Installation of mIDlet FRDM K64 Council

Similar Questions

• Q:micro SD for FRDM-K64

  Hello

  I want to install Java ME 8.1 on my FRDM-K64 Board and according to the installation guide I need a Micro SD 4 GB memory card (using an SDHC card is not recommended). I'm really bad find such a card, maybe someone knows where I can buy one. I tried RadioShack, BestBuy and Frys with no luck. Will it work with a bigger map?

  Thank you

  Andy

  Yes, Andy, they are virtually impossible to find.

  The design of the non - HC is an older technology.

  Wave memory (and I'm not going beyond a generic Google search) is that both cards have a different density structure.

  I came across this same kind of problem a couple of years with an MP3 player--> SD unnamed worked while SDHC failed.

  As I type this, the website of Newegg has three and only three available for sale.

  The microcenter website and website of TigerDirect have a few available in the US (your reference to Radio Shack suggests that you are there).

  Other people will have to answer to let you knoe if a HC card will work.   I don't know about that.

• Windows XP SP3 - reader DVD - RW 'Incorrect function' on blank CD

  I get an 'Incorrect function' error on both of my readers of DVD - RW on Windows XP. I investigated the issue for a few days and came away empty-handed.

  1. I tried to delete upper/lower filters in the registry. This helped to ensure that they are detected but nothing else.

  2. I tried to update the drivers for the two drives via firmware update. This makes them as readers of DVD - RW instead of just the CD players, but I still haven't burn the ability.

  3. I tried to edit the registry in order to see a 'Registration' tab on the properties of the drive. Even after that change it, the tab never appears. I tried to switch between settings (1, 2 or 3) between each of the two drives, but it makes no difference in the combination.

  4. I ran various "Fix - Its", including one that claimed that the two discs were not able to burn. See #4.

  4. I tested two drives with third-party software, and they work much like the burners. However, the vendor I work with that requires Windows to be able to do the burning. I worked with them and they insist the problem is on my end and revealed no useful. I'll assume it's Windows and not their own software which poses problem.

  Any help would be appreciated.

  If they are IDE drives, SATA, make sure that the jumper pins are correct, if so,

  uninstall both in device mgr, restart, once thru, output, pc shutdown.

  Move the connections on a different IDE slot, reset the pins of the rider as needed, restart

  PC. XP will reinstall their restart. If the connection of different worked, cable

  or card controller pc are bad... In addition, update the chipset installation software

  for the Council, it gives xp drivers software to work properly...

• Reference Dell 966 Photo all-in-One Printer owners thread (W7)

  Please follow the instructions below and then tell me what happens.

  First of all, let us make sure that your computer has the latest Windows updates, especially of .net framework, necessary to run many applications and the latest Java.

  I recommend that you use these settings to the recommended wireless router for better communications.

  Unplug your printer. Download and run this patch to completely remove the printer from your computer. Run the fix, a MUST on Vista machines, until it prompts you to restart your computer.

  If you use Windows 7 also try... Driver Manual printer removal

  Restart your computer.

  Download the correct drivers.

  XP drivers

  Vista 32-bit drivers

  64-bit drivers

  All other drivers

  Install the appropriate drivers. You will be asked when connect you your printer (power on)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  If you use Windows 7, use the Vista drivers in compatibility mode.

  Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Replace the Vista compatibility (try Vista SP2). Then, install the appropriate drivers. You will be asked when connect (printer)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Scanning

  Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

  Scan wireless, use the buttons to scan on the printer.

  Rick

  Reformatting the hard drive and reinstall windows 7 has done the trick. This really delete all the driver files! With a clean machine, I was able to install the printer without problem in Vista SP2 compatibility mode. Not only so, but the other two Windows 7 PCs on my network domestic also saw the printer and installed it.

  It seems that the uninstall utility doesn't work unless you install the drivers correctly. If, as many of us have done, the drivers are installed without using the compatibility mode there are some files that get somewhere the uninstall program cannot reach. I just checked the section of drivers from the support page and can find no reference to installation in compatibility mode, the Council States that it is compatible and install the Vista driver. Always if Dell puts in place all the information, it should would probably be no need for forums like this.

  Just a pity that it took a format and reinstallation of the entire system to operate. Live and learn

  see you soon

• CTS telephone operational status

  Hello

  I'm trying to monitor the operating condition of the IP phone connected to a CTS-1300 via SNMP, however I found that the MIB (MIB-TELEPRESENCE-CISCO) related to this material does not deal specifically of this requirement.

  As far as I could test, ctpPeripheralStatus (1.3.6.1.4.1.9.9.643.1.2.1.1.3) would indicate only the attached status but not telepresence-ready status, which in turn is somewhat different from the point of view of the CallManager (registered/not registered), given that the phone could be registered to CUCM and actually not OK to take calls.

  So what I found an empirical point of view, it is that readiness is obtained when the phone has successfully downloads and installs the MIDlet, which in turn is reflected in the election of the MIB extraction ctpPeripheralDescription (1.3.6.1.4.1.9.9.643.1.2.1.1.2):

  ctpPeripheralDescription

  
  

  ISO.3.6.1.4.1.9.9.643.1.2.1.1.2.2 = STRING: "IP_PHONE - MACAddress = AABBCCDDEE, HostName = SEPAABBCCDDEE, PhoneDN = 1000, AppLoadID = jar75sip.9 - 2-1TH1 - 13.sbn,

  BootLoadID = tnp75.8 - 3-4 - 16BN01.bin, Version = SIP75.921 S, HardwareRevision = 11.0,

  SerialNumber = ABC12345XYZ, ModelNumber = CP - 7975 G,MidletVersion = Transport SPM - 1.8.1 - P1 - 1s"

  ctpPeripheralStatus

  ISO.3.6.1.4.1.9.9.643.1.2.1.1.3.2 = INTEGER: 0

  CtpPeripheralStatusCode: = TEXTUAL-CONVENTION

  Current STATUS

  DESCRIPTION

  "The textual convention identifies the State of the device.

  noError (0).

  Expected device works through

  the port is attached.

  ctpPeripheralDeviceCategory

  ISO.3.6.1.4.1.9.9.643.1.2.1.1.4.2 = INTEGER: 3

  CtpPeripheralDeviceCategoryCode ::= TEXTUAL-CONVENTION

      STATUS          current

      DESCRIPTION

          "The textual convention identifies the peripheral type.

          unknown              (0)  -- Unknown Device

          other                (1)  -- None of the listed device

          uplinkDevice         (2)  -- Device attached to CTS uplink port

          ipPhone              (3)  -- IP phone

  If ctpPeripheralDescription display the software of the phone listed, then it is good. Maybe the status OK/not OK seen through CTS GUI is displayed after an assessment of this kind?

  I have already laid around and did some additional tests along, but apparently it's the only way to properly assert via SNMP simple, if the phone does not work correctly.

  Is there another way to check this?

  Thanks in advance,

  Gabriel

  Hello Gabriel,

  Since you had no response, and yet I'm scanning my archives of memory and what you have concluded matches what is in the MIB, RFC and Message to SNMP trap doc for the CTS systems:

  http://www.Cisco.com/en/us/docs/Telepresence/cucm_cts/cucm_cts_admin_book/guide/cucm_cts_admin_mibs.html

  The displayed phone charge, version midlet and the status of noError (0) of the ipPhone (3) should coincide with no error in the GUI and the phone successfully, showing the midlets and ready for telepresence.

  HTH,

  Paula

• file zip of ESXi 5?

  Hello

  With the help of the host update utility I'm trying to upgrade a host esxi 4.0 to 5.0. He asks the 5.0 file zip, but all I can find are the .iso files. I have the lack somewhere?

  With vCenter Server/Update Manager 5 in place which is the recommended option, the other option is an interactive upgrade using the ESXi 5.0 installation CD.

  Two Councils, however.

  • ESXi 4.0 Update 2 is not compatible with vCenter Server 5, so if use this version and plan to upgrade the server vCenter Server, you must first upgrade the hosts for example ESXi 4.0 update 3. See http://kb.vmware.com/kb/2007269
  • If the hosts have already been updated since version 3.5, you cannot upgrade to ESXi 5.0.

  Please take a look at the guide to upgrade for more details.

  http://pubs.VMware.com/vSphere-50/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-50-upgrade-guide.PDF

  André

  PS: in all cases, you must upgrade to vCenter Server to version 5 before moving hosts!

• Win7 installation is possible on the Satellite A100-551?

  Satellite A100-551 with XP. Is it possible to upgrade to WINDOWS 7?
  Because Microsoft does not support on Windows xp and me advice (Council) to put my PC in Windows 7.

  Is it possible to get?

  Win 7 can be installed on most laptops, even if the drivers are not official released.
  Most often the common Win 7 drivers would be installed automatically during the installation Setup. You should also get the updated driver automatically during the update of the Win 7 system.

• HP 15-r033tx Notebook PC: get the 0xC0000005 error code during installation windows 8.1 x 64

  Please help me...

  I get error 0xC0000005 new installation code copy Windows 8.1 x 64

  When the installation process happens to 87% every time I get an error code saying that the installation is not possible.

  I can't install windows 8.1 x 64 version on my laptop.

  Please tell me how to fix and install windows 8.1 x 64 version on my laptop.

  I tried with dvd - rom and usb as well, but the result is the same... just stuck to 87%...can may not be installed...

  How to overcome it... Please...

  @Achintya only,

  Given that the material all past, and he could install another version of windows without problem, I suspect a problem with the 8.1 Windows installation disc x 64. IT may be a good idea to contact Microsoft about this.

  I did a little research and found this on the equivalent of Microsoft of this Council.

  Install Windows Pro 8.1 (detail) fails in step 2 with the error Code: 0xC0000005 -answers.microsoft.com

  There are a few suggestions on this post you can try.

  I hope this helps.

• WinHlp32 installation fails vista Home premium

  When you browse through the installation of WINHLP32.exe on my VISTA Home Premium SP2 installation research updates for awhile then concludes not valid for my system.

  I installed the X 86 version after removal of all prior downloads

  Downloaded to the desktop

  Started cold

  Execution of Setup and all combinations and it does the same thing every time.

  It seems that it is looking for some update it finds!

  Clues

  Thank you

  Thanks for the info. I should have realized admin was easily accessible.

  Most tellingly, it is that MS may send one on a wild goose chase!

  Let's not the message about the inability for my system.

  On a whim I checked if WINHLP32.exe was on my machine and what you know, its there and works.

  I have discovered some mistakes of not crirical on the audit of the system, but they can wait another day.

  SOooo. First Council must be check if winhlp32.exe has been downloaded, abd it works!

  So ignore the inappropriate if message is.

  Thank you all for your help

• Error code 643 KB954430 installation and manual installation does not work

  Hello

  I had a problem with the update KB954430. He always needs to be installed even if the process was successful each time.
  First I tried to search the Internet for a solution and I followed the advice given by a single site. (Vistaheads.com)
  The Council is as follows:
  "
  Microsoft Help/Support

  Step 1: Download Microsoft Windows Installer CleanUp utility

  =============================================

  1. visit the following link to download the utility:
  http://download.Microsoft.com/downlo...BD/msicuu2.exe

  2. save the file on the computer.

  3. install this tool on the computer.

  Step 2: Remove the MSXML software

  =========================

  1. Click Start-> (all the) programs-> Windows Installer Clean Up.

  2 see if you can find MSXML software. If so, remove them.

  3. restart the computer.

  After that, please try to reinstall MSXML 4.0 Service Pack 2 and MSXML 4.0
  SP2 security update and KB927978 KB925672.

  Step 3: Reinstall MSXML 4.0 Service Pack 2

  ================================

  1. Please download MSXML 4.0 Service Pack 2 and the related updates of the
  links and save them to the desktop.

  MSXML 4.0 Service Pack 2

  http://download.Microsoft.com/downlo...629C/MSXML.msi

  MSXML 4.0 SP2 (KB936181) security update

  http://download.Microsoft.com/downlo...936181-enu.exe

  2. when the file download window appears, click the button Save, and
  follow the directions to save to the desktop.

  3. After downloading the file installation of MSXML 4.0 Service Pack 2 and its updates
  on the desktop, please double-click the files to manually install a
  by one.

  "
  I followed exactly the instructions given by the site. I installed Windows Installer Clean Up, I then found three software MSXML and removed all three of them. Then, I downloaded the two files, msxml.msi and msxml4-KB936181 - enu.exe and installed in the order previously cited.
  However, after that when I tried to install the windows update update recommended and I got error Code 643. I could not even install successfully the update more. I tried a manual version of the update, found and downloaded the file msxml4-KB954430 - enu.exe.
  When a manually run the program, this is the error message that appears:
  "Could not open key:
  UNKNOWN\Components\7A17F1B46C057B443ADA6B3C75B48B69\DDA39468D428E8B4DB27C8D5DC5CA217. Check that you have sufficient access to that key, or contact your support person. »
  I am running Windows Vista Home Premium 64-bit on a laptop Acer Aspire 6930.
  And running out of ideas on how to solve this problem.
  Help, please
  Gabriel

  Hello

  Go to the free support, however check in Windows updates to see if it is already installed and also the
  KB article to see if you still need (and there is a good change that you do not and that is why it will not
  install - it happens).

  It's this update
  http://support.Microsoft.com/kb/954430

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  I plan to upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  my PC configuration is like below:

  Card mother Intel DH61WW
  Processor Core I3 2100 3.1 Ghz
  4 GB OF DDR3 RAM
  Seagate 1 TB SATA HARD drive
  OS: Microsoft Windows XP Professional SP3

  I run Windows 7 upgrade advisor in which some results below the incompatibilities:

  Intel (r) 6 Series / C200 Series Chipset Family SMBus Controller - 1 22
  Unknown Intel we have not the compatibility information about this device.
  Intel 82579V Gigabit Network Connection
  Unknown Intel we have not the compatibility information about this device.
  Realtek High Definition Audio
  Realtek unknown we have not the compatibility information about this device.

  Here's my conceerns:

  What needs to be done to overcome the problems of incompatibility?
  Do I need to download new software files compatible for windows 7 and then install
  for example VLC media player, Skype, MySQL Server I am running
  or currently existing files are compatible to install with Windows 7?

  Would I be able to upgrade to windows 7 without any problem and safely?

  Could you please help me with the questions above?

  Please correct me with additional suggetions that I may have missed with.

  Looking forward to hear from you

  Thank you

  You understand that you will not be able to upgrade Windows XP to Windows 7?  He will have to do a clean install.

  The Council supports Windows 7, you can get the drivers here (the chipset drivers should be the first drivers you install after installing the operating system.)

  John

• How to install drivers for Pinnacle StudioMovie Council?

  Original title: someone knows how to correctly install the drivers for Pinnacle StudioMovie Council.

  This multimedia Board with an earlier version and Windows XP penalty, but since I upgraded to Studio15 and Windows Vista 32-bit, it does not. Any ideas?

  Hello

  1. you get any error message?

  2. What is the number of number\version of exact model of the device you're using?

  We need to check if the device\program is compatible with Windows Vista

  Please follow the steps below.

  Method 1:

  Click on the link below to check compatibility.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=hardware&s=Pinnacle%20StudioMovie%20Board&page=4

  Method 2:

  Please try to install in compatibility mode using the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Method 3:

  Please use the link below to run the Microsoft Fixit.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Alternatively, you can contact Pinnacle support forums to get the correct installation procedure

  Click on the link below.

  http://forums.pinnaclesys.com/forums/default.aspx

• problem with the configuration of the product after installation

  I installed the HP of CD printing software. At the end of the product configuration is not Council supplementing and error appearing after a while showing 'Error loading' and automatically not to restart to complete the installation. Why?

  Gorla,

  You can try to download the software from the website of HP printers as the installation or the file that you are using may be corrupted.

  You can also get in touch with HP support for assistance.

• 907 invalid JAR: class non-public Midlet: gui

  Hello

  I had no problem with the installation of the application OTA or Desktop Manager before, but all of a sudden, the OTA stopped working with the above error. (I have also see the message "this application does not contain a signature. (It is not a reliable source"when I already signed the request)

  'mistletoe' is the argument that was passed to the other entry point (a graphical interface, of course). I read the developer articles and tried to change the MIDlet-Jar-Size 0, removing all the project files and build a new one, etc etc, but I don't know how this has suddenly stopped working.

  Anyway, how is 'gui' a midlet then class is only the alternative input for CLDC application argument? This disturbs me. Help, please!

  Manifest-Version: 1.0
  MIDlet-Version: 1.0.1.8822
  MIDlet-Jar-Size: 140053
  Microedition-Configuration: CLDC-1. 1
  MIDlet-Jar-URL: SyncMy.jar
  RIM-COD-Module-dependencies: net_rim_cldc, net_rim_xml_org, net_rim_xml, net_rim_locationapi, net_rim_bbapi_options
  RIM-MIDlet-flags-2: 0
  RIM-MIDlet-flags-1: 3
  RIM-COD-Module-name: SyncMy
  MIDlet-name: SyncMy
  RIM-COD-size: 60576
  RIM-COD-creation-Time: 1239491930
  MIDlet-2: syncmygui, icon.png, gui
  MIDlet-1: SyncMy.net
  RIM-COD-URL: SyncMy.cod
  RIM-COD-SHA1: 1st ab 41 4 d f8 bc d6 7B 5f d4 be cb 9 a 09 ca 12 a6 94 99 db
  Microedition-profile: MIDP-2. 0
  MIDlet - Publisher: SyncMy Ltd.

  Oh, it was a CLDC application

  It happened because I used the wrong file when loading OTA - it should be instead of .jar .jad

  On the issue of 'half of the lost functions', it's because one of my sons would not start until the powerUp() method has been discharged - it wouldn't happen because the unit will not restart when installing OTA.

  I made the false assumption that everyone settle down with Desktop Manager and the device would always restart - which is not true.

• jar converted to cod - a newer version of my midlet does not appear on my curve

  I'm having a strange problem. I have developed a J2ME Midlet and was converted into a COD file for installation on my curve for almost a year. For some reason any, when I install the latest version of my program, the icon does not appear on the screen. However, I can see it listed in the screen of applications (Advanced-> Applications). Also, what is strange, is that if I try to assign my application to a touch of convenience, my application does not appear in the list.

  What could be wrong? Everyone out there never go through this before. I tried to use different versions of the CAP to convert my pot for a cod, but it does not help. Something I made in the new version of my program has caused this, but what?

  BTW - I use Netbeans with WTK 2.5.2

  I thank in advance for any help you can offer.

  Ah... I see...  Yes, deadly refactoring...

  I actually get very close on mine now...  I finally got an icon in 'Downloads', but it's the default icon instead of the icon of my app desired...  Now, the icon is there and showing my desired icon png file, but the application does not open "IllegalArgumentException", lol...

  I think that this link may shed some light on your problem...  Looks like this guy had a problem of version control with the JDE components he used...

  http://www.BlackBerryForums.com/developer-forum/128653-no-menu-icon-after-installing-application.htm...