Satellite L50-A-19N - sound doesn't work sometimes

Similar Questions

• Clasps to satellite L50-A-19N - hard drive

  Hello

  I own Satellite L50-A-19N, seen the question I sometimes hear a clap louder or the series of several shots of the laptop.

  Probably, it comes out hard drive.
  If I find SMART for internal HD() is no problematic interest, record Cdystaldiskinfo status is evaluated as being healthy.

  However the occasional claps don't look too normal for me, never heard these and with such a volume of my previous computers.

  Is this potential precursors disc collapse?
  The laptop is not too old, about eight months only.

  HGST HTS541075A9E680

  Model: HGST HTS541075A9E680
  Firmware: JA2OA560
  Series number:
  Disc size: 750,1 GB (8.4/137.4/750.1/750.1)
  Buffer size: 8192 KB
  The queue depth: 32
  number of sectors: 1465149168
  Rotation speed: 5400 RPM
  Interface: Serial ATA
  Major Version: ATA8-ACS
  Minor version: ATA8-ACS version 6
  Transfer mode: SATA/300. SATA/300
  Working hours: 5251 hours
  Turn on the County: County 242
  Temperature: 41 C (105 F)
  Health: good
  Features: S.M.A.R.T., APM, 48-bit LBA, NCQ
  Level of the APM: 4080 h [ON]
  AAM level:

  S.M.A.R.T.
  Name of the attribute ID Wor Thr RawValues heart (6)
  Read error rate 01 100 100 _62 000000000000
  Flow performance 02 100 100 _40 000000000000
  _33 03 187 187 000E00000001 Spin-Up Time
  Number of start/Stop 04 100 100 __0 000000000102
  ___5 05 100 100 000000000000 reattribue number of sectors
  07 100 100 _67 000000000000 seek error rate
  _40 08 100 100 000000000000 get punctuality
  09 _89 _89 __0 000000001483 market hours
  0 a 100 100 _60 000000000000 Spin Retry Count
  0c 100 100 __0 0000000000F2 Power Cycle Count
  BF 100 100 __0 000000000000 G-sense Error Rate
  C0 100 100 __0 000000000024 Power-off retract count
  C1 _91 _91 __0 0000000177AD Load/Unload Cycle Count
  C2 146 146 __0 0031000E0029 temperature
  Number of events C4 100 100 __0 000000000000 reallocation
  C5 100 100 __0 000000000000 current pending sector count
  C6 100 100 __0 000000000000 incorrigible sector count
  200 200 __0 000000000000 C7 Ultra DMA CRC Error Count
  Number of attempts at loading/unloading DF 100 100 __0 000000000000

  I guess that this noise is coming from the HARD drive.

  I had a HARD drive (as far as I can remember it was at Hitachi) in the past who created similar clicking sound.
  But the HARD drive worked properly.

  However, I created a backup of my important files in case the HARD drive would be crashed.

• Maximum external resolution for Satellite L50-A-19N (PSKK6E)

  Hello

  What is the maximum resolution supported by this laptop to an external output (provided with HDMI Cable DVI)
  To sum up, the laptop contains Intel HD 4600 and GPU from NVIDIA GT 740 M

  To extend my question:
  How can I find the version HDMI of this notebook and how to evaluate if the laptop will produce a good refresh (60 Hz +) to graduate to Full HD resolutions?

  External resolution depends on the graphics card as well as the interface.
  The Satellite L50-A-19N plug provide next Note:

  Maximum external video modes:
  Maximum resolution: 2 048 x 1 536
  Maximum refresh rate: 100 Hz
  resolution No interlaced with a maximum refresh rate: 1,600 x 1 200
  Output HDMI support 1080 p format

  The GT740M that is used in this notebook NVIDIA GeForce takes in charge the following resolutions:
  EDP LCD 1.2 support - up to 3840 x 2160
  LCD LVDS support - up to 1920 x 1200
  Analog VGA display Support - up to 2048 x 1536
  Multimode DisplayPort support - up to 3840 x 2160

• Satellite L50-A-19N: SYSTEM_SERVICE_EXCEPTION (igdkmd64.sys)

  Greetings, on portable Satellite L50-A-19N (GT 740 M + i HD 4600), I get this BSOD more often than occasional crash (~ ~ once a day).
  Driver name, I guess it's GPU problem (or GPU driver software).

  After installing the latest graphics graphic drivers dedicated, and integrated Intel HD Graphics 15.36.21.64.4222, Geforce 353.06 WHQL, this problem persists for about a year, however in the last few weeks in high intensity.

  Mobile home is connected only to external LCD for output (via original HDMI 1. 4A, audio HDMI cable activated, resolution 2560x1440@60Hz). Also, using the official monitor of the manufacturer driver (it's just INF file).

  I don't know if it's a software driver or card/GPU mother/HW failure problem. Eventually can be caused by bad HDMI Cable or display panel (?).

  I have clues to find the source of the problem and take the next steps to remove the problem, thanks in advance for any relevant info.

  Hello, I think I have the same problem.
  In my case, the problem goes away when I run out of battery. Try also chain the parameter of dynamic frequency Cpu bios of low dynamic forever.

• Why my home button doesn't work sometimes?

  Why my home button doesn't work sometimes? I have to click several times to activate it. I have an ipad 1 month 12.9 pro. Very frustrating. Thanks for any help.

  You can use a virtual Home button. To enable it, go to settings > general > accessibility and scroll down until you see AssistiveTouch *. You want that lights up.

• Satellite A100 (PSAA9A) - sound doesn't work - tried all of the obvious solutions

  I have a satellite A100 (not sure the model, but the model is PSAA9A-00S00F)

  The sound does not work, but I haven't used the noise for about 7 or 8 months ago.
  Mute is not on, all volume controls are ok.
  There is only the internal speakers.
  I downloaded the current drivers.
  Running Windows XP Pro.
  I did the Windows updates that I can find and made the process of troubleshooting through Windows.
  I'm out of warranty so wouldn't send away to get looked at unless absolutely necessary due to cost.

  The CD/DVD drive is not read, but the sound is not related to this, because it will not healthy for web content.

  Someone at - it other suggestions of what could be the problem?

  Thank you!

  Hello

  You reinstall Windows or only the sound suddenly stopped working?
  And the sound card is in the Device Manager? There are some yellow exclamation points?

  Before installing the new drivers, you must remove the old drivers first. This means remove the older version of the driver and the software, and then restart the laptop. Use CCleaner to clean the registry and restart. After this installation, the latest driver from Toshiba Europe page.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, make sure you have these two installed Microsoft Hotfixes:
  AUDIO Patch1: Http://support.microsoft.com/kb/835221 KB835221
  AUDIO 2 Patch: KB888111 http://support.microsoft.com/kb/888111

  Welcome them

• My Satellite L50 - A - 1 7 no longer works

  Just some time ago, I was playing a game with friends, but all of a sudden my screen freezes and the sound. Pressing the powerbutton or now in did nothing. Only, I opened my Toshiba Satellite L50 - A - 1 7 and disconnected the battery because it has not turned off.

  It does not start anymore!
  Can someone help me soon?

  Thanks for the comments.
  It would be interesting to know if the problem will happen again if you use RAM in the first place again.

  Anyway, the key is that everything is working OK again.

• Satellite L50-A-19N - HARD disk controller is not compatible SATA 3

  Hello.

  I have a model of L50-a-19n satellite.
  The hard drive it is HGST Travelstar 5 K 1000 750 GB, SATA 6 Gbps (HTS541075A9E680/0J22412).

  On Web site of the manufacturer and as Aida64 diagnostic software the hard drive is named SATA-III 600 MB/s.

  But when I run the Crystaldiskinfo software or simillar, it is said that the taken and current transfer mode supported SATA/300.
  Why is it like that?

  Is this some sort of software limmitation?
  In the Bios, I turned on the performance mode.

  HARD drive supports SATA 6 Gbit/s, but the portable controller is probably limited to SATA II (3 Gb/s)

  If the HARD disk controller does not support SATA III, HARD drive performance will be limited.

• Satellite L50-B-211 - Touchpad does not work

  Hi I have a question

  We just bought a Satellite L50-B-211, but the touchpad is not working properly.
  Move the pointer autour is no problem, but the buttons do not work.

  Using the buttons does nothing, left or right clicking has no effect?
  If I want to get the properties of a file right-clicking does not work?
  (two fingers press work)

  The hardware is correctly installed, there is no problem in the configuration of the device.

  Do I have to return the device (before installing our software / config the device to our needs)
  or is this a software bug?

  According to specification for laptop, your laptop was supplied with Win8.1 pre-installed so that all the necessary drivers are installed and all hardware should work fine.

  Try please check all the touchpad settings and check if changing the settings has positive effect.
  What you can try to do is to reinstall the original recovery image and test once more with the factory settings. If the result will be the same, I recommend you to contact your dealer as soon as possible and explain the situation. Ask if you can get the new machine.

• Satellite L50-B-166 - WLan does not work under Slackware

  Hello

  I installed a copy of Slackware 14.1 on my new Toshiba Satellite L50-B-166, but when I start it up, the wireless interface does not appear, even launching ifconfig - a.

  I installed the iwlwifi driver but without result.
  Can anyone help?

  Thank you

  Hello

  Could you please put the output of the following commands:

  lsusb
  lspci

  BR

  Tom

• Satellite P300 (PSPCCA) - fingerprint reader doesn't work with IE8

  Fingerprint reader worked very well for all websites accessible Internet Explorer 7 vi.
  Then upgraded to IE8, fingerprint software has stopped working in IE. Uninstalled the old software of fingerprint and a downloaded from the toshiba site - updated version still does not.

  Does anyone have a similar experience?

  Hello

  As far as I know the old fingerprint software doesn't work with IE8 and Firefox 3
  You will have to wait for the update.
  I m not very well what version it will be, but I think soemthing with 3.0 or higher

• Why the sound doesn't work on my computer when it shows 100%?

  Currently, the sound does not work on my computer. He did it on 3 times in recent weeks. It did not last more than a day before it starts to work again. He's now over 2 days. I experienced this in the past & it was because he is somehow, control of the Cup itself. It is not cut now. It's showing 100%. Could there be something else I can try before taking it to a repair store?

  Thank you

  [Moved from comments]

  Currently, the sound does not work on my computer. He did it on 3 times in recent weeks. It did not last more than a day before it starts to work again. He's now over 2 days. I experienced this in the past & it was because he is somehow, control of the Cup itself. It is not cut now. It's showing 100%. Could there be something else I can try before taking it to a repair store?

  Thank you

  [Moved from comments]

  Reinstall the sound card driver.
  Visit the manufacturer's Web site to download and install the latest audio driver sound card.

  More help: -.
  No sound in Windows

• Dell XPS One - sound doesn't work after coming out of sleep

  My new DellXPS One audio (office) is not working when I recover mode standby. I got to go to sleep after 10 minutes. When I wake up, the sound does not work. I check all the sound settings, (for example, check if it has been cut), but I don't find anything wrong. The speaker bar shows me that it's playing sound, but nothing's come out of the speakers (internal - I have nothing plugged into the speaker port). This problem can be solved by restarting my computer, but it's irritating if I do it all the time.

  I'm in Windows 8.

  Any ideas?

  I found that the solution was the same as what Kelley says above after the support call.

  Make sure all audio drivers are loaded and the problem goes away.

• My sound doesn't work - error 1740 - 0x800706cc

  so yesterday, I had a computer his windows update 8 by the way and shortly after that my avg (using avg 2014) said they needed eliminate a threat and for that it needs to restart the computer after the computer has restarted the sound wasn't working and this image appeared

  

  After that, I tried to go into services and start windows audio, but then this message appeared

  After that I tried the system restore, but a message to say that he did not cause restricted antivirus I tried once more and this message showed again once I went ahead and disabled the antivirus and tried again but no luck the message showed once again

  How I do now please help! My laptop is like my baby

  so I restored it from the vault and it still does not work no one knows what to do now

  Right click on start > Select Device Manager

  Click on the > next to his

  Right click on the driver > select uninstall

  Close the Device Manager

  Restart the computer and Windows will reload the driver

• My keyboard doesn't work sometimes

  My buttons on keyboard Asus Aspire E5 - 571 G-39V3 (E, 3, 4) stops working sometimes and sometimes it buttons doesn't work.

  I have to use the on-screen keyboard. I bought this computer 3 months ago. I tried to clean the buttons but it does not work.

  Please help me!

  In this case, check if help to reinstall keyboard drivers. To do this, follow the steps below:
  1. press on the 'Windows key' + 'R' to open the run window.
  2. in the run window, type Control Panel and press the Enter"" key.
  3. go to "Keyboard" and then click on the tab "hardware".
  4. click on "Properties" and go to the tab "driver".
  5. click on "Uninstall" to uninstall the drivers for the keyboard.
  6. restart your computer and Windows will automatically load the drivers for the keyboard.

  If the problem persists even after reinstalling drivers, it is recommended to take your laptop to the nearest Acer service center as it is under warranty. To do this, the following link can be useful:
  http://us.Acer.com/AC/en/us/content/service

  Hope this will help you.