Satellite L40: Can I remove battery while working with AC adapter

Similar Questions

• Charaging the battery while working

  Hello

  I have a T520 with a battery 9 cells and I want to know everything worth knowing about how can I keep the battery in the healthiest condition possible:

  I learned from his guides (T520 pdf, which are many... I don't really have the time to read all the) it is better to use the battery until it completely discharge then charge to 100% again and so on. also, I realized that if I am connected to the AC a lot (which means that I am in my room or anywhere not to use the portability of a laptop computer) it is best to disconnect the battery between 30-60% and put it in a normal environment (dry and not very high temp).

  you have more tips I should know?

  and more specifically: is it okay to charge the battery while I work on the laptop?

  so far I tried of angrrr while the laptop is off, but I see that it isn't working-it's difficult to synchronize between my tasks and load

  Thanks in advance

  lead_org wrote:
  (1) it is probably best that you keep the battery in the laptop for two reasons,

  (a) he acts as UPS

  (b) the laptop would not strangle his CPU if you are on the adapter 65 w.

  (2) there was no reason why charge the battery while working will cause problems if you use the adapter supplied with your thinkpad.

  If you want to optimize your battery, then take a look at this guide.

  http://leadorg.WordPress.com/technology/ThinkVantage-Power-Manager/how-to-TPM-to-prolong-your-batter...

  If he ordered the laptop with the battery 9 cells, he should have with the 90 Watt adapter.

• After you create a new playlist in iTunes, every song has the cover of the album and no box on the left side. How can I remove from the work and recover the box? TIA

  After you create a new playlist in iTunes, every song has the cover of the album and no box on the left side. How can I remove from the work and recover the box? TIA

  You can change the appearance of a selection by clicking on "reading list" in the upper right of the iTunes window. The desired view is probably "tracks"

• How can I remove connection to work/school?

  How can I remove connection to work/school?

  recently I went to work in an elementary school. and they would throw a computer. I asked if I could have instead of him be trashed. they gave to me and it works. but the problem is that I get this screen! (veuillez_Rechercher_vers_le_haut_sur_google.com_en_images_comment_window_7_avec_nom_d'utilisateur_d'ouverture_de_session) first picture after search)) he asks a login admin and password for users on the network. but I am not connected to the network. It's a connection for students and teachers. It does not show other users. I click on how I can connect on a different domain. but it gives me the administrator username. y at - it a program or a way to remove it or fix it?

  You must request the password for the local administrator of the school account.

  Alternatively, you can perform a destructive factory restore to make the machine like new. Check the homepage of the manufacturer for detailed instructions.

• How can I get headphones to work with phone I6

  How can I get headphones to work with phone I6

  Too bad.  I had to remove the cover of the phone to get a connection with the headset.

• I don't see the 'design' button while working with fluid layout, why?

  While working with the fluid RWD layout in dreamweaver:
  

  (1) I don't see the 'design' button, I can only see buttons ' Code, Split and living ", in Dremweaver CC, how can I get the preview of this design button?

  (2) and "Visual AIDS" is disabled, I mean I can't see the 'container' visually when you work in direct mode. So am not in a position to determine when and where to place the div

  Re: Is it possible to display the design view in the fluid grid pages?

• Satellite L500-128 - FN keys do not work with Win 7 64 bit

  Satellite L500-128 - FN keys do not work with the help of the operating system Windows 7 x 64

  Hello

  Satellite L500-128 belongs to the series of PSLJ3E.
  The European driver Toshiba page contains all drivers for this unit.

  Next to the installation of value-added package, you will need to install the Flash Cards Support utility v 1.63.0.4.
  Buttons controls the FN Flash Cards!

• Can LabVIEW Embedded for ARM works with any Board or just with a few predefined?

  Hello

  Can LabVIEW Embedded for ARM works with any evaluation committee or just with a few predefined (MCB2300, MCB2400 and EK-LM3S8962)? I ask this question because even if I chose "another processor" in the definition of the new project only 3 options are the corresponding arm of Phillips and LuminaryMicro.

  Thanks in advance,

  Howdy,

  LabVIEW for ARM supports the feature of targets for tier 1 (the mentioned Evaluation Committee) following this schema:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7066

  But you can transfer to other weapons if you follow this porting guide:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/6994

  The uProcesser SDK is intended for the port of other targets of DEPENDENCE (32-bit, of course) and technically it covers ARM as well. Alternatively, there are the LabVIEW C Code Generator: http://sine.ni.com/nips/cds/view/p/lang/en/nid/209015

• How can I activate my raildriver work with MSTS (Microsoft Train Simulator) on Windows 7.

  Original title:

  Microsoft Train Simulator AND Raildriver Desktop Cab Controller Train running on Windows 7, Home Premium / 64 bit OS

  How can I activate my raildriver work with MSTS (Microsoft Train Simulator) on Windows 7, Home Premium / 64-bit operating system?

  www.RailDriver.com ceased to support the Windows 7 feature running MSTS until someone out there in the windows 7 community of players have ideas that could help me?

  Hi Christophe,

  Sorry for the delay in response.

  To work around the problem, you can try to run the software in compatibility mode and check if it works.

  For more information on the same check this link:

  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run

  I hope this helps.

• Satellite L40 - Sleed and standby does not work correctly

  I have a portable Satellite L40 and it worked correctly until now. I turn and after I have put on standby (stand-by) mode; When I want to use my system, so to get that back to normal (I press the turn power button to exit the mode "standby" button), Windows Vista 32-bit restarts - it is not back to the moment I left it before the "sleep mode".

  Therefore, restarting Windows Vista 32-bit, and the screen "Windows has been disabled incorrect" appears instead to return to the configuration of the system that let him before sleep / standby mode.

  What can I do to fix this and make "sleep" mode works correctly?

  Hello!

  In your case, I'd do a BIOS update. You can search for updates on the Toshiba site
  http://EU.computers.Toshiba-Europe.com

  You should also look into the mangment of power. Here, you configure what happened when you close the screen, press the power button and so far.
  I found a great thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=141529𢣙

  Good bye

• Satellite L40 - 13G has 667 memory but works at 533

  Satellite L40 - 13G have original built in 2 x 512 667 of memory but memory works only at 533, why is this?

  I flashed the latest 2.20 bios of the Toshiba site.
  I did an upgrade on this model by changing its processor,
  Original image was celeron M 440 and now is core 2 duo T5600,

  The chipset on this model is 945GM and it supports core2 duo processor.

  Now main FSB is 667 for the cpu but memory works only at 533 dual Chanel
  and it's strange because the memory is 667?

  BIOS doesn't have a Setup for memory clock.

  Thanks for the help!

  Hello

  If you have read your question, you will get a response.

  Your machine comes with a Celeron M, which has a FSB of 133 Mhz. This means that the whole machine has been designed (including the BIOS!) to work with that CPU and JUST with this CPU regardless what the chipset is capable of. This means that no matter what CPU and memory you´ve installed in your machine, the FSB will collaborate in the FSB 133 Mhz (533 Mhz), but your Coreduo needs another front bus.
  And because the BIOS is programmed to put the FSB 533 won´t never be able to do your mem running at 667 Mhz. Maybe if you can reprogram your bios.

  Welcome them

• Satellite L40: Can I use Toshiba DVD to install Vista on a new HARD drive

  Hi people,

  I'm new to this forum... I don't know that there, can someone advise me.
  I replace my Satellite L40 HDD with a bigger drive, the current is only 80Gig.

  And my question is, can I use my Toshiba recovery Disc to reinstall Vista on the new HARD drive, or is it a hidden partition on the original HARD drive?
  If someone has done this, would appreciate an idiots guide to doing the same thing.

  Cheerzzzzzzzzzzz...

  Dave

  Of course you can do it.
  The DVD of Vista recovery Toshiba help you install Vista, all the drivers Toshiba and tools, and it automatically creates all the partitions.

  So what you have to do is to boot from the recovery DVD and follow the instructions on-screen ;)

  Check it out!

• Re: Satellite L40 - 14N - Ethernet port does not work

  Hello

  My ethernet LAN doesn't work anymore - laptop computer signals that it is fine - when I plug a cable in there still says no cable attached.

  I've updated all the drivers - is their a FN key that turns off? or can someone help me?

  What laptop Satellite you have exactly?

  The LAN port can t be enabled or disabled with a FN key. It is possible that wireless (FN + F8).

  Have you tried to update the BIOS? You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Satellite L40 - 17O - LED Wireless does not work

  I bought laptop Satellite L40 - 17O a couple of days. Wireless LED doesn't work. It worked the first time after I installed the OS (XP SP2) top, and now it doesn't work. I didn t try again Wi - Fi.

  I don t know is that it works or not. Maybe it's just a problem of LED.
  What do you suggest me?

  The WiFi network works with the original image of preinstalled Toshiba?

  I mean this laptop came with Vista and normally everything should works using the Vista operating system.
  I assume that you need to install a compatible XP WLan driver for notebook simply you all what s

• Satellite L40 PSL48E FN keys do not work

  I have a laptop Toshiba Satellite L40 PSL48E, and it works perfectly, except that the FN + no matter what key does not work.

  I've been option on this forum, and I found the solution, which is: download the common Module and the Hotkey Utility.
  However, this only seems to work for Windows XP and I have Vista Ultimate, so this won't work.

  Also, I discovered that FN + F11 seems to work, and I searched on that one too, but it was something like:

  «So, go to "Run" (i.e. run an application) and run msconfig.exe or simply search for msconfig.exe.»

  After the opening of this program, you will have a few tabs and a tab should be as 'start-up', it should be the filename TCrdMain.exe and a checkbox before that. Uncheck the box, and you disable this cardmanager.
  "

  Well, I went to msconfig.exe, but TCrdMain.exe was not on the list...

  Someone knows how to fix this?

  Thanks, Koen.

  Hello

  You must update the BIOS is you get the ID_ERR_NOTINSTALLTVALZ_MESSAGE error message during installation of VAP.

  Check it out!