Satellite L500-1WG - wireless on battery problems

Similar Questions

• Satellite L500 - 1WG PSLS0E - impossible to reconnect wireless

  * Computer info: *.
  Satellite L500-1WG - Partnummer: PSLS0E-07502EN5

  Windows 7 Home Premium

  The drivers are up to date:
  -Microsoft Virtual WiFi Miniport Adapter version - date driver 21.06.2006 - 6.1.7600.16385
  -Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC - 30.07.2010 driver date version - 2017.2.730.2010
  -Realtek PCIe FE Family Controller - 23.06.2010 - version 7.23.623.2010 driver date
  I disabled the "allow the computer to turn off this device to save power" for all 3 of them.

  * Problem: *.
  When I start the pc, it connects to my wireless router as usual, but then after that 30-60 minutes it stops working. He always finds the wireless router and the signal is excellent (4-5 bars), but when I try to connect it gives me the error message that it is impossible to connect to my router.

  If I restart the PC, it is always impossible to connect.

  But if I turn the computer completely off and leave it for a while, it works when I start it again, which suggests that he may need to cool (we noticed that the computer is warm enough, and that the fan is spinning a lot... but that could have been the same before - just that we it has not noticed that it was not a problem)

  ... But if I only it hibernates and let it cool for a while, it does not work to reconnect when I start again.

  I did a test earlier: I started the computer and made sure the wireless connected - then I put into hibernation and he did it again, and after that, he was still unable to connect. Then I stopped had and turned on the right now - and then it works fine.

  It's the same question at the local library, but my in-laws it worked fine for 2-3 hours the other day.

  My other pc that runs on Ubuntu, works without problems on our wireless.

  Any ideas?
  -Is it a virus?
  - Or my card network is not able to take the heat (material)?
  - Or is this a bug of Windows/driver (software)?

  I plan to reinstall windows, but before crossing with whom I was wondering if it's worth the hassle... Is it a hardware error, and should I just go directly to the seller?

  What you can try is updated the BIOS. Latest version is installed on your laptop?

  Another question: where you find WLAN driver version 2017.2.730.2010?
  Toshiba's latest version 2015.1.0427.2010?

• Satellite L500-1WG - how to use the modem internal?

  I am new to computers and laptops and that you just bought the Toshiba Satellite L500-1WG. I was told, in the shop, he has an internal modem?

  What should I do to activiate/get connected to the internet? Do I need an external modem wired or wireless as well? No difficult language or abbreviations please, I am a total novice with very limited on this subject knowledge. Have only to learn how to start and run the basic set up.

  HEY buddy,

  > Told me, in the shop, he has an internal modem?
  It seems that this shop doesn't know what they are selling or they wanted kid a small round little

  It turns out satellite L500 is not equipped with modem and it doesn t have a modem (RJ12) port.

  So if you want to use the modem connection, you must purchase an external. But for now he s not advised to use a modem, the majority of the pages are not designed for modem more.

• Satellite L500-1WG - black screen, turn on

  Hi all

  I am looking for some advice,
  I'm far from being a computer whizz but know my turn well enough. I put my model below.

  No apparent reason, I have the black screen.
  The laptop was working fine yesterday. Windows has shut down the computer automatically to install an update. Since the laptop this morning train, nothing.
  The power lights, flashing web cam, windows sound times.
  No courier. But nothing
  I can even enter my password and it is registered on. I tired to fix battery, but it did not work. Thanks in advance to all who wish to help!

  my model is
  Satellite L500-1WG
  Part number: PSLS0E-07501DEN

  Main features
  Genuine Windows 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery) and
  Genuine Windows 7 Home Premium 32-bit (pre-installed, Toshiba-HDD recovery)
  -Intel Pentium processor T4400
  -DVD - RW SuperMulti drive (Double Layer)
  -RAM (1066 MHZ) DDR3 4096 MB 2048 + 2048
  -39.6 cm 15.6 "TruBrite HD 1366 x 768 display high brightness with backlight LED with aspect ratio 16:9

  By pressing keys FN + F5 allows to switch between the internal and external screen.
  I recommend you connect the external monitor (or a LCD TV) and press the keys mentioned in order to verify if the external display will work properly.

  But I'm a bit confused... you said you were abele to enter the password...
  You see the field for the password?

• Satellite L500-1WG - Windows Media Player does not display my library

  Can anyone help?

  I have a Satellite L500-1WG, I ripped out the music in my music (the default setting), and it does not show in my media player library. I spent hours trying to figure this

  Hello

  I think you should check the settings of the Windows Media Player library. In Options > library, you can choose the files that need to be monitored. I think you should monitor the folder where you have added music.

  Check this box!

• Why the DVD jerky on my Toshiba Satellite L500 1WG?

  Images are missing when I play a DVD on my Toshiba Satellite L500 1WG.

  Make sure that the video driver is updated.

  What application you're using to play the DVD?

• Satellite L500-1UU - disconnect the battery when it is connected to the AC adapter / CC

  Hello world

  I have purshaced new Toshiba Satellite L500-1UU
  CPU: Intel (r) Core i3 CPU M330 2.13 GHz
  Physical memory: 4096MB RAM
  Microsoft Windows 7 Home Premium 6.1.7600

  My question is: remove the battery when I use my computer laptop while its connected to the AC adapter would be wise or not? This would increase or decrease the life of the battery, or it will not affect anything?

  Is i3 processors have a technique of centrino disconnect battery power whent, it is fully charged?

  What do you think of this?

  Hi Khaild Essam,

  I agree with Akuma. There is no problem, remove the battery when the AC/DC adapter is connected. If you can do it. In addition the battery charge will be stopped if it s at full charge. The laptop consumes energy to AC/DC adapter only.

  If you remove the battery and work with AC/DC adapter only, the battery life will be improved a little because it s not in its use.

  I found an interesting document for you:
  [How to get the most out of the battery | http://aps2.toshiba-tro.de/kb0/HTD9401AZ0001R01.htm]

• Satellite L500 - stop and a fan problem

  Hello.

  A few months my Toshiba Satellite L500-1 stops frequently due to overheating, which occurs when the intensive use of the laptop (for games, photomanipulation etc..). However, I don't know what I can do about it. I won't open my laptop, unless I am told to open my laptop computer to perform a specific task.

  Today, my cell phone off again. However, when I turn back I noticed that something happened with my fan. At this point, my laptop doesn't overheat not quickly as usual. Instead of 90 + % fanspeed there around 58-60% (depending on the Toshiba PC Health Monitor). However, I noticed that something happened with my fan. After that I noticed that the fan will sometimes be a trigger, that sounds once every 10 minutes when the laptop is under heavy use.

  What should I do now? It worries me, I'd be worried about it? Perhaps another user from Toshiba with a similar problem can give me support. I'd be happy.

  Thank you.

  -DR

  Hello

  On this virtual path, it is not easy to say what may be the problem.
  When you use your laptop do you use desktop space?
  Do you use it with power supply?

  What power profile do you use when laptop stops?
  Have you tried changing the settings of food or something else?

  Before you start using it intensively have you tried to terminate background processes, disconnect the devices, just to see if that will help?

• Cannot Flash the BIOS on Satellite L500 due to low battery

  Hey all,.

  Obtained as Satellite L500 (PSLS0A-084002) here. I have the battery not charging issue and everything what I find point to an update of the BIOS.

  Of course, there is a new BIOS for download from the drivers of laptops. So I have the file WinPhlash "sl500 (mv) _bios_w210.exe. However, by running the fact falling before flashing the BIOS with an error number: 144.

  It is because of the battery is bellow 10% charge however I can't it above 10 percent fee that the laptop does not recognize it.

  There must be a way of to WinPhlash running without check. I read that you can run it with the "/ forceit" switch and who will be ignoring the error, but that was for some time and it seems WinPhlash have changed this as she always spits the error.

  I read running back help but after creating a boot cd back, he claims the exe cannot be run from BACK (ffffuuuuuuuu!).

  Any help appreciated. Thank you =).

  Maybe it sounds silly now but there at - it something serious, why you want to update the BIOS on your machine? I mean if everything is OK, why do you need new BIOS?

  In any case, I'm don't know if this will help but please try to remove the battery and check if the update of the BIOS starts if your laptop works on AC only.

• Cannot connect my Satellite L500-1WG to Wi - Fi router Netgear

  Hello

  I hope someone can help as Im pulling my hair out. Just replace an old Wireless ADSL router/modem to a "n" wireless Netgear DGND 3300 range Max Dual Band router ADSL. Everything is connected by ethernet to my Office PC Ok. Just bought a laptop L500-1WG with 'n.' compatible wireless card

  Hope to connect to the 802 1.1n 5 Ghz to speed things up and increase will however the laptop cannot find the adapter 2.4 Ghz 'G' and its driving me wild! Ive downloaded the latest drivers and checked in the device manager that "n" is selected. I messed around with the settings of the modem to the router and it seems to all be OK but can not connect, someone at - it ideas? Thought I would have the ability to connect via G or N...

  Your help is appreciated...

  And what is with the settings of the WLAN router? You are using auto option or you have assigned it N only?

• Satellite L500-1WG: network card works no - 31 code

  Hello!

  OS: Windows 7 / 64-bit.

  I try to connect my Satellite L500 to WNAP A-Link 802.11n WLAN AP ROUTER 3 G via an adapter (Intel 82567) without success.

  Under the general tab device manager says "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) ». Then I updated driver-> Windows has determined the software driver for your device is up to date. Always the same message coming in general tab.

  Anyone have similar problems?

  Sitiper

  Hi mate

  This device doesn't work properly? Is - this WLan or LAN card?
  I m a bit confused but

  As far as I know the LAN and Wlan cell phone support for Realtek card.
  So, you can download the two drivers from Realtek page directly.

  Please set the BIOS to the default settings before you relocate for the two pilots.

  I hope this will help you!

• Satellite L500 - lost wireless connection

  My Satellite L500 recently lost the wireless connection. I looked towards the top of the Realtek wireless device in Device Manager and it says that the device is functioning properly. I tried to use "ping 192.168.1.1" join the router, and I get "error Transmit - general failure."

  Any ideas?

  Hey Buddy,

  And now Windows recognize some WIFI networks at your fingertips? Your validation lost wireless connection isn't very useful

  You should try a WLAN driver update that you can download from the official page of Toshiba:
  http://APS2.toshiba-tro.de/WLAN/

  If you can't find or connect to WLAN networks deactivate in the Windows of the WLAN power save mode power profiles. You will need to set for maximum performance.

• Satellite L500-1WG WLAN WNAP A-Link connection gives 'blue screen '.

  Hello!

  OS: Windows 7 / 64-bit.

  I try to connect my Satellite L500 to WNAP A-Link 802.11n WLAN AP 3 G ROUTER via WIFI (Realtek RTL8191SE). Connection is established, but after a few seconds, I'm going to 'blue screen' and restart the laptop.

  A-Link WIFI connection works very well with my Nokia X 6 phone (S60).

  Any help?

  Sitiper

  Hello

  BSOD code, you get exactly?

  Have you tried to update the driver WLAN? You can find the latest version on the Toshiba WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN/

• Satellite L500 - no wireless connection

  Hello

  I bought 2 notebooks to Christmas for children, but cannot get them to connect to the wireless connection.

  I contacted Toshiba helpdesk and they want to contact me my internet provider.
  I'm a bit confused at this but as I have other laptops and they had no problem.

  I can see the connection, but it wont let me connect saying something like "(Impossible de se connecter àle réseau local sans fil-c-15) '? '."

  Laptops are L500 and I tried to update the driver but there seems to be a problem with that too.

  Any help would be greatly appreciated.

  Hello

  First of all it is important to know if your router is configured correctly.
  The WLan router must be configured with all the data from ISP (internet service provider).

  You said that other laptops can successfully connect to the Wlan router, so I guess that the router is configured properly.

  Now, you should check the WLan settings books;

  -WiFi must be enabled. To do this, you need to use the FN + F8 key combination. The small Wlan icon will appear.
  -After that, you have to choose; you will use own WLan configuration options of Windows or you must use a third-party tool 3rd as utility of Atheros Wlan or Intel Proset wireless wifi connection utility.
  -WLan parameters must contain the right SSID (name of the Wlan), the right encryption and password.
  -In the WLan connection TCP/IP Protocol, IP and DNS settings must be defined to automatically get
  -The MAC address filtering should be disabled in the router configuration if you don t want to insert the available wireless network cards unique MAC addresses

• Satellite on Mini L9W - B - battery problems + hibernate option

  Hi there, first time poster/toshiba user here...

  So I got my mini click about 2 weeks ago... but from the first day the battery does not seem to charge directly.

  The Tablet battery would charge very well and would be up to a full 100%.

  Then the keyboard battery would start to load and show he's in charge, but he would stay only in this way, the percentage of the battery in the keyboard levels would not rise.

  The combined batteries would be a total percentage of 51% level and never more. And when I unplug the charger the battery of the Tablet were starting to ODS of. The keyboard battery would always show 0% if hooked up or not.

  I have updated BIOS 1.6, update, reinstalled windows to original settings and even tried the suggested continuous load here and also proposed by customer support 24 HR but nothing has changed.

  I'm a little at one end with that like as I'm living in Singapore, I can't send it sent to be repaired as it is not under warranty here (they don't even have hardware/software for her apparently) and it will cost me $150 just for them to watch.

  I was told by tech support when I discovered the problem BIOS 1.6 would solve the problem. But he didn't... and a little weird as they took update BIOS 1.6 a few days after the release of it.

  A little frustrated because I like really the laptop (perfect for on-the-go/travel).

  Another thing I would like to ask, is this model has a Hibernate option? I looked in the manual and it says that it is a he, but all my attempts to try to activate the Hibernate option gave no results.

  I hope someone can help me!

  I think the battery charge question could be linked to the BIOS and my experience an update of the BIOS (the next version should be v1.70) should solve the problems of charging the battery...

  I think that you should pay attention to setting notifications to date that appear in the software Toshiba Service Station... and I think you need to perform this update of the BIOS after releasing.