more power options (assuming that you have a laptop. If you don't go to the control panel (Classic view) and go into power options)

  (2) on your package (indicated by a blue dot next to it), click on change plan settings and navigate screen however turn it off for a long time, you want it to be before he turns off the screen.

  I do not recommend messing around with drivers, because when I did, it messed up my screen and ended up back where I was before she has nothing (sorry James). of couse I messed up a little and the only real problem was the catylist control center has disappeared, and when I tried to fix this, I came across problems (it looked like a safe mode without the mode without failure of words on the corners)

• My internet connection is lost at home after a few minutes. I re - turn on the wifi disabled, ten and it works again for a few minutes and then repeats. It works fine everywhere else?

  Relatively new MacBook OSX El Cap 11.4

  My internet connection is lost at home after a few minutes. I stop the wifi, then turn it back on and it works again for a few minutes and then repeats. It works fine everywhere else?

  Please see recommended settings of WiFi routers and access Apple points.

  Despite these recommendations, some routers will work better with the latest Mac models if you turn the radio 2.4 GHz mode in settings and only use the 5 GHz. Note, however, that very old devices Apple and some third-party devices can then not connect at all.

  Some third party routers have advanced that you may need to change the settings:

  The encryption algorithm must be AES.

  The group key interval must be 3200.

  I can't give you specific instructions on how to change these settings, because all routers are different. Refer to the documentation for the provider.

• Vista crashes after using it for a few minutes and then does not start (after a few hours - it starts and again the same problem)

  I'll have this weird problem and did not find the problem. Suddenly my laptop (Lenovo Y710 - 4 GB RAM - Windows Vista Home Premium 32 bit) crashes after a few minutes of activity, Vista freezes. CTRL + Alt + Delete does not work. If I force close to the bottom and then try to restart, it do display anything. I tried to start in safe mode, but after pressing f8 and it only beeps and still doest appear anyting on screen you. If I try to start the laptop after a few hours it starts again and minutes it freezes again. I noticed this problem for the first time when using RDP to my desktop, but it wasn't the first time I've done RDP. I have not installed new hardware or drivers. Am not able to nail the question, would appreciate any help.

  Thank you.

  This is no doubt hardware failure. The laptop could be overheating and/or other components could be involved. Contact Lenovo technical support or take to a competent local computer Tech do not use a type of BigComputerStore/GeekSquad of the place.

  If you have a pretty good level of computer skills, you can test some components yourself although it is more difficult to make accurate material on a laptop computer troubleshooting.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  MS - MVP - Elephant Boy computers - don't panic!

• With Vista, I do not see a possibility to go to the screen saver after a few minutes, and then stop.

  I can't understand how to activate a screen saver. I would like it to go to sleep after 20 minutes of not used.

  Hello

  To activate the screen saver, right click on the desktop and click personalize and then screen saver

  Go to control panel-> hardware and sound-> power options

  Then click on change when computer sleeps

  We can see an option to put the computer to sleep, select 20 minutes (on battery and plugged in) and click on save changes

  Good luck

• Example: HP Probook s 4530: my short 4530 s for a minute and then stops

  My HP 4530 s works for about a minute and stops and will not work for more than a minute and keeps closing. The power cord must be unplugged and reconnected before I can restart the computer. It will run for 1 minute or two then stops. I tried to go to a restore point, but he did not finish before stopping. Someone at - it any help? Thank you

  @bayouparson

  Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).
  
  If you are not familiar with messaging private forum please click here to learn more.
  
  Thank you
  Omar

• MP3 plays for a few seconds and then restarts

  I created an MP3 player that works perfectly fine on my local machine but online plays the song for a few seconds and then restarts the song. He then played completely. The next songs also have the same behavior.
  
  Someone at - he meets away the problem before? Do you know a solution?
  
  Thank you in advanced for your help.
  

  I found a way to preload the mp3 before you play. Thank you for the help kglad.

• My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  Hi Mpsfeldt,

  Thank you for using communities Support from Apple!

  Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.

  To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.

  On AirPrint - Apple Support

  Best!

• After that turn the power off for a few days and then back on... all my desktop ICONS was reorganized.

  After that turn the power off for a few days and then back on... all my desktop ICONS changed. I placed the worms where I want that they and computer restarted and they get rearranged again. Help, please.

  Hello Kenneth Pincus,

  You can create a new profile on the computer and if the desktop icons stay on their position. If this is not the case, the other profile is corrupt. To create a new user profile, you can see the article mentioned below for the procedure.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

   

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

  Let us know the results.

• Hold the head of reading for a few seconds, and then go

  Hello world

  How to hold the head of a frame for a few seconds and then have the read head continue to play? I don't know how to do this in AS3.

  Thank you

  Rafa.

  These things indicate (to me), you have done a good thing and studied the help files for how to use the function, although you may have considered in the section of AS2.  In addition, get rid of them.  They are specific to some example were the help files.  The bit in quotes is an argument that would be sent to the function, which receives it as arg1.  I can only imagine that one of the mistakes was to not to declare the type of argument, that requires AS3, but like I said, just get rid of them altogether.  For AS3, things are slightly different, the return value is a uint

  Stop();
  var setHold:uint = setTimeout (holdPlayhead, 2000);

  function holdPlayhead () {}

  gotoAndPlay (26);
  }

• Satellite P30-110: the screen is blank, after working for a few minutes

  Hello.

  Can anyone adivse if they have encountered this problem before. After you start the system and worked on the laptop for a few minutes, the screen turns white as if the system is in standby mode. The only way to put it back on is by pressing the power button and everything continues normally until the problem reoccur.

  I have been informed that there may be a button faulty hibernation cela but surely you would say on the screen if the machine was going into hibernation with the usual calendar bar? And the fact that the screen turns back on as soon as you press the button shows his vigil no hibernation.

  Any adviser who can offer are welcome. If you need more information about the problem please let me know.

  Thank you very much

  Hi Paul,.

  If it is just the screen becomes black, but everything else seems to work fine, so I think that your FL inverter may be defective. This is the device that provides the lighting of the screen.

  I suggest that you only contact your nearest ASP for further diagnosis.

  Kind regards

• M535 Logitech Bluetooth Mouse works for a few minutes then stops working on

  I have a new mouse BT M535 and it works for a few moments then stops working.

  I use Windows 7 Professional Service Pack 1 with my Dell Precision M4800 Intel Core i7-4900MQ CPU @ 2.80 GHz, 16.0 GB of Ram, 64-bit Op

  Does anyone know how to fix this? Simply, it stops working and you must uninstall and then reinstall but does the same thing. We tend to Office I know sometimes things blocks as well. Any comments would be useful.

  Thank you in advance.

  Thanks for the reply. I was able to solve the problem by returning the BT of Logitec mouse and buy a mouse Microsoft 3600 BT. Works fine now.

• I stop using the computer for a few minutes. Then the screen of the computer turns off. Its does not sleep I need to turn off the computer then put into market and re - turn on the computer.

  If I have not used the computer for a few minutes then the screen of the computer turns off. The computer is not sleep. I tried to use the space bar to wake him but he won't answer.  I have to turn off the computer. Then turn on the computer. This has happened for 2 months. I have a Dell DM051, 446 GB HDD with 329 free GB, 2 GB RAM, Intel (r) Pentium (r) CPU 2.80 GHz, ASUS A7 Series 240 and Windows 8 Pro graphics. I replaced the graphics card because I thought that this could be the problem, but it wasn't. I need to replace to fix this? Thanks for your help.

  You have disabled things like Hibernate and hybrid sleep, etc. on the power options screen in Windows?

  Have you checked the USB settings in the Device Manager? Search tab power management for each listed root USB hub and uncheck the box "allow the computer to turn off this device...". »

  And do the same for entries under Human Interface Devices (HID) device as Manager.

  Then restart...

• When I leave my pc for a few minutes and return to continue working, I have to restart my pc every time, I don't sign, but I every time.

  I work on my pc, if I go to lunch or something wise, when I get back I have to reboot every time, it started about 4 days ago, please tell me what is happening?

  Hi JohnPloughman

   

  You have set display up-to-date drivers installed?

   

  Step 1 :
  To resolve the problem, you can check if uninstalling and reinstalling then the display driver allows.
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Step 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.

   

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• Whenever I close firefox, my computer hangs for a few minutes and I can't use it

  Since the upgrade to Firefox 10 and later upgrade, when I connect on firefox, my desk is totally insensitive and then after a few minutes working normally again. I use Vista and has not had the problem with earlier versions.

  Thanks cor - el your solution certainly improve things, in the end, I completely uninstalled firefox (with revo to delete the registry entries as well), then did a new facility, which has cured the problem.