Satellite L40 - Wi - Fi connection after restart problem

Similar Questions

• Why do I have to restart my internet wireless connection after restart of Windows Vista?

  why I have to restart my internet wireless connection after restart Vista

  Hello

  Second time to answer that line however initially seems to have disappeared. The message displayed
  upward in my Threads as if there was a response.

  -----------------------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Map Wi - Fi on Satellite L40 does not connect to the wireless network

  Hello

  I have Satellite L40-15B with a realtek RTL8187Bcard. Problem is I Don t get a connection on wifi, but everything seems ok. I ve installed the BIOS update, the latest drivers and updates for Vista. Psychic Network is turned on, network switch is on, and yesterday everything worked fine. I had this problem too when I bought the laptop but thought that I solved it. Not!

  Vista tells me that everything is installed and works well. I can also see some available networks, but when I try to connect it just doesn't work.

  Someone at - it an idea what to do next? (by the way the network is ok other laptop computer wifi works fine)

  Thank you

  Albert

  Hello

  Your wireless network card seems to be properly recognized in Device Manager. And the problem is that you are not able to connect to the WLan router. Am I wrong?

  Have you tried to disable the Wlan encryption settings and then test the WiFi connection?
  You should also try to reset the settings of the Wlan router.
  Sometimes it helps.

  I got a WLan connection problem too I've checked everything twice and nothing worked Finally I reset the Wlan router. and surprise, surprise it's a key

• Toshiba Satellite L40-139 - XP sound card driver problem

  Hello
  I'm having a problem to install the driver of sound card in Toshiba Satellite L40-139, I installed windows XP with SP3, all the other drivers that works very well, but I'm unable to install the sound card driver, I have tried all the King of the drivers from the site of toshiba and sites of HRD, I installed some microsoft pathces (KB835221 & KB888111) but still nothing.

  > I found a solution

  Thanks for sharing

• Re: Fall of Satellite L650D-14R - WIFI connection after rest

  Hello

  I recently bought a Toshiba Satellite L650D-14R and I have a problem with my wireless network, RTL8191SE card.

  The NIC works fine when you start the computer, but if you put the computer in sleep mode, when activating the computer again, the wireless internet connection is passed. The NIC still detects all different networks, but everything just cannot connect to them. The only thing I can do is to reset the network card, and then it works to connect to the internet wireless again.

  I have a Netgear wireless router, and if I use a netgear wireless usb adapter this problem does not occur. Anyone know what could be the problem here? I think that it is a software problem, but maybe I'm totally wrong. What drivers? Some settings? Any comments would be greatly appreciated. Thank you!

  Hey,.

  > but if you put the computer in NAP mode
  What is mode NAP?

  In any case, have you tried updating the WLAN drivers?

• Satellite C660 - no Internet connection after updating BIOS

  I am a novice user and have a Satellite C660 under warranty that I don't use for surfing the net and Ebay so I hope I can explain my problem!

  Toshiba bulletin board said that the need to update BIOS, so I followed the instructions but since then I have no internet connection, and cannot restore the connection that I lost all help Toshiba Bulletin Board today lost and none of the programs to sort the problems work - e.g.set assistants etc. I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?

  Can someone tell me if it's a failure caused by the BIOS update or I would return laptop to John Lewis for repair? Thank you very much for reading this

  Hey Buddy,

  The default settings in the BIOS load after update? If this is not the case, go into the BIOS and load the default settings. You can enter the BIOS if you press F2 before Windows start and then press the F9 key to load defaults. Then save & exit the BIOS Setup.

  You can access the Internet now?
  You try to access the Internet with LAN or WLAN connection?

  Also check device manager if all devices are recognized correctly.

  > I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?
  You can create the Toshiba Recovery disk every time. Just launch the pre-installed Toshiba Recovery Media Creator and follow the instructions on the screen. You need just a few blank DVDs to create the discs. Disks contain a factory image of settings which can be restored each time and how many times you want to so with these disks, you are on the safe side ;)

• Cannot connect after restarting Windows Update 23/02/10

  Hello
  I'm having a problem after auto restart of the latest updates of Vista.
  I don't know what specific update may have caused a problem, but as a tech person his life, I can see an update as the only reason for my problem. Restart the update took place earlier today 23/02/2010

  My problem is that my password for the user only account that I have on this PC no longer works. I tried by default all passwords I can think of and none work. I've seen similar problems since that a restoration of the system through safe mode may solve this issue however start in any safe mode, I invite me for the password for the connection. It's where that plan falls apart, he told me that "user name or password is invalid":

  I have an account, and the password is quite typical.
  I don't have a backup disk or a USB pen to reset or change the password.
  I don't have any of my discs to install due to travel abroad.

  Anyone with similar problems?
  Any help would be appreciated.

  Concerning
  Andy

  AndyUK506,
  If you are able to boot mode safe mode with command prompt, then you can use the Manager of Package to remove the updates. Then you can see if you are able to connect.  If this doesn't help you need to see what options of recovery you would have the recovery on your system partition.   If you are able to do an inplace upgrade reload Windows and let your data in tact. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L50-B-1GL - connection WI - FI problems

  I bought a Toshiba Satellite L50-B-1GL

  I'm having problems with the WiFi signal reception, I found that it is that in this book because I have an another older toshiba and receives the signal also correctly correctly receive the signal in the cell, the problem is with this laptop, low signal of a Bay and up to two or three at the most, sometimes gives even me the message that there is no sign , do not work with the battery, I am plugged into the mains.

  Please can you help me, or I have to send for repair.

  Thank you.

  Message has been translated

  Hello

  I think you have some connection problems Wi - Fi because that card LAN of the laptop that is Intel 802.11ac + agn supports WLan standards (AC, A, G, N) probably there is a problem of compatibility between the router and the especially WLan card if the WLan router has been configured for 802.11 B or G only.

  If you want to establish the WiFi connection, you must ensure that the road and the wireless network adapter supports the same WLan standard.
  For example: the router + wireless network card must be set to 802.11 A or G or N because these standards are supported by the WLan module.

  For the wireless network adapter, you will need to check / change the settings in:
  -> WLan card device manager-> properties-> Advanced tab

  On the Advanced tab, you'll find settings and options that must be controlled and configured.

• Why Satellite L40 - 18z usually connect to the internet?

  Hello

  I'm trying to fix a L40 18z to one of my friends and im having some trouble getting the network adapter and wireless network card works properly.
  What's wrong?

  I reformatted the hard drive, installed real vista 32 bit service pack 2.
  Downloaded all the drivers for the L40 18z of toshiba and the realtek lead toshiba drivers do not work: O)
  The led light for the built-in wireless is not turn on?

  Theres 2 unknown devices in the devices (those of the wireless card lan) Manager. I think that the otherones, a usb port controller. (something to do with the #0003 port
  I plugged a direct cat45 cable to my router and it does connect it says just local.
  I tried a USB to external usb 802.11 g and it doesn't connect either. When I managed to get to tell local and internet, that would still not connect.

  What is the problem someone?

  As I begin to think that the motherboard is tired...
  Oh and I flashed the bios by using the update from toshiba.

  Any help would be greatly appreciated thanks: O)

  Looks like you just need to install drivers.

  These two unknown devices right-click and click Properties, go to the Details tab and tell us the numbers VEN_xxxx and DEV_xxxx.

  You can determine what these devices are entering the FRI and DEV numbers in this Web site: http://www.pcidatabase.com/

• Satellite Pro M50: WLan connection after 10 min lost IP address

  I just bought a Satellite Pro M50.
  I can connect to the router using Congfigfree OK, but after 10 minutes or if she loses IP etc.
  Have refresh the wireless connection to reconnect.
  This continues every 10 minutes approximately.

  Hello

  Thanks for the information updated and nice that it works.
  As far as I know, this option is enabled in power safe during work only with batteries.
  But for better performance of Wlan this sure option should be disabled.

• Satellite L750/755 - no connection after Windows updates

  HI, I have a brand new L750/755. network card is atheros.

  There is no way to connect to the internet after you install updates to windows (85Mo, framework 3.5.1 security updates).

  Computer laptop will always find any accesspoints, but connect only with limited connectivity or no internet access.

  I had to restore the laptop before the updates installed to solve this problem.

  How can I work around this problem, or if not how can I get these updates to stop installing on close?

  Thanks in advance

  PS I had already tried installin the latest NIC drivers, change the power settings and connections to all other routers. nothing has worked.

  > I had to restore the laptop before the updates installed to solve this problem.
  Do this and after having done this only automatic disabling Windows update. When you manually do Windows update, install important updates only. Before you begin to update the optional check listed and disable updates updates of pilot.

• Satellite P100-277 - recovery connection and WLAN problem

  Hi, I have a Satellite P100-227 and of the format and reinstall windows. First of all, the Toshiba Recovery disk wouldn't work - it would go through the motions, but windows would freeze on the screen where it is intended to calibrate your screen before entering the windows installation. It is the SECOND disc I bought at Toshiba who broke by the way! I'm worried about my CD before ask you, I used this disc once before to shape about a year ago and it has not been touched for. I tried both discs and no work - the other oldest won't read even since the drivers of compression at the beginning of the recovery.

  So I'm an old XP disc (I run XP btw) and decided to try to install windows this way to check that my laptop was working, which is - I installed XP very well to a good Windows disc and a code is legitimate. However, I have now no drivers for my laptop and the internet does not work - my wireless will not connect at all, let alone register that there is a wireless connection (he used to appear in the lower right, once it was turned on). "When I go to Device Manager and look for network adapters, all there is ' 1394 Net adapter" is said works very well.

  I wonder if there is no drivers for my wireless card, as I have not used the Toshiba restore disk. I tried to put in the 'work' toshiba disk in to see if there are drivers out there that I can access but can't find anything. I can't afford, or be bothered to order a different CD from Toshiba that will break after a format, so my question is; can someone link me to the drivers/software I need for my laptop to connect wirelessley to internet please?

  I hope I gave enough information for a person to be able to answer me - I need my laptop ASAP to work!

  Thank you!

  Hello

  Perhaps this Toshiba HowTo might help you:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  I think that you didn t find a good driver Wlan and that's why you couldn't get the WLan to work.
  Check the Wlan card, then you will get the right driver.

  PS; Here you can find all WLan drivers for Toshiba laptops.
  http://APS2.toshiba-tro.de/WLAN/

• EAS connection after upgrade problem

  Hello

  One of the sellers made Hyperion 11.1.2.3 upgrade to 11.1.2.4 (on-site). We found that when you are trying to connect to the console of Regional service get us below error if the same references work very well for the workspace. The user id is "admin". We tried to use different browsers, but even it is.

  I suspected that it is a problem of java, but java is supported it's Java Run Time approx 6.0.4.3

  Error:

  [username: < anonymous >] [ecid: 00iX1oIWGFJFw00Fzzw0w00000ek0000Dz, 0:1] [APP: SAE-#11.1.2.0] [URI: / eas/eas] An unknown error has occurred. See the for more details [] stack trace below

  java.text.ParseException: date of: "0110".

  at java.text.DateFormat.parse(DateFormat.java:337)

  at com.essbase.eas.essbase.server.ServerPrimitives.getPropertiesLicense (unknown Source)

  at com.essbase.eas.essbase.server.ServerLogic.getProperties (unknown Source)

  at com.essbase.eas.essbase.server.ServerCommandListener.getProperties (unknown Source)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at com.essbase.eas.framework.server.application.AbstractCommandListener.handleEvent (unknown Source)

  at com.essbase.eas.framework.server.application.DefaultCommandDispatcher.dispatchEvent (unknown Source)

  at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent (unknown Source)

  at com.essbase.eas.framework.server.application.EventDispatcherWorkListener.handleEvent (unknown Source)

  at com.essbase.eas.framework.server.application.DefaultWorkDispatcher.dispatchEvent (unknown Source)

  at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent (unknown Source)

  at com.essbase.eas.framework.server.application.DefaultApplication.generateWorkEvent (unknown Source)

  at com.essbase.eas.server.DefaultServlet.handleRequest (unknown Source)

  at com.essbase.eas.server.AppManServlet.doPost (unknown Source)

  Hello

  Also pathetic that the solution may seem but customer was bent on NOT to restart the service. Anyway, I restarted the service EAS and slipped the question.

  Thank you

  Anjum

  Learning the ropes of Hyperion

• Is it possible I can get the virtual computer connectivity after restart to connect to the local network in the host operating system?

  Hi all

  For some reason, I have to disable and then enable the LAN connection in the host operating system. If some virtual machines are running during this time, connectivity all VMs for out-of-world are lost, they cannot connect to the host even more (by running the ping command). I tried a few methods to retrieve the connectivity, but all have failed, for example,

  1. reboot the virtual computer

  2. restart VMware Workstation

  3. restart the corresponding system services in the host operating system

  The only way I can retrieve all is to restart the host operating system itself.

  Yes, is there short any path, I can retrieve the connectivity of these virtual machines?

  Thanks in advance.

  Yark

  yarkwang wrote:

  I use a Broadcom NetLink (TM) Gigabit Ethernet NIC, shows the date of the pilot 2006-5-15, but it works well, I think.

  Try installing a newer driver.  According to the site, you should be able to find a driver dated 2008 or 2007 (depending on which exact model of NetLink card you have):

  - http://www.broadcom.com/support/ethernet_nic/downloaddrivers.php

  1 came out of safe guard 360

  Sometimes out of some firewall programs is not enough (they keep still themselves installed in the network of the host stack, even if they are 'closed').  You may need to uninstall to make sure that it is not interfere.  (Search the forums for support for your firewall software see if anyone else is having problems with vmware and 360 safe guard).

• Satellite P100-434: wireless connection with Vista problem

  Just bought this laptop with Vista and so far could not get the wireless to connect, I have 3 other computers and they will all connect, I have reset the router and set up new accounts on other computers without problem, but unable to do it on the P100.

  I tried the new RADAR feature and will not pick up all the networks, but by trying to establish a new connection it shows that a wireless network is available but it is nameless, although my network is named, I took the passkey of the network so that it is open but still does not connect, LAN via ethernet fine work.

  Wireless switch is on, but when I drag off switching wireless says WE

  Hello

  I can't give you an exactly the answer why you cannot connect to your WLan with Vista because there are so many options that should be checked.
  But I think that you will find the solution yourself with a little help from the Microsoft Web site.

  Please see this site:
  Connect to a network with Windows Vista wireless
  http://www.Microsoft.com/technet/community/columns/cableguy/cg0406.mspx

  You will find many useful tips, screenshots and Tips how to connect to WiFi with Vista.

  Please post again if you have found the key